Best 73
Giorgio IK1BXN
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KAT-fw-1-58-auto-or-manual-use-KAT3-in-bypass-or-in-auto-tp7584672.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft
KPA caused by the unused cable length.
I ask if it is available or from Elecraft (better) or from any other dealer
a shorter cable (I think 1 ft length) I could use to safely connect KAT with
KPA.
Many thanks, best 73
Giorgio - IK1BXN
--
View this message in context:
http://elecraft.365791
Hello !
Finally I bought a k2 and on today I tried downloading manuals from tha site
but I couldn't because download starts but never complete.
Should it be my local problem or are there problems with download session at
the site ?
Many thanks, best 73
Giorgio
--
View this message in context:
SWR reading at KAT
and k3.
73 - Giorgio IK1BXN
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KAT500-tp7579220p7579231.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home
.
Should it be correct ? Should it create any problem or damage ?
Hoping to have been clear enough, thanks a lot for support
Best 73
Giorgio - IK1BXN
--
View this message in context:
http://elecraft.365791.n2.nabble.com/k3-kat500-pr6-DigiKeyer-via-2-Y-cable-in-cascade-should-be-OK-tp7573626
Super ! Fast and shape answer as usual !
Thank you all very much for support, I'll proceed this way so. I just asked
Elecraft italian dealer to supply me one original Y cable in order to
avoid any possible surprise.
Best 73
Giorgio - IK1BXN
--
View this message in context:
http://elecraft
Hi ! I'm having crazy (probably that) idea : should it be possible to use
P3/Svga in DxLab WWW as if it was an external device such as KAM or PK232 or
whatever similar ?
I'd like to leave k3 decoding and encoding PSK31 or RTTY FSK and having and
external software/suite it would mean IMHO to be
Thanks Joe and Don for answer.
No Don, I think to a terminal data exchange between p3 and an external
application that can manage/integrate current date. The encode/decode job is
inside k3 and inputs/result are available on the serial port. Something like
a modem.
Into other words the pc running
Are there any news about utility bug fixing ?
Thanks and 73
Giorgio
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KAT-500-how-to-modify-Autotune-threshold-Apparently-I-can-t-tp7566617p7567026.html
Sent from the Elecraft mailing list archive at Nabble.com.
Super !
I just installed KAT Utility new version and it works perfectly and now I
can set tune threshold as I like (inside the planned range of course).
Many thanks Dick !
73 - Giorgio
--
View this message in context:
I like very much KAT, it's fast shape and reliable for what I saw right
nowbut as I came from a Drake MN 2700 I strongly feel the fault of
something telling me at a glance if and how much RF power I'm really putting
RF into the antenna. Previously I had a wattmeter now I've to trust the
online
Hi guys
I'm KAT 500 fresh owner and I was trying to touch Autotune threshold
changing it from 1:1,80 to 1:1,60 for example. It happens that any value I
digit as soon as I press Apply and Save checking again it comes back to
default 1,80. Trying a per band set instead of All Band nothing changes.
Yes, but there's something funnyif you go to download KAT500 Serial
Command Reference the document refers to 01.16 FW dated 16 November 2012,
probably there's a new FW release incoming and perhaps fixes this bug.
Giorgio
--
View this message in context:
Thank you very much Dick, take your time we can easily workaround by sending
ST command.
73 you all one more time confirmation (if needed HI) that's the
wonderful Elecraft world !
--
View this message in context:
if no antenna is connected to the rig) and why not shorting to ground all
ports at power off.
Are there any plan for such an object in Elecraft ?
Many thanks for reading, best 73
Giorgio - IK1BXN
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Antenna-matrix-switch
Hi guys, I'd like to suggest you a small (a sort of dome 50mm diameter and 40
mm heigh when opened) stereo speaker system for kx3 mobile operation.It has
internal battery rechargeable via Usb.A retractable cable long enough it's
supplied with the object.I just received it and connected to my kx3.
this interface here :http://www.g4ilo.com/usblink.html
73 de Giorgio IK1BXN
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX3-and-Data-Mode-Interface-tp7382234p7557779.html
Sent from the Elecraft mailing list archive at Nabble.com
Ciao Marc , are you shipping to Italy and in case could you tell me please
cost for shipping ? Last latest price to let me able to check with my budget
? Thanks a lot, best 73 and season greetings de Giorgio IK1BXN
--
View this message in context:
http://elecraft.365791.n2.nabble.com/FS-K-1
like to have this new firmware release for my
k3.possibly.
Thanks a lot for all, best 73
Giorgio IK1BXN
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-and-HRD-turning-AGC-off-tp6340160p6960459.html
Sent from the Elecraft mailing list archive at Nabble.com
Thanks a lot to all for support.
Dave you helped me very much you clarified doubts I had. Sorry I forgot
telling you I'm using VMFusion to virtualize XP.
Dave in case of further need may I ask you via e-mail (by using the address
at qrz.com) off this reflector?
For logging I think I'll go to
Hi guys.
Even if I like very much HRD I decided to stop with it due to stressing
faults (I really hate) in serial communication that suddenly and frequently
cause AGC going off.
I'm a Mac user and right now I virtualized at it an XP Pro just and only to
run HRD.
I'm planning to move to a 100%
Even if my name is not Don...HI I'm posting the way I use to work psk31.
normally I keep 2700 Hz bandwith in order to have the waterfall at a glance.
Then if ther's a track that I want insulate from the rest of the world (for
example because it's a weak trace or there's a very close strong track)
Bill , maybe the empty volume in the P3 will be used (I hope soon) to
accomodate some new features that are relative to existing holes in the
back panelI hope ;-). I share the suggestion for a new box with K
Linee look containing a power supply and speaker(s) as 2 speakers are
required to
dying to have tx functions/features that involves some back
opening ;-) 73 - Giorgio
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3-development-tp6517565p6520689.html
Sent from the Elecraft mailing list archive at Nabble.com.
Hi ! In consequence of my shack layout my k3 and p3 are located above the LCD
monitor in a good position for me to look at them but not so confortable to
press button or rotate knobs. It's not a big problem because I always keep
Ham Radio Deluxe opened for log and CAT so quite never I need to
Hi you all! As I'm used to keep Ham Radio Deluxe opened for k3 CAT even when
I'm in cw, I wonder if anybody added to HRD screen the possibility to switch
on/off the APF (I mean by creating a new button or in any other way). Many
thanks in advance, 73 - Giorgio
--
View this message in context:
Just to add a suggestion more to what Rick told you that's perfect, maybe
it's not your case but did you place Signalink internal jumpers in the
proper position respect the cabling you are using to k3 ? I told this
because when I moved from IC 756 to k3 I risked to forget correcting the
jumpers
In the past (in other situation and not k3 vs HRD) using shielded cable for
serial connection and connecting its shield to signal ground ONLY at one
edge (leaving shield disconnected at the other edge) helped me to fix noise
capture. Maybe this may help also in this case. 73 to everybody
--
View
ooops please apologize me ! I did mistake during translation in my mind , I
ment chassis ! sorry for the confusion I may have created. Thanks Jim for
correction ! 73 to everybody e grazie
--
View this message in context:
Thank you Joe for clear analysis and explanation
73
Giorgio
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Suggestions-Considerations-speaking-of-digimodes-functionality-tp5982524p5990017.html
Sent from the [K3] mailing list archive at Nabble.com.
I share what Julian wrote 100% . My question was only oriented to take care
of my rig . k3 makes the difference, not only in rx ! I have a vertical
multiband antenna that works fine but it's a vertical, however k3 let me to
receive and decode even weak signals. In tx k3 has a clean and perfect
Hi Joe, maybe translating from italian into english I did not explained in
clear way what I mean, I'll try to clarify.
Usb : I'm not suggesting to integrate a conventional 232/Usb converter
inside k3 (even if it would be possible to do by cabling all the firmware
necessary to have everything
Sorry I forgot explaining what I think suggesting Ethernet interface :-)
1) As any recent network device (switch,router,access point and so on) I
think it would be useful and maybe original having inside the rig a web
engine. Having this feature you could by simply opening a web page via
browser
and attention !
73 de Giorgio IK1BXN
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Suggestions-Considerations-speaking-of-digimodes-functionality-tp5982524p5982524.html
Sent from the [K3] mailing list archive at Nabble.com
by the way I wonder, without having a certain indication to trust right
now, what should be the suggested maximum RF power in PSK and RTTY , without
taking the risk of stressing finals. Could you give me an indication ?
Normally I stay at 40-45 wI feel (or better I hope) that's ok
Many
Thanks you all for clarification (fast and shape response as usualthat's
wonderful)! 73 de Giorgio
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Observations-Digital-Modes-and-SSB-tp5976035p5983831.html
Sent from the [K3] mailing list archive at Nabble.com.
Hi you all, I'm trying to download latest version for k3 Utility (1.4.1.8) in
order to upgrage my k3 fw but browser says the page does not exist. Are
there any problem at Elecraft web server ? thanks in advance,73 de Giorgio
--
View this message in context:
Many thanks Dick for fast response. 73 and good w/e , Giorgio
--
View this message in context:
http://elecraft.365791.n2.nabble.com/k3-Utility-1-4-1-8-download-problem-tp5950870p5951143.html
Sent from the [K3] mailing list archive at Nabble.com.
Yes, it works now, thanks for fixing and feedback !
73 de Giorgio
--
View this message in context:
http://elecraft.365791.n2.nabble.com/k3-Utility-1-4-1-8-download-problem-tp5950870p5951531.html
Sent from the [K3] mailing list archive at Nabble.com.
Ciao John, I quote 100% what you wrote ! My dream should be to use the
fantastic P3 also at tx time having there all info it's useful to have in
order to be sure that tx is optimized.
I intend P3 as a powerful measurement instrument not only a panoramic useful
device .Right now you have to buy
Hi guys !
I noticed P3 is out of game at tx time, in rx it is simply wonderful. I
wonder if it should be possible/useful/intelligent to display at it during
tx time info such as :
RF power
SWR value
ALC value
in big fonts in order to read values at a glance
Wonderful ,in my opinion, it should
Thanks Wayne. Yes, just looking to the rear panel I thought vector wattmeter
(or something like that) maybe is already in plan :-)
73 Giorgio IK1BXN
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3-in-TX-consideration-suggestions-maybe-stupid-tp5925385p5925562.html
Sent
Hi Fred (I think this is your firstname) yes I wonder if there is a way to
copy the configuration info. I see there's another utility called K3_EZ that
many collegues appreciated, but I did not try it right now.
My question starts from this: I noticed collegues having problems setting k3
for
Hi Fred (I think this is your firstname) yes I wonder if there is a way to
copy the configuration info. I see there's another utility called K3_EZ that
many collegues appreciated, but I did not try it right now.
My question starts from this: I noticed collegues having problems setting k3
for
Is it a way to dump to a file the current k3 configuration ? I think to all
settings, for example to activate digimodes with my Signalink interface I
touched mode, line level input and so on. My goal should be to have a
reliable restore point to rollback in cause of my errors during future
I'd like to share 100% what David said : it's simply amazing ! Like him Santa
(my wife HI) brought P3 to me (assembled but's the same) and since the first
time I switched it on ... I'm keeping on surprising about how much is useful
this device connected to my k3 ! Thanks to Elecraft one more time
Hi!I wonder the purpose of Menu button in the HRD screen, maybe somebody
uses HRD suite for digimodes and may help me. Is this button deputed to
retrieve current k3 configuration, show it in a friendly graphic view and
let the user to make modifications ? Many thanks in advance ! 73 de Giorgio
--
Many thanks Jens ! On today I pressed it thinking it was a way to access menu
as the front k3 panel...but watching what it was doing I thought oh
noo HRD is modifying k3 configuration in such way feeling worried
! Now thanks to your confirmation I feel better as I did not touch anything
Hi! For digi modes I put my k3 it into Data Mode and I use a Signalink Usb
external interface rear connected. Everything' s working but I'd like
suggestion to verify that I set properly Signalink interface output level
and/or rear input k3 level control in way I have a correct and full
Thanks a lot Don for the quick, clear and exhaustive suggestion you just gave
me ! I just went to see and my regulation was 90% ok, now it's ok (4 bars
and 5th occasionally flickering). No I did not need to place the jumper to
increase output signal. Day after day i must say this rig is
On my Mac I virtualized an XP Pro machine just and only to use Ham
applications (such as Ham Radio Deluxe, K3 Utility UI-View and so on) that
are very often written for Windows :-( . 73 de Giorgio
--
View this message in context:
Hi you all! I own a k3 since 3 days so probably what I'm writing should be a
stupid question, sorry for this. It happens that in 20m band I can center
(or better shift) filter from 400 Hz to 4000 Hz, in 15m and in 10m I can
only between 1100 Hz to 4000 Hz. I'm sure I did some mistakes during
Sorry I forgot telling it happens in Data Mode. 73 de Giorgio
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-filter-centering-different-behaviour-from-band-to-band-tp5596637p5596688.html
Sent from the [K3] mailing list archive at Nabble.com.
Hi Dave, thanks for quick response. No, I change band via Cat command by
using Ham Radio Deluxe, the suite I use for digi modes. Now tried to change
band by using the k3 front button but it's the same:moving Shift knob I
can't choose less than 1100 Hz in 15m and 10m. It's just from the HRD
Bingo !!! It was that ! in 15m and 10m I had AFSK A instead of DATA A I
had in 20m. Correct now it's is OK. Many many thanks to VE3KI Rich and
VE3FPR Don for suggestion ! As I thought playing with the new toy like a
children on Christmas morning I made different setup without thinking it's a
55 matches
Mail list logo