instead of pressing M1, M2 and so on. I know N1MM and Writelog
both support the keyboard option.
Hope this helps
Rich
On 1/14/2024 15:53 PM, Eric Rosenberg wrote:
I'd like to use the My K3's DVR instead of N1MM+ for the upcoming NAQP
SSB contest.
I have a question:
Do I have
Rich
On 11/5/2023 23:27 PM, Richard wrote:
OK, good idea.
1. I tune the DX station normally.
2. I tap A>B to copy A frequency to B.
3. I press and hold SPLIT to separate RX and TX.
4. While holding REV I tune about “five up” or wherever the DX is listening.
5. I release REV and I see the D
It is quite simple just long press the A>B button and you will be in
SPLIT mode.
Tell us what you are doing that is not working
Rich
PS - I believe Crossband Split is not possible w/o a SUBRX, but not
within the same band.
On 11/5/2023 21:59 PM, marvwhee...@nwlink.com wrote:
Richard:
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
Folks,
Can anyone give me some direction on how to program the PF1/2 keys to
change power?
I have no issues programming these keys from the Config Menu but I am
having trouble setting fixed power settings.
Rich
K3RWN
__
Elecraft
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
Which Elecraft cable are you using a USB to serial adapter (K3) or a USB
cable (K3S or updated K3)?
Rich
On 2/23/2023 15:20 PM, Don Putnick wrote:
I've been using WSJT-X FT8 for years using VOX. I have a MacBook Pro and an
Elecraft K3. I've been encouraged to try using Rig Control.
I have seen this on mine. I have had two different issues that caused it:
Key Jack needs re-seated (as already stated)
Comport with a hanging DTR/RTS (not sure which) - fix is to reboot PC
Rich
On 2/19/2023 13:52 PM, D Remy wrote:
Any suggestions about getting rid of the error message
I am interested if anyone has a relay circuit design/suggestion to use
the Key Out jack on the K3 to activate a light during TX?
I have a few ideas but thought I would ask the masses.
Please respond direct so as not to clutter the mailing list with a
slightly off-topic message
Thanks
Rich
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
That’s why I used a .us domain rather than the more common TLDs. I think I was
charged the princely sum of $25/year for the .us TLD. :) Cheap at twice the
price.
72,
Rich Hurd / WC3T / DMR: 3142737 / SOC #1221
Grid: FN20is
> On Jan 23, 2023, at 20:43, Dave New, N8SBE wr
I just used my ISP and created a domain with my call sign. They take care of
all the crap and I get a custom domain. :). Cost is trivial. I forget what it
is though.
72,
Rich Hurd / WC3T / DMR: 3142737 / SOC #1221
Grid: FN20is
Bureaucracy is always in search of self-preservation. — AA7BQ
My totally uneducated guess is that it’s a surface mount capacitor. I did an
image search and found what resembles you have. That’s all I can offer. Good
luck.
72,
Rich Hurd / WC3T / DMR: 3142737 / SOC #1221
Grid: FN20is
Bureaucracy is always in search of self-preservation. — AA7BQ
then you have a different issue.
You may want to try that test. For me it require a trip to the factory
for repair.
Rich
On 11/15/2022 8:27 AM, Martin Schmiedel wrote:
Elecrafters,
i have 2 K3's, #8862 and #2878.
Listeners using Panorama adapter gear like P3 or sdr radios report
unw
portable
setup with my KX3 and PX3. I think I “reeled in” another ham to the hobby that
day. :)
72,
Rich Hurd / WC3T / DMR: 3142737
Grid: FN20is
Bureaucracy is always in search of self-preservation. — AA7BQ
> On Sep 29, 2022, at 19:17, David Thompson via Elecraft
> wrote:
>
&
Interesting idea.
72,
Rich Hurd / WC3T / DMR: 3142737
Grid: FN20is
Bureaucracy is always in search of self-preservation. — AA7BQ
> On Sep 29, 2022, at 04:14, David Gilbert wrote:
>
>
> Has anyone ever tried to used two AX1's back to back as a vertical (not
> horizon
Www.thewireman.com.Slickwire.
72,
Rich Hurd / WC3T / DMR: 3142737
Grid: FN20is
Bureaucracy is always in search of self-preservation. — AA7BQ
> On Sep 26, 2022, at 16:56, Bill Lederer wrote:
>
> Folks:
>
> I think there was a little note in the KX2 bundle about t
I took them out just as a prophylactic measure. I *think* I know that Ni-Cd
cells don’t burst/leak over time but I would rather not perform that experiment
with a KX3.
My Bioenno battery is a small price (in $ and peace of mind) to ensure that I
don’t destroy my radio. :)
72,
Rich Hurd
I have the latest revision stock heat sink and nary a thermal issue. Ever.
72,
Rich Hurd / WC3T / DMR: 3142737
Grid: FN20is
Bureaucracy is always in search of self-preservation. — AA7BQ
> On Jun 13, 2022, at 22:47, Walter Underwood wrote:
>
> Instructions are here. Doesn’t look
it. It integrates w LoTW,
EQSL and Club Log. Plus the owner Don Agro is a great guy, he will reply to
queries often in a few minutes after you send an email. It’s worth a look.
Rich KQ9L
Rich
Sent from Yahoo Mail for iPhone
On Sunday, June 12, 2022, 12:10 PM, Rick Tavan wrote:
I'll s
I commend to you “The Devil’s DP Dictionary” by Stan Kelly-Bootle.
“One line patch” - a code modification so trivial that it only requires a
change to one line of code to correct its function. Further corrected by
another one line patch.
72,
Rich Hurd / WC3T / DMR: 3142737
Grid: FN20is
A nice quality QSO is always a great memory.
72,
Rich Hurd / WC3T / DMR: 3142737
Grid: FN20is
Bureaucracy is always in search of self-preservation. — AA7BQ
> On May 15, 2022, at 15:37, Geoffrey Feldman wrote:
>
> I made a confirmed contact 1:52Z April 15 with LZ2A0 in nor
I saved the tale you related in case I ever need to do this. Thank you.
72,
Rich Hurd / WC3T / DMR: 3142737
Grid: FN20is
Bureaucracy is always in search of self-preservation. — AA7BQ
> On May 7, 2022, at 23:24, David Deelstra wrote:
>
> After a rabbit hole trip through PayPal&
I/Q output and software on your
computer. It’s a great rig, you’ll love it.
Rich KQ9L
Sent from Yahoo Mail for iPhone
On Tuesday, May 3, 2022, 10:25 AM, Walter Underwood
wrote:
I have the battery charger and the ATU. I use internal NiMH batteries for SOTA
activations, it is less stuff to
some bad firmware that needs corrected at Elecraft.
It cannot be done by the end user.
Mine was returned to have that update done, but the ERR DVR still occurs
randomly
Rich
K3RWN
On 4/30/2022 4:04 AM, David Pratt wrote:
Josep - If you do not have the DVR installed in your K3, go to the
FWIW the UPS “insurance” should be taken with a grain of salt. I had my K3
repaired by Elecraft and it was damaged during shipping back. I tried to file a
claim but since I “signed” for it and the box was not “damaged” in transit,
they would not honor the claim! Then again it may never have been
Thanks I will look at the slides. Please note there is NO sound from the K3 as
the S meter jumps around. The hum you hear is the fan on an Ethernet switch
under my desk, it sounds much louder than it really is.
Rich
Sent from Yahoo Mail for iPhone
On Sunday, April 10, 2022, 3:33 PM, Jim
Hi Marv, dealing w same issue with my K3. I posted a video on Vimeo under my
call KQ9L. The S meter jumps all over th place even without an antenna attached.
K3 and FTDX10 simultaneous
|
|
|
| ||
|
|
|
||
K3 and FTDX10 simultaneous
By Richard Lim
Here is a vide
It wasn’t filthy dirty. It was her characterization of the condition. It is a
little faded. I should buy a new one anyway. :)
72,
Rich Hurd / WC3T / DMR: 3142737
Grid: FN20is
> On Mar 28, 2022, at 11:29, Kevin Cozens wrote:
>
> On 2022-03-27 21:07, Rich WC3T wrote:
>
suffering glance and relinquished it. It’s now safely in my part of the
closet.I thought I was going insane because I couldn’t find it.
72,
Rich Hurd / WC3T / DMR: 3142737
Grid: FN20is
__
Elecraft mailing list
Home: http
You can reload the FW
You need the:
KRC2 Download Utility (which should be available on the Elecraft Website
Rich
On 2/6/2022 8:34 AM, Gordon LaPoint wrote:
My KRC2 has a flashing LED at power on, the book says this means it
needs a firmware load. Can this be done by me or does it need a
Goto:
CONFIG - VFO IND - set it to YES
You can then listen to different bands on each VFO
You may find more in the manual regarding VFO IND. Mine is not handy
so I am not sure
Rich
On 1/11/2022 22:39 PM, David F. Reed wrote:
On a K3 with dual receivers, can I listen on 2 different bands
Excellent! Solve the latency issue and we all hit the jackpot!
Curious Wayne, do you have a stand alone hardware solution on the opposite end
of the remoted K4 station planned? It would be great to have something like the
old K3/0 but for the K4 complete w/ Paddle plug in and headphone outputs
I’ve been married for 38 years.
I’ve been a ham since 2015.
Gotta pick my battles.
72,
Rich Hurd / WC3T / DMR: 3142737
> On Dec 19, 2021, at 21:27, Wayne Burdick wrote:
>
> Can you say..."prenuptial"?
>
>> On Dec 19, 2021, at 6:04 PM, Rich WC3T wrote:
Good judgement comes from experience.
Experience comes from bad judgement.
72,
Rich Hurd / WC3T / DMR: 3142737
Northampton County RACES, EPA-ARRL Public Information Officer for Scouting
Latitude: 40.761621 Longitude: -75.288988 (40°45.68' N 75°17.33' W) Grid:
FN20is
> On Dec
Haha! Frankly I would have pulled out the tower plans and discussed them with
your significant other….then the OCF wire wouldn’t seem so bad….rookie mistake
🤣🤣RichKQ9L
Sent from Yahoo Mail for iPhone
On Sunday, December 19, 2021, 8:04 PM, Rich WC3T wrote:
When we moved to this QTH about
mouth were “What is THAT POS?”
Obviously she didn’t have the same mental
Image as I did. I quietly filed the tower plans and am now QRP mobile.
72,
Rich Hurd / WC3T / DMR: 3142737
Northampton County RACES, EPA-ARRL Public Information Officer for Scouting
Grid: FN20is
> On Dec 19, 2
I third the selection of “The Wireman” products. Excellent quality. I use the
26-ga myself.
72,
Rich Hurd / WC3T / DMR: 3142737
Northampton County RACES, EPA-ARRL PIO
Grid: FN20is
> On Dec 19, 2021, at 20:03, Ronnie Hull wrote:
>
> What Wayne said! That Silky 26 g is the way to
Supportive parents are great but tolerant XYLs are better. Back in the heyday
running a linear on 40m, I would flash lights, open the garage, screw up the
stereo and Tv in the house. Wife would smile and say to back off a bit! Now
that’s awesome🥰 Now if I can’t get it done QRP, 100w is the max f
Yep Wayne! I made some 10m contacts to EU w my KX3 barebones! Reminds me when I
first got into Ham radio 20+yrs ago and 5w SSB worldwide was not uncommon! Come
on Cycle 25!!
Rich
DE KQ9L
Sent from Yahoo Mail for iPhone
On Sunday, December 19, 2021, 2:50 PM, Wayne Burdick wrote:
I suggest
Madelyn, can you check on the Status ofMy K3 upgrades? Thank you.RichKQ9L
Sent from Yahoo Mail for iPhone
On Tuesday, July 27, 2021, 11:35 AM, Madelyn Gomez wrote:
Good morning.
This is a notification that the K3/K3S options and upgrades page will be
CLOSED as of 5:00 pm PDT today, July 27th
Mine is faded too. I have to dig it up and see it’s country of origin. I will
report back.
-—-
72,
Rich Hurd / WC3T / DMR: 3142737
Latitude: 40.761621 Longitude: -75.288988 Grid: FN20is
> On Dec 9, 2021, at 19:57, hawley, charles j jr wrote:
>
> I have gotten three of t
I knew this article would come in handy.
http://ag6qr.net/index.php/how-to-use-a-straight-key-and-paddles-together-on-a-kx3/
> On Oct 25, 2021, at 18:13, Paul Huff wrote:
>
> I have been exploring options for connecting a paddle, bug, or straight key,
> to the front edge connector on my new
Wow! Doesn't seem to make sense... so they believe that by shutting down your
home internet that you will stop operating your station which allegedly is
causing the interference?
Or do they believe that by the sheer fact that Xfinity is connected to your
home that your station is causing harmf
They don’t make a 123 Ah battery. Could he have meant the BLF-1203? That’s
what I knock around with.
> On Oct 12, 2021, at 16:55, David Moorman wrote:
>
> A 123 AH BioEnno Battery would cost nearly as much as a KX3!
>
> Dave K9SW
>
>> On 10/10/21 7:27 PM, Geoffrey Feldman wrote:
>> Under
al Message-
> From: elecraft-boun...@mailman.qth.net
> [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Rich WC3T
> Sent: Friday, October 08, 2021 8:37 PM
> To: j...@audiosystemsgroup.com
> Cc: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] Power supply for KX3
>
&
I have used a Samlec 1223 with no RF noise apparent. And as for the Astrons
that we all regret losing, those are linear analog and don’t do the noise
thing. :)
> On Oct 8, 2021, at 20:49, Jim Brown wrote:
>
> On 10/8/2021 4:14 PM, qr...@roadrunner.com wrote:
>> The ubiquitous Radio Shack 22
There’s a reason arborists call it “slick line.”
> On Oct 5, 2021, at 19:05, Walter Underwood wrote:
>
> I looped the wire and taped it with electrical tape.
>
> For winding, I use the SOTAbeams midi winders. They are the same length as my
> KX3. I tried camping clothesline reels, but they
Following closely I am in exactly same situation. Even tried new alkaline
batteries which supposedly can be used and no power up.RichKQ9L
Sent from Yahoo Mail for iPhone
On Thursday, September 23, 2021, 4:25 PM, ncela...@scicable.com wrote:
I got my new factory built KX-3 last week. I just in
Have you perused the Elecraft web site? At the top in the black band on the
right there is a “hamburger” (3 horizontal lines.) If you click there and
select “Support” you will see well thought out and well laid out procedures for
asking for help from Elecraft and if the worst should happen, p
it. If I check the FW REVS in CONFIG it will show "dr 00.01" or
a variety of other numbers, but not "dr 02.05". If I cycle the power
on the radio a time or two it will again show "dr 02.05" and starts
working again.
You might want to check what you FW version is w
I always wondered if I was going to open the case and see exploded NiMH
batteries all over the inside. I finally just took them out, and I'm
sticking with a Bioenno to power it 100% of the time.
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Gwen Patton
Sent: Thu
Condolences to the family.
> On Jun 30, 2021, at 22:09, Bob Wilson, N6TV wrote:
>
> Retired case-maker Rose, N7HKW, and her OM Ken, K0PP, seemed like part of
> the Elecraft family for so many years.
>
> https://buttefuneralhome.com/obituaries/kenneth-glenn-kopp-age-83-of-anaconda-montana/?fb
K9YC.
Rich
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this
mon, but you have a
friend whose call is AC6xxx, much more rare, you can with permission
use that call during the contest. That being said you can only operate
within the limits of your license unless they are present and acting as
a control operator and monitoring your operating.
Rich
Ch
https://www.qrz.com/lookup/n2wl
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of w2xj
Sent: Tuesday, June 29, 2021 12:48
To: j...@audiosystemsgroup.com; elecraft@mailman.qth.net
Subject: Re: [Elecraft] HOA Crap
Can you provide a link to it?
> On June 29, 2021 1
Thanks for the clarification!
> On Jun 27, 2021, at 17:54, Don Wilhelm wrote:
>
> Rich,
>
> In the case of the K2, it makes no difference if you 'pull the plug' or use
> the power switch.
> That same thing does not apply to the K3, KX3 or KX2 - you must power
Dumb question, and I’m no K2 expert — but did you use the power switch to power
down, or just remove power from the input line?I heard that doing it by
jerking the rug out from under the supply is a Bad Thing.
> On Jun 27, 2021, at 17:32, Don Wilhelm wrote:
>
> Ted,
>
> Try 'counting t
.
The "locking" pin is gone along with the red plastic cover. I have
replacement sets. Can I simply pull off the black one, connect the red and
black together, insert the locking pin in the notch, and shove it on. ? ?
Any guidance to fix this would be helpfully.
Rich Lentz,
KE0K
--
cured with some
MIX 31 snap on ferrittes
Rich
On 6/16/2021 23:23 PM, Drew Arnett wrote:
Hi,
In the KX3 for Field Day department, we plan to use it for the GOTA
station for phone on HF. (Yes, will have antennas not on top of each
other and bandpass filters on ALL radios.) Would be great to se
Thanks.
-Original Message-
From: Don Wilhelm
Sent: Friday, April 16, 2021 14:13
To: r...@wc3t.us; 'Elecraft Reflector'
Subject: Re: [Elecraft] Do not use K4 "Restore Defaults" button
Rich,
That restore function is available in KX3 Utility - Restore Configurat
As you get a round tuit, will these nuances make it into the other models in
the KX-line? I always hear of the strident warnings of factory restores
hammering the hard-won calibration data and have counted my lucky stars that
I have not had to head down that road with my KX3.
-Original Messa
. Even if the answer is we are too
busy to help you.
I have given up and find it a waste of time to contact them again.
I will just move on to something else.
Rich
K3RWN
On 3/25/2021 20:44 PM, Randy Lake wrote:
You are not alone John. I can only imagine the position they must be in
with
I've often heard ATUs referred to as "beer goggles for your transceiver."
Ever since I read the first chapter in Reflections III by Walt Maxwell W2DU
(SK) I can well believe it. ("Too Low an SWR Can Kill You.")
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Jim
https://www.dseven.org/ar/n1mm-kdvr3
See if the info at the above link helps.
On 3/6/2021 14:27 PM, Peter Chamalian wrote:
I'm looking for some code that I can write into an N1MM macro that will
trigger playing one of the 4 memories in a K3S. I've looked in the
programmer reference manual but
I used the on-line support form and have not heard a thing for weeks.
I would think they would remove the on-line support if it is not longer
available.
Rich
K3RWN
On 2/26/2021 15:51 PM, Joe Subich, W4TV wrote:
Try k3supp...@elecraft.com
73,
... Joe, W4TV
On 2021-02-26 3:35 PM, Jay
Sync your TIME on the PC. Of course this assumes that your PC is
connected to the internet.
Rich
On 2/24/2021 11:22 AM, Eugene Oliva wrote:
I have not operated FT8 in a long time. Using WSJT-X. I have all
parameters set up and COM responds OK. Also can get 4+ bars on ALC
meter but it
remember after a
Win10 update
Rich
On 2/20/2021 10:30 AM, h...@kpnplanet.nl wrote:
It was a Windows 10 problem after all.
I did a complete new WIN10 install on a 3rd PC, just to be sure I was not
taken things for granted.
Presto. All was working OK now.
Two instances of MSHV are both
On 2021-02-06 08:38:-0500, ws6x@gmail.com wrote:
>Anyway, thanks for bearing with me while I outed this scammer.
Thanks for posting this thread. I really had my eyes opened on a subject I am
naive about...
~R~
72/73 de Rich NE1EE
The Dusty Key
On the banks of the Piscata
Yes.
On 2/1/2021 13:49 PM, Wes wrote:
Does it happen on more than one band?
Wes N7WS
On 2/1/2021 11:17 AM, Rich wrote:
I am experiencing the Power Creep issue on my K3S. This radio was
just returned from Elecraft repair in June of 2020. At that time I
had the issue with distorted audio
information on the cause of this issue?
It is very frustrating to have a radio that cannot drive my amp or put
out proper power without all of these steps to manipulate the power.
Rich
K3RWN
__
Elecraft mailing list
Home: http
oken end) that there may be corrosion on the jack that causes
sticking. I didn't note a loss of sound quality, but after all it's just
limited bandwidth audio.
~R~
72/73 de Rich NE1EE
The Dusty Key
On the banks of the Piscataqua
_
A delightfully sophisticated bit of thought-provoking entertainment. Thanks for
that ;-)
~R~
72/73 de Rich NE1EE
The Dusty Key
On the banks of the Piscataqua
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
en 5W cook unshielded electronics from a meter away. This is just
another example of why I don't TX with the antenna near my head. The E-field
does fall off quickly, but that is not zero, and as you see from the shock, at
the antenna it is fairly strong, even at 10W.
~R~
72/73 de Rich NE1EE
The Dus
40%. Otherwise, I don't recommend using such a space for the
reasons others have mentioned.
~R~
72/73 de Rich NE1EE
The Dusty Key
On the banks of the Piscataqua
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/
with speeds in hardware, but imagine that the IEEE 754 in hardware must be
pretty fast.
~R~
72/73 de Rich NE1EE
The Dusty Key
On the banks of the Piscataqua
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
I have been using these for years and they are fine. $7.56 back when I
got them.
https://cablesondemand.com/15-pin-hd15-deluxe-hd-d-sub-cable-copper-shielded-male-female-cs-dsdhd15mf0
Rich
K3RWN
On 1/24/2021 18:54 PM, Jim Rhodes wrote:
Moving things in the shack so I am looking for a source
~R~
72/73 de Rich NE1EE
The Dusty Key
On the banks of the Piscataqua
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This
https://ieeexplore.ieee.org/document/5162049?arnumber=5162049
~R~
72/73 de Rich NE1EE
The Dusty Key
On the banks of the Piscataqua
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qt
igh."
Scoffing lightly at the deer-in-the-headlights looks...he turns to the VNA, and
punches a few buttons, saying
"If I know what I am doing, we should be good!"
And, voila, they are back at full signal. I need one of those VNAs. ;-) For my
high return losses.
~R~
72/73 de R
installation//
as part of a "help page". I sent them a note, but didn't follow up.
Ah! Had not used nabble in the past, and I now see that this is in response to
Bob McGraw - K4TAX, but the context is not clear.
~R~
72/73 de Rich NE1EE
72/73 de Rich NE1EE
The Dusty Key
On the banks of the Piscataqua
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
;apolitical reflectors. It seems there is no longer anywhere we can get away
>from someone or some group airing their grievances wherever they are at the
>slightest provocation.
>
>Grant NQ5T
;-) A bit of dry (wry?) humor is always appreciated.
~R~
72/73 de Rich NE1EE
The Dusty
On 2021-01-16 18:04:+0100, Eugen DL4SAS via Elecraft wrote:
>Hello,
>Here is what I have learned.
>
>Finally, option C worked for me.
Thanks for reposting all the ideas in one place. Much easier to find in the
future, and easier to keep mental track of.
~R~
72/73 de Rich NE1EE
The
be worth the
effort, if the jack is reasonably accessible...just replace it? Or is it
board-mounted? Even so, prob easier to get at than my 830. OTOH, the 830 jack
is "open", so I could get at the internals. Some newer jacks are encased. In
that case (sic), I think that a replacement
>
>> Note the time is listed as "Register for our K4 Webinar on January 22 and
>> 5:00 PST"
>> but I suspect PDT.
>>
>> ~R~
>> 72/73 de Rich NE1EE
__
Elecraft mailing list
Home: http:/
Updates", and you will see a brief description of the
>seminar and a blue button where you can register.
Note the time is listed as "Register for our K4 Webinar on January 22 and 5:00
PST"
but I suspect PDT.
~R~
72/73 de Rich NE1EE
The
On 2021-01-12 16:28:+, Pete.Milsom via Elecraft wrote:
>I have just acquired a s/h KX3 fitted with an external Windcamp battery
>pack.
Maybe send a picture or 2 to the list?
~R~
72/73 de Rich NE1EE
The Dusty Key
On the banks of the Pisc
On 2020-12-12 11:16:-0500, Kevin Cozens wrote:
>On 2020-12-12 8:06 a.m., Rich NE1EE wrote:
>>Another round of spin the wheel at Rigol turned up this trio
>>UltraScope(PC)Installer_00.01.01.07.zip
>>UltraStation setup.zip
>>Ultra Sigma_00_01_06_01.zip
>>No notes abo
lays "Upgrade finished!", restart the
instrument. DO NOT press OK on the scope!!! Power off. Remove USB drive. Power
on.
Del the upgrade file on USB drive.
~R~
72/73 de Rich NE1EE
The Dusty Key
On the banks of the Piscataqua
__
Ultrascope, but still not connect. Tried the web,
but no joy...any advice?
~R~
72/73 de Rich NE1EE
The Dusty Key
On the banks of the Piscataqua
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
r), using
the laptop date and time, so they are not too far off.
~R~
72/73 de Rich NE1EE
The Dusty Key
On the banks of the Piscataqua
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailma
On 2020-12-08 03:19:+, Andy Durbin wrote:
>"Kenwood does not have such an issue with any of their rigs"
>
>Shortening of the first element was evident in the keying tests I ran on my
>TS-590S. It's not an issue at 25 wpm but at 90+ wpm the first dit may be
>completely lost. The shortening
to support
one more piece of hardware, because my timing needs are not that great now.
Thanks for the suggestion...I had not heard of Meinberg previously.
~R~
72/73 de Rich NE1EE
The Dusty Key
On the banks of the Piscataqua
On 2020-12-01 16:46:-0800, Rick Bates, NK7I wrote:
>Rich,
>You WANT t
On 2020-12-01 12:13:-0800, Jim Brown wrote:
>On 12/1/2020 6:01 AM, Rich NE1EE wrote:
>>What is the sync time tolerance?
>
>1 sec is OK, 2 sec will lose a lot of QSOs. I've used this free app for ten
>years. Painless to install, runs in the background.
> http://www.ti
ainly exceeds that spec.
I'm not an FT8 kinda guy, but I ran across this
http://www.kk5jy.net/tweaktime/
~R~
72/73 de Rich NE1EE
The Dusty Key
On the banks of the Piscataqua
__
Elecraft mailing list
Home: http://mailman.qth.ne
1 - 100 of 907 matches
Mail list logo