Re: [Elecraft] Macbook Pro, K3, FT 8 audio quits

Sorry, I should have added that I am using a MacBook Air, macOS High Sierra, 10.13.4. > On Apr 3, 2018, at 2:27 PM, John Stengrevics <jstengrev...@comcast.net> wrote: > > > I can’t add anything specific to resolve your issue. All I can say is that I > have been using WSJ

Re: [Elecraft] Macbook Pro, K3, FT 8 audio quits

I can’t add anything specific to resolve your issue. All I can say is that I have been using WSJT-X (currently v1.9.0 - rc2 r8533) with my K3S with absolutely no problems. I simply connect the the 2 with a USB cable and follow the instructions to set it up. Perhaps the problem is related to

Re: [Elecraft] K3 And WSJT-X FT8 Timing

Have you tried getting K3S tech support on the phone? > On Feb 23, 2018, at 10:17 AM, Richard wrote: > > Tried all that. No joy. > > Richard > >> On Feb 23, 2018, at 9:16 AM, Bob McGraw K4TAX wrote: >> >> No issues of that type here. These are my

Re: [Elecraft] Fwd: K3 And WSJT-X FT8 Timing

Interval on the F2 Setup menu, Radio tab is set to a > value of 1 second. > > Via the CONFIG menu, PTT - KEY is set to OFF - OFF, the RS-232 set to USB. > > 73 > > Bob, K4TAX > > > On 2/23/2018 8:25 AM, John Stengrevics wrote: >> Try this. >> >

Re: [Elecraft] Fwd: K3 And WSJT-X FT8 Timing

Try this. > On Feb 23, 2018, at 9:16 AM, Bob McGraw K4TAX wrote: > > No issues of that type here. These are my setup numbers: > > Baud Rate = Eight > 38400 > Stop Bits = one two > > Handshake = None > > PTT method = CAT RTS > > Mode = Data/Pkt > > Split = Rig

Re: [Elecraft] Mac Clock Question

Richard, I run a Mac here. Go to System Preferences, Unlock, enter “us.pool.ntp.org ”, Lock and you will be good to go. You should Unlock, delete, and renter the above daily to make sure you are synched - takes 30 seconds. John WA1EAZ > On Feb 20, 2018, at 11:49

Re: [Elecraft] Upgrading a K3?

I agree. I was a total neophyte when I assembled my K3S. I used a cheap mat and wrist band. Never had a static failure. As Walter said, cheap insurance. John WA1EAZ > On Dec 22, 2017, at 2:22 PM, Walter Underwood wrote: > > When working on tube gear, keep one hand

Re: [Elecraft] Local Beacon Splatter

to find out. > > I'd offer to assist. > > After all, it's not a complaint, it's an opportunity to fix a problem. > > 73 -- Lynn > > On 12/16/2017 7:07 AM, John Stengrevics wrote: >> The owner does list his Email address. So, I would have to write a letter &g

Re: [Elecraft] Local Beacon Splatter

Hi Scott, The NB actually helps reduce the splatter. 73, John WA1EAZ > On Dec 16, 2017, at 1:00 PM, K9MA <k...@sdellington.us> wrote: > > On 12/16/2017 08:46, stengrevics wrote: >> I've tried adjusting the noise blanker and that >> helps somewhat. > > Tu

Re: [Elecraft] Local Beacon Splatter

to design and build a rugged small yagi for that beacon as all > the previous commercial ones they used fell apart in the winter. I am sure > those guys would help you with the key clicks. K1SG has his email listed on > QRZ.com <http://qrz.com/>. > > 73 > > Dave

Re: [Elecraft] Local Beacon Splatter

Thanks Jon. May well be antenna related. John WA1EAZ > On Dec 16, 2017, at 11:38 AM, JJ wrote: > > John, > I'm not as close to the beacon as you but I hear it 24/7 and haven't > noticed anything different from it. Same chirp it's always had and nothing > else. > Good

Re: [Elecraft] Local Beacon Splatter

; Bob, K4TAX > > > On 12/16/2017 8:46 AM, stengrevics wrote: >> I have a beacon a couple of miles from me that has recently begun to splatter >> all over the 6 meter band. I've tried adjusting the noise blanker and that >> helps somewhat. I also tried adjusting th

[Elecraft] Local Beacon Splatter

I have a beacon a couple of miles from me that has recently begun to splatter all over the 6 meter band. I've tried adjusting the noise blanker and that helps somewhat. I also tried adjusting the filter width, and shifting the filter setting, with little result. Anyone have any experience

Re: [Elecraft] K3: 2 meter SSB/CW Capability Questions

Phil, I have had no problems working MSK144 on 2 meters as well as EME using the K144XV internal option with my K3S. John WA1EAZ > On Dec 14, 2017, at 8:04 AM, Steve Kavanagh via Elecraft > wrote: > > Phil > > One possible way to make a decision is to consider

Re: [Elecraft] 48 volt PS

Feel free Ted, John WA1EAZ > On Dec 7, 2017, at 1:13 PM, John Stengrevics <jstengrev...@comcast.net> wrote: > > I use a Meanwell power supply for my amp. It causes very little RFI on my > K3S which is readily suppressed with ferrites. > > John > WA1EAZ >

Re: [Elecraft] 48 volt PS

I use a Meanwell power supply for my amp. It causes very little RFI on my K3S which is readily suppressed with ferrites. John WA1EAZ > On Dec 7, 2017, at 12:57 PM, Dauer, Edward wrote: > > I need to buy a 48 VDC power supply for a project that requires that voltage > –

Re: [Elecraft] K3S New Builder (Tom NB5Q)

HI Tom, I, like you, chose to get back into ham radio after many years by building the K3S. Don suggestions are right on the money. Follow the instructions to the letter. I made 3 small errors, all found with the help of Elecraft tech support, and I think with Don’s help as well. I

Re: [Elecraft] Antenna Analyzer

The RigExpert line is small. 73, John WA1EAZ > On Dec 1, 2017, at 7:49 AM, wrote: > > just a quick question for the collective group here. I have built up my KX-2 > travel kit. The first week of november I took it with me to a cabin I leased > outside

Re: [Elecraft] CW Contest and Elecraft K3s decoder

I too have never been able to get the CW decoder to work well. It only works if signals are super strong - precisely when I don’t need it. Anybody have any suggestions? John WA1EAZ > On Nov 26, 2017, at 9:28 PM, K9MA wrote: > > Perhaps my K3 has a problem, but I've

Re: [Elecraft] K3S Noise reduction Test

Jim, Is there a similar unit that covers 50 MHz? Or, a way to modify the NCC-1/NCC-2? 73. John WA1EAZ > On Jun 21, 2017, at 12:33 PM, Jim Brown wrote: > > Yes, the NCC-1 is a superb unit, especially for use on 160, 80, and 40M. It's > usefulness diminishes

Re: [Elecraft] 6 meters is open

Have a look at DX Maps. > On Jun 5, 2017, at 3:33 PM, kevino z wrote: > > Which was it ? 1000 watts ? Or 8 w? > > - > The problem with the world is that the intelligent people are full of doubts, > while the stupid ones are full of confidence. > > On Jun 5, 2017, at

Re: [Elecraft] K3S Preamp 2 Six Meter Noise Figure

cording to the ARRL review in November, 2dB! Deaf no more. > > AB2TC - Knut > > > stengrevics wrote >> Does anyone know what the preamp 2 noise figure is on 6 meters? I >> have not been able to find it in the owner's manual or in Fred's book. >> >> Tha

[Elecraft] K3S Preamp 2 Six Meter Noise Figure

Does anyone know what the preamp 2 noise figure is on 6 meters? I have not been able to find it in the owner's manual or in Fred's book. Thanks, John WA1EAZ -- View this message in context: http://elecraft.365791.n2.nabble.com/K3S-Preamp-2-Six-Meter-Noise-Figure-tp7630221.html Sent from the

Re: [Elecraft] Problem Setting CW Offset to Zero

on SSB, it is best to enable VFO OFS so the other station doesn't > have to retune you when you switch from SSB to CW. > > 73, > Fred KE7X > > From: Elecraft <elecraft-boun...@mailman.qth.net > <mailto:elecraft-boun...@mailman.qth.net>> on behalf of stengrevics

[Elecraft] Problem Setting CW Offset to Zero

Reading KE7X's manual, I should be able to set the offset to zero by selecting CW WGHT from the CONFIG menu and then tapping the 5 button to select VFO nor. But, this procedure leaves the offset at around 50 KHz. Am I interpreting Fred's instructions incorrectly? Thanks, John WA1EAZ -- View

Re: [Elecraft] Data Received on Mac Transmitted by K3S

k device in Windows to be > your computer's sound card, and only configure WSJT and any other ham > software to use the K3S audio codec. > On Wed, Apr 5, 2017 at 10:50 AM John Stengrevics <jstengrev...@comcast.net > <mailto:jstengrev...@comcast.net>> wrote: > Audio setti

Re: [Elecraft] Data Received on Mac Transmitted by K3S

audio settings, under systems preferences. >> >> >> Bob Nobis >> n7...@nobis.net <mailto:n7...@nobis.net> >> >> >>> On Apr 5, 2017, at 07:51, stengrevics <jstengrev...@comcast.net >>> <mailto:jstengrev...@comcast.net>>

Re: [Elecraft] Data Received on Mac Transmitted by K3S

t; > Bob Nobis > n7...@nobis.net <mailto:n7...@nobis.net> > > >> On Apr 5, 2017, at 07:51, stengrevics <jstengrev...@comcast.net >> <mailto:jstengrev...@comcast.net>> wrote: >> >> New phenomenon. When I go to a website that can play a video (s

[Elecraft] Data Received on Mac Transmitted by K3S

New phenomenon. When I go to a website that can play a video (such as YouTube), and the video is played, something is transmitted by my K3S. Note: This is a new phenomenon. I have not knowingly changed any setting. I would appreciate any suggestions. 73, John WA1EAZ -- View this message

[Elecraft] K3S Receive Settings on WSJT-X

I am operating MSK144 on 6 meters. I have a fairly high noise level which requires use of AGC, NR and NB to get the noise level down on other modes. But, if I understand correctly, I shouldn't use those features on WSJT-X. That leaves me with that noise level. I would be glad to know what

Re: [Elecraft] Frequency Counter for Calibrating K3S

> Actually it is likely more accurate than you would get with a <$100 frequency > counter, unless you calibrate the frequency counter beforehand. I suspect > any frequency counter costing less than $100 is either inaccurate or limited > to audio frequencies. > > 73, > D

[Elecraft] Frequency Counter for Calibrating K3S

I am considering buying a frequency counter to calibrate my K3S. I see that Amazon has several for <$100. Has anyone had any experience with these? Are they just a waste of money? Thanks, John WA1EAZ -- View this message in context:

Re: [Elecraft] No Output from K3S on WSJT MSK144

gt; I fixed loose connections in my power supply and put a short lead from the > supply direct to the K3 and things are going well again. > > Problem fixed at zero cost. > From: Elecraft [mailto:elecraft-boun...@mailman.qth.net > <mailto:elecraft-boun...@mailman.qth.net>

Re: [Elecraft] No Output from K3S on WSJT MSK144

ls for the CODEC in your > computer. > > 73, > Don W3FPR > > On 2/9/2017 10:10 AM, stengrevics wrote: >> Was working fine, but today I have no output from the K3S on WSJT MSK144. If >> I select "Tune" on the WSJT screen and try to adjust the Mic gain

[Elecraft] No Output from K3S on WSJT MSK144

Was working fine, but today I have no output from the K3S on WSJT MSK144. If I select "Tune" on the WSJT screen and try to adjust the Mic gain control, I can't get any reading on the ALC meter. Any suggestions would be appreciated. John WA1EAZ -- View this message in context:

Re: [Elecraft] WSJT-X Problem with K3S

.nr4c. bill > > >> On Jan 17, 2017, at 11:48 AM, John Stengrevics <jstengrev...@comcast.net> >> wrote: >> >> Many thanks to all who provided their suggestions. >> >> I decided to try Joe's (W4TV) suggestion and elect RTS. That appears to >

Re: [Elecraft] WSJT-X Problem with K3S

drive relays to detune > towers and de-resonate wires when RX. > > Given that the K3S board has both a USB/serial chip and a sound card on it, > no workable scheme proven robust for the K3 has to be discarded for the K3S. > > All that aside, glad you you managed to cag

Re: [Elecraft] WSJT-X MSK144 & Transmit Delay

-server-monitor.htm#download> > > The Meinberg apps are GUI's that make native calls to the full NTP install > under the covers and they are totally free and free of any nag related > nonsense. > > If you are running Linux or iOS, you are already running a native NTP client

Re: [Elecraft] WSJT-X Problem with K3S

Three turns of the USB cable through a #43 ferrite and I am good to go at full power (95 watts). John WA1EAZ > On Jan 12, 2017, at 2:40 PM, Edward R Cole wrote: > > Now that the thread has morphed to RFI: > > I was getting complaints from my wife that my transmissions

Re: [Elecraft] WSJT-X Problem with K3S

y iPhone > ...nr4c. bill > > >> On Jan 12, 2017, at 10:03 AM, stengrevics <jstengrev...@comcast.net> wrote: >> >> When I transmit (using MSK144), the transmit stays on after the transmission >> is complete causing spillover into the next sequence. This happens &g

Re: [Elecraft] WSJT-X Problem with K3S

gt; > On 12 January 2017 at 10:08, Joe Subich, W4TV <li...@subich.com > <mailto:li...@subich.com>> wrote: > >> >> On 1/12/2017 11:05 AM, John Stengrevics wrote: >>> What’s the solution, ferrites on the USB cable? >> >> Stop using CAT Command

Re: [Elecraft] WSJT-X Problem with K3S

t; ugly head later on. > If you fix the problem at its source, you will fix a lot of "strange > behaviors". > > 73, > Don W3FPR > > On 1/12/2017 11:05 AM, John Stengrevics wrote: >> Hi Nick, >> >> Thanks for the suggestion! I turned the pow

Re: [Elecraft] WSJT-X Problem with K3S

the past, it's been because of > RF leaking back into the shack and causing CAT commands to fail (because of > common mode current on the serial line). > > If you reduce power to something quite small, like 1-2 W, does it stop > happening? > >Nick > > On 12 Jan

[Elecraft] WSJT-X Problem with K3S

When I transmit (using MSK144), the transmit stays on after the transmission is complete causing spillover into the next sequence. This happens randomly. Anybody have any suggestions as to how to fix this? Thanks, John WA1EAZ -- View this message in context:

Re: [Elecraft] K3S Set-up for WSJT-X

This AM, I was able to type "|s /dev “ in the Terminal window and I got a list containing the port ID. That same ID was visible on the WSJT-X window, so I could select it and proceed. John WA1EAZ > On Jan 6, 2017, at 9:36 AM, Marc Veeneman wrote: > > Don, on a Mac, the

Re: [Elecraft] K3S Set-up for WSJT-X

h a more knowledgeable support person. > > 73, > Don W3FPR > > On 1/5/2017 9:30 PM, John Stengrevics wrote: >> Hi Don, >> >> The equivalent - System Information - doesn’t give the Com Number. In fact, >> Apple tech support said I need to get it from

Re: [Elecraft] K3S Set-up for WSJT-X

ting-up-serial-terminal-on-system-with-mac-os-x> > > > -Kevin (KK4YEL) > > > > No trees were killed in the sending of this message. However, a large number > of electrons were terribly inconvenienced ! > > On Jan 5, 2017, at 21:33, John Stengrevics <jsteng

Re: [Elecraft] K3S Set-up for WSJT-X

k in and observe which COM port is added. > Tell WSJT-X which COM port it should use. > > No additional driver should be required unless the COM port shows an error. > > 73, > Don W3FPR > > On 1/5/2017 7:48 PM, stengrevics wrote: >> Two very basic questions as I am just g

[Elecraft] K3S Set-up for WSJT-X

Two very basic questions as I am just getting started: 1. How do I determine the COM number or Serial Port Number to enter in the Radio Tab? (I am using a Mac) 2. I only want to use the computer to operate WSJT-X, no need to control anything else. Do I need to download a driver of some kind?

Re: [Elecraft] Antenna Question

I run LMR400 to my 6 & 2 meter antennas with no problems. Just leave enough slack around the rotor and you’ll be fine. John WA1EAZ > On Oct 10, 2016, at 6:14 PM, hsherr...@reagan.com wrote: > > OK all. I'm installing a 6m rotating beam and feeding it with LMR400. Would > you connect the LMR

Re: [Elecraft] K3S - Build or Buy

Agree completely. Never having built something before, I get a sense of accomplishment every time I turn my K3S on. Sent from my iPhone > On Sep 6, 2016, at 9:57 AM, Charles R.Tropp via Elecraft > wrote: > > It certainly is not a question of saving $200.00 because

Re: [Elecraft] OT - 6 meter DX activity in sunspot low

I got back into the hobby 2 1/2 months ago. I have been on 6 meters almost exclusively during that time, running my K3S at 95 watts to a 6 element quad at 40 feet. During this time, the band has been open to somewhere practically every day. In this time, I have worked 40 states and 26

Re: [Elecraft] k3s radio kit

I’ll chime in. I had never built anything previously. So, successfully building the K3S gave me a great sense of accomplishment. The assembly manual for the K3S is excellent. Follow it carefully. I made 3 goofs during construction. No big problems, easily diagnosed by tech support. I

Re: [Elecraft] Uninterruptible Power Supply for K3S (power line arc noise)

Thanks to all for your very helpful comments & suggestions. John WA1EAZ > On Jul 11, 2016, at 5:18 PM, Mike K8CN wrote: > > John, > > Power line arc noise can happen anywhere, even in a semi-rural area like > your neighborhood (I used to live in Acton MA). There are many

Re: [Elecraft] Uninterruptible Power Supply for K3S

a couple of miles. So, I’m at a loss. Maybe atmospheric noise? John WA1EAZ > On Jul 11, 2016, at 3:05 PM, Jim Brown <j...@audiosystemsgroup.com> wrote: > > On Mon,7/11/2016 11:36 AM, stengrevics wrote: >> To deal with a power line noise problem, someone suggested I try

[Elecraft] Uninterruptible Power Supply for K3S

To deal with a power line noise problem, someone suggested I try an uninterruptible power supply (UPS). Does anyone have any experience doing this? If so, what UPS specifications are appropriate to handle the K3S? My apologies if this has been previously discussed. Please do provide a link if

Re: [Elecraft] Panadapters for a MM station using 4 K3s

le on the spectrum > display. I want to see the noise sources that may interfere with my > reception just the same as I want to see the signals on the band. > > 73, > Don W3FPR > >> On 7/4/2016 11:31 AM, John Stengrevics wrote: >> Don, >> >> LP-PAN

Re: [Elecraft] Panadapters for a MM station using 4 K3s

Don, LP-PAN advertises noise reduction. Does the P3 do similar? John WA1EAZ Sent from my iPhone > On Jul 4, 2016, at 11:27 AM, Don Wilhelm wrote: > > Bill, > > The least frustration route is to use the P3 with the SVGA option (and > perhaps the TXMON option). > >

Re: [Elecraft] CW Setup

Begali sent a defective cable when they delivered my straight key. So, I went out an bought a two-wire (not stereo) cable & plug from Radio Shack. Seems to work fine. Am I doing any damage? John WA1EAZ > On Jun 26, 2016, at 10:38 PM, EricJ wrote: > > K6DGW's post

Re: [Elecraft] Difference in DSP in K2 and K3S

If anyone has a moment to provide instructions on how best to adjust the NR, I would appreciate it as well. 73, John WA1EAZ > On Jun 7, 2016, at 5:16 PM, Paul Wilton wrote: > > I have been using a K3S in a 2m SSB VHF contest this evening and find that > the DSP NR is

Re: [Elecraft] Problems with K144XV Transverter for K3S - Can't Hear Anything

;mailto:elecraft-boun...@mailman.qth.net>] On Behalf Of John Stengrevics > Sent: Monday, June 6, 2016 6:50 PM > To: Bill Frantz > Cc: elecraft@mailman.qth.net <mailto:elecraft@mailman.qth.net> > Subject: Re: [Elecraft] Problems with K144XV Transverter for K3S - Can't Hear > Anything &

Re: [Elecraft] Problems with K144XV Transverter for K3S - Can't Hear Anything

ed. > > 73 Bill AE6JV > > > On 6/6/16 at 6:04 AM, jstengrev...@comcast.net > <mailto:jstengrev...@comcast.net> (stengrevics) wrote: > >> I have installed the transverter and phase lock option, and have enabled it >> successfully (per the instructions). I have an

[Elecraft] Problems with K144XV Transverter for K3S - Can't Hear Anything

I have installed the transverter and phase lock option, and have enabled it successfully (per the instructions). I have an antenna whose SWR measures less than 1.2 across the band (confirmed with antenna analyzer). However, I can't hear anything on 2 meters. This was confirmed when I asked a

[Elecraft] K3 Not Responding to K3 Utility

I am trying to do the TX Gain Calibration on the K3S. I have a Macbook Air (USB ports only). I downloaded the utility for Mac and the latest drivers. However, there appears to be no connection between the K3 and the computer (I get an error message "K3 not Responding" and all options on the

[Elecraft] VFO B Not Scrolling Through Config Menu

I’ve finished assembly and am now on to the test and calibration stage. When I hold the menu button, I access Config. However, the VFO B control doesn’t scroll through the menu. Any suggestions would be much appreciated. John Stengrevics WA1EAZ

<    1   2