But my "other" rig is a K2 and it is NOT for sale ;-)
Doug,W6JD
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/li
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Benton Webb
> Sent: Saturday, May 05, 2007 4:22 PM
> To: elecraft@mailman.qth.net
> Subject: [Elecraft] FOR SALE: KX1 with KXAT1 ANTENNA TUNER
>
>
> I have FOR SALE a KX1 transceiv
I have FOR SALE a KX1 transceiver 20/40 meter version with built in KXAT1
automatic antenna tuner. This radio worked perfectly until I added the
30/80 meter module and then nothing worked. I removed the 30/80 meter
module and restored the radio to original condition (I think).
It now works perf
FOR SALE: K2 QRP top cover complete with KAT2 20 watt antenna tuner,
speaker, all connectors and wiring as originally built. Tuner works
perfectly. Cover is spotless, scratchless, just like new. $140 shipped to
your doorstep.
Please contact off-list if interested. Thank you.
Paul Webb, K5HK
Sold
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscriber
XG-1 Test Oscillator Kit.packaged never opened.
$32 shipping included.
73
Elliott WA6TLA
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http:
The first of many!!
From: "Bob Blair" <[EMAIL PROTECTED]>
Date: Sat, 28 Apr 2007 10:48:41 -0500
k2 with everything. email me and lets negotiate
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You
k2 with everything. email me and lets negotiate
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailma
For Sale: Elecraft AF1 Active Audio Filter. Built nicely and working
fine.
Specs are at www.elecraft.com under Mini Modules.
$48.00 plus $8.00 shipping Sell only to the lower 48 states. Paypal.
I have two of them.
--Bob W1XT
K2 #1434, K2-100 #5812, KX1, + +
Surprise, Arizona
[EMA
Hi
I am selling one of my K2s
Elecraft K2 QRP version
Serial 4271
Options
160m and second antenna
KIO2 Serial interface
Works fine - £450
Also KAT2 QRP ATU £50
Clearing out the shack
73 Bob G3PJT
___
Elecraft mailing list
Post to: Elecraft@mailman.
For sale K2 # 5619 + KSB2, brand new, built last summer and autumn, because
I like building these kits. Asking EUR 600.00 plus transport to your home.
If you want, it is possible to add all other options you want at cost-price.
Pictures are available. Please respond off list.
Gerard PA1GP
[EMA
I have for sale one Black Widow Paddle by W5JH. I had it assembled and was
not happy with the finish on the brass so I disassembled it and it has been
in a plastic tray for quite a few months. I resanded the base and never
went back to it. So it's basically a kit again that has been sanded a lot
If anyone needs an already built KXB30 30M adapter for
their KX1, I will sell you mine for $12 (includes
postage). My KXB30 works perfectly but is no longer
needed for my KX1.
I have the already-built KXB30, and its 8 page
Assembly and Operating Instructions ... all in mint
condition.
Mike K6V
The meter has been sold.
Roger, W1EM
-
-I have for sale a 120W version of the LP-200 Dummy Load/Digital Wattmeter
by
-Larry Phipps - N8LP. The meter is assembled and works great. Check out
his
-web site for all the in
I have for sale a 120W version of the LP-200 Dummy Load/Digital Wattmeter by
Larry Phipps - N8LP. The meter is assembled and works great. Check out his
web site for all the info and pictures you could want on the LP-200. Larry
makes great products. I think they are as good as Elecraft's and tha
I have a K2 serial number 1661 for sale or trade. It is in good
electrical and physical condition. It has the following options:
KAT2 - Internal 20W tuner
KSB2 - SSB option
K160RX - 160 m
KNB2 - Noise Blanker
KBT2 - Internal battery kit (new battery from Elecraft last week)
KAF2 - Audio Filter/R
And, if you have the parts, I _do_ offer bare PC
boards for the kit for $6 (USD) ppd to your (US)
mailbox... $7 (USD) to DX addresses.
73,
Tom N0SS
At 08:05 AM 1/2/2007, Siu Johnny wrote:
Hi Group,
I have recently upgraded my amplifier keying
with Tom's kit. In the past, Elecraft also s
Hi Group,
I have recently upgraded my amplifier keying with Tom's kit. In the past,
Elecraft also sold an amp keying kit at US$5 plus postage. This earlier
version consists of two 2N7000 with similar working principle of Tom's kit.
This kit is now surplus to me. It is a completed kit and rea
FOR SALE: Brand-new Super Antennas MP-1 with Tripod.
Please see: http://www.superantennas.com/
This is a great portable vertical antenna that can cover 40 to 6
meters. Has sliding adjustable coil similar to the Yaseu ATAS-25.
The unit is rated for 150 watts.
$75 + $7.50 shipping.
The XYL sa
Purchased kit a little over a year ago - decided to build the
KDSP2 instead. Please contact off list
73,
Jack KA1QG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr.
Build this kit last summer just for the fun of building another K2. I am
an electrical engineer and have been building kits for some 50 years. I
would like to sell it just at the price I payed for it, including
postage from the US and taxes (VAT) and including the US$ 50 Dayton
discount: EUR 675 t
I have a new, unbuilt KXB30 option for the KX1.
If interested, make me an offer.
It is surplus to my needs as I have installed KXB3080 option instead.
Javier NM6E
K2 #4409
K1# 1103
KX1# 813
ARCI #11908
___
Elecraft mailing list
Post to: Elecraft@mailm
Hello Elecraft builders,
I have the subject Auto Tuner for sale. In unopened package.
Bought as part of a K2 package. Previous owner never found building time.
$159.00 shipped. Pay-Pal or Postal type Money Order preferred. CONUS only.
Please respond off-reflector...
Thank you...
Ken, W2G
Hi,
Well it looks like Murphy has struck me hard. I received a few inquiries
regarding the HP 8640b, some requesting
pictures. So I figured I'd show the generator into a frequency counter
and scope. I noticed some erratic readings
on the freq. counter, so I hooked up the scope and saw the ampli
Hello all,
I have for sale an HP 8640B Signal Generator with options 001 and 003.
There is a problem with the frequency counter readout, the range switch
needs
a new front wafer for the readout to work properly. I know it needs a
new wafer because
there is a "connecting finger" missing from the
All items sold except the K2 below. Thanks for the responses.
Here's the details:
My father (K6AXS ex: KE0PG, WA0UMR now SK) built this K2 and
options in 2002. He became a SK in early 2003. I had the best
intentions to use it and subsequently bought additional
Elecraft kits and a us
All items sold except the K2 below. Thanks for the responses.
Here's the details:
My father (K6AXS ex: KE0PG, WA0UMR now SK) built a K2 and
options in 2002. He became a SK in 2003. I had the best
intentions to use it and subsequently bought additional
Elecraft kits and a used KAT100
Update - some items sold.
Elecraft K2 and multiple options for sale:
From: Charlie Hicks K0CKH
[EMAIL PROTECTED]
My father (K6AXS ex: KE0PG now SK) built a K2 and
options in 2002. He became a SK in 2003. I had the best
intentions to use it and subsequently bought additio
Elecraft K2 and multiple options for sale:
From: Charlie Hicks K0CKH
[EMAIL PROTECTED]
My father (K6AXS ex: KE0PG now SK) built a K2 and
options in 2002. He became a SK in 2003. I had the best
intentions to use it and subsequently bought additional
Elecraft kits and a used
Dear All:
I just built my second N2PK VNA using VE3IVM's board. So my first one
is now for sale.
Specs: As described in http://users.adelphia.net/~n2pk/
Built and tested by me in Fall 2005.
Built on Greg Ordy's board kit
The Valpey Fisher Oscillator is insta
Hello All,
The subject K2 has been SOLD.
Thank you for the response and comments regarding this K2.
73,
Frank - W6NEK
- Original Message -
From: "W6NEK" <[EMAIL PROTECTED]>
To:
Sent: Monday, July 31, 2006 3:47 PM
Subject: [Elecraft] For Sale New K2
Hello Fellow Ele
Hello Fellow Elecrafters,
I have for sale a newly assembled, tested and aligned K2.
If anyone is interested in a professionally built (plug & play) K2 please
check out this link:
http://www.w6nek.com/K2/5632.html
(caution, above link contains 15 photos, 2.37 megs - pretty slow if you have
a di
I have the following items for sale:
1. Oak Hills Research SFF-1A Switched Capacitor Filter
Like new with manual. Bandwidths 108, 230, 383, 459
574, 2440 Hz. Great CW filter. $40.00 + 5.00 shipping
CONUS.
2. W9GR DSP-3 Like new with manu
I have for sale the following items.
K2/100 (s/n 4028 fully upgraded) with KNB2, KDSP2, KSB2, K160RX
KAT100
K2 Top Cover with KIO2.
EC2 enclosure with KAT100 panels
MFJ 1279 sound card interface
This equipment has been in continuous use since built.
For sale: KX1 serial #1447. It's about three months old. Included options
are:
KXB3080 Four Band Board
KXAT1 Auto Internal Tuner
KXPD1 Paddle
The radio works great and looks like new. I have built three K2s, a K1, two
KX1s, two Elecraft transverters, and just about all the option
Selling my well loved K1 with four two band filter boards, ATU, and a
few accessories.
K1 #292 - 2 Band Model recently aligned for the following filter boards:
40/80
20/15
17/30
It will also come with a fourth filter board for 20/40.
KAT1 is included along with the tilt stand with only the sho
I have for sale KX1 serial #1447. It's about two months old. Included
options are:
KXB3080 Four Band Board
KXAT1 Auto Internal Tuner
KXPD1 Paddle
Six Slightly Used Lithium batteries
The radio works and looks like new. I have built three K2s, a K1, two KX1s,
two Elecraft trans
FOR SALE:
KAT100-1 150W automatic antenna tuner for the K2 and K2/100. New in box,
not built. Bought new from Elecraft in May 2005. $200+shipping.
Please contact me off-list at:
[EMAIL PROTECTED]
73,
Chris WT1L
___
Elecraft mailing list
Post to:
One last try before it goes to Ebay make me a reasonable offer if you
are interested. Thanks!
---
FOR SALE-
COMPLETE Elecraft K2/100 package, which consists of:
Elecraft K2/100 serial no. 4841, built, with these options installed:
- KPA100 100W amp (makes it a K2/100 inste
Dear Elecraft List-
FOR SALE-
COMPLETE Elecraft K2/100 package, which consists of:
Elecraft K2/100 serial no. 4841, built, with these options installed:
- KPA100 100W amp (makes it a K2/100 instead of a regular K2). The KPA100
also includes the computer (serial) interface.
- KDSP2 DSP module
Good Morning!
Do you still have your K2?
Rodger, K6JET
cell 858 204-7911
___
Elecraft mailing list
Post to: Elecraft@ma
I forgot to mention that also included with the K2 are the K2 VCO Magnetic
Field Shield Kit and the KSB2 Wider Bandwidth Capacitor mod. The SSB audio
sounds great. Both are installed and will be included without additional
cost.
Roger Marrotte, W1EM
___
I have for sale, a high serial number K2,serial # 5116. Included options
are:
K160RX 160 Meter/2nd RX Antenna Option
KAF2 Audio Filter and Real Time Clock
KAT2 20 Watt Internal Tuner
KIO2 RS-232 Interface
KNB2 Noise Blanker
KSB2 SSB Option
The radio works and looks like
I have decided not to remote my KPA 100, and therefore have for sale a new
in box EC2 Enclosure and a newly assembled KI02 Aux. I/O. I will sell both for
$140 or $55 for the EC2 and $85 for the KI02 including shipping CONUS. Please
contact me directly via email...thanks, Ci
Ci Jones, WU7R
Excess to my needs, I have an M-Squared OR2800 rotator and control box.
It is just back from M-squared where it was checked out and everything
replaced that was suspect. It is the older AC model. There is no rotor
cable with it. This is a used unit. I have used it to turn my VHF/UHF
antennas
Hi all
I have decided to sell my K2 #3134, after a many good hours of QSO's
It is not because the rig is run down, on the contrary, but I have been
bitten
by that little "bug" that I fear rummage around in many shacks.
And I have got the building itch again, hi. But if I am to build another K2
I ne
I have a 250W amplifier for sale. It is an RM HLA 300. It is rated at 5W in
for 300W out for 10-160 M. It has automatic bandpass filter selection, swr
and over temp protection. This is a great accessory to any QRP station and
works very well with a K2 or FT-817. The specs say it will deliver 300 W
I have a wired and tested KPA-100 module for sale. Just replace the regular top
with this unit and you are ready to operate. It is complete with high current
cable and connector.
$450. including UPS from PA to lower 48 states.
Howard
___
Elecraft mail
For sale: Model K2/100 serial no 2580 with the following options:
KSB2 SSB module with F/W 1.08
K160RX160 meter module
KNB2 Noise blanker
FDIMP Finger dimple
MD2 desk microphone
Power cord
K2 top cover
Following A to B upgrades installed:
Firmware 2.04 K2 IOC 1.09
K2KEYMKDT keying bandwidt
k2 100 BUILT BY A PROFESSIONAL. all the goodies installed expcept antenna
tunner. Not in use but works very well. Serial 40507 Hex Key can go with it
if desired (very good paddle incidentally)
Reasonable offer related to kits costs acceptable
Then next for sale is an ICOM IC756PRO II w/ power
I have for sale a set of unused pre-wound toroids for the KAT-100 antenna
tuner (By Toroid Guy).$25.00 first class mailed.Please email off list to
[EMAIL PROTECTED]
Thanks and 72.
Dick Housden, W0NTA
Greeley, CO
___
Elecraft mailing list
Post to: E
Mint condition K2/100 for sale consisting of the following:
K2 (ser #35xx) w/latest firmware upgrades
KPA100 100 watt amp
KSB2 ssb adapter
KDSP2 dsp unit
KAT2100 external atu
KAT2 atu installed in orginal lid (great for portable use)
RS232 cable for connecting to computer and KAT100
DC cable
Kenw
Loaded with goodies professionally done. KK7UQ interface for PSK.Cables
included.
Give me a reasonable offer and I'll pack and ship to your requirments.
73 Earl W7TK
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscrib
FS: KDSP2 assembled and ready to go. Works fine, I just like the KAF2
better. Asking $199.00 shipped. Please reply off list to
[EMAIL PROTECTED] . Thanks!
73's
Jack W4EFZ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must b
Gentlemen,
I have FOR SALE a brand new, still in original packaging, KAF2 Audio
Filter/Real Time Clock kit. Opened only to inventory parts. $30.00
delivered to your door by USPS Priority Mail. Will accept check or Pay Pal.
Please respond off-list. Thanks.
Paul, K5HKX
PAUL WEBB
[EMAIL PROTEC
I have the following items for sale:
K2 - Xcvr(ser # 35xx) w/latest firmware
KPA100 - 100w amp
KAT100 - ATU
KSB2 - SSB adapter
KDSP2 - DSP module
All manuals, errata sheets etc included
Everything is nicely built and works to specs w/full power out on all
bands, no dings or scratches.
Asking $
Late serial K2 with most accessories for sale at Elecraft prices.
Perfect condition electrically and physically
Telephone for full information 9a to 9p Pacific 360 638 2707
73
Earl W7TK
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You mus
I have for for sale the following.
K2 - Ser# 35xx
KPA100 - Amp
KAT100 - Ant tuner
KSB2 - SSB adapter
KDSP2 - DSP adapter
KAT2 - 20w atu w/ original lid
All cables, manuals and spare hardware etc. included.
Everything is nicely built and in excellent electronic and physical
condition w/full out
Hi All,
I have for sale some Elecraft kits that are excess to my needs at this time.
K1 Upgrade Kit. Upgrades older K1s (s/n 1092 and earlier) to match current
K1s. $7.00 mailed.
KFL1-4 Trimmer Capacitor Upgrade kit. $10.00 mailed.
KAT-100 pre-wound toroids (By Toroid Guy) $27.00 mailed.
Just sold my KX-1 and no longer need my T-1 tuner. It was factory assembled
and never used. 20 bucks off invoice shipped.
Phil
K2/KAT100
Philip LaMarche
LaMarche Enterprises, Inc.
www.instantgourmetspices.com
727-944-3226
800-395-7795 pin 02
FAX 727-937-8834
NASFT #30210
W9DVM
__
I have a brand new, never used, KX-1 that was built by an Elecraft builder,
Doug Shields. Serial # 990.
It includes the AT, 30 meter and paddles. Also includes a Jameco AC Adaptor
[EMAIL PROTECTED] Also includes a small camera tripod with a mounted back cover
from Elecraft to have it on the desk
Since I have the K2/100 I have no need for the old top cover. This is
complete with KIO2 ($89 kit price), KAT2 ($159 kit price), KBT2 ($67 price),
with speaker and of course the cover itself. All ready to plug in and
operate. This is a $300+ value (not counting assembly time) for $225. Save
time a
K2 #1568 v2.01f firmware,
KAF2 Audio Filter / Real Time Clock
KSB2 SSB Adapter, wired for Yaesu mic. using wire wrap
KIO2 RS-232 Adapter w/cable
KNB2 Noise Blanker
100 w amplifier in top.
Manual for both K2 and Elecraft 100 amplifier.
Microphone not includ
k2 top cover with kat2 qrp atu installed and kio2 rs-232 interface is for
sale for $195.00 shipped conus ups brown. paypal, M.O. Check. Contact
direct.
Reggie Southwest Bakersfield, CA.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You
For Sale: Elecraft MD-2 Microphone + Elecraft PL2T Studio Arm For MD2 +
Heil RS-1 12" Riser. Selling all three pieces as a set only. New price is
about $143.00. Will sell set for $100.00 + $15 for shipping. The
microphone and the arm are described on the Elecraft web site. The RS-1 12"
riser
I may not have been completely clear in my for sale message so to make sure
I did not mislead anyone, What's for sale is NOT a k2 but the TOP COVER AND
KAT2 AUTO-TUNER AND KIO2 CONTROL INTERFACE.
THANKS,
Reggie
___
Elecraft mailing list
Post to: El
FOR SALE:
Basic k2 qrp top cover with kat2 auto-tuner, and kio2 computer interface
with cable. and speaker.Includes all manuals. Has foam tape installed to
fit kdsp2 module. All work to specifications. Shipped for $255.00. Contact
off list please.
Reggie k6xr
k2/100 4112
I have for sale a Tandem Match Power / SWR meter, (ARRL handbook).
This a very accurate Power / SWR meter that I have build into a K2 project
enclosure.
It fits nicely on top or underneat of the K2. The power ranges are 5, 10,
50,
100, 200 and 500 Watt. The ranges are defined with high precition
This is a brand-new, unbuilt K2, all packages still sealed, just as received
from Elecraft.
This fabulous dream rig has the following optional features:
K60XV - 60M & RTR INF
KAF2 - Audio filter & Real Time Clock
KAT2 - Automatic antenna tuner
KBT2 - Internal battery option
KIO2 - Serial port
For Sale: A K2 top cover with a KIO2, KAT2 and KBT2 installed in perfect
working order, ready to plug in and use. This top cover was put on the
shelf when replaced by a KPA100. I haven't used it since the first of the
year so I'm selling it. All items work great and are ready to go. The KIO2
co
I have a KAF2 for sale. It's built and works great. It's ready to plug in
and use. It was replaced with a KDSP2. Please make me an offer via email.
I'll pay for shipping. Please USA and Canada only.
Thanks,
Roger, W1EM
___
Elecraft mailing list
P
I don't use it so it's going. It's built and working ready to be installed.
I used it for a while but found the blinking light distracting, but it works
as advertised. Please make me an offer via email. I'll pay for shipping.
Please USA and Canada only.
Thank you,
Roger, W1EM
_
The top cover and all options mentioned are ready to go. Just plug it in
and go. This top cover was replaced when I built a KPA100. It's been
sitting around for a couple of months so I'm selling it. All items work
great and are ready to go. The RS-232 cable is not built. The unbuilt
cable is i
FOR SALE - Elecraft Special Edition Hexkey serial #E016. Key is wired up
and ready to plug into a K2 (gold plated Radio Shack 1/8" stereo jack). The
key is in like new condition and works great.
Why am I selling it? My other key is a Schurr PROFI-2 which was put on the
shelf for a few months wh
KFL1-4 surplus to my needs. Completely built and aligned covers 40-30-20-15
meters. Comes with crystals for 10MHZ WWV RX and 17 meters, manuals and
instructions. I will ship to CONUS for $110.00, can accept PayPal or money
order.
73, Wayne K8FF
__
Ok, so I goofed: When I took my KX1 out after a number of months of
non-use, the antenna tuner wasn't working. I figgered it was a problem
with the tuner; I checked, reheated, rewound, checked some more and
still no-go. So I ordered another KXAT1 and assembled that -- a lo and
behold! it didn
NOTE: The cover and accessories have been sold.
- Original Message -
From: "Tom Althoff" <[EMAIL PROTECTED]>
To: "Elecraft"
Sent: Friday, December 31, 2004 4:54 AM
Subject: [Elecraft] [For Sale] KAT2 + KBT2 + K2 cover with speaker
I've decided to leav
OOPS I forgot the KIO-2 is part of that cover as well. Make that
$200 total ($50 for the $89 KIO-2).
Tom K2TA
- Original Message -
From: "Tom Althoff" <[EMAIL PROTECTED]>
To: "Elecraft"
Sent: Friday, December 31, 2004 4:54 AM
Subject: [Elecraft] [
I've decided to leave my K2 as a K2/100 and order a KAT100-1 to set it on.
So if anyone is thinking about adding the KAT2 or KBT2 to their K2 I am selling
my old cover. It has the KAT2 auto-tuner and the KBT2 internal battery option
installed. The KBT2 is less than 3 months old.
I'm aski
I'm selling one of my K2s, s/n 3155, which has the following options
installed: KNB2, KAF2,
KSB2 & K160M. I purchased this K2 in Dec. of 2002, and built it in 2003.This
K2 was built with the K2 toroid kit from "The Toroidguy," AA3WF. Price is
$750, including shipping. Email me at w2vdarrl.net or mr
I'm selling my K2, s/n 3155, along with an unbuilt KPA100 kit. K2 s/n 3155
is stock (no mods), and has the following options installed: KNB2, KAF2,
KSB2 & K160M.
I purchased this K2 along with the KPA100 kit in Dec. of 2002, and
built it in early 2003.This K2 was built with the K2 toroid kit from
K8ZT's Fall Clearance Sale
**
Please reply directly to me and not to the mailing list.
Refer to item #s when inquiring. PLEASE INCLUDE ITEM NAME and number IN
E-MAIL SUBJECT.
***(Please read all notes below the list of equipment.)
I have for sale my spare K2 (serial # 4278)
This has the SSB option and 160M option, with the MH2 elecraft Mike.
All in excellent (as new) condition and ready for shipping.
Asking $650US or best offer or equivalent local funds, plus about $40
postage (e-mail for costs to other countries).
Pleas
Hi All,
Just a reminder that my eBay auction for an Elecraft K2 Firmware Upgrade
(2.03d MCU / 1.07 IOC) ends in just over 24 hours at 10:56 a.m. Pacific time
(1756 UTC) on Tuesday, October 5th. THIS IS NOT THE CURRENT RELEASE. It is
one release back from the current 2.04P/1.09 release.
As
Hi All,
Just a reminder that I have a KAF2 for sale on eBay. The auction ends at
9:30 a.m. Pacific time (1630 UTC) on Friday, October 1st. Visit:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5722470361
to bid on it. The current high bid is $62.50 as of 7:00 a.m. Pacific time
(1400 UTC)
Hi All
I have a K1 with all options including the 40, 30, 20, and 15 meter four band
board (with blue trimmer caps) It also has a extra two band board set up for 80
and 17 meters. It includes the noise blanker, internal automatic antenna tuner
and internal battery option. It also includes the
Transverter is set up for use with K2/100. Built from manual
11/7/03 rev B.
Adaptor for N to UHF included.
I will ship and insure Con USA.
Price is $400.00
Please contact me off list.
Thank you Gil K8EAG
__
Hi,
I have for sale a K2 #03893 with the options:
KSB2,K160RX,K60XV,KNB2,KAF2,KAT2,KIOS2,KBT2 and Firmware upgrade to Revision
2.04
the microfon plug is wired for Yeasu-microfons.
if you are interested in the rig let me know: Tel +49-2824-7508 or
mailto:[EMAIL PROTECTED]
Oliver, DL1EJA
__
Hi
I just completed a K1 with all of the options except the internal battery. This
K1 was built for sale and is new and unused. It has the 40, 30, 20, and 15
meter four band board and also has a extra two band board set up for 80 and 17
meters. It includes the noise blanker and internal automat
801 - 889 of 889 matches
Mail list logo