I have decided to go in a new direction for a while, and am posting my
K2-100 (Serial 4991) For Sale:
K2
KAT2
KPA100
KAT100-1
KSB2
KDSP2
KIO2
KNB2
FDIMP
DL1
Heil MD2 Desk microphone and CB1 chrome stand, retro-style 'ELECRAFT' base.
Rework Eliminator for Microphone assembled but not
My K3 is keeping me busy so my K2 is idle. So its time to sell.
K2 SN 1653 with
KAT2
KAF2
KNB2
K160 RX
All manuals
This K2 is set up for CW only at present. I did most Rev. "B"
upgrades that pertains to QRP CW operating. Everything works as per
Elecraft specs. except for very low output o
K2 SN 1653 with
KAT2
KAF2
KNB2
K160 RX
All manuals
This K2 is set up for CW only at present. I did most Rev. "B"
upgrades that pertains to QRP CW operating. Everything works as per
Elecraft specs. except for very low output on 160 M. where I only get
about one half watt output power.
K2 #1653 has been sold.
Thanks
Rick Dettinger K7MW
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/ele
K3's on it's way so it's time to sell my K2. This is SN 1309 and has been
used in many successful VHF/UHF contests. Consists of:
K2
KSB2
K160RX
K60XV
KNB2
KDSP2
KAT2
KIO2
KBT2
Email off list to discuss.
Thanks,
Phil K3TUF
___
Elecraft mailing list
Post
I have FS a very nice basic K2. It was my main station rig up until last
Friday.
I replaced it with a new K2. It has all of the connectors for accessories
already
installed. All you have to do to install your accessories is to remove a few
jumpers. It works great and I have never had any pro
I still have K2 #2571 for sale. It is the basic CW K2. I have kept it up to
date with all the Elecraft recommended updates including the latest firmware
revision. If interested contact me off list. Price is $450 plus shipping.
Thanks
Brent WB4X
__
K2 SN4776, KSB2, K160RX, KAF2, KAT2, KDIMP, KBT2- $600 shipped
Original builder. Pictures available. Reply off list.
73
Joe
W6AYC
jpur...@verizon.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/e
A friend has a K2/100 for sale, in perfect running (and cosmetic)
condition. If you are interested, please e-mail me with an offer.
73,
George T Daughters, K6GT
CU in the California QSO Party (CQP)
October 5-6, 2013
__
Elecraft maili
I have a K2 S/N 26XX, for sale.
Cosmetics great, functions great, this is a CW only basic unit with only the 160
Meter/RX module installed.
Includes OP manual and Mini-Manual s well as power cable.
Board has "B" revisions
Shipped CONUS for $560.00
__
I have K2/100, serial number 5439 for sale. I built this rig in late spring
and summer of this year. It is in new condition and only six months old.
I have been building kits for 30+ years including several from Elecraft.
The radio and it's options all work great.
The K2 comes with the follow
I have K2, serial number 5439 for sale. I built this rig in late spring
and summer of this year. It is in new condition. I have been building kits
for
30+ years including several from Elecraft. The radio was very carefully
built
and it was aligned using Spectrogram.
It puts out full power o
I have K2 #5439 that I would like to sale. The K2 has the following
options;
KNB2 noise blanker
KSB2 SSB option
K160RX 160M / RX antenna
KAF2 Audio Filter Real Time Clock
KPA100 100 Watt PA
KAT100-1 150 Watt ATU
The radio and all accessories were very carefully built and all work great
with
For sale Professionally wired K2/w Heil hand mike and dimple. Followed by
professional alingment.Not a single deficit. Not yet two years old will be
available for the costs of unassembled parts plus shipping/insurance. I'll
swap for a mint 2KL w/ten meters and AT500.
Talk to me about higher p
I build up my K2 for 2004 Field Day.
It's a great radio and I really like it, but except
for portable/field use the knobs, buttons are too
small for my meat hooks.
I've been a QRO contester (mainly because I like
running strings) and I guess I'm gonna sell my K2,
FT847 and a couple of others and
Entire rig spoken for.
Thanks es 73,
Tom, ng3v
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of NG3V
Sent: Tuesday, July 21, 2009 3:54 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] K2 FS
I have decided to go in a new
Hi elecrafters, i have for sale a Elecraft K2DSP module. 100% ok and ready for
use. It comes with manual, standoff and screw. The only missing parts are the
3-pin and the 2-pin connectors. Firmware is the latest version. 150,00 Euro
inclusive shipping to European locations. For Non-EU please ask
Corrected...
- Original Message -
From: "Brent Sutphin" <[EMAIL PROTECTED]>
To:
Sent: Sunday, November 26, 2006 3:35 PM
Subject: [Elecraft] K2 FS
I have K2/100, serial number 5439 for sale. I built this rig in late
spring
and summer of this year. It is in new co
I buy a K3 and sell my K2 in EU :
recently built and aligned ( # 5632 ) by an experienced US builder and perfectly
working.
Options : SSB, DSP, internal ATU, 160 mtr RxTx module, internal battery, RS232
I/O interface.
I also checked OK the main specs in my measurement lab : MDS, BDR, IMD3
No one grabbed the K2 at the old price. OK, A new K2 (serial #52XX) with the
following:
K160RX
K60XV
KDSP2
KNB2
KSB2
FDIMP
It is your radio for $995 plus shipping.
73
Alan
W1HYV
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be
For sale to fund purchase of KX3:
KDSP2 module for K2.
I am asking $200 shipped within CONUS.
My email address can be found on my website:
http://home.frognet.net/~mcfadden/wd8rif/radio.htm
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K2-FS-KDSP2-module-tp7579087.h
I purchased K2 #5723 as an unfinished kit. I completed the assembly,
and added the following accessories:
K160RX - 160m option + RX antenna input
KAF2 - Audio Filter
KAT2 - 20w Internal ATU
KDIMP - finger Dimple
KIO2 - RS-232 Serial Interface
KNB2 - Noise Blanker
KSB2
I decided not to install the KBT2 and am using the KDSP2, so I have no
need for the KAF2.
The KBT2 is an unbuilt kit. It does not include the battery
(replacement batteries are available directly from Elecraft), so
technically this is the KBT2-X. Retail price is $49.95. I'm offering
it for $37.50
For Sale: Unbuilt Elecraft EC2 Enclosure. Rev. C, November 7, 2002 $45
including postage.
I can email photos if required.
$45 US including shipping via the postal system to Canada or the US.
Paypal preferred.
For those in the US, please note that the kit will be shipped from
Canada and import
Sorry, no K4 content here...
I bought tuner this several years ago from the ham who built it, and it works
well. I have been using my KPA100/KAT100 combo, and I have a T1 for low-power,
so I no longer need this.
I have the original manual, and the hardware to mount it into the K2's lid. The
cu
*/Price reduced!/*For sale to fund purchase of KX3: KDSP2 module for K2. I am
asking *$175* shipped within CONUS. No, I am not parting out my K2--I've
just found I prefer the audio provided by the KAF2 over that provided by the
KDSP2. My email address can be found on my website:
http://home.frognet
Price reduced!
For sale to fund purchase of KX3:
KDSP2 module for K2.
I am asking $175 shipped within CONUS.
No, I am not parting out my K2--I've just found I prefer the audio provided
by the KAF2 over that provided by the KDSP2.
My email address can be found on my website:
http://home.fro
My K2 has become my primary field radio for activations in Summits On
The Air and I really have no need for the KPA 100 100W amp and KAT100
100W autotuner anymore. I thought I'd offer them here first.
The KPA100 is the K2-installed version replacing the standard K2 top.
Takes about 3 mins, at
I have the following items for sale.
KPA100 $300 (shipping within US included)
KAT100-1 $180 (shipping within US included)
Both items for $470.
Both items are in excellent condition and work correctly. I am keeping my
twelve year old K2 but selling these items to help finance a K3. Pictures
a
Both items have been sold. Thanks!
73, Pat K0PC
>I have the following items for sale.
>
>KPA100 $300 (shipping within US included)
>
>KAT100-1 $180 (shipping within US included)
>
>Both items for $470.
>
>Both items are in excellent condition and work correctly. I am keeping my
>twelve year ol
Good Morning,
I've been using an MH2 mic with my K2, and it works well - I get good signal
reports. However, the mic cord has repeatedly failed with randomly open wires
inside of the curly-cord, so I bought this Kenwood MC-43S as a possible
replacement.
It's too small for my catcher's mitt-s
Sold pending funds.
Darrell Bellerive
On 12-09-23 08:40 PM, Darrell Bellerive wrote:
> For Sale: Unbuilt Elecraft EC2 Enclosure. Rev. C, November 7, 2002 $45
> including postage.
>
> I can email photos if required.
>
> $45 US including shipping via the postal system to Canada or the US.
> Paypal
Sold
Darrell Bellerive
> On 12-09-23 08:40 PM, Darrell Bellerive wrote:
>> For Sale: Unbuilt Elecraft EC2 Enclosure. Rev. C, November 7, 2002 $45
>> including postage.
>>
>> 73,
>> Darrell
>> VA7TO
>>
__
Elecraft mailing list
Home: http:
I have a K2/10 with KSB2, KAT2 and KIO2 available for sale.
This is Serial Number 1095, but has been fully upgraded with all mods
installed and new IF filter crystals and the KSB2 filter width changed
to the more recent 2.4 kHz bandwidth.
I will align the filters to your chosen sidetone pitch,
The mic has been sold. Thanks.
73,
Jim KO5V
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qs
I've decided to offer up for sale the KPA100/KAT100/KIO2 I built in an EC2
enclosure earlier this year. I built this setup to augment my K2 (QRP CW only)
when I'm at my home station. The setup works very well, but I find that I'm
operating CW QRP almost exclusively, so I don't see leaving this
Perfect companion for your K2. KAT100-1 Auto Antenna Tuner. 150W. Built from
kit in December, 2011. Never used. All tests successfully completed. (Buyer
will need to complete rig-half of the K2 interface cable to suit your
installation).
Complete with all interconnect cable parts, power
The KAT100 auto tuner has been sold. Thanks to all who replied.
73,
Terry, W0FM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.n
Price reduced!
For sale to fund purchase of KX3:
KDSP2 module for K2.
I am asking $150 shipped within CONUS.
No, I am not parting out my K2--I've just found I prefer the audio provided
by the KAF2 over that provided by the KDSP2.
My email address can be found on my website:
http://home.fr
Late model K2 (S/N 6254), latest firmware.
Includes: KIO2, KSB2, K160RX, K60XV, KDSP2.
KPA100 & KAT100 in external EC-2 enclosure.
Assembled with professionally wound toroids, Rework Eliminator Un-PCB
kit and Internal
Mic Adapter.
All manuals and cables.
$1600 includes USPS Priority Mail to CO
I have a just finished a new Elecraft K2 with options except 100 Watt PA.
Including DSP2, Internal Battery, Serial Port, 60 meters, 160 meters, NB,
SSB, Internal Antenna tuner, Rework Eliminator kit installed. $1000
shipped. I accept Paypal. Email for photos. Non-smoking enviroment. New this
cost
"Setting a price is a bit difficult for me"
Maybe I can help.
A similar unit just sold on this list for $375 shipped.
http://elecraft.365791.n2.nabble.com/FS-KPA100-KAT100-in-EC2-inclosure-td5381284.html#a5381284
"I can determine that to buy the kit new from elecraft, unassembled, would
cost ab
For sale a complete unbuilt kit of the EA3BLQ (sk) Digital interface for
the K2. This is V.III of the K2DI and the K2DI-PCI.
The details of the kit are at http://www.qsl.net/ea3blq/k2di_pci_tec_ang.htm
The manual is at
http://www.qsl.net/ea3blq/downloads/k2di-pci_const_manual.pdf
I bought thes
I have installed the 100 watt amp and this is surplus to my needs. $140.00
shipped to USA only. Preferr Paypal payment. Tnx George/W2BPI
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K2-FS-cover-with-speaker-and-KAT2-tuner-tp6491782p6491782.html
Sent from the Elecraft mai
Hello,
See https://wilcoxengineering.com/2020/06/09/selling-extra-equipment for
info and photos.
Cheers,
Alan
--
Alan D. Wilcox, W3DVX (K2-5373, K3-40, SKCC 22955)
570-916-9590 (cell, text)
https://WilcoxEngineering.com
http://www.eham.net/reviews/detail/6768 ... Elecraft Client Comments
htt
Price reduced to $70 including shipping to the Canadian Provinces or
Continental US. See my website for details http://va7to.ca
73, Darrell VA7TO
Darrell Bellerive
On 12-11-04 05:17 PM, Darrell Bellerive wrote:
For sale a complete unbuilt kit of the EA3BLQ (sk) Digital interface for
the K2. T
I have a few extra parts for my K2 that I won't use:
1. Unbuilt Softrock LiteII Receiver kit with the XTAL for the K2's IF. I was
going to use this receiver for a panadapter, but I used the Clifton Labs'
buffer amp instead. $15.00 mailed in the USA;
2. KBT2 Internal battery parts MINUS the bat
PS ... The K2 also has the IMA, "K2 Internal Mic Adaptor" configured for
Heil microphone at the moment.
Hello,
See https://wilcoxengineering.com/2020/06/09/selling-extra-equipment for
info and photos.
If you're interested in buying, contact me off list.
Cheers,
Alan
Alan D. Wilcox, W3DVX
SOLD ... Many thanks to all who inquired and/or bid.
Cheers, Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40, SKCC 22955)
570-916-9590 (cell, text)
On 6/18/21 13:50, Alan D. Wilcox wrote:
PS ... The K2 also has the IMA, "K2 Internal Mic Adaptor" configured
for Heil microphone at the moment.
Hello
49 matches
Mail list logo
