You're experiencing why I stopped using Apple Computers and
developing software for them in 1985.
They are good computers but Apple does not make it easy for
developers to create software for their computers (very expensive
development tools). That caused x86 and x64 based computer sales
Likewise here.
73,
Bill
K9YEQ
-Original Message-
Leigh/WA5ZNU
[snip]
You're experiencing why I stopped using Apple Computers and developing
software for them in 1985.
They are good computers but Apple does not make it easy for developers
to create software for their computers (very
You could be wrong. ;-)
You're making a pretty definitive statement based on 24+ year-old
experiences. A lot has changed since then for both Mac and Windows
platforms. Are you still developing for DOS 3.0? Windows 1.0?
Not trying to fan a Mac/Win flame war, but if you can't find quality,
On Oct 7, 2009, at 10/76:50 AM, Radio Amateur N5GE wrote:
You're experiencing why I stopped using Apple Computers and developing
software for them in 1985.
They are good computers but Apple does not make it easy for developers
to create software for their computers (very expensive
On Wed, 7 Oct 2009 08:03:51 -0700 (PDT), David Fleming
df...@yahoo.com wrote:
You're experiencing why I stopped using Apple Computers and
developing software for them in 1985.
They are good computers but Apple does not make it easy for
developers to create software for their computers (very
On Wed, 7 Oct 2009 10:06:22 -0700 (PDT), Paul - WW2PT ww...@arrl.net
wrote:
You could be wrong. ;-)
That's what I said
You're making a pretty definitive statement based on 24+ year-old
experiences. A lot has changed since then for both Mac and Windows
platforms. Are you still developing
Are the RF calibration values saved in the configuration file?
Brian/K3KO
Wayne Burdick wrote:
K3 beta-test firmware revision 3.41 (with DSP rev. 2.37) is now
available. See release notes below.
More refinements are in the works. But alas, it was time to shoot the
engineers and get some
No, they are saved in the K3 EEPROM only.
Dick, K6KR
Sent from my iPhone
On Oct 6, 2009, at 1:08 PM, Brian Alsop als...@nc.rr.com wrote:
Are the RF calibration values saved in the configuration file?
Brian/K3KO
Wayne Burdick wrote:
K3 beta-test firmware revision 3.41 (with DSP rev.
.
Dick, K6KR
From: Joe Barger [mailto:jrb17...@gmail.com]
Sent: Tuesday, October 06, 2009 2:13 PM
To: Dick Dievendorff
Subject: Re: [Elecraft] K3 Beta Firmware Rev. 3.41: Improved RX bass
response; Flat DATA-mode EQ; Live memory recall; etc.
Hmmm ... what other configuration/calibration
Could we get an estimate on when the non-Windows platform K3 Utilities
1.2.9.30 will be ready? The K3_software page is a bit stale on this topic.
I need to decide whether to go get a Windows laptop set up to run the RF
gain calibration, and I'm sure others would like to know as well. (It's
K3 beta-test firmware revision 3.41 (with DSP rev. 2.37) is now
available. See release notes below.
More refinements are in the works. But alas, it was time to shoot the
engineers and get some interim feedback on the many new features in
this revision.
--
IMPORTANT NOTE
Hi Paul,
Just plugging in a mono plug by itself is not detectable in firmware.
The protection kicks in as a result of a brief spike in AF amp current
drain. To observe this you need a mono plug, SPKRS=2, and moderate to
high volume setting with a strong signal in the passband. This will
wayne burdick wrote:
K3 beta-test firmware revision 3.14 (with DSP rev. 2.16) is now
available. For details, see the release notes below.
I tried upgrading in the background while having breakfast, but something went
wrong. I'll
have to investigate once I get back home. In the meantime, I'd
Jon I had no trouble loading in 3.14 and all worked for me.
Hope it works out ok for you. Might try downloading it again.
Ron NA9F
I tried upgrading in the background while having breakfast, but something
went wrong. I'll
have to investigate once I get back home. In the meantime, I'd
OK here to - no problem
Terry G4POP
Jon Kåre Hellan wrote:
wayne burdick wrote:
K3 beta-test firmware revision 3.14 (with DSP rev. 2.16) is now
available. For details, see the release notes below.
I tried upgrading in the background while having breakfast, but something
went wrong.
G4POP wrote:
OK here to - no problem
Terry G4POP
Thans to both of you. No more replies needed :-)
Jon LA4RT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Upgraded mine last night. No problems.
- Original Message -
From: G4POP tge...@btinternet.com
To: elecraft@mailman.qth.net
Sent: Wednesday, May 13, 2009 8:15 AM
Subject: Re: [Elecraft] K3 beta firmware revision 3.14 now available
OK here to - no problem
Terry G4POP
Jon Kåre
Just out of curiosity Jon, but what error did you get during the upgrade?
73 de James K3JPS/2
On Wed, May 13, 2009 at 8:35 AM, Jon K Hellan hel...@acm.org wrote:
G4POP wrote:
OK here to - no problem
Terry G4POP
Thans to both of you. No more replies needed :-)
Jon LA4RT
K3 beta-test firmware revision 3.14 (with DSP rev. 2.16) is now
available. For details, see the release notes below.
Please send any problem reports to k3supp...@elecraft.com. For
instructions on how to load beta firmware, please see:
http://www.elecraft.com/K3/k3_software.htm
We
To: Elecraft Reflector
Subject: [Elecraft] K3 beta firmware revision 3.11 now available
K3 beta-test firmware revision 3.11 (with DSP rev. 2.15) is now
available. For details, see the release notes below.
Please send any problem reports to k3supp...@elecraft.com. For
instructions on how to load beta
K3 beta-test firmware revision 3.11 (with DSP rev. 2.15) is now
available. For details, see the release notes below.
Please send any problem reports to k3supp...@elecraft.com. For
instructions on how to load beta firmware, please see:
http://www.elecraft.com/K3/k3_software.htm
We
is anyone able to download this...or do I have a computer problem?
--
View this message in context:
http://n2.nabble.com/K3-beta-firmware-revision-3.11-now-available-tp2672594p2673230.html
Sent from the Elecraft mailing list archive at Nabble.com.
I had no problems.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of K7WIA
Sent: Tuesday, April 21, 2009 7:48 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 beta firmware revision 3.11 now available
is anyone
No problem but it's really hard to find it.
Steve Ellington
n...@carolina.rr.com
- Original Message -
From: Sanger, Joseph joseph.san...@nyumc.org
To: elecraft@mailman.qth.net
Sent: Tuesday, April 21, 2009 7:46 PM
Subject: Re: [Elecraft] K3 beta firmware revision 3.11 now available
I
I must be doing something wrong,,
I go to the software page.
MCU3.11/dsp2.15is green,.. can't click on it to download
am I in the wrong place
--
View this message in context:
http://n2.nabble.com/K3-beta-firmware-revision-3.11-now-available-tp2672594p2673266.html
Sent from the Elecraft
On Apr 21, 2009, at 6:46 PM, Sanger, Joseph wrote:
I had no problems.
I'm happy for those of you more perceptive than I, but if there's a
download link there it must be some kind of contest to find it.
No link. I've tried 3 different browsers.
Grant/NQ5T
Go to the bottom of the link to Software and click the FTP link then
Firmware. You'll find 3.11 there.
Steve Ellington
n...@carolina.rr.com
- Original Message -
From: K7WIA emoss98...@msn.com
To: elecraft@mailman.qth.net
Sent: Tuesday, April 21, 2009 7:58 PM
Subject: Re: [Elecraft] K3
: Re: [Elecraft] K3 beta firmware revision 3.11 now available
I must be doing something wrong,,
I go to the software page.
MCU3.11/dsp2.15is green,.. can't click on it to download
am I in the wrong place
--
View this message in context:
http://n2.nabble.com/K3-beta-firmware-revision
On Apr 21, 2009, at 7:22 PM, Steve Ellington wrote:
Go to the bottom of the link to Software and click the FTP link then
Firmware. You'll find 3.11 there.
And so it is :-)
Grant/NQ5T
__
Elecraft mailing list
Home:
Oops! I mistakenly deleted the link for beta download instructions when
I edited the K3 software page. It is now there.
See http://www.elecraft.com/K3/k3_software.htm
There is a link for beta download instructions in red right under the
beta release version number and title. The beta
got it bookmarked now.
tnx...Ed
--
View this message in context:
http://n2.nabble.com/K3-beta-firmware-revision-3.11-now-available-tp2672594p2673479.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft
K3 beta-test firmware revision 3.10 (with DSP rev 2.15) is now
available. For details, see the release notes below.
Please send any problem reports to k3supp...@elecraft.com. For
instructions on how to load beta firmware, please see:
http://www.elecraft.com/K3/k3_software.htm
We
-
From: elecraft-boun...@mailman.qth.net [mailto:elecraft-
boun...@mailman.qth.net] On Behalf Of wayne burdick
Sent: Wednesday, April 01, 2009 4:23 PM
To: Elecraft Reflector
Subject: [Elecraft] K3 beta firmware rev. 3.06: all-mode squelch; SSB
power control improved
K3 beta-test firmware
Hello All,
Anyone who have test equippments can confirm firmware rev.3.04/3.06
don't have power spine?
73s David / BA4RF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
On Wed, 1 Apr 2009 16:25:58 -0700, wayne burdick n...@elecraft.com
wrote:
Yahoo!
Thanks for letting me QSX on 6m and 2m white noise without hearing it!
This does two things for me:
1: Don't have to listen to the white noise.
2: Now When there is a signal on one of the two K3s I can tell which
Thank you Wayne! All-mode squelch sounds great. Can't wait to try this
when I get home.
73,
James K3JPS
On Wed, Apr 1, 2009 at 7:23 PM, wayne burdick n...@elecraft.com wrote:
K3 beta-test firmware revision 3.05 (with DSP rev 2.12) is now
available. For details, see the release notes below.
K3 beta-test firmware revision 3.05 (with DSP rev 2.12) is now
available. For details, see the release notes below.
Please send any problem reports to k3supp...@elecraft.com. For
instructions on how to load beta firmware, please see:
http://www.elecraft.com/K3/k3_software.htm
We
I am forever amazed at the extent you all are willing to go to make
the K3 and Elecraft exceptional.
Thanks!
Gary
KA1J
K3 beta-test firmware revision 3.05 (with DSP rev 2.12) is now
available. For details, see the release notes below.
-
From: ab2tc ab...@arrl.net
To: elecraft@mailman.qth.net
Sent: Friday, March 27, 2009 6:14 PM
Subject: Re: [Elecraft] K3 Beta firmware Rev. 3.04: AGC fixed; various
improvements
Hi Wayne,
Another minor quirk to report regarding the cross band A/B switching. If
the B VFO is on another band
Hi Wayne,
Another minor quirk to report regarding the cross band A/B switching. If
the B VFO is on another band, pressing the A-B button causes a minor
pause in the audio. No relays clicking but a definite pause in the
audio. No big deal at all, but when A and B are on the same band, this
K3 beta-test firmware revision 3.04 (with DSP rev 2.11) is now
available.
The most noticeable change is that the problem with normal AGC decay
(CONFIG:AGC DCY=NOR) has been fixed; you can now use NOR or SOFT decay.
(SOFT decay is designed for use in pileups, but also improves fidelity
in
Hi all,
I just made the upgrade to 3.04 after a long period of skipping upgrades. I am
very happy to report that the A/B VFO switch now works across bands *without*
having the sub-receiver. I am not sure why Elecraft has been so reluctant to
announce this but that is water under the bridge,
Guess I forgot that it didn't work right before :)
Have fun--
Wayne
N6KR
ab2tc wrote:
I just made the upgrade to 3.04 after a long period of skipping
upgrades. I am very happy to report that the A/B VFO switch now works
across bands *without* having the sub-receiver. I am not sure why
Joe Subich, W4TV-4 wrote:
To normalize the radio's output power for any valid test you
need to measure the single tone carrier power (e.g., CW). If
you do that (press tune at 50 watts), you will recalibrate.
The recalibration will render any subsequent measurement
incompatible
Joe Planisky wrote:
To test this, I used an audio signal generator to input single tones
of various frequencies into my K3 in both LSB and DATA-A modes. I set
the power control for 30W. Here are my measurements:
AF input freq. Po-DATA-APo-LSB
TUNE25.7
I have just run a set of tests across a range of audio frequencies as did
Joe, KB8AP. The results were almost identical, so I am not going to tabulate
them here. In SSB I adjusted the input level to give sufficient drive and
just enough ALC action to result in a flat output from 600Hz to 2600Hz.
Ah! I must have been on an exact 5W setting when I did it, then, Joe.
Thanks for clearing that up.
I still think that as it's a calibration feature, it would make better sense
by being protected by the ability to turn it off. I'd really like to hear
why a calibration feature sits there
It seems as if part of the problem with the power control in DATA A mode may
be that the power calibration appears to be done at an audio frequency which
is sub-optimal for this mode. Ideally, the power calibration would be done
at the point in the filter bandpass where the transmit filter's
Planisky jp...@jeffnet.org
To: li...@subich.com
Cc: elecraft list elecraft@mailman.qth.net
Sent: Saturday, February 14, 2009 7:45 PM
Subject: Re: [Elecraft] K3 Beta firmware rev. 2.82
Hi Joe,
Further, single tone power calibration is only accurate for
the specific frequency within the IF filter
Richard Ferch wrote:
It seems as if part of the problem with the power control in DATA A mode
may
be that the power calibration appears to be done at an audio frequency
which
is sub-optimal for this mode. Ideally, the power calibration would be done
at the point in the filter bandpass
Guy, K2AV wrote:
Taking the DATA A readings below at face value, the more than 2 db bump
around 1000 Hz is rather startling. I'm not sure what could cause that,
but
at least to me that seems to be screaming for an explanation. There's an
old fireman's adage never go past fire to keep
On Feb 15, 2009, at 2/158:58 AM, Guy Olinger, K2AV wrote:
Taking the DATA A readings below at face value, the more than 2 db
bump
around 1000 Hz is rather startling. I'm not sure what could cause
that, but
at least to me that seems to be screaming for an explanation.
There's an
I'm not looking for another radio, as I've been doing what seems
obvious (to me) - using USB mode for sound card digital operation, not
DATA A. Yes, I forgo the benefit of the management of compression
setting and mic selection that comes with using DATA A - but as things
stand now one must change
, 2009 7:46 PM
To: li...@subich.com
Cc: elecraft list
Subject: Re: [Elecraft] K3 Beta firmware rev. 2.82
Hi Joe,
Further, single tone power calibration is only accurate for the
specific frequency within the IF filter on which the calibration is
performed. If I calibrate power in CW
Bob Cunnings wrote:
I'm not looking for another radio, as I've been doing what seems
obvious (to me) - using USB mode for sound card digital operation, not
DATA A. [snip]
Yes, I can see the logic in that, which is what I had to do with the K2
before the v2 firmware was released. But I
a
good idea.
73, Guy.
- Original Message -
From: Kok Chen c...@mac.com
To: elecraft list elecraft@mailman.qth.net
Sent: Sunday, February 15, 2009 12:31 PM
Subject: Re: [Elecraft] K3 Beta firmware rev. 2.82
On Feb 15, 2009, at 2/158:58 AM, Guy Olinger, K2AV wrote:
Taking
Graham Kimbell (G3TCT) wrote:
Julian
Before you do anything drastic like looking for another radio, can I ask a
silly question or 2?
If the output power is flat across the AF spectrum when using ssb mode,
why
doesn't everyone use it rather than DATA-A?
Well the main reason as I said
Steven.Zabarnick wrote:
I installed the new beta last and tested the new output power control. I
don't see any improvement in PSK31 output power using DATA A mode. I still
get nearly twice the output power than I have dialed in by the PWR knob.
In
the previous firmware, the measure
I discovered that my cw power issue was due to a bad power supply for my
Elecraft W1 wattmeter. My cw power measurement now agrees with the K3
setting. I still see a 50% higher power output in Data A mode than the K3
setting -- this is an improvement over the nearly 100% that I was seeing
using
: Saturday, February 14, 2009 11:58 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Beta firmware rev. 2.82
Steven.Zabarnick wrote:
I installed the new beta last and tested the new output
power control.
I don't see any improvement in PSK31 output power using
DATA
Joe Subich, W4TV-4 wrote:
You CAN NOT make those tests at 50 Watts! The power calibration
circuitry will be constantly changing the internal gain. If
the ATU is enabled and/or your dummy load is not flat the changes
invalidate the measurements.
Why on earth not? I think you are
.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Julian, G4ILO
Sent: Saturday, February 14, 2009 3:44 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Beta firmware rev. 2.82
Joe Subich, W4TV-4
Hi Joe,
Further, single tone power calibration is only accurate for
the specific frequency within the IF filter on which the
calibration is performed. If I calibrate power in CW mode
that calibration point is approximately 300 Hz from one
corner of the 2.8 KHz filter thanks to the way the
So, if I'm tuning up through, say, a Z-Match into a doublet and power output
is set to around 5 or 50W and press Tune in order to tweak the Z-Match,
the initial (off-tune) complex impedance the K3 may see could very well
cause the K3's output power to change to 5 or 50W and because of that,
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of David Lankshear
Sent: Saturday, February 14, 2009 7:56 PM
To: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Beta firmware rev. 2.82
So, if I'm tuning up through, say, a Z-Match into a doublet
and power output
is set to around 5 or 50W
Conclusion must be, never ever use 5.0W or 50W except
when calibration is needed.
Why cant power calibration be turned off? Then we would
not have this source for trouble.
/ SM2EKM
Joe Subich, W4TV wrote:
So, if I'm tuning up through, say, a Z-Match into a doublet
and power output
In a recent message, wayne burdick n...@elecraft.com wrote ...
K3 beta-test firmware revision 2.82 (with DSP rev 2.00) is now
available. See release notes below.
Many thanks for the latest firmware - all installed successfully and
apparently working okay.
In a future release, would it be
hi Wayne,
wayne burdick schrieb am 10 Feb 2009 um 15:00:
* SSB/DATA-A/AFSK-A TRANSMIT POWER LEVEL: Power output in these
modes now more closely tracks TUNE power. We recommend setting
CONFIG:TXG VCE to 0.0 dB after loading this release, then adjusting only if
necessary.
* DATA MODE ALC
I installed the new beta last and tested the new output power control. I
don't see any improvement in PSK31 output power using DATA A mode. I still
get nearly twice the output power than I have dialed in by the PWR knob. In
the previous firmware, the measure output power in CW modes agreed with
Hi Steve,
Seems to work correctly here even if I exceed the recommended 5 bars of
ALC.
73 Doug N3QW
- Original Message -
From: steven.zabarn...@notes.udayton.edu
To: elecraft@mailman.qth.net
Sent: Wednesday, February 11, 2009 9:16 AM
Subject: Re: [Elecraft] K3 Beta firmware rev
On Wed, 11 Feb 2009 09:16:45 -0500, you wrote:
I installed the new beta last and tested the new output power control. I
don't see any improvement in PSK31 output power using DATA A mode. I still
get nearly twice the output power than I have dialed in by the PWR knob. In
the previous firmware,
I don't see a problem with CW on my K3 (29.4W measured, 30W
requested,) but there are definitely still problems with excessive
power output in DATA-A. DATA-A initially output the correct power,
but after switching to AFSK-A and back to DATA-A, I get well over 2x
the requested power out
Sorry, just catching up on mail backlog - thanks very much guys -
great services as always.
73 de M0XDF, K3 #174
--
The universe is like a safe to which there is a combination. But the
combination is locked up in the safe.
-Peter De Vries, editor, novelist (1910-1993)
On 27 Jan 2009, at 01:26,
K3 beta-test firmware revision 2.80 (with DSP rev 1.99) is now
available. See release notes below.
Please send any problem reports to k3supp...@elecraft.com. For
instructions on how to load beta firmware, please see:
http://www.elecraft.com/K3/k3_software.htm
We also recommend that you
Tnx Wayne for the split bug fix and the AM fix. I've tried the split fix and it
works fine. I'll try AM when I get time. I really like the new weight, firmware
upgrade. My K3 now weighs 18.7 kilos. I feel better now. You may want to have a
menu for the new weight option so it may be turned off
Wayne, does that include if actived due to VOX?
--
The high minded man must care more for the truth than for what people
think. -Aristotle, philosopher (384-322 BCE)
On 26 Jan 2009, at 22:01, wayne burdick wrote:
* DVR TERMINATION VIA PTT: Activating PTT will immediately stop DVR
transmit
M0XDF wrote:
Wayne, does that include if actived due to VOX?
* DVR TERMINATION VIA PTT: Activating PTT will immediately stop DVR
transmit message playback.
Not yet. At present the DVR's TX message playback audio appears just
like mic audio internally to the DSP, so VOX operation is
Wayne, does that include if actived due to VOX?
No, PTT only. Currently, the DVR output for Tx follows the same path in
the DSP as any other Tx audio source, so it is already activating VOX.
73,
Lyle KK7P
___
Elecraft mailing list
Post to:
Hope you can get to that soon, since I use the VOX a lot, especially
in contests. It's great VOX, I'd hate to have to stop using it. Thanks
for doing the PTT bit anyway.
--
It is not how old you are, but how you are old. -Jules Renard, writer
(1864-1910)
On 26 Jan 2009, at 23:18, wayne
The PTT switch will work to stop the DVR, even if you're using VOX when
normally transmitting. But yes, this is on the list.
tnx
Wayne
N6KR
On Jan 26, 2009, at 3:38 PM, David Ferrington, M0XDF wrote:
Hope you can get to that soon, since I use the VOX a lot, especially
in contests. It's
Yes, thanks Wayne Lyle, I realised I could do that, have to get the
footpedal out again :-)
Thanks much, great support as always and a lot we are asking you to do.
73 de M0XDF, K3 #174
--
The secret of life is honesty and fair dealing. If you can fake that,
you've got it made. -Groucho Marx
Actually, Lyle just looked into using VOX to stop the DVR, and he seems
to have now implemented it at the DSP. I'll get it into the next MCU
revision.
73,
Wayne
N6KR
David Ferrington, M0XDF wrote:
Yes, thanks Wayne Lyle, I realised I could do that, have to get the
footpedal out again :-)
I'd be interested in having the DVR TX audio still play at (some
volume). Perhaps a DVR MON level or at volume POT level. I often have
my monitor level at 0 for SSB but when I press DVR TX I kinda expect to
hear it. However I like to have it at zero so as to guarantee feedback
mitigation.
Activating PTT durring the pause between repeating DVR playback, does not
stop playback. It would be nice to stop repeat playback with PTT, when a
station returns your call between transmissions.
Bob W9RFS
wayne burdick wrote:
Actually, Lyle just looked into using VOX to stop the DVR, and he
I just tried shutting down the DVR TX by tapping my keyer and that
doesn't seem to work... Tapping the key transmits when in SSB mode so
it seems to reason that I would be able to interrupt DVR TX using that
method. Granted most of the time I'll probably interrupt via VOX but it
seems like the
Brett,
Unlike the K2, the K3 keying and the PTT are separate. It is PTT (only)
that currently stops DVR playback, and VOX de-activation is a coming
attraction. I am certain Wayne and Lyle will consider your request that
a key tap will terminate DVR palyback, but I cannot speak for their
Can do, and I'll add this when I add VOX termination of DVR playback.
73,
Wayne
N6KR
On Jan 26, 2009, at 8:37 PM, Don Wilhelm wrote:
Brett,
Unlike the K2, the K3 keying and the PTT are separate. It is PTT
(only) that currently stops DVR playback, and VOX de-activation is a
coming
With the 1.2.1.6 K3 Utility for OSX I get the message that I have the newest
firmware although it is 02.73.
Does anyone have a direct link to download 02.78?
--
View this message in context:
The direct link is:
ftp://ftp.elecraft.com/K3/firmware/beta/
73 Dave, G4AON
K3/100 #80
With the 1.2.1.6 K3 Utility for OSX I get the message that I have the newest
firmware although it is 02.73.
Does anyone have a direct link to download 02.78?
, January 15, 2009 9:53 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Beta firmware rev. 2.78: Sign-on banner and
misc. improvements
With the 1.2.1.6 K3 Utility for OSX I get the message that I have the newest
firmware although it is 02.73.
Does anyone have a direct link to download 02.78
I found it... :blush:
LB3SA wrote:
With the 1.2.1.6 K3 Utility for OSX I get the message that I have the
newest firmware although it is 02.73.
Does anyone have a direct link to download 02.78?
--
View this message in context:
/user/SendEmail.jtp?type=nodenode=2164147i=2
Subject: Re: [Elecraft] K3 Beta firmware rev. 2.78: Sign-on banner and
misc. improvements
With the 1.2.1.6 K3 Utility for OSX I get the message that I have the newest
firmware although it is 02.73.
Does anyone have a direct link to download 02.78
I was able to fit STOLEN RADIO CALL 911
I'm going with WASH ME!
(I'm not the dust cover type)
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
How about GPS TRACKING ENABLED
At 08:58 AM 11/01/09, you wrote:
I was able to fit STOLEN RADIO CALL 911
I'm going with WASH ME!
(I'm not the dust cover type)
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to
How about GPS TRACKING ENABLED
Or, possibly DETONATES IN 9 SECONDS?
Terry, W0FM
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
] K3 Beta Firmware rev 2.78 (BANNER)
How about GPS TRACKING ENABLED
Or, possibly DETONATES IN 9 SECONDS?
Terry, W0FM
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber
, 2009 6:01 PM
Subject: Re: [Elecraft] K3 Beta Firmware rev 2.78 (BANNER)
today is my 72th birthday and
HAPPY BIRTHDAY 72 AA1O
is exactly 22 characters. What a great radio!!
-Bill AA1O
K2 1740
K3 287
___
Elecraft mailing list
Post to: Elecraft
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Oliver Johns
Sent: Saturday, January 10, 2009 12:50 AM
To: wayne burdick; Elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Beta firmware rev 2.78
Dear Wayne,
Are you aware that the download utility for the Mac OSX is still at
the previous
I have about 40 years of managing and working in the software development
process and have seldom seen the accuracy and rapidity been as consistently
applied to the process as Elecraft has done with its Beta program. The K3
is a VERY complex radio and the requests from the users so diverse that
I have about 40 years of managing and working in the software development
process and have seldom seen the accuracy and rapidity been as consistently
applied to the process as Elecraft has done with its Beta program. The K3
is a VERY complex radio and the requests from the users so diverse
101 - 200 of 379 matches
Mail list logo
