Probably a FAQ, but I've searched list postings for the past few months
and haven't found what I need yet.
My new K3S just found its way to my home about 24 hours ago, and at this
point I'm trying to get it set up with WSJT-X and a Mac, using a single
USB cable between the radio and the comput
On 8/18/2016 7:13 PM, Jim Brown wrote:
> Just for the record, the standard for DVD audio is 44.1 kHz 16 bit.
To make it clear according to *WINDOWS*
2 channel, 16 bit 44100 Hz (CD quality)
2 channel, 16 bit 48000 Hz (DVD Quality)
Directly from the Windows Sounds Control Panel ...
If you want
Not to hijack this thread but has anyone used WSJT-X 1.7 and JT65B
with the K3s?
Ken
--
President and CTO - Arcom Communications
Makers of repeater controllers and accessories.
http://www.arcomcontrollers.com/
Authorized
My goof. Joe is right.
CD is 44.1
73, Jim
On Thu,8/18/2016 5:13 PM, Robin Moseley wrote:
Really?from what I see 44k was CD..48K is DVD.
Robin G1MHU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listi
: elecraft@mailman.qth.net
Subject: [Elecraft] K3S and WSJT-X
I am having an issue with WSJT-X.
After hooking up my K3S to my computer and configuring it to use the sound
card it keep crashing the computer with a bug check 50 on usbaudio.sys.
Has anyone else seen this?
JT65HF HB9HQX seems to work just fi
Really?from what I see 44k was CD..48K is DVD.
Robin G1MHU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Thi
On Thu,8/18/2016 3:43 PM, Joe Subich, W4TV wrote:
2 channel, 16 bit, 48000 Hz (DVD Quality)
Just for the record, the standard for DVD audio is 44.1 kHz 16 bit. I'm
not suggesting that there's a BIG difference in quality. :)
73, Jim K9YC
__
raft@mailman.qth.net
Subject: [Elecraft] K3S and WSJT-X
I am having an issue with WSJT-X.
After hooking up my K3S to my computer and configuring it to use the sound
card it keep crashing the computer with a bug check 50 on usbaudio.sys.
Has anyone else seen this?
JT65HF HB9HQX seems to work just fine so
A blue sky den is always a driver issue. Change your hardware. 83 Tom
Sent from my Samsung Galaxy smartphone.
Original message From: Jerry Moore
Date: 2016-08-18 1:35 PM (GMT-05:00) To: 'Wayne Michael'
, elecraft@mailman.qth.net Subject: Re: [Elecraft] K3S
Jerry,
I did the basic trouble shooting.
I guess I forgot to mention that it works with JT65HF? Seems to be specific
to WSJT-X.Thanks for the tips.
Wayne AC9HP
> From: je...@carolinaheli.com
> To: wrmich...@hotmail.com; elecraft@mailman.qth.net
> Subject: RE: [Elecraft] K3S a
ated with the
cable from the K3S and the computer..
Hope this helps and gets you started.
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wayne
Michael
Sent: Thursday, August 18, 2016 1:03 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3S and
I am having an issue with WSJT-X.
After hooking up my K3S to my computer and configuring it to use the sound card
it keep crashing the computer with a bug check 50 on usbaudio.sys.
Has anyone else seen this?
JT65HF HB9HQX seems to work just fine so I am thinking it is not the hardware
but wond
On 1/25/2016 10:33 PM, Robert Nobis wrote:
> My issue, is that the PWR slider on WSJT-X is extremely sensitive,
That's why I leave it at 100%, turn down the "Device" level in Windows
Volume Mixer and adjust the K3/K3S Line In (Mic Gain) for the correct
four bar ALC level. The K3/K3S Line In lev
;>>> Thanks all for the helpful suggestions - turns out the audio drive levels
>>>>> are pretty sensitive. The WSJT Power slider on the right is very touchy
>>>>> in
>>>>> combination with the K3S Mic Gain knob. ALC can disappear in an instance!
>&g
On 1/25/2016 9:37 PM, James Bennett wrote:
I may be out in left field here, although I've been using WSJT-X for
> quite some time, but I keep the WSJT-X power slider at the max and
> control my output power at the K3
I've always: 1) left the PWR slider in WSJT-X at 100%
2) set
25, 2016 21:25
To: Robert Nobis
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3S and WSJT-X
Let me clarify a point. Use the PWR slider on WSJT-X to adjust the number
of bars on the ALC indication on the radio. Do this in
combination with the {MIC} Line Gain value on the radio. You sh
gt;>> combination with the K3S Mic Gain knob. ALC can disappear in an instance!
>>>> 73, Ian N8IK
>>>>
>>>>
>>>> -Original Message-
>>>> From: Don Wilhelm [mailto:w3...@embarqmail.com]
>>>> Sent: Monday,
ion with the K3S Mic Gain knob. ALC can disappear in an instance!
73, Ian N8IK
-Original Message-
From: Don Wilhelm [mailto:w3...@embarqmail.com]
Sent: Monday, January 25, 2016 17:52
To: Ian ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3S and WSJT-X
Ian,
Are you actually getti
ul suggestions - turns out the audio drive levels
>>> are pretty sensitive. The WSJT Power slider on the right is very touchy in
>>> combination with the K3S Mic Gain knob. ALC can disappear in an instance!
>>> 73, Ian N8IK
>>>
>>>
>>> --
stance!
73, Ian N8IK
-Original Message-
From: Don Wilhelm [mailto:w3...@embarqmail.com]
Sent: Monday, January 25, 2016 17:52
To: Ian ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3S and WSJT-X
Ian,
Are you actually getting RF output? Check with an in-line wattmeter.
WSJT-X is no different than
ge-
> From: Don Wilhelm [mailto:w3...@embarqmail.com]
> Sent: Monday, January 25, 2016 17:52
> To: Ian ; elecraft@mailman.qth.net
> Subject: Re: [Elecraft] K3S and WSJT-X
>
> Ian,
>
> Are you actually getting RF output? Check with an in-line wattmeter.
>
> WSJT-X
...@embarqmail.com]
Sent: Monday, January 25, 2016 17:52
To: Ian ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3S and WSJT-X
Ian,
Are you actually getting RF output? Check with an in-line wattmeter.
WSJT-X is no different than other soundcard data modes.
Do you have the DATA mode input set
Ian,
Are you actually getting RF output? Check with an in-line wattmeter.
WSJT-X is no different than other soundcard data modes.
Do you have the DATA mode input set to LINE IN? If you have a K3S or K3
with the KIO3B *and* are using the internal soundcard, anything plugged
into the LINE IN j
TXMON installed correctly! Works fb on CW and SSB.
-Original Message-
From: Don Wilhelm [mailto:w3...@embarqmail.com]
Sent: Monday, January 25, 2016 17:12
To: Ian ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3S and WSJT-X
Ian,
Do you have the coupler for the P3 Transmit Monitor
al Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bob
McGraw K4TAX
Sent: Monday, January 25, 2016 17:09
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3S and WSJT-X
I'll make screen shots if needed. Be sure you have CAT interface
working and then th
craft@mailman.qth.net
Subject: Re: [Elecraft] K3S and WSJT-X
Ian,
Which rev level of WSJT-X are you trying to use?
I seem to recall 1.5.x had some issues with Hamlib and as a result some of
the PTT code was broke.
If you are running 1.6.0 I think the Hamlib stuff is fixed and you can use
K3/KX3
K3S, 50w pwr but no envelope
> on the P3
>
>
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Tom
> Crayner
> Sent: Monday, January 25, 2016 16:19
> To: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] K3S and WSJT-X
&g
w pwr but no envelope
on the P3
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Tom
Crayner
Sent: Monday, January 25, 2016 16:19
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3S and WSJT-X
Ian,
Which rev level of WSJT-X are you trying t
WSJT-X 1.6.0, PTT method = CAT, VOX enabled on K3S, 50w pwr but no envelope
on the P3
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Tom
Crayner
Sent: Monday, January 25, 2016 16:19
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3S and
16:13
To: 'geoff allsup' ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3S and WSJT-X
Tnx Geoff - looks like I'm keying the K3S via CAT but no power out. Power
set to 50w and drawing 2.5 amps (vs 1.25 on RX) but no envelope on the P3.
73, Ian N8IK
-Original Message-
Ian,
Which rev level of WSJT-X are you trying to use?
I seem to recall 1.5.x had some issues with Hamlib and as a result some of
the PTT code was broke.
If you are running 1.6.0 I think the Hamlib stuff is fixed and you can use
K3/KX3 as a rig and then set PTT to CAT.
If you plan on running DX
nuary 25, 2016 11:59
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3S and WSJT-X
set PTT METHOD for CAT should do it
geoff - W1OH
On 1/25/16 11:52, Ian wrote:
> I have a single USB cable between the K3S and the laptop and no
> problem decoding JT65 signals with DATA A. "CAT
On Mon,1/25/2016 8:52 AM, Ian wrote:
Any hints on setting the "PTT Method" parameters?
I use VOX for all digital modes, including RTTY, JT65, JT9, FSK441,
ISCAT. Works great, even with an amp, because most rigs, including K3
have an internal delay after keying an amp and before TX begins. Tha
set PTT METHOD for CAT should do it
geoff - W1OH
On 1/25/16 11:52, Ian wrote:
I have a single USB cable between the K3S and the laptop and no problem
decoding JT65 signals with DATA A. "CAT Control" is set for COM4 and
38400-N-8-1. Any hints on setting the "PTT Method" parameters?
73, I
I have a single USB cable between the K3S and the laptop and no problem
decoding JT65 signals with DATA A. "CAT Control" is set for COM4 and
38400-N-8-1. Any hints on setting the "PTT Method" parameters?
73, Ian N8IK
s/n 10111
__
35 matches
Mail list logo
