Essentially impossible on my K3S. I could never get my head around HRD (even
when it was free) so I can't speak to that. But with MMTTY I have my Windows
slider at 20% and the Mic/Line Level control is still so sensitive that a change
from 6 to 7 takes the ALC from 3 to 5 bars. These low
...@mailman.qth.net] On Behalf Of Steve
Muenich
Sent: Monday, August 31, 2015 11:45 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3S trouble doing PSK31 w DM780
Hi all,
It's my first time posting to this group as I recently got my K3S #10121 on
the air. I have been really enjoying playing
Steve,
Make sure there is nothing plugged into Line In on the rear panel. If
a cable is plugged in there, the USB codec is bypassed in favor of
Line In for your TX audio source.
73,
matt
W6NIA
On Mon, 31 Aug 2015 22:44:32 -0500, you wrote:
>Hi all,
>
>It's my first time posting to this group
Just checked my system with HRD/DM780.
Radio MODE set for TX Data.
MENU for MIC SEL set for Line In and value about 10 to 20.
Set computer SPEAKERS value for about 20 to 30.
Be sure correct CODEC is selected in DM-780.
Adjust slider on HRD/DM780 Soundcard for about 4 bars of ALC on radio.
Are you getting any power output at all? Switch the meter from ALC to
power output and see if you have anything. I had a similar problem and
ended up using USB mode, but then I had to change the CONFIG to select the
rear panel line in (I use the signal link USB through line-in and
line-out.) I
Steve,
Make sure the data sub-mode is DATA A.
Do you have anything connected to the Line In jack?
The USB audio in is disabled if there is a plug in the Line In jack.
Adjust the slider on the computer soundcard control to about 2/3 of full
and then adjust the K3S Line In (Mic gain used in
Hi all,
It's my first time posting to this group as I recently got my K3S #10121 on the
air. I have been really enjoying playing with it on SSB and CW.
I use HRD as my logging and rig control. But over the last couple of nights I
have been trying to get on the digital modes, mostly PSK31 at
7 matches
Mail list logo