, but if it's
advertised that it can sit on the RS-232 bus then it should work there. If
not,
remove all references to RS-232, other than firmware installation.
Wes
--- On Fri, 6/28/13, Don Wilhelm w3...@embarqmail.com wrote:
From: Don Wilhelm w3...@embarqmail.com
Subject: Re: [Elecraft] KRC2
shows ACC OFF or ACC1-6, with ACC3, 4, 5 and 6 all
mapping to ACC3.
In conclusion, this could be so much simpler with more clarity in the
documentation.
Wes N7WS
--- On Fri, 6/28/13, Don Wilhelm w3...@embarqmail.com wrote:
From: Don Wilhelm w3...@embarqmail.com
Subject: Re: [Elecraft] KRC2
Wilhelm w3...@embarqmail.com
Subject: Re: [Elecraft] KRC2 issues
To: Wes Stewart n...@yahoo.com
Cc: elecraft@mailman.qth.net
Date: Friday, June 28, 2013, 4:56 PM
Wes,
That is the KRC2 Configuration Utility which is quite
different than the
firmware. It is used to alter the band output
selections
on the RS-232 bus then it should work there. If
not,
remove all references to RS-232, other than firmware installation.
Wes
--- On Fri, 6/28/13, Don Wilhelm w3...@embarqmail.com wrote:
From: Don Wilhelm w3...@embarqmail.com
Subject: Re: [Elecraft] KRC2 issues
To: Wes Stewart n...@yahoo.com
Someone else once called the KRC2 his least favorite piece of Elecraft
equipment. I would like to concur with that assessment.
I have one of these, purchased used some years ago. At that time I was
attempting to use it with my TS-870 and despite some handholding and a
special hex file sent
Wes,
I just checked the Elecraft website, and see only 3 files for the KRC2 -
KRC2 Download Program, KRC2 Firmware V1.6 and KRC2ACC Firmware V1.6. No
older levels and no beta.
The F buttons behave differently in the KRC2ACC firmware, so if you want
band selection via those buttons as
w3...@embarqmail.com
Subject: Re: [Elecraft] KRC2 issues
To: Wes Stewart n...@yahoo.com
Cc: elecraft@mailman.qth.net
Date: Friday, June 28, 2013, 3:43 PM
Wes,
I just checked the Elecraft website, and see only 3 files
for the KRC2 -
KRC2 Download Program, KRC2 Firmware V1.6 and KRC2ACC
there. If not, remove
all references to RS-232, other than firmware installation.
Wes
--- On Fri, 6/28/13, Don Wilhelm w3...@embarqmail.com wrote:
From: Don Wilhelm w3...@embarqmail.com
Subject: Re: [Elecraft] KRC2 issues
To: Wes Stewart n...@yahoo.com
Cc: elecraft@mailman.qth.net
Date: Friday, June 28
8 matches
Mail list logo