Hi David,
Fred Cady is correct, the next version of P3 firmware will allow P3/SVGA USB
keyboard macros to include P3 commands. It will also allow the first 8
P3/SVGA keyboard macros to be mapped to front panel function keys.
Kind regards,
Paul
--
View this message in context:
Thank you sir!!!
On Mon, 2016-01-25 at 10:29 -0700, Paul Saffren N6HZ wrote:
> Hi David,
>
> Fred Cady is correct, the next version of P3 firmware will allow
> P3/SVGA USB
> keyboard macros to include P3 commands. It will also allow the
> first 8
> P3/SVGA keyboard macros to be mapped to
I just heard from Genovation-- the 24 Key software for the CP24 pad is
finished, and I will be testing it shortly. As soon as it is tested,
it will be available for download.
That will put both the CP48, and the CP24 Genovation keypads as being
able to send macros to the K3, via the P3, and
Ideally, the guys at Elecraft will make it so we don't need a P3 to do this.
On 1/25/2016 3:51 PM, Dave Cole wrote:
I just heard from Genovation-- the 24 Key software for the CP24 pad is
finished, and I will be testing it shortly. As soon as it is tested,
it will be available for download.
Just wondering what the programming method is and if it is possible from a Mac?
73 de David, M0XDF (K3 #174, P3 #108)
> On 25 Jan 2016, at 22:51, Dave Cole wrote:
>
> I just heard from Genovation-- the 24 Key software for the CP24 pad is
> finished, and I will be testing it
The Pigknob goes direct to the K3 (serial port) and uses the programming
from the reference. Great gadget: 2-speed VFO and eight buttons you can
tell to do whatever you need. No need for K3 modifications. Been using
mine for a couple of years.
Bill W2BLC K-Line
@mailman.qth.net
Subject: Re: [Elecraft] P3 Macro question
The Pigknob goes direct to the K3 (serial port) and uses the programming
from the reference. Great gadget: 2-speed VFO and eight buttons you can tell
to do whatever you need. No need for K3 modifications. Been using mine for a
couple of years
Hello group mind,
I have a P3 control question for you all...
It appears to me, that the P3 does not accept macros for itself, via the
trigger launch process which fires off macros to the K3.
Is this assumption on my part correct?
If so, is there a way to trigger the P3 to accept a macro
net> on behalf of David Cole
<d...@nk7z.net>
Sent: Sunday, January 24, 2016 10:14 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] P3 Macro question
Hello group mind,
I have a P3 control question for you all...
It appears to me, that the P3 does not accept macros for itself, via the
tr
With this facility, I would consider using a micro controller to implement two
functions:
P3 for split mode: Read VFOs A and B. Set center and span so A
and B VFOs are on opposite sides of the display. To use, tune
in the DX on A and put B just above the pileup. Press the
button.
P3
t; Fred KE7X
>
> For all KE7X Elecraft books, see www.ke7x.com
>
>
>
>
> From: Elecraft <elecraft-boun...@mailman.qth.net> on behalf of David Cole
> <d...@nk7z.net>
> Sent: Sunday, January 24, 2016 10:14 AM
> To: e
That is exactly what I am attempting to do here, Hence my question as to
why I am unable to get the P3 to take a macro via the USB port... I
want it on the Genovation keypad, not the P3 case.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support
Hi Alan,
My original posting had two parts. I suspect you answered the question posed
in the first paragraph. Do you have any comment on my findings in the second
paragraph.
Here is the scenario. I have K3 macros set up for different CW splits. They
turn on the Sub RX, copy parameters, turn on
I can actuate a P3 macro from within the P3 Utility. But I don't see a way to
attach the macro to one of the function keys. Is that coming?
I added a P3 command to the tail end of an existing K3 macro using the K3
Utility. It worked properly from within the K3 Utility. I then wrote that
macro to
I asked the same question. I also wanted to to send K3 macros from P3 buttons!
I believe
that these features are 'on the list' for future development.
On 4/24/2011 2:05 AM, Mike K2MK wrote:
I can actuate a P3 macro from within the P3 Utility. But I don't see a way to
attach the macro to one
Yes, on the list.
Alan N1AL
On Sun, 2011-04-24 at 08:31 -0700, Vic K2VCO wrote:
I asked the same question. I also wanted to to send K3 macros from P3
buttons! I believe
that these features are 'on the list' for future development.
On 4/24/2011 2:05 AM, Mike K2MK wrote:
I can actuate a
16 matches
Mail list logo