[Elecraft] PX3

I am curious as to everyone's opinion on the PX3? Is it worth the money or is it better to hook the kx3 to a computer? Dwayne Rich NC4EM Dwayne __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http:

[Elecraft] PX3

I sold my FT 817 to add the PX3 to my KX3. I had never used a spectrum display before. But I never turn on the KX3 without the PX3 now. It is useful to see CW signals both sides of the dial, and which is the strongest, and the weakest. Same for SSB. Just turn the dial and move the station to the

[Elecraft] PX3

I admit to not having the quietest of locations, but when I'm listening on 6-meter CW or SSB with the KX3, my ears cannot tell if the PX3 is on or off. 73 Ray W2RS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinf

[Elecraft] PX3

I just purchased a PX3 and want to mount it above my KX3 I was thinking of using one of those holders for mounting your phone/GPS in your car ( the gooseneck variety) has any one tried this? is the thickness of the PX3 a problem? Thank you. R Thorpe K6CG

[Elecraft] PX3

Are there any plans to have the PX3 project its screen to a computer? Thanks W7JJL __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailma

[Elecraft] PX3

Will it support both 0 ans 8 kHz "IF"? Thanks, Olli -- Contest, DX & radio projects: http://www.dh8bqa.de __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: m

[Elecraft] PX3

A mini P3. I was hoping for a station monitor to show things going out. The P3/PX3 can show us things our ears can hear, a station monitor could show us things we cannot hear. Maybe in the future. K6CG __ Elecraft mailing list Home: ht

[Elecraft] PX3

When is the PX3 going to be available for shipping? You mentioned several software-firmware updates for the PX3 that are planned. What is the general schedule for each of these updates after initial product shipment? When is the manual for the PX3 going to be available? 73 Allen Patterson, KC7S

[Elecraft] PX3

Any hope of a P3 (no bells and whistles) with the PX3 form factor? 73 de Brian/K3KO - No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.2247 / Virus Database: 3722/6804 - Release Date: 04/05/14 __ Elecra

[Elecraft] PX3

Any PX3 delivery rumors? It's the end of july. John N1JM - 73, John N1JM K3 #5986 P3 #1752 KPA500 #596 KX3 #926 XG3 XG1 -- View this message in context: http://elecraft.365791.n2.nabble.com/PX3-tp7591792.html Sent from the Elecraft mailing list archive at Nabble.com.

[Elecraft] PX3?

Anyone received PX3 yet? - 73, John N1JM K3 #5986 P3 #1752 KPA500 #596 KX3 #926 XG3 XG1 -- View this message in context: http://elecraft.365791.n2.nabble.com/PX3-tp7592236.html Sent from the Elecraft mailing list archive at Nabble.com. __

[Elecraft] PX3

Its mid August does anyone have their PX3 out there? if so any feedback? Thanks. K6CG __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.q

[Elecraft] PX3

Thanks Wayne for the new PX3 FAQ's when might we see the PX3 in our shacks I would say the middle of August has passed by. K6CG __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/

[Elecraft] PX3

Has anyone got their PX3 shipping notice yet? K6CG/VE1 Nova Scotia Canada __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This l

[Elecraft] PX3

Kit-build went smoothly, except for a brain fart on my part. This is a real cute little box, and will be even nicer when all the firmware is done. One very important thing missing is Fixed Tune Mode. 73, Jim K9YC __ Elecraft mailing li

[Elecraft] PX3 SOLD!

Thanks - That was quick! Pete WK8S __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Pleas

[Elecraft] PX3 request

Would it be possible to stop the PX3 from freezing when the RIT control is adjusted please? The VFO can be moved without this happening, so why not the RIT? Many thanks. 73 David Anderson GM4JJJ __ Elecraft mailing list Home: http:/

[Elecraft] PX3 question

I have a KX3 and a PX3. The KX3 has all the options including the KX3-2M 2 meter transverter. I have not used the transverter a lot because I have been preoccupied using the KX3 on HF. Anyway, when I began using the PX3, I swear that it displayed the signals received on 2 meters, but now it do

[Elecraft] PX3 Question

I recently built a PX3 and was going through some of the learning process. I was changing FixTrack and FixMode settings and I am not sure what I did, but in either FixTrack setting, the signals seemed to converge from both directions to the cursor, and when they did, I was tuned to a CW signal. Wha

Re: [Elecraft] PX3

Prior to the release of the PX3 I used a computer. Since I got the PX3 I no longer use the computer for anything but logging. It's integration with the KX3 allows it to do many more things than the computer could. After the upgrade to add keyboard functionality, it is even better. You can do PS

Re: [Elecraft] PX3

Well worth the money, IMO, Dwayne. It's a class product and very well integrates with the KX3. Only downside: Using the KX3 sans PX3, say for portable ops, now feels cumbersome :-) 73, Phil W7OX On 5/2/16 4:28 PM, dwayne rich wrote: I am curious as to everyone's opinion on the PX3? Is it wo

Re: [Elecraft] PX3

Absolutely one of the best radio purchase I have made. As others have noted the PX3 integrated really well with the KX3. Makes operation really smooth and eliminates the need for a PC. You will not regret it. Enjoy David KG6MTI Sent from my iPhone > On May 2, 2016, at 17:28, dwayne rich w

Re: [Elecraft] PX3

I'm not sure it's a question of PX3+KX3 OR computer+KX3. A computer can still be connected to the KX3 (via the PX3) for use with logging / control programs. Elecraft needs to update the PX3 datasheet. The PX3 is now much more than just a panadapter. In addition to the spectrum and waterfall d

Re: [Elecraft] PX3

Dwayne, Prior to the PX3 coming on the market, I used my KX3 with a software application called NaP3. Was nice having a huge display available (I use a 27" iMac) and the ability to mouse click on a signal at the opposite end of the band and instantly QSY there. But. After having the PX3 I n

Re: [Elecraft] PX3

On Mon,5/2/2016 4:28 PM, dwayne rich wrote: I am curious as to everyone's opinion on the PX3? Is it worth the money or is it better to hook the kx3 to a computer? I bought a PX3. Much smaller and lighter, integrates nicely. 73, Jim K9YC

Re: [Elecraft] PX3

The PX3 also provides a generous amount of display height for its spectral and waterfall displays (roughly 2x the height of the IC-7300 in its max setting, to use the vernacular :) Wayne On May 3, 2016, at 6:14 AM, James Griffith wrote: > I sold my FT 817 to add the PX3 to my KX3. I had neve

Re: [Elecraft] PX3

Honestly, the size of the spectral display isn't as important as the fact that it is extremely effective. It works. It's all in one small box. The K3/K3s - P3 and KX3/PX3 are wonderful bits of technology. But their U/I's remain a fine examples of the best of 20th century design. Large, ful

Re: [Elecraft] PX3

my K3s. I CAN find radios with the same or even better , however, I've not found a package as capable.. Jer -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Doug Person via Elecraft Sent: Tuesday, May 03, 2016 2:43 PM To: elecraft@mailman.

Re: [Elecraft] PX3

Come on guys. Can we stop the “mine is bigger than yours” because my-display-is-better because I-have-a-finger wars here? Really??? You want to deal with Icom? Buy one. I’ve owned several of them over the last 20 years. They’re just peachy, although some are less/more peachy than others.

Re: [Elecraft] PX3

Please read my last posting. Its -strongly- outside of list guidelines to make postings of the type below telling people what they should, or should not, be posting. Eric Moderator, really! /elecraft.com/ On 5/3/2016 12:39 PM, GRANT YOUNGMAN wrote: Come on guys. Can we stop the “mine is bigg

[Elecraft] PX3 Stand

I bought the SOTAbeams low rider stand for my KX3 and when I got the PX3 I inquired with Richard G3CWI if one would become available. I ended up sending him measurements and he is now offering the stand. Matches the KX3 stand perfectly. Thought I would mention this if anyone is interested. Here'

Re: [Elecraft] PX3

Richard, look at my mounting solution at GEMS Home Page  I have both KX3 mounts and PX3 mounts coming out in the next few weeks. Scott AK6Q |   | |   | |   |   |   |   |   | | GEMS Home PageHOME click on an image to enlarge Installation Videos: LA8FTA KK4NQQ Links: Eham Reviews Elecraft KXLine

Re: [Elecraft] PX3

Richard - I have nothing to do with GEM Products, and don't even own a KX3... but at Dayton, I saw the mounts that Scott has designed for the KX3 & PX3. There is NO doubt in my mind that if I had those sweet little Elecraft products, and wanted to mount them, the GEM Products devices are what I w

[Elecraft] PX3 Anomaly

Finally got the KX3 – PX3 – KXPA100 system cabled together and on the air today, all of the F/W updated. All OK but for two anomalies, one of them a bit of a nuisance. The PX3 shows a double sharp spike offset from the tuned frequency about 600 and 700 Hz (an eyeball estimate), at about S2.

[Elecraft] PX3 Problem

08:37:37 -0700 >From: Alan >To: elecraft@mailman.qth.net >Subject: Re: [Elecraft] PX3 problem >Message-ID: <55819441.8050...@sonic.net> >Content-Type: text/plain; charset=windows-1252; format=flowe >I think you must be referring to the notch that occurs at the KX3 VFO &

[Elecraft] PX3 Question

I just purchased a PX3 for my KX3 and KPA100 for my cottage in Canada. I connected it as per instructions and it works well. I have one issue, when I change bands on the KX3 the display on the PX3 flickers when the band is tuned. The only way to stop the flickering is to cycle the PX3 off th

[Elecraft] PX3 display

Howdy Gang. Recently picked up a nice PX3 to use with my KX3 and have been playing with the menu options but can’t seem to find the one I want. I’d like to make the upper frequency portion of the display full screen….I don’t need the bottom waterfall. Is this possible? Seems like largest scre

[Elecraft] PX3 problems

I think these problems are chronic, and have been occurring off and on for at least a year. (I've been ignoring them because for most of the time I use my K3 and P3, or I'm operating FT8 and the PX3 doesn't matter. Also, I'm lazy.) Vertical smearing. It acts as if once a signal is displayed on

[Elecraft] PX3 Issues

blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px #715FFA solid !important; padding-left:1ex !important; background-color:white !important; } I am having issues with my PX3 #1091.  The select knob has stopped working.  I took it apart and rebuilt  it, reloaded the softwa

Re: [Elecraft] PX3

Use the I/Q output to soundcard and sdr software. . Sent from my iPhone ...nr4c. bill > On Apr 22, 2017, at 12:21 AM, John Lally wrote: > > Are there any plans to have the PX3 project its screen to a computer? > > > > Thanks > > > > W7JJL > > ___

[Elecraft] PX3 Problem?

I have had my PX3 for a little over a year (I think). It has been used sparingly. Until this afternoon, it has worked perfectly. Now I see a spike in the center of the display and periodic spikes across the entire screen. Almost all are symmetrical in frequency and amplitude about the center

[Elecraft] PX3 reset....

Greetings, Apparently I can't read owner manuals correctly.  I'm trying to reset my PX3 to factory specs and I don't seem to be accomplishing that. I'm probably missing something, but could somebody tell me what I need to do. (I need to do this because I've hopeless messed up the display an

[Elecraft] PX3 Lag

I recently got a KXPA100. Ever since I hooked it up I noticed that the PX3 marker no longer moves "smooth." It will move across the screen smooth for a bit, lag behind in frequency, then jump to where it should be and then continue. I thought it was a fluke at first but it does it quite constantly.

[Elecraft] PX3 available ??

Is anyone selling a PX3? If the price is right I am in the market for a used -- no -- scratch that, I am the market for a previously owned PX3 in pristine condition. Please contact off of the Elecraft reflector. 73, phil, K7PEH __ E

[Elecraft] PX3 Anomaly?

Hi, I have recently purchased a new PX3 for use with my KX3.In CW mode in the waterfall display there appears a distinct black line 600hz to the right of the carrier, the black line is 50hz wide.Is this normal or is there a fault with the PX3 or is there something I have not done in setting uppr

[Elecraft] PX3 Keyboards

Does anyone know if the Logitech K380 keyboard works with the PX3. Can not find a current list on the Elecraft site. John K7JLT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/

[Elecraft] PX3 sold

PX3 has been sold. Thanks for the inquiries. Todd, WA7U __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: h

[Elecraft] [PX3] Waterfall

Dear Elecrafters, I intend to buy a PX3. But I still have a few technical questions. The manual says "[DISP] toggles between the spectrum, and combination spectrum/waterfall display modes." Is it possible to increase the height of the waterfall to 100%, so the spectrum height is zero? If t

[Elecraft] PX3 question

I am running a KX3-PX3 set; on the PX3 set for the spectrum in top, waterfall on bottom, I note the following oddity: The right side of the spectrum display has a green tint to it. What's up with that? Is it normal; anyone else see it? Thanks & 73 de Dave, W5SV _

Re: [Elecraft] PX3

On Apr 4, 2014, at 2:46 PM, Oliver Dröse wrote: > > Will it support both 0 ans 8 kHz "IF"? Yes, and it will automatically re-center the display based on the shift selection, mode, filter bandwidth, etc. 73, Wayne N6KR __ Elecraft

Re: [Elecraft] PX3

Richard I suspect your not alone. The sensor connection on the P3 has been sitting unused since day one and should have been on the top of the list for awhile i would have thought but nothing has been announced yet. I have requested numerous times for info but not got a reply. Gary Vk1ZZ K3, KX3

Re: [Elecraft] PX3

So that sounds like it can be used with the 1st IF of the K3. Having both radios that makes the PX3 even more attractive. Size is really nice for portable operating with KX3. And feed thru of computer control of KX3, nice! Guess we need to add to the piggy bank for one! 73, Ed On Apr 4, 2

Re: [Elecraft] PX3

Ed, In my current ignorance, I don't know if the PX3 has an RF input. The literature says it uses the RX I/Q as input - which means it will not handle the 8 MHz IF output of the K3. It may be possible if one feeds the K3 IF output to an SDR device (Softrock RX, LP-Pan, SDR-IQ, etc) which does

Re: [Elecraft] PX3

Hi Don and All, Wayne already answered this question. The PX3 is designed to accept the KX3's I/Q outputs and will not work with the K3's IF output. I belive Wayne anticipated this type of quesion and posted a note specifically to answer it. 73, matt W6NIA On Sat, 05 Apr 2014 15:17:00 -0400,

Re: [Elecraft] PX3

Hmm. I don't think it uses any IF, I read it as I/Q (audio spectrum) with ability to show frequency adjusted for "offset". Sent from my iPhone ...nr4c. bill > On Apr 5, 2014, at 2:56 PM, Edward R Cole wrote: > > So that sounds like it can be used with the 1st IF of the K3. Having both > ra

Re: [Elecraft] PX3

Read the data sheet. "The PX3 uses the KX3’s baseband RX I/Q signals. It is not compatible with the 8.2-MHz I.F. signal from the K3." http://www.elecraft.com/manual/PX3%20Data%20Sheet%20rev%20B1a.pdf wunder K6WRU On Apr 5, 2014, at 1:56 PM, Edward R Cole wrote: > So that sounds like it can b

Re: [Elecraft] PX3

l. > > 73, > Barry > K3NDM > > > > On 4/5/2014 1:07 PM, Uwe Hermanns wrote: >> Hi, >> >> is the frequency responce of the KX3-IQ really flat over 250 kHz? >> >> 73 de Uwe, DL4AC >> -- Weitergeleitete Nachricht ------ >>

Re: [Elecraft] PX3

Hi Ed, no, just baseband audio. Maybe you mixed up kHz and MHz when I was asking for 8 kHz? That's not the 8.215 MHz IF of the K3. ;-) 73, Olli Contest, DX & radio projects: http://www.dh8bqa.de Am 05.04.2014 20:56, schrieb Edward R Cole: So that sounds like it can be used with the 1st IF

Re: [Elecraft] PX3

atum: 05.04.2014 19:03 Betreff: [Elecraft] PX3 An: "Elecraft@mailman.qth.net" Cc: When is the PX3 going to be available for shipping? You mentioned several software-firmware updates for the PX3 that are planned. What is the general schedule for each of these updates after initial product shipme

Re: [Elecraft] PX3

gt;>> fact, there are some words about this in the KX3 manual. >>> >>> 73, >>> Barry >>> K3NDM >>> >>> >>> >>> On 4/5/2014 1:07 PM, Uwe Hermanns wrote: >>>> Hi, >>>> >>>> is the fre

Re: [Elecraft] PX3

On 4/5/2014 1:07 PM, Uwe Hermanns wrote: Hi, is the frequency responce of the KX3-IQ really flat over 250 kHz? 73 de Uwe, DL4AC -- Weitergeleitete Nachricht -- Von: "Allen Patterson" Datum: 05.04.2014 19:03 Betreff: [Elecraft] PX3 An: "Elecraft@mailman.qth.net&quo

Re: [Elecraft] PX3

, DL4AC -- Weitergeleitete Nachricht -- Von: "Allen Patterson" Datum: 05.04.2014 19:03 Betreff: [Elecraft] PX3 An: "Elecraft@mailman.qth.net" Cc: When is the PX3 going to be available for shipping? You mentioned several software-firmware updates for the PX3 that are plann

[Elecraft] PX3 Schedule

When is the PX3 going to be available for shipping? You mentioned several software-firmware updates for the PX3 that are planned. What is the general schedule for each of these updates after initial product shipment? When is the manual for the PX3 going to be ava

Re: [Elecraft] PX3

ments might be a consideration, but I suspect that is OK since the KX3 is designed with that in mind. My thought was how there might be an incentive to get the PX3 if one had both radios. 73, Ed - KL7UW -- From: Don Wilhelm To: elecraft@mailman.qth.net Subject: Re: [Elecraft] PX3 Messa

[Elecraft] PX3 cables ?

Many have ordered PX3. It might be interesting to know, if a set of cables are included or available as option. I would like to have them delivered with PX3. A set might be as: - 15 ft battery cable - 12 inch 3,5mm male right angle to 3,5mm male right angle stereo - 12 inch 2,5mm male right angle

[Elecraft] PX3 cables ?

Correction: - 5 ft battery cable (not 15, sorry) Benny OH9NB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted

[Elecraft] PX3 SHIPPING?

Any update on the PX3 shipping dates? the website as June 16th as its last refresh on shipping dates. Thanks to all. K6CG/VE1 for the summer __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://m

Re: [Elecraft] PX3?

Wayne posted this two days ago, in reply to a message at the KX3 Yahoo group re "PX3 Ship Status": We've delivered a number of field-test units, and the FTs are apparently having lots of fun while helping us clean up some final firmware issues. We'll update status again next week. 73, Wayne

[Elecraft] PX3 Anyone?

Anyone received notice of shipment outside of Field Testers? John N1JM - 73, John N1JM K3 #5986 P3 #1752 KPA500 #596 KX3 #926 XG3 XG1 -- View this message in context: http://elecraft.365791.n2.nabble.com/PX3-Anyone-tp7592533.html Sent from the Elecraft mailing list archive at Nabble.com.

Re: [Elecraft] PX3

They have updated their shipping status page to late this week or early next week. 73, John N1JM - 73, John N1JM K3 #5986 P3 #1752 KPA500 #596 KX3 #926 XG3 XG1 -- View this message in context: http://elecraft.365791.n2.nabble.com/PX3-tp7592728p7592773.html Sent from the Elecraft mailing

Re: [Elecraft] PX3?

Yes, PX3s have started shipping. Be sure to use KX3 firmware rev. 2.19 or later (the latest beta release, soon to go to production status). 73, Wayne N6KR "rmoo...@bellsouth.net [KX3]" wrote: > Can we hope for shipping soon? __

[Elecraft] PX3, WOW

I really like the PX3, but one word of caution. Read carefully in the manual where it says to plug in the cables FULLY! Especially to I/Q cable. If you don't, you will get no "Opposite Band Nulling". Tried to do the procedure and no reaction to either control. Pressed again on the I/Q plug and

[Elecraft] PX3 Questions

I just received the PX3 kit. It was rather straight forward to assemble and to set up. I am learning how to operate the PX3. I have two questions. 1. Configuring the power switch, page 22. Pins 2 & 3: "The PX3 turns on automatically when power is applied and may be turned off and

[Elecraft] PX3 & Pigknob

Just finished the PX3 (kit) and it works like a charm. Now comes the question. I had a Pigknob attached to the “Acc 1” port. Now the Acc1 port is connected between the KX3 & PX3. Can I “Y” the connection into the PX3, (From KX3 & Pigknob), or some other way. If I had to chose, of course it’

Re: [Elecraft] PX3

I noticed that in the FAQ, Jim. I sure hope it can be implemented since that's the only way I use my P3 and am holding off on the PX3 for that reason. I'm concerned that the FAQ has an "if" in it re this mode: " If this feature is added at a future date, it may have somewhat different performa

Re: [Elecraft] PX3

On 10/21/2014 8:39 PM, Phil Wheeler wrote: I noticed that in the FAQ, Jim. I sure hope it can be implemented since that's the only way I use my P3 and am holding off on the PX3 for that reason. I'm concerned that the FAQ has an "if" in it re this mode: " If this feature is added at a future dat

[Elecraft] PX3 Impressions

*Received the PX3 on the 9th ~ assembly was straight forward with a little assistance from tech-support**. OOPS, I placed the bezel on the wrong-side of the front panel = end-plate doesn't fit well that way. :-) */Impressions: Assembly was easy, makes for an octopus hookup with all the interface

[Elecraft] PX3 Error

Hello I got my PX3-K lastt night. Went together in about 45 minutes. Easy-peasy. I am getting the error "Invalid Saved State Data. Using Default Values" As you might guess, I have to set up the PX3 the way I want it every time I power-cycle the thing. It shipped with the latest firmware, etc. s

[Elecraft] PX3 power

Hi all, Just a quick note as requested that new stock of the KX3 & PX3 DC Power Splitter is in at: http://www.proaudioeng.com Howie - WA4PSC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http:/

[Elecraft] PX3 Question

I'm just a click away from ordering a PX3, and I've perused the FAQs and online manual but still have a question that some PX3 owner on this list should be able to answer for me: How far away from (and to the left of) the KX3 can I place the PX3? I didn't see any cable lengths given, just a

[Elecraft] PX3 question

Stan, If you position the PX3 to the left of the KX3, the two units can be positioned within 0.5" of each other when using all right-angle plugs, which makes the combined chassis width 13.5". We make a #33-100 KX3 & PX3 DC Power Splitter which helps facilitate neat cable management for users

Re: [Elecraft] PX3 request

Hi David, Thank you for finding this bug! I just fixed it and it will be available in the next release. Kind regards, Paul -- View this message in context: http://elecraft.365791.n2.nabble.com/PX3-request-tp7608806p7608808.html Sent from the Elecraft mailing list archive at Nabble.co

Re: [Elecraft] PX3 request

Paul, Wow! Many thanks, I didn't realise it was simply an oversight, and not some basic limitation in the way the hardware worked. If you would like me to beta test the new version I would be happy to do so, especially as we have good auroral conditions just now and that is where I use RIT a

[Elecraft] PX3 and CW

It's fun using the CW with the KX3 and the PX3 via the KX3 Utility but since the recent PX3 firmware upgrade there appears to be an /*upper limit*/ to "good decoding" ~ like at above 30 wpm ~ Has anyone else noticed this? I don't recall this being an issue before I updated the firmware. It

[Elecraft] PX3 keyboard locking

Today I gave the new PX3 1.35 beta a test in the JARTS RTTY contest. Although my vanilla USB keyboard works ok, the transmit buffer would lock after the first transmission. I discovered that this was caused by beginning a second transmission before the transmitted text appears at the upper part

[Elecraft] PX3 with keyboard

Just got a new PX3 kit and assembled it last night. What a great addition to the KX3 station; thanks Elecraft. I have been seeing the posts about a keyboard and downloaded and installed the Beta firmware into the PX3. I had a wired Logitech K120 keyboard and plugged it into the PX3 and now I see a

[Elecraft] [PX3] OT - WTB

Looking to buy a PX3. Must be in great condition and from a non-smoking home. Please send pictures and price to: joelbbl...@gmail.com Thanks, Joel - W4JBB __ Elecraft mailing list Home: http://mailman

[Elecraft] [PX3] Carrier Null

I recently acquired a used PX3 and am quite pleased with it. I am, however, having a difficult time with the carrier null procedure. If memory serves, I had a problem trying to do the carrier null on an SDR I built five or six years ago too. I never could quite get the signal generator in the P

[Elecraft] PX3 Amplitude calibration

With the same Span settings, my PX3 consistently indicates signal and noise floor levels about 10 dBm higher than my P3 (or a number of other panadapters on SDR radios). I've looked through the manual, and see that there is an amplitude calibration for transverters using MENU:XV Gain. However, I s

[Elecraft] PX3 Future Upgrades?

I'm loving my PX3. It adds so much to the KX3 operation that I hate to be without it when I take my KX3 portable while backpacking and hiking. Wayne, Don or other Elecraft guys - can you comment on when we might see the SVGA interface upgrade and the USB keyboard supported. Also, any hope for US

[Elecraft] PX3 Display Problem

My PX3 was operating normally until I opened the case to change the power-on jumper. The display now has vertical lines about every 12 KHz even when completely unplugged from the KX3 and operating on batteries. Any ideas? John K7JLT __

Re: [Elecraft] PX3 Anomaly

Make sure those (all!) cables are fully inserted, Ted. I've found that to take more "push" in the case of the KX3 and PX3 than some of my other devices. Phil W7OX On 6/13/15 4:39 PM, Dauer, Edward wrote: Finally got the KX3 – PX3 – KXPA100 system cabled together and on the air today, all of t

Re: [Elecraft] PX3 Anomaly

Both of these problems have been reported here. The second problem is better but still exists. On the first with the blip that is offset I use the workaround of operating CW with a reverse offset until they get it fixed. At least there isn't any off set used on field day. John K7JLT Phil Wh

Re: [Elecraft] PX3 Anomaly

For the KXPA100 issue (PA MODE ON to OFF), just leave the KXPA100 powered on full-time. This works in my mobile installation, meaning the KXPA100 is always available. This is not true if the KX3 is removed, when PA MODE will default OFF because of the missing KXPA100. My mobile installation has a

Re: [Elecraft] PX3 problem

I have not heard anything from Elecraft about this problem. John K7JLT "Dauer, Edward" wrote: >Just saw your posts in the archives. I am experiencing the same, except that >in my case there are two narrow S2 spikes at either end of the empty gap. Has >anyone at the factory ever commented or

Re: [Elecraft] PX3 problem

I think you must be referring to the notch that occurs at the KX3 VFO frequency. The I/Q output of the KX3 is AC-coupled so there is no response at zero HZ, which corresponds to the KX3 VFO frequency. In CW mode, this is offset from the receive frequency by the CW pitch, typically 600 Hz, eit

Re: [Elecraft] PX3 Problem

PX3 exhibits narrow S2+ spikes on either side of the notch. Any ideas about that? I have not seen it mentioned in the archives. Ted, KN1CBR Message: 3 Date: Wed, 17 Jun 2015 08:37:37 -0700 From: Alan To: elecraft@mailman.qth.net Subject: Re: [Elecraft] PX3 problem Message-ID: <55819441.8

Re: [Elecraft] PX3 display

Did you try the "Disp" button on the top right of the PX3? On Tue, Feb 5, 2019 at 9:45 AM Joseph Trombino, Jr wrote: > Howdy Gang. > > Recently picked up a nice PX3 to use with my KX3 and have been playing > with the menu options but can’t seem to find the one I want. > > I’d like to make the up

Re: [Elecraft] PX3 display

Tap the the "Display / Average" button in the upper right corner of the PX3 73, Dale - WA8SRA On Tue, Feb 5, 2019 at 9:45 AM Joseph Trombino, Jr wrote: > Howdy Gang. > > Recently picked up a nice PX3 to use with my KX3 and have been playing > with the menu options but can’t seem to find the on

Re: [Elecraft] PX3 display

Thought I found the correct adjustment by going to MENU item “Height of waterfall display”. I got the full screen I wanted…but after I turned the KX3 on the large full screen changed to about half size. Tried gain several times without success…I can’t seem to replicate the full screen I want.

  1   2   3   4   5   6   7   >