I have ordered a Signaink USB for use with my K3, primarily for PSK31 and
JT65A operation, and expect delivery on Monday.
Does anyone have any precautions or hints on proper setup of the Signalink
for use with the K3? I use Windows 7 running on a Mac under VMWare Fusion.
73,
Bob - N7RJN
hope you bought the SignaLink™ USB with cable for the Elecraft K3's rear
panel Line In/Out and PTT jacks, make it a snap to connect
only catch is Win7 has separate controls for each piece of audio
hardware, so you have to also set up the Win7 Playback and Record for
the SignaLink USB, as well
Sam,
Thank you. Yes, I did purchase the special Signalink cable for use with
the K3.
Are there any special K3 setup menu options that need to be set up for use
with the Signalink?
73,
Bob - N7RJN
On 1/19/14, 9:29 PM, "Sam Morgan" wrote:
>hope you bought the SignaLink USB with cable for th
Hi Bob -
I've used the SLUSB on both a K3 and a KX3 with success. The K3 had it hooked
to a MacBook AIr laptop; when I moved the SLUSB to my KX3, I hooked it to an
iMac. Nothing special needs to be done on the K3. In my case I ran native in
the Mac OS X environment. For PSK31 I used cocoaModem
I've found it best to use minimal K3 output (Lin Out 1) and maxing the
levels on the SLUSB drivers. Ideally, you want a sprinkling of snow on the
waterfalls, not a blizzard. I also max the driver TX level then adjust the
Data A level to the proper level. The knobs on the SLUSB are kept at noon
u
Hi Rick,
Thank you. When I ordered my K3 I ordered the TCXO option, as I was
planning on eventually trying the digital modes. Just wondering, what
software do you use for the JT modes?
73,
Bob
On 1/19/14, 11:04 PM, "Rick Bates" wrote:
>I've found it best to use minimal K3 output (Lin Out 1)
While I don't use the modes often because it takes too long for a QSO (with no
real chatting), I have WSJT9, WSPR and JT65-HF ready to go.
73,
Rick wa6nhc
Tiny iPhone 5 keypad, typos are inevitable
> On Jan 20, 2014, at 7:53 AM, Robert Nobis wrote:
>
> Hi Rick,
>
> Thank you. When I ordered
On Sun, 19 Jan 2014 21:40:11 -0700
Robert Nobis wrote:
> Sam,
>
> Thank you. Yes, I did purchase the special Signalink cable for use with
> the K3.
>
> Are there any special K3 setup menu options that need to be set up for use
> with the Signalink?
>
> 73,
>
>
> Bob - N7RJN
>
> On 1/19/14,
First attempt to respond to a thread on this reflector so not sure if I am
headed in the correct direction.
I had trouble with my K3 "power hunting". That is at the beginning of the JT65
or JT9 transmission the output power would be 10 watts and slowly move up
several watts during the 48 second
Mike,
Your post was just fine. You are correct, the K3 behaves differently
than other rigs, so you must drive the audio and set the power differently.
The K3 power starts out lower and builds up to the requested level -
that should happen in just a second or two. I *believe* it takes a
lit
10 matches
Mail list logo