My "FD" experience was a bit different. I operated some with my K3/10 "1D"
from the home QTH with the old dipoles up on 75/40/20m. I wanted to play SSB
QRP and see what kind of fun I could have. I used HamRadio Deluxe, PSDR for
interface then spotted and pounced. I only ran for a couple 2 or
Yep, it's already there (although not settable from the K3 Utility).
From the FW release notes:
"MCU 3.19 / DSP 2.17, 6-14-2009
* POWER-RELATED CONTROL LOCK: The PWR, MIC, and CMP controls
can be locked by tapping '1' in CONFIG:PWR_SET. This is useful in
some contests, such as Field Day, wher
> Every operator cranked the K3 output to max (110W output) could not
> get them to leave it at 100.
I don't know why hams are so uneducated about that. At least 110 watts is
not as bad as what someone I know does with his contest FT1000MP's and other
100W radios. He runs them at 130 watts or mo
> Every operator cranked the K3 output to max (110W output) could not
> get them to leave it at 100. But there were no problems observed.
> Every op had to fiddle with all the buttonsthat's to be expected.
> Hey, we're hams.
Probably not too SSB-neighborly that way. Not sure if this is alrea
I took my K3 to our club's Field Day operation. We have some serious
contesters and DXers in the group, most of which are Yaecomwood
owners. A couple have TenTec. Most of these guys have 5 band DXCC or
are Honor Roll, etc. We can operate CW and SSB on the same band
simultaneously and often do.
5 matches
Mail list logo