On Aug 30, 2006, at 11:02 AM, H.Cary III wrote:
Has anyone connected a RigBlaster with their K2 for SSTV or PSK-31?
I don't use a RigBlaster, but I built a homebrew box with a couple of
transformers that I've successfully used both with MMTTY on an old
Toshiba laptop and with CocoaModem o
On Mon, 4 Sep 2006 20:07:38 -0400, Don Wilhelm wrote:
>The Rigblaster is capable of controlling PTT from its serial port
>connection.
>I don't have a RigBlaster, but I just looked at the schematic
>and see that you must have P5 pin 1 jumpered to pin 10 (PSK31
>programs control PTT with the RTS si
Phil and all,
The Rigblaster is capable of controlling PTT from its serial port
connection.
I don't have a RigBlaster, but I just looked at the schematic and see that
you must have P5 pin 1 jumpered to pin 10 (PSK31 programs control PTT with
the RTS signal), and you must jumper P1:B pin 18 to whi
On Mon, 04 Sep 2006 10:12:47 -0400, Michael E. Dobson wrote:
>Once you have receive working, the instructions supplied for the K2
>should work for transmitting but that will depend upon how you wired
>the microphone connector on your K2. Make sure you have the
>RigBlaster jumpered so that the sig
To the original poster who could not even receive.
The RigBlaster is not used during receive. The audio goes straight
from the K2 (I use the ext speaker jack) to the Line IN jack on your
sound card. Until you can properly receive PSK, SSTV, RTTY, etc,
there is no point in connecting up the
On Sun, 3 Sep 2006 20:47:03 -0400, H. Cary III wrote:
>Will do when I return home...vistiting daughter in
>Philadelphia...hope to get to work on the K2 digital stuff next
>weekend...i did manage to turn on rtty in the secondary menu but
>tht's as far as I've gotten. Only two responses so far...
On Wed, 30 Aug 2006 11:02:12 -0400, H.Cary III wrote:
>Has anyone connected a RigBlaster with their K2 for SSTV or PSK-31? If
>so, I'd like to contact you off-line as I have some questions. I've
>wired the "pins" in the RigBlaster per the instructions for Elecraft and
>hooked it up to the comput
Please send the responses to the reflector? I am sure many of us are
interested!
- Original Message -
From: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
To: elecraft@mailman.qth.net
Sent: Wed Aug 30 11:02:12 2006
Subject: [Elecraft] K-2 and digital question
Has anyone connected a RigBlast
8 matches
Mail list logo