> On 17 Jan 2017, at 16:48, John Stengrevics wrote:
>
> Many thanks to all who provided their suggestions.
>
> I decided to try Joe's (W4TV) suggestion and elect RTS. That appears to have
> solved the problem of the transmit staying on.
>
> My only remaining
In MSK144 the T/R periods for meteor scatter are normally 15 seconds on 50 MHz,
so it is important for all stations to have their clocks as accurate as they
can, within half a second will do, but the closer the better.
Just to explain further, on meteorscatter it is possible for many stations
Bill,
I am on MSK144 and the transmit duration is 15 seconds.
John
WA1EAZ
> On Jan 17, 2017, at 1:02 PM, Nr4c wrote:
>
> Mine only transmits for around 42 seconds. So should not impact the rec on
> next minute.
>
> Sent from my iPhone
> ...nr4c. bill
>
>
>> On Jan
Mine only transmits for around 42 seconds. So should not impact the rec on
next minute.
Sent from my iPhone
...nr4c. bill
> On Jan 17, 2017, at 11:48 AM, John Stengrevics
> wrote:
>
> Many thanks to all who provided their suggestions.
>
> I decided to try Joe's
Many thanks to all who provided their suggestions.
I decided to try Joe's (W4TV) suggestion and elect RTS. That appears to have
solved the problem of the transmit staying on.
My only remaining problem is a 100 to 200 millisecond spillover into the next
sequence. I have synched my Mac to
Can't argue entirely with success, but often folks just want to put the
trouble In a cage so they can get on with having fun. I get that, it's a
hobby. For sure, been there done that.
But all you have done for the moment is put the snarling dog in a cage
where it can't bite. If you ever run an
On 13/01/17 02:06, elecraft-requ...@mailman.qth.net wrote:
> The physical RTS line is moved from the computer to the output of
> the USB UART (in the K3). However, there is still a physical RTS
> line. The set RTS/DTR/Break and clear RTS/DTR/Break commands are
> much more robust than sending
No slight to Joe, who knows what he's talking about, but why not use Jim's
suggestion.
I don't use any of the imaginary modes, but I do use VOX exclusively on RTTY and
PSK. I do wish VOX gain was remembered by mode, however. Request #39.
N7WS
On 1/12/2017 11:55 AM, John Stengrevics wrote:
Three turns of the USB cable through a #43 ferrite and I am good to go at full
power (95 watts).
John
WA1EAZ
> On Jan 12, 2017, at 2:40 PM, Edward R Cole wrote:
>
> Now that the thread has morphed to RFI:
>
> I was getting complaints from my wife that my transmissions
Now that the thread has morphed to RFI:
I was getting complaints from my wife that my transmissions were
getting into the home theater audio when she was watching
TV. Specifically, it was getting into the new powered woofer. I
determined this was only happening on 6m and at 1000w.
So I
In that case it's probably statistically slightly more likely that a CAT
command (seems like about 5 bytes) would get garbled going across the USB
than whatever bit stream went across the USB to turn RTS off. One would be
an op-code (probably 8 bits) plus 5 more bytes, versus the other being just
The USB port on K3S also has the DTR and RTS information available.
Sent from my iPhone
...nr4c. bill
> On Jan 12, 2017, at 1:15 PM, Nicklas Johnson wrote:
>
> Unless I'm mistaken, doesn't the K3S connect directly via USB though? If
> the problem is happening because of common
Thanks all. I’ll try Joe’s suggestion, but have to research it first.
John
WA1EAZ
> On Jan 12, 2017, at 1:50 PM, Nr4c wrote:
>
> Could you have multiple PTTs active. Like PTT and VOX, or two PTTs refed in
> software?
>
> Sent from my iPhone
> ...nr4c. bill
>
>
>> On
Could you have multiple PTTs active. Like PTT and VOX, or two PTTs refed in
software?
Sent from my iPhone
...nr4c. bill
> On Jan 12, 2017, at 10:03 AM, stengrevics wrote:
>
> When I transmit (using MSK144), the transmit stays on after the transmission
> is complete
Nick,
Yes, the K3S connects directly to USB, but inside the K3S is an FTDI USB
to serial converter. It has the RTS and DTR signals and they are
properly routed to the K3S. The RS-232 circuits in the K3S are retained
just like as they were with the K3.
73,
Don W3FPR
On 1/12/2017 1:15 PM,
You should really do what Joe suggested. It is highly unlikely that RFI
would ONLY affect the one CAT command. It more likely is some kind of
timing entanglement which will be difficult to diagnose.
DO try what Joe said:
On Thu, Jan 12, 2017 at 1:08 PM, Joe Subich, W4TV wrote:
there is no physical RTS line involved like there would be in an
old-style COM/RS232 device- there is only serial data going across a
USB cable to a logical COM device inside the K3S. It most likely
wouldn't change anything in this case.
The physical RTS line is moved from the computer to
Correct. The K3S is connected directly to my Mac via a USB cable.
John
WA1EAZ
> On Jan 12, 2017, at 1:15 PM, Nicklas Johnson wrote:
>
> Unless I'm mistaken, doesn't the K3S connect directly via USB though? If
> the problem is happening because of common mode on the USB cable,
Unless I'm mistaken, doesn't the K3S connect directly via USB though? If
the problem is happening because of common mode on the USB cable, there is
no physical RTS line involved like there would be in an old-style COM/RS232
device- there is only serial data going across a USB cable to a logical
On 1/12/2017 11:05 AM, John Stengrevics wrote:
> What’s the solution, ferrites on the USB cable?
Stop using CAT Commands for PTT! Instead set CONFIG:PTT-Key to
RTS-OFF and use RTS. WSJT-X supports PTT Method = RTS by setting
the PTT Port the same as the CAT Port.
73,
... Joe, W4TV
The other thing, too, is if your antenna is just relatively close in
proximity to your shack, it won't matter how well balanced your feedline
is; you may still end up with cables inside your house that are resonant at
or near the frequency where you're transmitting, or at least near enough to
John,
The first step to solving RF-in-the-shack problems is to work on your
antenna system. Better common mode chokes on your feedline(s).
See the information by Jim Brown K9YC at
http://audiosystemsgroup.com/RFI-Ham.pdf.
If you still have problems after taking those measures, then use
Thanks Don. I already have ferrites all over my coax cables, Anderson power
cables, literally all over the house.
Will try on the USB cable as well.
John
WA1EAZ
> On Jan 12, 2017, at 11:17 AM, Don Wilhelm wrote:
>
> John,
>
> The first step to solving
Two things: one is to go through the usual steps around keeping RF out of
the shack. There are a lot of resources around this online regarding
baluns, "ugly baluns" and so-on.
The other thing I've done is exactly as you've said: several turns of
computer cables through ferrite. Watch your cable
Hi Nick,
Thanks for the suggestion! I turned the power down to 2 watts and the problem
went away.
What’s the solution, ferrites on the USB cable?
John
WA1EAZ
> On Jan 12, 2017, at 10:28 AM, Nicklas Johnson wrote:
>
> When I've had this happen with other rigs in the past, it's
25 matches
Mail list logo