: Friday, September 22, 2000 7:53 AM
To: Kazimier Gawrzyjal; 'Lyons, Jim'; 'Grant, Tania (Tania)';
'emc-p...@ieee.org'
Subject: RE: Application of agency safety markings
Sorry folks...need more coffee today as the info I added wasn't an answer
Tania's
tel:403-769-4805 (ESN 758)
fax:403-769-4813 (ESN 758)
e-mail: k...@nortelnetworks.com
-Original Message-
From: Lyons, Jim [mailto:jim.ly...@gtech.com]
Sent: Friday, September 22, 2000 6:44 AM
To: 'Grant, Tania (Tania)'; 'emc-p...@ieee.o
sage-
From: Colgan, Chris [mailto:chris.col...@tagmclarenaudio.com]
Sent: Friday, September 22, 2000 5:14 AM
To: 'emc-p...@ieee.org'
Subject: RE: Application of agency safety markings
At my last company, we were allowed to silk screen the UL logo (when we used
UL) and the CSA logo (when we
e-
> From: Paul J Smith [SMTP:paul_j_sm...@notes.teradyne.com]
> Sent: Friday, September 22, 2000 8:57 AM
> To: Grant, Tania (Tania)
> Cc: 'emc-p...@ieee.org'
> Subject: Re: Application of agency safety markings
>
> Tania,
>
> NRTLs, including UL
the value of the equipment.
David Sterner
ADEMCO
-Original Message-
From: geor...@lexmark.com [mailto:geor...@lexmark.com]
Sent: Friday, September 22, 2000 10:02 AM
To: emc-p...@majordomo.ieee.org
Subject: RE: Application of agency safety markings
As we know, IEC 60950 only addresses &quo
ther other NRTLs
> in this country have the same requirement. Any replies or experience you
> might have had are welcome!
>
> Tania Grant, tgr...@lucent.com
> Lucent Technologies, Switching Solutions Group
> Intelligent Network and Messaging Solutions
>
Title: RE: Applicati
At my last company, we were allowed to silk screen the UL logo (when we used
UL) and the CSA logo (when we switched to CSA) on the unassembled metalwork
of our products. The silkscreened metalwork was produced at several
unspecified engineering companies, so in effect the logo wasn't applied
anyw
58)
fax:403-769-4813 (ESN 758)
e-mail: k...@nortelnetworks.com
>
-Original Message-
From: Gawrzyjal, Kazimier [WDC:C149:EXCH]
Sent: Friday, September 22, 2000 8:47 AM
To: 'Lyons, Jim'; 'Grant, Tania (Tania)'; 'emc-p...@ieee.org'
Subject: RE: Applica
As we know, IEC 60950 only addresses "Marking and instructions" for the
safe use of ITE. It does not address agency marks, or when and where they
are applied.
If I were starting the first certification agency in the universe, common
sense would dictate that the "mark" of conformity be applied a
Tania,
NRTLs, including UL, have allowed for application of their labels on compliant
equipment after a field inspection for relevant standards compliance is
conducted by the NRTL representative. I have personally been involved in such a
field inspection on the west coast when I was with another
I recently had a situation where we had transferred some completed product
to a warehouse to free up floor production space while an ETL investigation
was still underway, but before we had obtained the ETL approval. ETL would
not allow us to simply go to the warehouse and affix the markings even
t
Hello Tania,
CSA also requires the marking be only applied at the locations that we
identify as factory locations... Off-hand, I don't know where this is
written, but I suspect it's part of the follow-up services requirements for
an NRTL??..
George
> -Original Message-
> From: Grant, Ta
Tania,
ITS is doing the same.
The opinion expressed here are my own and does not necessarily
reflect that of my employer.
Daniel Sicard
Compliance Engineer / Ingénieur Certification
Marconi Communications - Optical Network Corp
Tel: 514-685-1737 Ext. 4631 Fax: 514-822-4077
E-mail: mailto:da
Tania,
If "the factory location" means "NRTL inspected factory location", the
answer to your question would be: YES. For example: CSA requires their logo
to be affixed at "the source" (where final production-line safety tests are
conducted). As far as I know, INTERTEK and TUV have similar require
14 matches
Mail list logo