Hi,
I've a problem compiling the trunk version of emc2.
Configure goes ok, without warnings.
While compiling I get this error message:
hal/utils/halsh.c: In function Hal_Init:
hal/utils/halsh.c:93: warning: passing argument 3 of Tcl_CreateCommand
from incompatible pointer type
hal/utils/ha
now compiled...
but when I launch scripts/emc I get the following error:
[EMAIL PROTECTED]:~/emc2-trunk$ scripts/emc
EMC2 - pre-2.2 CVS HEAD
Error in startup script: can't find package msgcat
while executing
"package require msgcat"
(file "/home/manfredi/emc2-trunk/tcl/bin/../emc.tcl" lin
On Thu, May 17, 2007 at 11:48:56AM +, Manfredi Leto wrote:
> now compiled...
>
> Error in startup script: can't find package msgcat
> ...
> I searched for the package msgcat in package manager but I don't find
> it...anyone knows what should I install?
gettext
I found it using apt-file.
$
Might not be the same as the tcl msgcat package which tkemc looks for..
Most distros I've seen already have that installed..
Manfredi: can you tell us a bit about your OS / system?
Regards,
Alex
- Original Message -
From: "Chris Radek" <[EMAIL PROTECTED]>
To: "Enhanced Machine Controlle
The OS is Ubuntu 6.06...the same I use at home.
This is the computer I use at university, so I cannot check other things
right now because I'm not there, I can try other things tomorrow and will
let you know what happened. the PC is a P4 on a ASUS P5VD2-MX SE motherboard
with 512 Mb RAM.
Please
Manfredi Leto wrote:
> Please note that I've installed packages gettext and tclx8.3 as suggested by
> paul_c and chris, but the result was the same.
The Tcl parts of EMC are not my area of expertise, so this could be
totally wrong, but I think EMC uses tcl 8.4, not 8.3.
Regards,
John Kasunich
Gentlemen,
I am still working on my homing problem. I have a screen shot of
the halscope. Where should I upload it to give you access?
thanks
Stuart
-
This SF.net email is sponsored by DB2 Express
Download DB2 Express C -
On Thu, May 17, 2007 at 01:41:13PM +, Manfredi Leto wrote:
> The OS is Ubuntu 6.06...the same I use at home.
> This is the computer I use at university, so I cannot check other things
> right now because I'm not there, I can try other things tomorrow and will
> let you know what happened. the
Is there anyway to add this as a feature?
Andy
Kenneth Lerman wrote:
> We *could* have a bit to set in the INI file to kill this feature if the
> owner so desires.
>
> All it would take is an implementor with the proper skills who desired to do
> that.
>
> As long as the default was to "do the ri
Hi,
try to use imagebin: http://imagebin.org/
regards,
Manfredi
My websites: www.m24-pro.com
www.emc2cnc.altervista.org
>From: "Stuart Stevenson" <[EMAIL PROTECTED]>
>Reply-To: "Enhanced Machine Controller (EMC)"
>
>To: Emc-users@lists.sourceforge.net
>Subject: [E
when I put EMC2 into estop from halui the spindle signal stays true and the
coolant signals goes false.
the trouble is I can not clear the signal to the spindle until I'm out of estop
and the spindle stays running.
why does the coolant get dropped and not the spindle signal with it?
what is the
On Thu, May 17, 2007 at 10:24:57AM -0400, Alfred Smart wrote:
> when I put EMC2 into estop from halui the spindle signal stays true and the
> coolant signals goes false.
> the trouble is I can not clear the signal to the spindle until I'm out of
> estop and the spindle stays running.
> why does
I just run a % sign at the start and end of my programs, nothing else
Andy
Jon Elson wrote:
> Andy Holcomb wrote:
>
>> Okay, I am making a request/plea.
>>
>> Refresher, I loaded up EMC2 after running BDI for about 3 or 4 years
>> and I use TkEMC (because I like it!!!). After running my first
Gentlemen,
I have uploaded a picture to imagebin. The name of the picture is stustev.
This is a screen shot of the feedback from the homing cycle of my
machine. I am using ppmc boards and EMC2-head.
The machine moves positive to the home switch.
I have the latch velocity set very lo
_
De: Fabricio Funes [mailto:[EMAIL PROTECTED]
Enviada em: quinta-feira, 17 de maio de 2007 20:10
Para: 'emc-users@lists.sourceforge.net'
Assunto: ENC: G02 and G03 dont Close a Circle
Hi ,
I'm using servo-motor with a Vital system. When I use the command G02 or
G03 the circ
On Thu, May 17, 2007 at 08:18:20PM -0400, Fabricio Funes wrote:
>
> I'm using servo-motor with a Vital system. When I use the command G02 or
> G03 the circle Don't Close. But in the EMC2 Graphical simulation it's close
> Very Well.
>
> How I do to resolve this problem .
Hi Fabricio, you don't
Andy,
> Is there anyway to add this as a feature?
>
> Andy
>
This is from EMC1 interpreter experience, so some terms may have changed.
The ini file access point for the interpreter (in EMC2) was at one point in
rs274ngc_pre.cc, where you should find a function like "ini_load(const char
*filen
17 matches
Mail list logo