Frank Tkalcevic wrote:
>> I have a very well-hidden article on tuning.
>>
>
> Excellent. And very well hidden. Every week I seem to accidentaly find a
> great article on the emc web site.
>
>
>> See http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?PWM_Servo_Amplifiers
>>
>
>
> How do yo
> I have a very well-hidden article on tuning.
Excellent. And very well hidden. Every week I seem to accidentaly find a
great article on the emc web site.
> See http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?PWM_Servo_Amplifiers
How do you generate your step pulses? When I was tunning, I woul
Jon and Robert,
Thanks--this link looks like just the thing.
--Dale
At 2:48 PM -0500 8/8/09, Jon Elson wrote:
>Dale Grover wrote:
>> I'm writing up a little article on EMC and would like to include a
>> graphic image of EMC being used to tune a servo. Does anyone have a
>> plot (before and a
Dale Grover wrote:
> I'm writing up a little article on EMC and would like to include a
> graphic image of EMC being used to tune a servo. Does anyone have a
> plot (before and after tuning) showing a step response for a servo?
>
I have a very well-hidden article on tuning. it is aimed at my
What about this page?
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?PWM_Servo_Amplifiers
here is my mill i retro fitted from a Mitsubishi M0 control to EMC
http://www.linuxcnc.org/component/option,com_kunena/Itemid,20/func,view/catid,30/id,559/lang,en/
the next retrofit is two Hardinge Superslants
Dale,
if the article is to show EMC capabilities in order to promote the
retrofitting of EMC I am interested.
I have a business relation with two of the same milling centers with
very old Fanuc controllers.
One is broken (PC problem) and repair will cost more than an EMC
retrofit. Also the old
I'm writing up a little article on EMC and would like to include a
graphic image of EMC being used to tune a servo. Does anyone have a
plot (before and after tuning) showing a step response for a servo?
Also, would be happy to get feedback on the article so far. Email me
if interested.
Thank
