On Tuesday 29 June 2010, Mark Wendt wrote:
>Has anybody messed with incremental jogs using the buttons on those
>nice, chea..., uh, inexpensive Logitech controllers (the poor man's
>MPG). Looking to wire up a set of buttons for my Z axis to jog in
>increments of .01" and .001" rather than have to
On Tuesday 29 June 2010, Mark Wendt wrote:
>On 06/19/2010 04:53 PM, Gene Heskett wrote:
>> Hi all;
>>
>> I have a rather weird thing that seems to have developed, apparently
>> while my 4th axis, a rotary table, was disconnected and machined so that
>> it has a good friction lock that can be mostly
Hello!
I have 2 questions about EMC2, I hope that somebody can point me into
some useful direction.
1) Is there a way to update from 2.4.0 to 2.4.1 on Lucid?
2) I have been trying to compile EMC2 on Lucid without any success.
What I did:
Acquired EMC2 source by executing:
git clone git://git.lin
hi,
follow these instructions:
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Installing_EMC2#Building_emc2_realtime
regards,
Michael
Viesturs Lācis pisze:
> Hello!
>
> I have 2 questions about EMC2, I hope that somebody can point me into
> some useful direction.
> 1) Is there a way to update from
On 06/30/2010 07:37 AM, Viesturs Lācis wrote:
> Hello!
>
> I have 2 questions about EMC2, I hope that somebody can point me into
> some useful direction.
> 1) Is there a way to update from 2.4.0 to 2.4.1 on Lucid?
>
> 2) I have been trying to compile EMC2 on Lucid without any success.
>
> What I di
The configure script is generated by the autogen script. Run autogen,
then configure, as shown on the wiki:
2.6. Building emc2 (simulator)
Run these commands in the directory created by git above:
$ cd src
$ ./autogen.sh
$ ./configure --enable-run-in-place --enable-si
My milling machine has 4 M10 holes on the face of the spindle. (It is
a 30 INT). it appears that these are part of the specification for
30INT. Has does anyone know what they are for?
http://i200.photobucket.com/albums/aa294/oldtiffie/machine_tapers/Machine-taper5.jpg
--
atp
---
These bolt holes are used for mounting large face
mills. They use a centering plug in the taper but
do not rely on a drawbar to hold them into the
spindle. The plug is not a permanent part of the
face mill, but rather an accessory used with an
other face mills.
> -Original Message-
> Fro
Thank You, Jeff and Michal for the suggestions!
They helped me to get to point, when I run
$ ./configure
And besides all the other data in terminal, I see that at the end of
output is following line:
configure: error: GTK2 missing. Install it or specify --disable-gtk to
skip the parts of emc2 that
You can run make only when configure will run wthout any errors
And you must 'sudo apt-get install libgtk2.0-dev' to fix gtk problem you
have.
regards
Michael
Viesturs Lācis pisze:
> Thank You, Jeff and Michal for the suggestions!
> They helped me to get to point, when I run
> $ ./configure
>
>
Ok, thank You!
Viesturs
2010/6/30 Michał Geszkiewicz :
> You can run make only when configure will run wthout any errors
> And you must 'sudo apt-get install libgtk2.0-dev' to fix gtk problem you
> have.
>
> regards
> Michael
>
> Viesturs Lācis pisze:
>> Thank You, Jeff and Michal for the suggest
My apologies for sending e-mail before the typing full text is finished.
I managed to complete all these commands.
$ ./autogen.sh
$ ./configure
$ make
$ sudo make setuid
I also ran these commands:
$ . /home/waterjet/emc2-dev/scripts/emc-environment
$ emc
The last one started EMC2. Which means tha
For a run-in-place build of emc2, you can
make install-menus
to put items in the Applications > CNC menu.
I'm not sure this is documented anywhere; please feel free to improve
the wiki by mentioning it.
As far as I recall, this capability is new in emc2.4.
Jeff
-
YAY! I can report on successful compiling EMC 2.5~pre on Lucid!
2010/6/30 Jeff Epler :
> For a run-in-place build of emc2, you can
> make install-menus
> to put items in the Applications > CNC menu.
>
> I'm not sure this is documented anywhere; please feel free to improve
> the wiki by mentioni
Eventually the buildbot will make lucid packages...
For now, here's how to create a debian package from your git checkout:
cd to your git checkout (probably $HOME/emc2-dev)
cd debian
./configure -a
cd ..
fakeroot debian/rules binary
dpkg -i ../*.deb
--
Sebastian Kuzminsky
- Reply message
On Wed, Jun 30, 2010 at 11:25:46PM +0300, Viesturs Lācis wrote:
> YAY! I can report on successful compiling EMC 2.5~pre on Lucid!
>
> 2010/6/30 Jeff Epler :
> > For a run-in-place build of emc2, you can
> > make install-menus
> > to put items in the Applications > CNC menu.
> >
> > I'm not sure
Hello, i'm interested in that machining center, i'm from argentina and i
would really appreciate if you could help me, i noticed that the bid
finishes in 1 hour so i'm going to place mine.
Thanks in advance.
Regards.
Leonardo.
2010/6/30 Tom
> Andy Pugh writes:
>
> >
> > $103? It's worth that
I hope your not bidding on the one I'm bidding on :)
John
Leonardo Marsaglia wrote:
> Hello, i'm interested in that machining center, i'm from argentina and i
> would really appreciate if you could help me, i noticed that the bid
> finishes in 1 hour so i'm going to place mine.
>
> Thanks in adva
Leonardo Marsaglia writes:
>
> Hello, i'm interested in that machining center, i'm from argentina and i
> would really appreciate if you could help me, i noticed that the bid
> finishes in 1 hour so i'm going to place mine.
>
> Thanks in advance.
>
> Regards.
>
> Leonardo.
>
Hi
In small industrial city (where I am), I can count few CAD/CAM software
that in use.
Here is list of CAM software - everything for mill and some cost, which
is very important.
1. MasterCAM; ($ 16 000)
2. ProE manufacturing;
3. CATIA; ($ 21 500)
4.
What do you guys use for nesting software..
For instance cutting out various shapes on a plasma, waterjet, or laser?
http://mynesting.com/
I found this website and I have used it a few times and bought the
nested results twice so far. It seems to struggle with larger pieces
nested on a smaller
21 matches
Mail list logo