Ian,
a couple of years ago I made a whole drawer full of gears, 30 to 240
teeth, for precisely the same purpose, but as I own a tiny combination
mill (called UWG, google it), unfortunalely delivered without gears, but
set up as CNC, I milled them with a stepper powered dividing head and
home
I think you need a bigger, faster, stronger mill... ;-)
So, does this mean everything is now up and running on the old girl?
Mark
On 02/27/2012 10:49 PM, sam sokolik wrote:
Random video!
http://youtu.be/U61ub6mtpH4
(we don't like the idea of the probe spinning around in the tool
I just got a mesa 5i25
I have successfully used this computer, motherboard K8T890, for almost 2 years
to run my table top mill
If I plug the 5i25 in it does not show up in the hardware list
When the pc boots, part of the post is a screen showing all installed hardware
The 5i25 is not in that list
2012/2/28 kqt4a...@gmail.com:
I ordered the card with PROB_RFX2 firmware to drive a probotix controller
I am not 100% sure but I thought I would only need to change the addresss in
my ini file
I have set up 2 machines with 5i25 and also with 5i23. I do not
remember any address for pci cards
On Tue, 28 Feb 2012, Viesturs Lācis wrote:
2012/2/28 kqt4a...@gmail.com:
I ordered the card with PROB_RFX2 firmware to drive a probotix controller
I am not 100% sure but I thought I would only need to change the addresss in
my ini file
I have set up 2 machines with 5i25 and also with 5i23.
2012/2/28 kqt4a...@gmail.com:
On Tue, 28 Feb 2012, Viesturs Lācis wrote:
I have set up 2 machines with 5i25 and also with 5i23. I do not
remember any address for pci cards in INI or HAL files.
Could You, please, explain, what kind of address You mean?
In my .hal file 'loadrt hal_parport
On Tue, 28 Feb 2012, kqt4a...@gmail.com wrote:
Date: Tue, 28 Feb 2012 09:35:25 -0600 (CST)
From: kqt4a...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users]
On 2/27/2012 6:15 PM, Ian W. Wright wrote:
Hi Kent,
No, on this one I'm using the stock Arduino electronics - it
was easier to set up and it works fine. I'm using the Marlin
firmware and Repetier host software on an Ubuntu 11.x box
(with Mono to allow the Repetier to work in the linux
On Tue, 28 Feb 2012, Viesturs Lācis wrote:
2012/2/28 kqt4a...@gmail.com:
On Tue, 28 Feb 2012, Viesturs Lācis wrote:
I have set up 2 machines with 5i25 and also with 5i23. I do not
remember any address for pci cards in INI or HAL files.
Could You, please, explain, what kind of address You
On Tue, 28 Feb 2012, Peter C. Wallace wrote:
On Tue, 28 Feb 2012, kqt4a...@gmail.com wrote:
Date: Tue, 28 Feb 2012 09:35:25 -0600 (CST)
From: kqt4a...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC)
On Tue, 2012-02-28 at 07:03 +, Chris Morley wrote:
... snip
When I fire up classicladder (I'm using the parent version not EMC's)
then run sudo netstat -anp --tcp
I see:
tcp0 0 0.0.0.0:95030.0.0.0:* LISTEN
20701/classicladder
so that is
On Tue, 2012-02-28 at 09:48 -0800, Kirk Wallace wrote:
... snip
My guess is that anywhere you would put the serial slave address one can
put the TCP address instead. If you are already changing the port, just
put the IP address in with it, maybe like:
192.168.1.10:9502
^^^IP ADR^^^:^Port
On Tue, 28 Feb 2012, Viesturs Lācis wrote:
2012/2/28 kqt4a...@gmail.com:
On Tue, 28 Feb 2012, Viesturs Lācis wrote:
I have set up 2 machines with 5i25 and also with 5i23. I do not
remember any address for pci cards in INI or HAL files.
Could You, please, explain, what kind of address You
On Tue, 2012-02-28 at 13:27 -0500, Stephen Dubovsky wrote:
We use modbus modbus/ip in our products here. For IP, you need both an
ip addr/port AND the modbus slave address. Each device can have
240-something addresses. Think of an IP to RS485 bridge (moxa and others
make them). I can talk
On Tue, 28 Feb 2012, Viesturs Lācis wrote:
2012/2/28 kqt4a...@gmail.com:
On Tue, 28 Feb 2012, Viesturs Lācis wrote:
I have set up 2 machines with 5i25 and also with 5i23. I do not
remember any address for pci cards in INI or HAL files.
Could You, please, explain, what kind of address You
2012/2/28 kqt4a...@gmail.com:
Now I have CONFIG=
And that is it? No stepgens or pwmgens or encoder modules loaded?
Paste Your INI and HAL files somewhere for public review.
Viesturs
--
Keep Your Developer Skills
I think you need to re-read this...
2) remove the firmware = [path/to/firmware/file] part of the config =
line, keep any commands for loading stepgens, pwmgens or encoder
modules, if they are needed for Your machine.
I read that as...
no, that's the TCP destination port, nothing todo with the slave
A TCP connection is defined by {sourceip-address,some source port,
destip-address,destination port}
once established, it's just a bidirectional stream of bytes with no
interpretation, just like a serial connection over
On Sun, 26 Feb 2012 09:11:33 -0800
Kirk Wallace kwall...@wallacecompany.com wrote:
On Sun, 2012-02-26 at 08:48 +, Steve Blackmore wrote:
... snip
Most have a resolution of 1200 dpi in mono. I've done PCB masters on
transparency film with 5 thou lines for contact printing (UV) then
Am 28.02.2012 um 20:12 schrieb Kirk Wallace:
It seems that Modbus over TCP/IP setups are more common in the wild than
end to end Ethernet Modbus TCP/IP, but if one where to set up LinuxCNC
the vfs11_vfd driver I pushed yesterday is a Modbus master which suppports
serial as well as
wow - sorry about that
[HOSTMOT2]
DRIVER=hm2_pci
BOARD=5i23
CONFIG=firmware=hm2/5i23/SVST8_4.BIT num_encoders=0 num_pwmgens=0
num_stepgens=3
should be
[HOSTMOT2]
DRIVER=hm2_pci
BOARD=5i25
CONFIG=num_encoders=0 num_pwmgens=0 num_stepgens=3
From what I understand.
On 02/28/2012 01:24 PM, sam
On Tue, 28 Feb 2012, Viesturs Lācis wrote:
2012/2/28 kqt4a...@gmail.com:
Now I have CONFIG=
And that is it? No stepgens or pwmgens or encoder modules loaded?
Paste Your INI and HAL files somewhere for public review.
No, I only changed the config line as I understood you to say
On Tue, 28 Feb 2012, sam sokolik wrote:
wow - sorry about that
[HOSTMOT2]
DRIVER=hm2_pci
BOARD=5i23
CONFIG=firmware=hm2/5i23/SVST8_4.BIT num_encoders=0 num_pwmgens=0
num_stepgens=3
should be
[HOSTMOT2]
DRIVER=hm2_pci
BOARD=5i25
CONFIG=num_encoders=0 num_pwmgens=0 num_stepgens=3
2012/2/28 kqt4a...@gmail.com:
'/usr/realtime-2.6.32-122-rtai/modules/emc2/hm2_pci.ko': -1 No such device
My unqualified guess is that 5i25 card is not recognized.
I will leave this for more knowledgeable users to comment.
Do You have a chance to attach the HDD and 5i25 to another motherboard
Viesturs
You must have a
firmware=whatever.bit
somewhere... Could it be in your hal file? Otherwise I don't think it will
work..
On 2/28/2012 1:41 PM, Viesturs Lācis wrote:
2012/2/28kqt4a...@gmail.com:
On Tue, 28 Feb 2012, Viesturs Lācis wrote:
2012/2/28kqt4a...@gmail.com:
Now I
On 2/28/2012 2:03 AM, Chris Morley wrote:
CL requires the address and the port number (9502 id default).
I somewhat understand the address but not really the port number.
Can you elaborate how you found this info? keep in mind I have
almost no knowledge of networks other then plugging
Is your PC now finding the 5i25 card when you do lspci ??
If not, you will never get anything to load onto the card since the PC
doesn't recognize that the card exists.
If lspci doesn't show the card you should probably try the card in a
different PC and see if the OS recognizes the card.
On Tue, 28 Feb 2012, Viesturs Lācis wrote:
2012/2/28 kqt4a...@gmail.com:
'/usr/realtime-2.6.32-122-rtai/modules/emc2/hm2_pci.ko': -1 No such device
My unqualified guess is that 5i25 card is not recognized.
I will leave this for more knowledgeable users to comment.
Do You have a chance to
Linuxcnc has performed flawlessly.
It's awesome software. :-)
Dave
On 2/28/2012 11:25 AM, sam sokolik wrote:
I still have to finalize my control panel. It is still just a piece of
plexi-glass with knobs and dials stuck through it. :) I would like to
make up a pendant (maybe using a
Check this mill out. Used to make the molds for the America's Cup
boats.
http://www.janicki.com/5-axis-milling.html
--
Keep Your Developer Skills Current with LearnDevNow!
The most comprehensive online learning library
2012/2/28 sam sokolik sa...@empirescreen.com:
Viesturs
You must have a
firmware=whatever.bit
somewhere... Could it be in your hal file? Otherwise I don't think it will
work..
No, 5i25 is different from other Mesa pci cards, the firmware is
loaded and stored right in the card. When I
Hi all,
I am trying to put o-word subroutines in a different folder from nc_files.
In the ini file (I tried testing on sim/axis.ini and sim/tkemc.ini) I have:
PROGRAM_PREFIX = /home/emcuser/emc2/nc_files
So under [RS274NGC] I entered:
SUBROUTINE_PATH = /home/emcuser/emc2/subroutines
And call
On Tue, 2012-02-28 at 07:03 +, Chris Morley wrote:
... snip
When I fire up classicladder (I'm using the parent version not EMC's)
then run sudo netstat -anp --tcp
I see:
tcp0 0 0.0.0.0:95030.0.0.0:* LISTEN
20701/classicladder
so that is
I have been to Sedro-Woolley, WA several times and did not know there
was a CNC engineering firm there.
The population was 10,540 at the 2010 census
/wiki/2010_United_States_Census. It is included in the Mount Vernon
/wiki/Mount_Vernon,_Washington--Anacortes
/wiki/Anacortes,_Washington,
On 28/02/2012 16:15, Kent A. Reed wrote:
My grandkids range in age from 7 to 11. They've done some
simple woodworking with their parents but are still too
young, I believe, for metal-cutting machine tools. I think
they're ripe for RepRap. They can participate in building
the machine, as
You never know what is going to come crawling out of the woodwork. :-)
You do know about the big shop in Carnation?
Dave
n Tue, 28 Feb 2012 14:24:46 -0800
Gary Fiber gfi...@comcast.net wrote:
I have been to Sedro-Woolley, WA several times and did not know there
was a CNC engineering firm
dave wrote:
If anyone is really desperate I think I still have some KPR (Kodak
photoresist) around. IIRC ... vacuum pull down the photomask over the
substrate (board) expose with UV. Develop with toluene. Etch.
Since I'm a packrat (I'm obviously relate to Neotoma cinerea ) ;-) the
KPR is
On Tue, 2012-02-28 at 14:21 -0800, Kirk Wallace wrote:
... snip
My guess is that as any ports above 1000 have lighter
restrictions, maybe ports above a higher value are handled differently
too, so 1502 doesn't show where 9502 does. I guess I have more work to
do.
Oops, pilot error here. The
On Tuesday, February 28, 2012 11:37:01 PM Eric H. Johnson did opine:
Hi all,
I am trying to put o-word subroutines in a different folder from
nc_files. In the ini file (I tried testing on sim/axis.ini and
sim/tkemc.ini) I have:
PROGRAM_PREFIX = /home/emcuser/emc2/nc_files
So under
On 27.02.12 20:54, Lars Andersson wrote:
In EMC.ini I have PROGRAM_PREFIX = /home/la/emc2/scripts.
This seems to affect defaults for both script and gcode files.
I would like to have different paths for script and gcode files.
Can I have that?
On 28.02.12 16:19, Eric H. Johnson wrote:
On Tue, 28 Feb 2012 20:06:25 -0600
Jon Elson el...@pico-systems.com wrote:
dave wrote:
If anyone is really desperate I think I still have some KPR (Kodak
photoresist) around. IIRC ... vacuum pull down the photomask over
the substrate (board) expose with UV. Develop with toluene. Etch.
On 28.02.12 12:32, dave wrote:
Check this mill out. Used to make the molds for the America's Cup
boats.
http://www.janicki.com/5-axis-milling.html
That offhand mention of contra-torque backlash elimination is kinda
interesting, but perhaps it's not that different from a loaded ballnut
pair?
I'd say the contra-torque statement says that one of the gears is split
'horizontally' (seen when it lays on the table)
and the main motor drives the one while an auxiliary applies a constant
torque on the other in oposite direction.
And so: no backlash.
For direction change the motors change
43 matches
Mail list logo
