> Now I have 2 questions:
> 1) what is "rung"?
A rung is the area between the horizontal bars.
One 'screen', 6 lines (in Classicladder's case)
> 2) can I make larger that piece of "section display" in which I can
> draw the ladder logics? now it consists of several blocks and it seems
> pretty
A "rung" is the network from the left rail to the right rail which may
include branches if you click on a section and with the editor open
click on delete you will delete one "rung".
The section display ("rung") appears to be fixed at 6 high
On 8/18/2012 1:30 PM, Viesturs Lācis wrote:
> 2012/8/
2012/8/18 John Thornton :
> It's hard to describe here but I'll try... sounds like you need a timer
> and based on the value of the timer you assign a value to your output
> pin. you have to arrange your rungs... this would be so much easier on
> the forum I could upload a screenshot...
>
Thanks!
It's hard to describe here but I'll try... sounds like you need a timer
and based on the value of the timer you assign a value to your output
pin. you have to arrange your rungs... this would be so much easier on
the forum I could upload a screenshot...
John
8/18/2012 11:08 AM, Viesturs Lācis
2012/8/18 John Thornton :
>
> The variable assignment along with your input logic should work.
>
> http://linuxcnc.org/docs/html/ladder/classic_ladder.html#_variable_assignment
Thanks!
I already found that part.
The question is:
Can I assign different values to _one and the same_ s32 output pin?
If you don't load your ladder at start up it won't be there...
The variable assignment along with your input logic should work.
http://linuxcnc.org/docs/html/ladder/classic_ladder.html#_variable_assignment
On 8/18/2012 10:44 AM, Viesturs Lācis wrote:
> 2012/8/18 John Thornton :
>> Are you loadin
2012/8/18 John Thornton :
> Are you loading the user part of classicladder?
>
> loadusr classicladder --nogui hardinge.clp
>
I have only these 2 lines in HAL:
loadrt classicladder_rt
addf classicladder.0.refresh servo-thread
I can open Ladder editor from LinuxCNC menu.
I think that I found the s
Are you loading the user part of classicladder?
loadusr classicladder --nogui hardinge.clp
John
On 8/18/2012 7:34 AM, Viesturs Lācis wrote:
> Hello!
>
> I started to work on config for the machine I am building and I am now
> stuck with figuring out, how to properly set up material pushers.
> I
It seems to me like solder paste is going to separate under any pressure
differential without some special design or consideration to keep the paste
together.
On Sat, Aug 18, 2012 at 7:34 AM, andy pugh wrote:
> On 18 August 2012 13:18, wrote:
> > I found a high pressure pump (up to 40,000PSI)
Hello!
I started to work on config for the machine I am building and I am now
stuck with figuring out, how to properly set up material pushers.
I decided that I might try out classicladder.
In HAL file I have:
loadrt classicladder_rt
addf classicladder.0.refresh servo-thread
In LinuxCNC window I
On 18 August 2012 13:18, wrote:
> I found a high pressure pump (up to 40,000PSI) that may work with solder
> paste. These are readily available on ebay as high pressure liquid
> chromatography (HPLC) pumps. A description is here:
> http://www.lcresources.com/resources/getstart/2b01.htm
I s
I found a high pressure pump (up to 40,000PSI) that may work with solder paste.
These are readily available on ebay as high pressure liquid chromatography
(HPLC) pumps. A description is here:
http://www.lcresources.com/resources/getstart/2b01.htm
Even if a standard Waters style pump has geom
12 matches
Mail list logo
