On Fri, Oct 19, 2012 at 08:42:15PM -0400, lloyd wilson wrote:
>
> make: Failed to remake makefile `Makefile'.
You can ask make to elaborate on this error; see
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?FailedToRemakeMakefile
I'm starting to work on a user interface program for a physical control
panel for my hurco mill & can't get the makefile to cooperate. The
program will essentially provide a subset of the NML messages as defined
in halui, but with modbus communication rather that HAL. To verify the
build enviro
On 10/19/2012 9:58 PM, Kenneth Lerman wrote:
> On 10/19/2012 9:23 PM, Jon Elson wrote:
>
>> ed wrote:
>>
>>> I talked to a vendor there in the mid 90's and he said it was $60K for
>>> the show. His booth was a 20 by 20 in the basement behind the stairwell
>>> in the old South building, th
On 20 October 2012 02:37, Jon Elson wrote:
> I figured out how to adapt
> a spindle encoder even to a machine that made a traditional approach pretty
> much impossible. See http://pico-systems.com/bridge_spindle.html
> for some pics and description.
Me too:
https://picasaweb.google.com/10816450
On 10/19/2012 9:23 PM, Jon Elson wrote:
> ed wrote:
>> I talked to a vendor there in the mid 90's and he said it was $60K for
>> the show. His booth was a 20 by 20 in the basement behind the stairwell
>> in the old South building, the least prime spot you could find in the
>> whole show. He could n
Greg Bentzinger wrote:
>
> My problem is this - with site 3phase power you can throw a motor running
> forward into reverse and it just does it. I'm sure the control has a ever so
> slight delay between relay actions to allow for mechanical times to prevent
> switching "shoot through" but I have
Stuart Stevenson wrote:
> I still have people in
> my shop ask me 'Does EMC have cutter comp?' or 'Does EMC have backlash
> compensation?'. So far, I graciously answer yes to both questions without
> questioning the intelligence of the asker. :) We have run LinuxCNC for
> years and people still th
ed wrote:
>
> I talked to a vendor there in the mid 90's and he said it was $60K for
> the show. His booth was a 20 by 20 in the basement behind the stairwell
> in the old South building, the least prime spot you could find in the
> whole show. He could not even plug in his own equipment, had to
Stuart Stevenson wrote:
> Jon,
>
> I have more than one project to do.
>
Well, NAME them, so we can start drooling about them!
I'll have to tell you about what I'm working on with Fanuc red cap
serial encoders, too!
Jon
--
You can reverse with a VFD, no problem.
You need to have correct ramping parameters set and probably brake
resistors also.
i
On Fri, Oct 19, 2012 at 9:47 PM, Greg Bentzinger wrote:
>
>
> I am converting a cnc knee mill from 3 phase to single phase.
>
> The spindle is 3hp (2.2kw) and I am fitti
I am converting a cnc knee mill from 3 phase to single phase.
The spindle is 3hp (2.2kw) and I am fitting a VFD in place of the HD relays
that just turned the power on in FWD or REV.
Speed will not be controlled directly by the VFD, only direction. The mill
(Hurco KM3P) uses the common Bridge
IMTS vendor trick
the unions handle everything ( plugging in cord, taping crepe-paper to
tables, unfolding tables )
a lot of people tried to bribe them so the people could do it themselves
doesnt work, theres just too many bribes
we dragged in coolers full of beer
thats something they could NOT ge
I used to go every two years. I would return with the deer in the
headlights look and dream the rest of the two years until the next one.
LinuxCNC ruined the show for me. I can do everything I see and more. I have
gone twice since getting involved with LinuxCNC and have been disappointed
both times
Count me in
Terry
- Original Message -
From: Stuart Stevenson
To: Enhanced Machine Controller (EMC)
Cc:
Sent: Friday, October 19, 2012 2:06 PM
Subject: Re: [Emc-users] LinuxCNC Week in Wichita
Jon,
I have more than one project to do.
thanks
Stuart
--
dos centavos
--
Jon Elson wrote:
> Stuart Stevenson wrote:
>
>> tongue in cheek/
>> if you want exposure think IMTS
>> /tongue in cheek
>>
>>
> Some of the guys in our shop at work go there every couple years. They have
> that "deer in the headlights" look for a few weeks after. Probably cost
> my e
Jon,
I have more than one project to do.
thanks
Stuart
--
dos centavos
--
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/
Stuart,
Oh, and Stuart, THANK YOU for stepping up and setting a date
(not to mention providing the place, too)! That's what a bunch of
us "hmmm, well, it would sure be nice if somebody would organize
something, err, well, ahhh" needed to get this going!
Jon
-
Stuart Stevenson wrote:
> Gentlemen,
> MPM www.mpm1.com in Wichita is always open for a visit from anyone. We
> now have another place - Specialty Fabrication www.specialtfab.com is also
> open for a visit. I will have both places set up for LinuxCNC related
> development and play during the week
Stuart Stevenson wrote:
> tongue in cheek/
> if you want exposure think IMTS
> /tongue in cheek
>
Some of the guys in our shop at work go there every couple years. They have
that "deer in the headlights" look for a few weeks after. Probably cost
my entire
income for the whole year to set up
well then I guess there are 4 groups, i like to refer to the fourth as
the 3 percenters, 3 percent of the population started the american
adventure in the face of adversity and the spirit of freedom. This is
the innovative non stop juggernaut that keeps the world running, these
people are true lead
On 10/19/2012 02:31 AM, Bruce Layne wrote:
> On 10/18/2012 10:28 PM, Jon Elson wrote:
>> jeremy youngs wrote:
>>> so make the file yourself
>>>
>> No, that's the idea. Unless the file has some kind of encrypted code
>> authorized by the manufacturer of the printer in collaboration with the CA
On 10/19/2012 10:15 AM, Dave Caroline wrote:
> On Fri, Oct 19, 2012 at 3:02 PM, andy pugh wrote:
>
>> On 19 October 2012 13:16, Stuart Stevenson wrote:
>>
>>
>>>MPM www.mpm1.com in Wichita is always open for a visit from anyone. We
>>> now have another place - Specialty Fabrication
The north side. She has an apartment on Wisconsin Ave in Chevy Chase,
MD. Technically, a block or two outside of DC.
It is a nice area, but a little crowded.
You can waste a lot of time sitting in traffic if you are not careful.
Dave
On 10/19/2012 8:26 AM, Mark Wendt wrote:
> On Thu, Oct 18
don't you have access to one and a crew? ;)
I went to one of the previous linuxcnc get-togethers at mpm. Very
cool! Lots of eye candy. Stuart is awesome!
sam
On 10/19/2012 9:02 AM, andy pugh wrote:
> On 19 October 2012 13:16, Stuart Stevenson wrote:
>
>>MPM www.mpm1.com in Wichita is a
On Fri, Oct 19, 2012 at 3:02 PM, andy pugh wrote:
> On 19 October 2012 13:16, Stuart Stevenson wrote:
>
>> MPM www.mpm1.com in Wichita is always open for a visit from anyone. We
>> now have another place - Specialty Fabrication www.specialtfab.com is also
>> open for a visit. I will have both p
On 19 October 2012 13:16, Stuart Stevenson wrote:
> MPM www.mpm1.com in Wichita is always open for a visit from anyone. We
> now have another place - Specialty Fabrication www.specialtfab.com is also
> open for a visit. I will have both places set up for LinuxCNC related
> development and play
On 18 October 2012 19:07, Mark Cason wrote:
> http://www.newscientist.com/blogs/onepercent/2012/10/patent-could-shackle-3d-printers-drm.html
In principle I am not against the underlying idea here.
We may well move to a situation in the future where rather than
shipping objects we ship the files
On Thu, Oct 18, 2012 at 2:22 PM, Dave wrote:
> I agree that the fairground building in York is almost perfect for that
> show, but like Ron said it really lacks rooms for classes. The other
> buildings on the grounds are some distance from the main venue building.
>
> I recently drove across the
Gentlemen,
MPM www.mpm1.com in Wichita is always open for a visit from anyone. We
now have another place - Specialty Fabrication www.specialtfab.com is also
open for a visit. I will have both places set up for LinuxCNC related
development and play during the week of June 17, 2013. Set aside Monda
On 10/18/2012 10:28 PM, Jon Elson wrote:
> jeremy youngs wrote:
>> so make the file yourself
>>
> No, that's the idea. Unless the file has some kind of encrypted code
> authorized by the manufacturer of the printer in collaboration with the CAM
> system, the
> printer will refuse to print it
30 matches
Mail list logo
