wrote:
This is my first time using sserial on the 7i80. I am not sure
what
the
modes are all about and I could not find any reference to help me
understand them
Any links for reading ?
>>>
>>> dmesg :-)
>
>
>dmesg only lists kernel messages, but uspa
>On 19 March 2015 at 17:45, Marius Liebenberg
>wrote:
>> This is my first time using sserial on the 7i80. I am not sure what
>>the
>> modes are all about and I could not find any reference to help me
>> understand them
>>
>> Any links for reading
This is my first time using sserial on the 7i80. I am not sure what the
modes are all about and I could not find any reference to help me
understand them
Any links for reading ?
-
Regards / Groete
Marius D. Liebenberg
+27 82 698 3251
+27 12 746 6064
Thanks Peter, I got it going. Now trying to sort out the sserial stuff
-- Original Message --
From: "Peter C. Wallace"
To: "Marius Liebenberg" ; "Enhanced Machine
Controller (EMC)"
Sent: 2015-03-19 15:56:44
Subject: Re: [Emc-users] Mesa 7i80 programming
Thanks Michael
As I said, something stupid :)
>Use --write instead of --program
>--write is for writing flash (like in 7i80) and --program is to
>directly write FPGA (like in 5i20)
>
>Michael
>
>
>Dnia 19-03-2015 o godz. 8:22 Marius Liebenberg napisał(a):
>> Hi
l me to do
something that I cannot achieve.
-
Regards / Groete
Marius D. Liebenberg
+27 82 698 3251
+27 12 746 6064
--
Dive into the World of Parallel Programming The Go Parallel Website, sponsore
Explained at
>http://linuxcnc.org/docs/html/gcode/overview.html#sec:messages
>
>debug being a special case of msg
As I thought but there must be a problem with my stuff cause I dont see
any message from the Gcode.
>
>Dave Caroline
>
>On 17/03/2015, Marius Liebenberg wro
Can someone please tell me where does the debug statement in Gcode
print its output?
-
Regards / Groete
Marius D. Liebenberg
+27 82 698 3251
+27 12 746 6064
--
Dive into the World of
look deeper at the receive procedure to see if it
actually waits for a packet or just goes on without waiting. It seems
there is no timeout or delay.
-- Original Message --
From: "Peter C. Wallace"
To: "Marius Liebenberg" ; "Enhanced Machine
Controller (EMC)&qu
-- Original Message --
From: "andy pugh"
To: "Marius Liebenberg" ; "Enhanced Machine
Controller (EMC)"
Sent: 2015-03-16 18:42:15
Subject: Re: [Emc-users] Mesa 7i8- hal load string
>On 16 March 2015 at 16:23, Marius Liebenberg
>wrote:
>> M
I got that one right but was wondering about the config string of hm2
-- Original Message --
From: "andy pugh"
To: "Marius Liebenberg" ; "Enhanced Machine
Controller (EMC)"
Sent: 2015-03-16 18:39:10
Subject: Re: [Emc-users] Mesa 7i8- hal load string
>
"Enhanced Machine Controller (EMC)"
Sent: 2015-03-16 16:53:07
Subject: Re: [Emc-users] Mesa 7i8- hal load string
>On Mon, 16 Mar 2015, Marius Liebenberg wrote:
>
>> Date: Mon, 16 Mar 2015 07:19:38 +
>> From: Marius Liebenberg
>> To: "Enhanced Mach
.
-
Regards / Groete
Marius D. Liebenberg
+27 82 698 3251
+27 12 746 6064
--
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for
n.
>If you run linuxcnc debian iso you have mesaflash package available.
>If not use latest from git: www.github.com/micges/mesaflash
>
>Dnia 15-03-2015 o godz. 12:23 Marius Liebenberg napisał(a):
>>Tried both mesaflash and mesaflash3 downloaded from the mesa
>>website
Machine Controller"
Sent: 2015-03-15 12:53:02
Subject: [Emc-users] Odp: Mesaflash --set not recognized
>What mesaflash version?
>
>Dnia 15-03-2015 o godz. 11:21 Marius Liebenberg napisał(a):
>> I am trying to change the ip of my 7i80 but I get "unrecognised
>>option
53:02
Subject: [Emc-users] Odp: Mesaflash --set not recognized
>What mesaflash version?
>
>Dnia 15-03-2015 o godz. 11:21 Marius Liebenberg napisał(a):
>> I am trying to change the ip of my 7i80 but I get "unrecognised
>>option
>> --set". My string is ./me
I am trying to change the ip of my 7i80 but I get "unrecognised option
--set". My string is ./mesaflash --device 7i80 --set ip=10.10.10.10 as
per the manual.
Any thoughts please.
-
Regards / Groete
Marius D. Liebenberg
+27 82 698 3251
+27 1
Ah thanks Andy. I installed all kinds of Glade stuff but missed the -gtk
stuff. I will report back
-- Original Message --
From: "andy pugh"
To: "Marius Liebenberg" ; "Enhanced Machine
Controller (EMC)"
Sent: 2015-03-13 18:39:13
Subject: Re: [Emc-use
What about following these instructions:
http://www.linuxcnc.org/docs/2.7/html/getting-started/index.html#_alternate_install_methods
?
On 2015.03.13 13:01, Marius Liebenberg wrote:
> I installed a fresh Debian distro from the debian netinstall ISO. Now I
> am trying to install LCNC. I
Anything that uses Glade or Gladevcp does not load here???
-- Original Message --
From: "sam sokolik"
To: "Marius Liebenberg" ; "Enhanced Machine
Controller (EMC)"
Sent: 2015-03-13 18:29:32
Subject: Re: [Emc-users] Gmoccapy on Debian
>Gmoccapy loads
Can I expect all lcnc features to run on Debian? Has anyone tested
Gmoccapy on Debian?
-
Regards / Groete
Marius D. Liebenberg
+27 82 698 3251
+27 12 746 6064
--
Dive into the World of
.
-- Original Message --
From: "sam sokolik"
To: "Marius Liebenberg" ; "Enhanced Machine
Controller (EMC)"
Sent: 2015-03-13 18:01:54
Subject: Re: [Emc-users] Ethernet!
>I am pretty sure I started with the wheezy linuxcnc iso.
>
>sam
>
>O
Hi Sam
What distro are you running on?
-- Original Message --
From: "sam sokolik"
To: "Enhanced Machine Controller (EMC)"
Sent: 2015-03-13 16:52:52
Subject: [Emc-users] Ethernet!
>I still cannot believe that it is possible. I have been testing 2.7+
>uspace for a while now. It defiantly
Next time, I promise :)
-- Original Message --
From: "andy pugh"
To: "Marius Liebenberg" ; "Enhanced Machine
Controller (EMC)"
Sent: 2015-03-13 14:31:11
Subject: Re: [Emc-users] Installing Linuxcnc on fresh Debian
>On 13 March 2015 at 12:26, Ma
I normally install from source only. It is the only way I know how to
:(
-- Original Message --
From: "andy pugh"
To: "Marius Liebenberg" ; "Enhanced Machine
Controller (EMC)"
Sent: 2015-03-13 14:20:21
Subject: Re: [Emc-users] Installing Linuxcnc on f
find a repository.
Peter did give some instruction earlier but he assumed that I had the
basics installed already.
-
Regards / Groete
Marius D. Liebenberg
+27 82 698 3251
+27 12 746 6064
> BTW heres approximately whats needed to make a current preemt-rt
> kernel
>
> cd ~
> mkdir rtlinux
> cd rtlinux
> wget
>ftp://ftp.kernel.org/pub/linux/kernel/v3.x/linux-3.18.9.tar.xz
> wget
>
>
>https://www.kernel.org/pub/linux/ker
-- Original Message --
From: "Gerhard Pircher"
To: "Marius Liebenberg" ; "Enhanced Machine
Controller (EMC)"
Sent: 2015-03-12 10:19:29
Subject: Re: [Emc-users] Best way to get Debian
>Am 2015-03-12 um 07:10 schrieb Marius Liebenberg:
>>
>&
-- Original Message --
From: "Sebastian Kuzminsky"
To: "Enhanced Machine Controller (EMC)"
Sent: 2015-03-11 16:12:08
Subject: Re: [Emc-users] Best way to get Debian
>On 03/11/2015 07:58 AM, andy pugh wrote:
>> On 11 March 2015 at 13:52, Marius Liebenber
-- Original Message --
From: "Sebastian Kuzminsky"
To: "Enhanced Machine Controller (EMC)"
Sent: 2015-03-11 16:12:08
Subject: Re: [Emc-users] Best way to get Debian
>On 03/11/2015 07:58 AM, andy pugh wrote:
>> On 11 March 2015 at 13:52, Marius Liebenber
>BTW heres approximately whats needed to make a current preemt-rt kernel
>
>cd ~
>mkdir rtlinux
>cd rtlinux
>wget ftp://ftp.kernel.org/pub/linux/kernel/v3.x/linux-3.18.9.tar.xz
>wget
>https://www.kernel.org/pub/linux/kernel/projects/rt/3.18/patch-3.18.9-rt4.patch.gz
>tar -xpf linux-3.18.9.tar.xz
I opted for Ubuntu 12.04 in the end. I will go through the hassle of
installing the Xenomai kernel and then I will try the uspace stuff.
Debian will not get my vote for a long time to come or until I am
forced.
-- Original Message --
From: "Marius Alksnys"
To:
What about installing it from internet? I tried this and installation
was really quick for me.
https://www.debian.org/distrib/netinst
On 2015.03.11 09:42, Marius Liebenberg wrote:
> I am trying to download Debian but every site has 65 CD images. What is
> the recommended way to get Debia
I am trying to download Debian but every site has 65 CD images. What is
the recommended way to get Debian from scratch and where is the best
site to get it?
-
Regards / Groete
Marius D. Liebenberg
+27 82 698 3251
+27 12 746 6064
I am trying to make Dell E2014T touchscreen work with LinuxCNC. I tried
Debian Wheezy and Ubuntu 10.04. No success with touch yet. While,
interestingly, it works with Machinekit on BeagleBone Black out of the
box. What is made different in those distributions regarding this
touchscreen?
Info f
Thank you all for the answers. Probably I will stay at classic
interfaces for a while.
On 03/10/2015 08:17 AM, Karlsson & Wang wrote:
> There is a need for a special device for ethercat and there are some
> development while the old device where developed long time ago.
>
-
What is the current state and achievements of EtherCAT servo
control from LinuxCNC?
Is it a good choice for current and future projects?
What servo drives to look at in EU?
I found that .4 to .7 kW Delta ASDA-A2 with EtherCAT costs 70 EUR
more than classic IO model. I understand this as a marke
-- Original Message --
From: "Sebastian Kuzminsky"
To: "Marius Liebenberg" ; "Enhanced Machine
Controller (EMC)"
Sent: 2015-03-09 17:05:18
Subject: Re: [Emc-users] Axis starts up in Auto mode
>On 3/9/15 8:58 AM, Marius Liebenberg wrote:
>>I do
reason why one
would want to be in "Auto" mode before the machine is properly
conditioned.
-- Original Message --
From: "Sebastian Kuzminsky"
To: "Marius Liebenberg" ; "Enhanced Machine
Controller (EMC)"
Sent: 2015-03-09 16:44:13
Subject
Is it a bug or by design that Axis starts up in auto mode even with the
machine and emergency off?
-
Regards / Groete
Marius D. Liebenberg
+27 82 698 3251
+27 12 746 6064
--
Dive into the
Tomas
I found the if the step pulse width is very small it could be a problem
at low speeds. Try and make it a bit bigger and see what happens.
-- Original Message --
From: "Tomaz T."
To: "emc-users@lists.sourceforge.net"
Sent: 2015-03-03 18:27:50
Subject: [Emc-users] stepper lose ste
-- Original Message --
From: "Peter C. Wallace"
To: "Marius Liebenberg" ; "Enhanced Machine
Controller (EMC)"
Sent: 2015-02-26 17:13:54
Subject: Re: [Emc-users] hm2_eth driver missing
>On Thu, 26 Feb 2015, Marius Liebenberg wrote:
>
>>Da
Am I right to say that I cannot run this implementation on Ubuntu 10.04?
I have to move to Debian?
-- Original Message --
From: "sam sokolik"
To: "Marius Liebenberg" ; "Enhanced Machine
Controller (EMC)"
Sent: 2015-02-26 16:36:34
Subject: Re: [Emc-users
configurations for linuxcnc at compile
time?
I have compiled linuxcnc a thousand times but I must say that I never
had any reason to look for another config so I am a bit ignorant here.
-- Original Message --
From: "Peter C. Wallace"
To: "Marius Liebenberg" ; "Enhanced
I just did a fresh pull and compiled from source. There are no hm2_eth
drivers anywhere that I can find. The firmware for 7i80 is not under the
lib/firmware directory either.
How do I go about to get the complete source to build from?
-
Regards / Groete
Marius D
Hi Seb
I am compiling from git. I am 2.8.0~pre1 at the moment.
-- Original Message --
From: "Sebastian Kuzminsky"
To: "Marius Liebenberg" ; "Enhanced Machine
Controller (EMC)"
Sent: 2015-02-25 22:46:29
Subject: Re: [Emc-users] Mesa 7i80 on master
&
I agree to Kirk.
Also consider BeagleBone and Machinekit. BBB has several ADC channels
already. I think it should be easy to use its SPI in user space too.
There are some items from my collection to watch:
http://r.ebay.com/TFtcVt
And some thoughts, found on web-search about serial interfaces and
;
Sent: 2015-02-23 23:57:59
Subject: Re: [Emc-users] Mesa configuration
>On Mon, 23 Feb 2015, Marius Liebenberg wrote:
>
>> Date: Mon, 23 Feb 2015 21:10:51 +
>> From: Marius Liebenberg
>> To: "Enhanced Machine Controller (EMC)"
>>
>> Subjec
.
-
Regards / Groete
Marius D. Liebenberg
+27 82 698 3251
+27 12 746 6064
--
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media
>On Mon, 23 Feb 2015, Marius Liebenberg wrote:
>
>> Date: Mon, 23 Feb 2015 21:10:51 +
>> From: Marius Liebenberg
>> To: "Enhanced Machine Controller (EMC)"
>>
>> Subject: [Emc-users] Mesa configuration
>>
>> I have a 7i80 that h
I have a 7i80 that has to connect to a 7i44. The 7i44 connects to a 7i70
and 7i71.
I am trying to setup the card but I cannot find a bit file for this
combination. Does anyone know how I go about setting up this
configuration please?
-
Regards / Groete
Marius D
A big thank you to all they guys working on improving the software. And
all without remuneration.
-- Original Message --
From: "Sebastian Kuzminsky"
To: "Enhanced Machine Controller (EMC)"
Sent: 2015-02-20 02:31:07
Subject: [Emc-users] LinuxCNC 2.6.6
>I just released LinuxCNC 2.6.6, t
Hi Andy
I used to but no more. I get no emails at all from the forum. I tried to
see if there was a setting on my profile but nothing. It is an automatic
thing not so? If you are subscribed to a thread you get the
notification.
-- Original Message --
From: "andy pugh"
T
Does anyone know who the forum moderator might be? I am not getting post
notifications any more
-
Regards / Groete
Marius D. Liebenberg
+27 82 698 3251
+27 12 746 6064
.
--
Download BIRT
I am sure that they will release the controller code at some time. There
is no real money to be made from the controller. It just means that they
sell their machines easier. I convert machines and build new machines
and I do not charge for the software. I do charge for my time to set it
up. The
Now that is super cool :)
-- Original Message --
From: "andy pugh"
To: "Enhanced Machine Controller (EMC)"
Sent: 2015-02-12 12:15:14
Subject: [Emc-users] Super-simple linear motor
>http://youtu.be/J9b0J29OzAU
>
>I have to try this.
>
>--
>atp
>If you can't fix it, you don't own it.
>ht
Viesturs,
I had the same issue as you do with Plasma and THCAD. I contacted local
Plasma source service guy, who advised me to take a signal from the
source before high frequency generator. Another suggestion was to take
cheapest multimeter, connect it to this point, while set at HV DC. If it
Viesturs
It is also wise sometimes to have an input filter. Have a look at what I
attached.
-- Original Message --
From: "Viesturs Lācis"
To: "Enhanced Machine Controller (EMC)"
Sent: 2015-01-31 11:59:17
Subject: [Emc-users] How to THC?
Hello!
I have Jasic 100 A plasma source
-- Original Message --
From: "andy pugh"
To: "Marius Liebenberg" ; "Enhanced Machine
Controller (EMC)"
Sent: 2015-01-30 16:48:42
Subject: Re: [Emc-users] BLDC Hal component
>On 30 January 2015 at 14:41, Marius Liebenberg
>wrote:
>
>&g
h resolvers looks like a good candidate for my brushless
>Driver.
>We are making very good progress at the moment.
>https://github.com/rene-dev/stmbl
>If anyone is interested in PCBs, let me know, I will order some in a
>few weeks.
>
>Rene
>
>On 30 Jan 2015, at 15:48, and
-- Original Message --
From: "Belli Button"
To: "'Marius Liebenberg'" ; "'Enhanced Machine
Controller (EMC)'"
Sent: 2015-01-30 16:02:49
Subject: RE: [Emc-users] BLDC Hal component
>Maak 'n lat vir jou eie gat?
>
It's
-- Original Message --
From: "andy pugh"
To: "Marius Liebenberg"
Cc: "Enhanced Machine Controller (EMC)"
Sent: 2015-01-30 15:57:43
Subject: Re: Re[6]: [Emc-users] BLDC Hal component
>On 30 January 2015 at 13:47, Marius Liebenberg
>wrote:
I have a feeling that these have resolver and hall sensors as there is
huge number of wires on the plug. More that what a resolver will need.
-- Original Message --
From: "andy pugh"
To: "Marius Liebenberg"
Cc: "Enhanced Machine Controller (EMC)"
Sent: 2
-- Original Message --
From: "andy pugh"
To: "Marius Liebenberg"
Cc: "Enhanced Machine Controller (EMC)"
Sent: 2015-01-30 15:34:16
Subject: Re: Re[4]: [Emc-users] BLDC Hal component
>On 30 January 2015 at 13:16, Marius Liebenberg
>wrote:
>
ide. Thanks for
all the great info. I have a feeling though that I will ask some more
questions on the BLDC component in the near future.
-- Original Message --
From: "andy pugh"
To: "Marius Liebenberg"
Cc: "Enhanced Machine Controller (EMC)"
Sent: 2015-
-- Original Message --
From: "andy pugh"
To: "Marius Liebenberg" ; "Enhanced Machine
Controller (EMC)"
Sent: 2015-01-30 14:09:39
Subject: Re: [Emc-users] BLDC Hal component
>> I have Lafert motors and another make of what I am told are BLDC
&
-- Original Message --
From: "andy pugh"
To: "Marius Liebenberg" ; "Enhanced Machine
Controller (EMC)"
Sent: 2015-01-30 13:10:14
Subject: Re: [Emc-users] BLDC Hal component
>On 30 January 2015 at 10:40, Marius Liebenberg
>wrote:
>>I
If the parport is not the best option, what would you suggest? One
obviously is Mesa but are there others that you know of?
-- Original Message --
From: "andy pugh"
To: "Marius Liebenberg" ; "Enhanced Machine
Controller (EMC)"
Sent: 2015-01-30 12:14:43
Will the parport be fast enough for this driver or does one need special
hardware? If so, what is recommended?
-
Regards / Groete
Marius D. Liebenberg
+27 82 698 3251
+27 12 746 6064
Peter
Do I understand this correctly. One can rectify the mains with a bridge
and then chop the voltage with a fet turning it off when the cap is
charged to a level. The fet is in series with the load. The fet is
turned on during every zero crossing. What happens when the fet turns of
is there
same factory and my exerience with them
has been very good. Some of them does have a fuse on the pcb. I did
break one drive when I unplugged the motor while the drive was still
under power.
--
Regards /Groete
M
I have not seen a message since the 12th. Is something broken or was I
left behind?
--
Regards /Groete
Marius D. Liebenberg
+27 82 698 3251
+27 12 743 6064
QQ 1767394877
--
New Year. New Location. New Benefits. New
On 2015-01-12 17:33, andy pugh wrote:
> On 12 January 2015 at 14:58, Marius Liebenberg wrote:
>
>> Its not the motor type that is problematic but rather the control. I am
>> in agreement that one could control the servo just as well if not
>> better, it has just not been
On 2015-01-12 16:42, andy pugh wrote:
> On 12 January 2015 at 14:33, Marius Liebenberg wrote:
>> he general consensus is that you dont use servos on the Z axis of a plasma.
> I am not part of that consensus. I see absolutely no reason to prefer
> any motor type over another in t
sorry there are some words missing. This is what I meant to say.
The general consensus is that you dont use servos on the Z axis of a plasma.
On 2015-01-12 16:22, Marius Liebenberg wrote:
> Short reply is - the THCUD does not work for servo loops but is designed
> for stepper systems.
h.
> Higher redundancy.Lower latency.Increased capacity.Completely compliant.
> vanity: www.gigenet.com
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
--
achine.
>
> Nicklas Karlsson
>
>
>
>
> On Tue, 06 Jan 2015 19:09:05 +0200
> Marius Liebenberg wrote:
>
>> Do you have the STM32 working with Hostmot yet? I would like to have a
>> look at the code if I might.
>>
>> On 2015-01-06 18:53, Nicklas Karlss
nd I would appreciate any participation :)
>>
>> udpio and Arduino
>> <http://www.linuxcnc.org/index.php/english/forum/24-hal-components/28745-io-interface-with-arduino-over-ethernet>
>>
>>
>>
ting is required and I would appreciate any participation :)
>>
>> udpio and Arduino
>> <http://www.linuxcnc.org/index.php/english/forum/24-hal-components/28745-io-interface-with-arduino-over-ethernet>
>>
>>
>> --
>
ish/forum/24-hal-components/28745-io-interface-with-arduino-over-ethernet>
--
Regards /Groete
Marius D. Liebenberg
+27 82 698 3251
+27 12 743 6064
QQ 1767394877
--
Dive into the World of Parallel Programming! The Go Pa
gs to news, videos, case studies, tutorials and more. Take a
> look and join the conversation now. http://goparallel.sourceforge.net
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.ne
billion-dollar corporations, FREE
> http://pubads.g.doubleclick.net/gampad/clk?id=164703151&iu=/4140/ostg.clktrk
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
____
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
--
Regards /Groete
Marius D. Liebenberg
+27 82 698 3251
+27 12 743 6064
QQ 1767394877
--
re Get technology previously reserved for
>> billion-dollar corporations, FREE
>> http://pubads.g.doubleclick.net/gampad/clk?id=164703151&iu=/4140/ostg.
>> clktrk ___
>> Emc-users mailing list
>> Emc-users@lists.sou
On 2014-12-14 21:30, Sebastian Kuzminsky wrote:
> On 12/14/2014 08:57 AM, Marius Liebenberg wrote:
>> Is there a way to get the machine back to manual mode from within a sub
>> routine. I would like to go back to manual mode after I used LatheMacro
>> or NGCGUI.
> There
Hi All
Is there a way to get the machine back to manual mode from within a sub
routine. I would like to go back to manual mode after I used LatheMacro
or NGCGUI.
--
Regards /Groete
Marius D. Liebenberg
+27 82 698 3251
+27 12 743 6064
QQ 1767394877
hat it will not work as well a servo drive but I might be
wrong about this.
> and i will use PIN--ENAO -- to drive -motor drive (+/- 5 V DC)
>
> and signals from ac servo motor encoder directly connect to 7i33 board
> a, a-, b, b-
> ?
> thank you
> aram
>
>
> On Sat, De
rk
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
--
Regards /Groete
Marius D. Liebenberg
+27 82 698 3251
+27 12 743 6064
QQ 1767394877
eviously reserved for billion-dollar corporations, FREE
> http://pubads.g.doubleclick.net/gampad/clk?id=164703151&iu=/4140/ostg.clktrk
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lis
18:16, Roland Jollivet wrote:
> Hi Marius
>
> I f you don't have an aversion to M$, then have a look at Roborealm.com .
> It's a very versatile program, and has many interfacing options. You could
> run it on a second pc and have a serial link to process commands.
>
On 2014-12-05 14:17, andy pugh wrote:
> On 5 December 2014 at 11:59, Marius Liebenberg wrote:
>> A clever solution. What is the tool table limit?
> 56 tools at the moment.
>
That might not suffice. I had in mind to compare the component to a
reference image in a library and the
mmand()
>
> {opencv magic}
>
> c.tool_offset(toolno, z_offset, x_offset, diameter, frontangle,
> backangle, orientation)
>
> Then the G-code could issue a G43 and a second move to the original location.
A clever solution. What is the tool table limit?
--
Regards /Gr
Actuate! Instantly Supercharge Your Business Reports and Dashboards
> with Interactivity, Sharing, Native Excel Exports, App Integration & more
> Get technology previously reserved for billion-dollar corporations, FREE
> http://pubads.g.doubleclick.net/gampad/clk?id=164703151&iu=/4140/
Hi, Alex, hello Andy,
please read my answers inline.
On 2014.12.03 16:21, alex chiosso wrote:
> Hi Marius.
> Is the hal pins naming your problem ?
no, hal pin naming is not a problem.
> If it is maybe it is a no_problem .
> I mean because you can freely name the hal widgets that crea
t; are quoting it in.
>
--
Regards /Groete
Marius D. Liebenberg
+27 82 698 3251
+27 12 743 6064
QQ 1767394877
--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business
cifically. 1500 hours doesn't seem very long,
>
--
Regards /Groete
Marius D. Liebenberg
+27 82 698 3251
+27 12 743 6064
QQ 1767394877
--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
Could someone point me the direction how to load three sub-panels from
the same glade file into one panel, using hbox or similar.
The result should be three identical sub-panels with hal pins like
myvcp-a.some-in, myvcp-b.some-in, myvcp-c.some-in and so on.
Furthermore, three identical instances
ottle of sweet wine will keep you
warmed up on a cold winters night. Its the anti-freeze :)
--
Regards /Groete
Marius D. Liebenberg
+27 82 698 3251
+27 12 743 6064
QQ 1767394877
--
Download BIRT iHub F-Type - The Fr
clk?id=157005751&iu=/4140/ostg.clktrk
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
--
Regards /Groete
Marius D.
How to avoid opening MDI tab in axis after clicking a button in gladevcp
with mdi action?
--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and
301 - 400 of 838 matches
Mail list logo