B 3.0 adaptor. I wonder, if I used
that as the target, if it would boot and install onto itself...
John
> -Original Message-
> From: Gregg Eshelman via Emc-users [mailto:emc-users@lists.sourceforge.net]
> Sent: May-09-23 6:34 PM
> To: Enhanced Machine Controller (EMC)
> C
There will be a meeting in stuttgart again. We currently looking for a date.
https://nuudel.digitalcourage.de/ZBnmKxmcELW9Nd8C
Rene
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
#x27;t have a sewing machine to lean on ;-)
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
s the same as with any new design, you have to make some
prototypes and measure them and likey redesign them a few times. This is why
people usually copy existing proven designs.
_______
Emc-users mailing list
Emc-users@lists.sourceforge
t;
> (and it was actually WW1, the article is from1916)
>
> --
> atp
> "A motorcycle is a bicycle with a pandemonium attachment and is
> designed for the especial use of mechanical geniuses, daredevils and
> lunatics."
> — George Fitch, Atlanta Constitution Newsp
ust go there and update to 2.8.4? Or am I missing something
> else in settings? I do not remember having this issue last time I was
> there sometime last year and the machine is around 3 years old.
>
> Viesturs
>
>
> _______
>
was much stronger than
the original part.
Alan
> From: "John Dammeyer"
> Subject: Re: [Emc-users] Drilling holes in the back of a stepper motor
> Date: June 25, 2023 at 1:19:01 AM CDT
> To: "'Enhanced Machine Controller \(EMC\)'"
>
>
> Some
it's over $100. So I can take the risk and drill holes in the
back. Or get creative with other approaches.
John
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
fine but, if I correct the connections Step+ to Pulse+, Step-
to Pulse-, Dir+ to Dir+ and Dir- to Dir- what will happen. I don’t really want
to break something that works.
Thanks in Advance,
Alan
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
ts maddening to see an .stl that needs fixed, and I've not
found anything that can convert an .stl back into something that can be
edited in openscad. So I wind up about 95% of the time, using the image
as a guide to compose something that looks like it well enough to work.
_
le to retain
the interfaces to the closed source parts.
On Tuesday, July 4, 2023 at 11:34:55 AM MDT, gene heskett
wrote:
On 7/4/23 08:03, Gregg Eshelman via Emc-users wrote:
> Caligari trueSpace can import STL and it can save to a wide range of formats.
> If you want to
This one has direct download links https://united3dartists.com/
On Tuesday, July 4, 2023 at 11:44:50 AM MDT, gene heskett
wrote:
On 7/4/23 08:03, Gregg Eshelman via Emc-users wrote:
> Caligari trueSpace can import STL and it can save to a wide range of formats.
No thanks for the l
recall why.
LinuxCNC community people seem to really like it,
TIA
tomp
On 7/5/23 21:44, gene heskett wrote:
> On 7/5/23 06:50, Gregg Eshelman via Emc-users wrote:
>>
>> This one has direct download links https://united3dartists.com/
>>
> That appears to be a windows pr
Binary data
pipe_axis_rotary_G93.ngc
Description: Binary data
pipe_axis_rotary_G94.ngc
Description: Binary data
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Meeting will be 6-8 October
On 19.05.23 16:12, Rene Hopf via Emc-users wrote:
There will be a meeting in stuttgart again. We currently looking for a
date.
https://nuudel.digitalcourage.de/ZBnmKxmcELW9Nd8C
Rene
___
Emc-users mailing list
Emc
look elsewhere?
>
>
>
>
> _______
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
___________
Emc-users mailing list
Emc-users@lists.sourceforge.net
ht
ptab.xml
> -- end edit your .ini ---
>
> Then run LincCBC with yoour config and see if the tab appears
>
> AND if the pyvcp widgets are on the tab or just in a free floationg pane.
>
>
> There is no .hal file or
e tool.tbl?
Thanks,
Alan
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Sorry, stupid problem. I had a thumb drive in the machine and I was looking at
the files on the thumb drive.
The files on the machine had been overwritten when I installed 2.9.0Pre. I
copied the correct files over and
cured the problem.
> From: Nicklas SB Karlsson
> Subject: Re: [Emc
27;t think that there is any
limit currently.
there still is a limit of 1000. Im currently refactoring the whole tool
management, making it much simpler, and removing all limits.
_______
Emc-users mailing list
Emc-users@lists.sourceforge
tic charge.
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
Genes Web page <http://geneslinuxbox.net:6309/>
_______
Emc-us
fix the verison misspelling too)
Done.
> ___________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
___
Emc-users mailing list
Emc-users@
hanical geniuses, daredevils and
lunatics."
— George Fitch, Atlanta Constitution Newspaper, 1912
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
________
Newspaper, 1912
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourc
Have you tried: sudo apt --fix-broken install ?
On Tuesday, November 7, 2023 at 09:27:56 AM EST, fxkl47BF--- via Emc-users
wrote:
i have two systems i use to run linuxcnc sim
both are debian 11, bullseye
i installed linuxcnc 2.9 on both and it worked perfectly
last night i ran apt
t with maybe 360 grooves. Then you could wedge a shape (like a tiny
axe head?) into the slot and force the disk to stop on an even degree. You
could use more than one wedge, space them around the disk.
_______
Emc-users mailing list
Emc-users@lists.so
On Friday, December 8, 2023 at 09:28:21 AM MST, fxkl47BF--- via Emc-users
wrote:
i'm trying to find a slicing blade for a 10 inch table saw
a blade that is smooth and sharp, no teeth
for making smooth cuts in foam material and cardboard
i guess if there's no such critter i could
ts
and up so they can be driven at unreal speeds w/o losing home.
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
without turning off power, so there is
no safety concern.
Thanks so much,
Alan
Sent from my iPhone
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
;
> Todd Zuercher
> P. Graham Dunn Inc.
> 630 Henry Street
> Dalton, Ohio 44618
> Phone: (330)828-2105ext. 2031
>
> -Original Message-
> From: Alan Thomason via Emc-users
> Sent: Monday, December 18, 2023 12:01 PM
> To: emc-users@lists.sourceforge.net
That is super helpful, thanks!
Sent from my iPhone
> On Dec 19, 2023, at 6:31 AM, andy pugh wrote:
>
> On Mon, 18 Dec 2023 at 17:05, Alan Thomason via Emc-users
> wrote:
>
>> Is it possible to script in the initial file for the system to switch to
>> Machine
ng to whip or sag much. A benefit that a
short screw will have with tension is zero lash from end play because it won't
have any end play.
On Monday, December 25, 2023 at 05:06:20 PM MST, Linden via Emc-users
wrote:
Hello All,
In the early stages of converting a 13 x 24 inch manual Chin
bends as force is applied, the motor pushes on the
screw one way and the motor mounts in an equal but opposite direction.
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
, a small 24v supply
and the SSR controlled line outlet.
Thanks,
Alan
> From: gene heskett
> Subject: Re: [Emc-users] Damaged an SSR
> Date: December 31, 2023 at 1:42:07 PM CST
> To: emc-users@lists.sourceforge.net
>
>
> On 12/31/23 12:50, condit.alan--- via Emc-users wro
et
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
I go to logout from "newname" it says "logout from cnc"
So, I have clearly missed something, but I don't know what. Help!!!
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
gative towards the lathe chuck.
John
___________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
but it seems difficult to find something that big.
Do you guys recommend any particular brand or source to find such a speed
controller?
Thanks as always.
Leonardo
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net
info. Those might well serve me in case of using the
original DC servos the machine has.
El vie, 9 feb 2024 a las 21:37, Dale Ertley via Emc-users (<
emc-users@lists.sourceforge.net>) escribió:
> I have 4 drives am going to try from Machdrives.com. They use Tuna
> graphical software
my case I have never had to do anything special
to make it work.
whats the error message?
whats the output of ip route?
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
w to treat them.
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
the sellers have no clue, is also another annoying trick to
perform.)
Todd Zuercherm
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: gene heskett
Sent: Sunday, March 17, 2024 8:52 AM
To: emc-users@lists.sourceforge.net
2024 11:18 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Not so slight problem with spindle/tools
[EXTERNAL EMAIL] Be sure links are safe.
Indeed, using drive dog threaded holes. Initially I did think about a flat disc
but cannot see that gives me any better holding strength
on, 18 Mar 2024 at 17:45, gene heskett wrote:
> On 3/18/24 11:28, Todd Zuercher via Emc-users wrote:
> > Gene,
> >
> Well 2 things I've observed since posting that, Todd. the pix is
> identical for a 3 kilohertz version on amazon for about the same price,
> once adjus
, gene heskett wrote:
> >
> > On 3/18/24 18:50, Jon Elson wrote:
> >> On 3/18/24 07:53, Todd Zuercher via Emc-users wrote:
> >>> Gene,
> >>>
> >>> In all honesty I wouldn't mind knowing more about your VFD source you
> say you want black lis
ferred to as TWAT
> tubes back in Nike Hercules tech school in 1977.
>
> Dave
> ex MOS 22L
>
> On Tue, Mar 19, 2024 at 4:35 PM gene heskett wrote:
>
> > On 3/19/24 14:15, Robin Szemeti via Emc-users wrote:
> > > I purchased a couple of large travelling wave tube
ook at what the HAAS was told to do.
Is there a way to translate these files? They are too big to attach but I
can email them if someone knows how to do this.
Thanks
John
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.source
inside it.
https://www.gibbscam.com/en
John
> -Original Message-
> From: Dale Ertley via Emc-users [mailto:emc-users@lists.sourceforge.net]
> Sent: March 21, 2024 7:52 AM
> To: Enhanced Machine Controller (EMC)
> Cc: Dale Ertley
> Subject: Re: [Emc-users] HAAS file
>
&g
M3 in front of the S300.
>
> There are probably other issues too that I haven't found yet.
>
> Thanks
>
> John
>
>
>
>
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourc
2031
-Original Message-
From: John Dammeyer
Sent: Thursday, March 28, 2024 1:35 AM
To: 'Enhanced Machine Controller (EMC)'
Subject: Re: [Emc-users] GibbsCAM machine .pst file.
[EXTERNAL EMAIL] Be sure links are safe.
Oh and I made a mistake. The pst file I have is for a Fadal.
Inc.<http://www.pgrahamdunn.com/index.php>
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Emc-users
Cc: Todd Zuercher
Subject: Re: [Emc-users] 7i84 Trouble?
[EXTERNAL EMAIL] Be sure links are safe.
On Mon, 1 Apr 2024, Todd Zuercher via Emc-users wrote:
> Date: Mon, 1 Apr 2024 20:49:01 +
> From: Todd Zuercher via Emc-users
> To: "Enhanced Machine Controller (EMC)&q
with Linuxcnc not running, and two yellow, and
blinking green with Linuxcnc.
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Todd Zuercher via Emc-users
Sent: Tuesday, April 02, 2024 7:57 AM
To: Peter Wallace ;
Sent: Wednesday, April 10, 2024 7:56 AM
To: Enhanced Machine Controller (EMC)
Subject: [Emc-users] OT: Balluff BRGE1-WSE10 encoder
[EXTERNAL EMAIL] Be sure links are safe.
Hello guys, I hope you're doing well
I'm having problems with a Daewoo Puma 12L lathe to index some tools. The
probl
[3*#]] GE #]
G03 X0 Y[#-[3*#]]R[#-[3*#]]
o ENDIF
o IF [[# - #] GE #]
G03 X[[#-#]*[-1]] Y0 R[#-#]
o ENDIF
# = [#-#]
o ENDWHILE
G0 Z#<_close_Z>
G55
o endsub
Alan
> From: "John Dammeyer" mailto:jo...@autoartisans.com>>
> Subject: [Emc-users
/teaching/fa16_2312/handouts/parametric/ParamGraphs.pdf
for example (p. 2 and 3).
-- Ralph
From: Chris Albertson [albertson.ch...@gmail.com]
Sent: Wednesday, April 10, 2024 10:28 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Carving a spiral
0)828-2105ext. 2031
-Original Message-
From: Leonardo Marsaglia
Sent: Wednesday, April 10, 2024 1:06 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] OT: Balluff BRGE1-WSE10 encoder
[EXTERNAL EMAIL] Be sure links are safe.
Found the main issue. The terminal block in wic
.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Chris Albertson
Sent: Wednesday, April 10, 2024 4:26 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Carving a spiral
[EXTERNAL EMAIL] Be sure links are safe.
> On Apr 10, 2
health. My wife is visting her mom in Tokyo right now.
Maybe when I am older I will talk about the days of manually driven gas cars.
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
can think of
is tool breakage.
Thanks, Billy - aka Connor
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
dunn.com/index.php>
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
n Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Peter Wallace
Sent: Monday, April 15, 2024 3:41 PM
To: Todd Zuercher via Emc-users
Cc: Todd Zuercher
Subject: Re: [Emc-users] Mesa Card Stepgens?
[EXTERNAL EMAIL] Be sure links are saf
etch that to 2 micro-secs if
I don't want an occasional miss, this while driving the lc42 driver.
These drivers all have opto inputs, and need a little longer step on the
less than 5 volt signals.
___________
Emc-users mailing list
Emc-use
gtail into
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: andy pugh
Sent: Wednesday, April 17, 2024 8:47 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Home to index triggers following error
[EXTERNAL EMAIL] Be sure links are safe.
On Wed, 17 Apr 2024 at 12:
r
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Peter Wallace
Sent: Wednesday, April 17, 2024 1:09 PM
To: Todd Zuercher via Emc-users
Cc: Todd Zuercher
Subject: Re: [Emc-users] Home to index triggers following error
fast. Atomic
Energy Canada Limited found that out with the Therac 25.
On Wednesday, April 17, 2024 at 11:04:07 AM MDT, Todd Zuercher via Emc-users
wrote:
Sorry to hijack the thread, but I've had to live with this on a machine that
I'm using cascaded double PID loops on. I have th
se than not at all.
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Chris Albertson
Sent: Wednesday, April 17, 2024 8:51 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Big Tree Tech Re: Mesa Card S
lton, Ohio 44618
Phone: (330)828-2105ext. 2031
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
use and so that
the Cad/Cam portion is easy to work as well.
Thanks, Billy aka Connor
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
I'm unfamiliar with G10 commands or how they would apply to this. I read over
the documentation on them and don't quiet understand how they would work for
this.
On 4/20/24 6:59 AM, andy pugh wrote:
On Sat, 20 Apr 2024 at 02:12, Billy Huddleston via Emc-users
wrote:
> However,
Sorry, That was always hidden behind the UI. I never issued a G10 command. I didn't realize that was the GCode behind it. The Probe Basic makes extensive use of G10 in the
probing routine.
On 4/22/24 5:54 AM, andy pugh wrote:
On Sun, 21 Apr 2024 at 02:33, Billy Huddleston via Emc-
il 30, 2024 12:25 PM
To: Enhanced Machine Controller (EMC)
Subject: [Emc-users] BeagleY-AI
[EXTERNAL EMAIL] Be sure links are safe.
Apparently available in June it looks like this version of the Beagle may well
be a good successor to the original Beagle and MachineKit.
https://www.mouser.c
e
of. Did something significant change in mb2hal between 2.7 and 2.9 that would
require a change to the mb2hal configuration files?
Todd Zuercher
P. Graham Dunn Inc.<http://www.pgrahamdunn.com/index.php>
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
_______
2031
-Original Message-
From: Peter Wallace
Sent: Tuesday, May 07, 2024 4:16 PM
To: Todd Zuercher via Emc-users
Cc: Todd Zuercher
Subject: Re: [Emc-users] Mb2hal 2.9?
[EXTERNAL EMAIL] Be sure links are safe.
On Tue, 7 May 2024, Todd Zuercher via Emc-users wrote:
> Date: Tue, 7 May 20
maximum debugging messages (only in transactions).
INIT_DEBUG=3
Maybe set yours to 3 to get more information?
John
> -Original Message-
> From: Todd Zuercher via Emc-users [mailto:emc-
> us...@lists.sourceforge.net]
> Sent: May 7, 2024 1:29 PM
> To: Peter Wallace; Todd
achine Controller (EMC)
Cc: Todd Zuercher
Subject: Re: [Emc-users] Mb2hal 2.9?
[EXTERNAL EMAIL] Be sure links are safe.
On Wed, 8 May 2024 at 02:15, Todd Zuercher via Emc-users
mailto:emc-users@lists.sourceforge.net>> wrote:
It was already set to 3.
What is your MB2HAL load line?
What doe
rcher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Todd Zuercher via Emc-users
Sent: Wednesday, May 08, 2024 8:13 AM
To: andy pugh ; Enhanced Machine Controller (EMC)
Cc: Todd Zuercher
Subject: Re: [Emc-users] Mb2hal
mission is all I needed to do to get this working as it was
before.
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: gene heskett
Sent: Wednesday, May 08, 2024 12:23 PM
To: emc-users@lists.sourceforge.net
Subject
e, or would it not have any devices in it, or would the
device just not work?
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: gene heskett
Sent: Wednesday, May 08, 2024 12:23 PM
To: emc-users@lists.sourceforg
; does contain Gid: ( 20/ dialout)
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: zz...@seznam.cz
Sent: Wednesday, May 08, 2024 1:45 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Mb2hal 2.
file for offsetting the joint's
position.
Todd Zuercher
P. Graham Dunn Inc.<http://www.pgrahamdunn.com/index.php>
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
___
Emc-users mailing list
Emc-users@lists.sourc
ginal Message-
From: Sam Sokolik
Sent: Friday, May 10, 2024 6:50 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] cloning hard drive
[EXTERNAL EMAIL] Be sure links are safe.
2nd clonezilla.. use it all the time at work.
On Fri, May 10, 2024, 5:42 AM Ed wrote:
> On 5/10/24
problems.
Todd Zuercher
P. Graham Dunn Inc.<http://www.pgrahamdunn.com/index.php>
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
From: andy pugh
Sent: Thursday, May 09, 2024 7:33 PM
To: Enhanced Machine Controller (EMC)
Cc: Todd Zuercher
Subject: Re: [Emc-users] Global Na
ay 10, 2024 3:31 PM
To: Todd Zuercher
Cc: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Global Named Parameter?
[EXTERNAL EMAIL] Be sure links are safe.
On 10 May 2024, at 19:55, Todd Zuercher
mailto:to...@pgrahamdunn.com>> wrote:
Is there a way to bring out a tool of
that would be damaged by this?
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Peter Wallace
Sent: Monday, April 15, 2024 5:09 PM
To: Todd Zuercher
Cc: Todd Zuercher via Emc-users
Subject: RE: [Emc-users] Mesa
Ohio 44618
Phone: (330)828-2105ext. 2031
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Can you run a steel cable through it and tension it? Might stiffen it up some.
-- Ralph
On May 13, 2024 1:46 PM, Todd Zuercher via Emc-users
wrote:
CAUTION: This email originated from outside the Walla Walla University email
system.
Anyone have any brilliant ideas to stiffen a woefully
and cables.
Be safe.
Dale
On Monday, May 13, 2024 at 07:31:34 PM EDT, Ralph Stirling via Emc-users
wrote:
Can you run a steel cable through it and tension it? Might stiffen it up some.
-- Ralph
On May 13, 2024 1:46 PM, Todd Zuercher via Emc-users
wrote:
CAUTION: This email
to each end pulled tight.
Use small turn buckles to tighten the cables over the block on that one
side.You may be able to reduce the mass of the beam with the added stiffness of
the blocks and cables.
Be safe.
Dale
On Monday, May 13, 2024 at 07:31:34 PM EDT, Ralph Stirling via Emc-users
75, Rev. A, Feb. 1973
A triangular tube is more twist and bend resistant than a square, rectangular,
or round tube, and it is lower mass than a square or rectangular tube. Even
less mass with all the bits removed to cut an isogrid.
On Monday, May 13, 2024 at 02:49:51 PM MDT, Todd Zuercher via Em
Ohio 44618
Phone: (330)828-2105ext. 2031
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
lity hardware.
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
2031
-Original Message-
From: Jon Elson
Sent: Wednesday, May 15, 2024 7:20 PM
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Acceleration Settings?
[EXTERNAL EMAIL] Be sure links are safe.
On 5/15/24 12:23, Todd Zuercher via Emc-users wrote:
> I'm trying to figure
, May 14, 2024 9:26 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Beam Stiffening?
[EXTERNAL EMAIL] Be sure links are safe.
I think I fell for the “beam is bending” idea too. It might be. The way to
find out is to measure the beam center with the dial indicator and then
otos.app.goo.gl/yiyW5EA5syhmPgWw7
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Viesturs Lācis
Sent: Tuesday, May 21, 2024 7:03 AM
To: Enhanced Machine Controller (EMC)
Subject: [Emc-users] Tool length prob
y changing the height of the screws.
Todd Zuercher
P. Graham Dunn Inc.<http://www.pgrahamdunn.com/index.php>
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
From: andy pugh
Sent: Tuesday, May 21, 2024 9:11 AM
To: Enhanced Machine Controller (EMC)
Cc: Todd Zuercher
Subject
reet
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
801 - 900 of 914 matches
Mail list logo