https://forum.linuxcnc.org/27-driver-boards/32321-7i90-questions?start=20
What is a non null string ?
Kernel.lig comes back
No such file or director , checked syntax 3 times . I believe it's right .
On Wed, Apr 25, 2018, 11:43 andy pugh wrote:
> On 25 April 2018 at 17:38,
On 25 April 2018 at 17:38, jeremy youngs wrote:
> Is there an error output at the "loadrt hm2_7i90" stage?
>> No errors at all
Is there any output at all? I would expect _something_.
If you are using RTAI then it is possible that you need to look in dmesg.
(Easiest is to
On Wed, Apr 25, 2018, 06:36 andy pugh wrote:
>
> So, basically nothing at all?
> Essentially yes
>
Is there an error output at the "loadrt hm2_7i90" stage?
> No errors at all
>
Did you use the correct ioaddr?
> Triple checked, io is 0x378. I removed my pci epp card as
On 25 April 2018 at 00:28, jeremy youngs wrote:
> Accept component changes gave no effect. Output of path in halcmd at show
> pins is this
> Component pins:
> Owner type dir value name
> Halcmd:
So, basically nothing at all?
Is there an error output at the "loadrt
Tried 2x more, both through pnc and halrun, same results . Thank you
On Tue, Apr 24, 2018, 18:28 jeremy youngs wrote:
> Accept component changes gave no effect. Output of path in halcmd at show
> pins is this
> Component pins:
> Owner type dir value name
> Halcmd:
Accept component changes gave no effect. Output of path in halcmd at show
pins is this
Component pins:
Owner type dir value name
Halcmd:
--
Check out the vibrant tech community on one of the world's most
engaging
On 24 April 2018 at 23:30, jeremy youngs wrote:
> Obviously, lying got me a bit farther along. However, after populating
> pins, x,y,z, spindle encoder, x,y,z, spindle pwm , when I continue with the
> forward button it says I forget to designate pwm or stepper signal for
>
On 24 April 2018 at 20:59, jeremy youngs wrote:
>> Dell optiplex 620 2.8 GHz duo core , 4gb ram , running through the
>> motherboard epp as I had seen a couple post you made on the forum about pci
>> boards being sketchy, although I have had no issues running stepper drives
quot;
> > <emc-users@lists.sourceforge.net>
> > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net
> >
> > Subject: Re: [Emc-users] 7i90 not listed in pnc
>
> Before you change anything on the 7I90,
>
I have no intent
On Tuesday 24 April 2018 15:17:40 jeremy youngs wrote:
> 7i90 zip extracted to public folder. Invocation of mesaflash says no
> program to open it . Tried the mesaflash icon and the mesaflash 3
> icon.
I guess I'm old fashioned. I cd to the directory its in and type
"sudo ./mesaflash"enter.
@lists.sourceforge.net>
Subject: Re: [Emc-users] 7i90 not listed in pnc
Before you change anything on the 7I90,
How do you intend to use the 7I90HD?
What host computer are you planning to use?
7i90 zip extracted to public folder. Invocation of mesaflash says no
program to open it . Tried
7i90 zip extracted to public folder. Invocation of mesaflash says no
program to open it . Tried the mesaflash icon and the mesaflash 3 icon. How
do I know what dependencies are required to run this. V 2.7 11? Installed
--
On Monday 23 April 2018 22:38:21 jeremy youngs wrote:
> Trying to configure this 7i90 .
> Went to pnc config and it is not in the drop down list . Is this the
> first order of business or is there something else I should be trying?
First order of business is probably the mesaflash session. Get,
Trying to configure this 7i90 .
Went to pnc config and it is not in the drop down list . Is this the first
order of business or is there something else I should be trying?
Dell optiplex 620 using motherboard parallel, set to epp in bios. I do have
another epp pci card in computer, just trying to
101 - 114 of 114 matches
Mail list logo