On 20 Jun 2015, at 02:33, Gene Heskett ghesk...@wdtv.com wrote:
I noted that there was only perhaps a fraction of an mm of
clearance at best on 2 sides of the zerk style fitting
Perhaps fit a small-bore copper pipe in the hole and place the fitting
somewhere convenient.
On Sunday 21 June 2015 14:52:18 Andy Pugh wrote:
On 20 Jun 2015, at 02:33, Gene Heskett ghesk...@wdtv.com wrote:
I noted that there was only perhaps a fraction of an mm of
clearance at best on 2 sides of the zerk style fitting
Perhaps fit a small-bore copper pipe in the hole and place
On Saturday 20 June 2015 00:32:17 Jack Coats wrote:
If in the USA, check W.W.Grainger at Grainger.com - not cheap but they
have 'stuff'.
If you can't find it in the online catalog, call the nearest store and
they can help find it.
A search of their online catalog last night didn't show but
On Saturday 20 June 2015 05:30:24 Gene Heskett wrote:
edirect=grease+fitting
incomplete copy/paste.
But it only showed me 4 fittings, 3 in zerk, one in some sort of a
pressure vent cap.
Tried to fine tune it, but was not able to get it to show me the nipple
connector used on a grease gun. So
Greetings;
In the process of doing some trial assemblies of the motor to screw
adaptors, I noted that there was only perhaps a fraction of an mm of
clearance at best on 2 sides of the zerk style fitting installed in the
Y nut, so I backed that adaptor off the nut and made some more
clearance,
Maybe switch to needle style grease fittings?
Best,
Jason
On Fri, Jun 19, 2015 at 8:33 PM, Gene Heskett ghesk...@wdtv.com wrote:
Greetings;
In the process of doing some trial assemblies of the motor to screw
adaptors, I noted that there was only perhaps a fraction of an mm of
clearance at
If in the USA, check W.W.Grainger at Grainger.com - not cheap but they have
'stuff'.
If you can't find it in the online catalog, call the nearest store and they
can help find it.
If you work for a big company, have a business card and they might be able
to get you the 'big company' discount, if
On Friday 19 June 2015 22:03:50 Jason Burton wrote:
Maybe switch to needle style grease fittings?
I thought of that, but when I hit napa looking for a box of those in
metric thread, came up dry. I think its probably a good idea, so the
next time I'm in one of the other car parts stores here,
