On Saturday 11 August 2012 01:43:31 jeremy youngs did opine:
http://groups.yahoo.com/group/jcyoungs76/
As of right now this group is for cac/cam Gcode dump, it is private as
I do not wish to spend my life moderating a group, The only invites i
am offering are here in this list. I am trying
On 11.08.12 02:29, Gene Heskett wrote:
Besides, we have a wiki.linuxcnc.org site, which IMO should be the one
common place to put the routines dumps we would like to share with all
LinuxCNC users.
+1
Content is best placed elsewhere only when we have no general use for it, as I
understand
fellas I asked about this the other day for a reason, and took action
any body can join or form a group for any reason. The opinions express
were that we didnt have a spot for this and it may not be appropriate,
I took action because I believe its worth while Ive kept the group
private and only
On 8/11/2012 9:09 AM, jeremy youngs wrote:
fellas I asked about this the other day for a reason, and took action
any body can join or form a group for any reason. The opinions express
were that we didnt have a spot for this and it may not be appropriate,
I took action because I believe its
thanx kent i kinda needed to hear that, I hope to get to uploading
some more files to it this weekend
--
jeremy youngs
--
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security
On Saturday 11 August 2012 09:23:44 jeremy youngs did opine:
fellas I asked about this the other day for a reason, and took action
any body can join or form a group for any reason. The opinions express
were that we didnt have a spot for this and it may not be appropriate,
I took action
gene I have the same issue at just 36 y/old, I think it comes from the
rough environment i was in as a kid. I am myself capable of inserting
both my feet simultaneously and promptly falling on my keister. I dont
do any board building yet but that sounds like a great program. As to
the link to
On Saturday 11 August 2012 10:58:48 jeremy youngs did opine:
gene I have the same issue at just 36 y/old, I think it comes from the
rough environment i was in as a kid.
I'll blame mine on being an only brat. :)
I am myself capable of inserting
both my feet simultaneously and promptly
On 11.08.12 10:07, Gene Heskett wrote:
On Saturday 11 August 2012 09:23:44 jeremy youngs did opine:
fellas I asked about this the other day for a reason, and took action
any body can join or form a group for any reason. The opinions express
were that we didnt have a spot for this and it
On Saturday 11 August 2012 12:33:50 Erik Christiansen did opine:
On 11.08.12 10:07, Gene Heskett wrote:
On Saturday 11 August 2012 09:23:44 jeremy youngs did opine:
fellas I asked about this the other day for a reason, and took
action any body can join or form a group for any reason. The
well in any event its there now and i agree under one roof would be
great and i have no opposition to that . Basically im really trying to
assemble stuff to help the novice it stems from searching 1.5 hrs for
a nema 34 2d cad file to dimension off of to build a stepper mount, I
realize this isnt
Jeremy Reluctantly I signed up to yahoo this morning after seeing your
post and have just been informed that my request to join your group has
been refused. I would have thought that I would be your target audience,
Linuxcnc user, novice, just built my own machine, trying to learn GCode.
My
your machine looks good john i emailed off list to explain
On Sat, Aug 11, 2012 at 1:40 PM, John Bannister
john-bannis...@talktalk.net wrote:
Jeremy Reluctantly I signed up to yahoo this morning after seeing your
post and have just been informed that my request to join your group has
been
jeremy youngs wrote:
jon I believe any files that will help any of us belong in a spot we
can access them. I wish to compile and organize them. and what your
referencing sounds very much like something that would help the
novice, and I approve.
OK, I will put them up.
Jon
On 08/11/2012 09:09 AM, jeremy youngs wrote:
I also
being the owner and moderator If we wanted to set it up here would
give all the files freely to the organization.
I don't intend this in a mean way, but if you agree to a license, you
are bound by that license. There was a woman who
thank you
On Sat, Aug 11, 2012 at 2:11 PM, Jon Elson el...@pico-systems.com wrote:
jeremy youngs wrote:
jon I believe any files that will help any of us belong in a spot we
can access them. I wish to compile and organize them. and what your
referencing sounds very much like something that
i read through the license agreement and yahoo takes no ownership and
releases rights upon termination of the group.
http://info.yahoo.com/legal/us/yahoo/utos/utos-173.html
line 9 obviously to post on their site you will have conditions and
terms I do not feel these are out of line wth
jeremy youngs wrote:
thank you
On Sat, Aug 11, 2012 at 2:11 PM, Jon Elson el...@pico-systems.com wrote:
jeremy youngs wrote:
jon I believe any files that will help any of us belong in a spot we
can access them. I wish to compile and organize them. and what your
referencing sounds
http://groups.yahoo.com/group/jcyoungs76/
As of right now this group is for cac/cam Gcode dump, it is private as
I do not wish to spend my life moderating a group, The only invites i
am offering are here in this list. I am trying to initially centralize
useful cad cam and gcode files for the
jeremy youngs wrote:
http://groups.yahoo.com/group/jcyoungs76/
As of right now this group is for cac/cam Gcode dump, it is private as
I do not wish to spend my life moderating a group, The only invites i
am offering are here in this list. I am trying to initially centralize
useful cad cam
jon I believe any files that will help any of us belong in a spot we
can access them. I wish to compile and organize them. and what your
referencing sounds very much like something that would help the
novice, and I approve. I think things like that definitely help as not
everyone has access to
)
Subject: Re: [Emc-users] file sharing
back to this op Collectively what do we think of a g code or cad dump?
I searched for 45 min the other day just to find a suitable nema 34
face to use for cad/ cam to build a mount for a stepper it seems a
dump would help this just asking for random comments
, 2012 7:04 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] file sharing
back to this op Collectively what do we think of a g code or cad dump?
I searched for 45 min the other day just to find a suitable nema 34
face to use for cad/ cam to build a mount for a stepper it seems
On Fri, Aug 3, 2012 at 11:16 PM, andy pugh bodge...@gmail.com wrote:
snippage
making engines work ?
My day-job is programming diesel-engine control modules for a motor
manufacturer with a blue, oval, badge.
Ford?
--
atp
back to this op Collectively what do we think of a g code or cad dump?
I searched for 45 min the other day just to find a suitable nema 34
face to use for cad/ cam to build a mount for a stepper it seems a
dump would help this just asking for random comments
On Sat, Aug 4, 2012 at 6:28 AM, Mark
thinking again, Andy i was checking your gmail profile with the cnc
stuff in it and found the pictures of your encoder it occurred to me
that the group may benefit from a gcode file sharing ability and even
cad cam. I was really impressed with the encoder was the wheel made
from circuit board?
On 4 August 2012 04:02, jeremy youngs jcyoung...@gmail.com wrote:
it occurred to me
that the group may benefit from a gcode file sharing ability
I don't think that we have a suitable area for that, so you might have
a point. You can post files to the Wiki (but that might not be
appropriate) or
https://lh3.googleusercontent.com/-T220N7Tiw8E/TwTD78fzoQI/BRM/rJ_xLsUUfC4/w269-h204-n-k/IMG_0272.JPG
this one
Im speculating in england you are programming implements if not Im
very familiar with th 7.3 D.I.T and the 6.0 the 7.3 ran very well and
the 6.0 im not in love with in 04 when it
28 matches
Mail list logo