Gentlemen,
If it hasn't been posted yet the solution to my problem (KINDLY
pointed out by Chris Radek) was I had left out the '=' sign in the
command 'COMP_FILE = joint0.cmp'.
Thank you very much Chris.
If I wasn't so relieved I would be embarrassed beyond belief. As it
is, I am a happy ca
Chris Radek wrote:
> On Tue, Oct 07, 2008 at 08:16:56AM -0500, Stuart Stevenson wrote:
>> Gentlemen,
>> Upon further investigation I am unable to use the lead screw
>> compensation files we collected.
>>I adjusted the scale to minimize the compensation magnitude. This
>> allowed me to machine
On Tue, Oct 07, 2008 at 08:16:56AM -0500, Stuart Stevenson wrote:
> Gentlemen,
> Upon further investigation I am unable to use the lead screw
> compensation files we collected.
>I adjusted the scale to minimize the compensation magnitude. This
> allowed me to machine the test article to a 'pr
Gentlemen,
Upon further investigation I am unable to use the lead screw
compensation files we collected.
I adjusted the scale to minimize the compensation magnitude. This
allowed me to machine the test article to a 'pretty close'
configuration. I have since discovered the lead screw comp is no
Alex,
Thanks for the response.
John,
Now I understand the comment about patience. I had submitted a post,
received a bounced notice and reposted. Then I see the first post was there
also. Sorry.
Just to clarify for me. The way I see it the compensation is interpolated
between points as it looks
ginal Message -
From: "Kirk Wallace" <[EMAIL PROTECTED]>
To: "Enhanced Machine Controller (EMC)"
Sent: Saturday, March 10, 2007 9:14 AM
Subject: Re: [Emc-users] lead screw compensation
>I hope to get cheaper rolled lead screws and use lead screw
>compensation
I hope to get cheaper rolled lead screws and use lead screw compensation
to get ground screw performance on my lathe project, so I will be
watching this thread. Just in case it might help, there is below an
excerpt from:
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Kinematics
On Sat, 2007-03-10 a
Stuart Stevenson wrote:
> Gentlemen,
> I will have a machine running very shortly. I cannot find anything about
> lead screw compensation. How would I implement it?
> thanks
It's 1am here, and I'm about to go to bed. There are others who are a
little more familiar with screwcomp, but if nobody
Gentlemen,
I will have a machine running very shortly. I cannot find anything about
lead screw compensation. How would I implement it?
thanks
Stuart
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net'
Gentlemen,
I am nearing completion of the installation of EMC2 on a small three axis
mill. I will shortly need to implement lead screw compensation. I have been
unable to find much in reference to this. Where would I find out how to
implement this?
thanks
Stuart
--
10 matches
Mail list logo