Open a terminal and type "dmesg" to see what went wrong.
On 2013/06/25 09:01 AM, Gregg Eshelman wrote:
> Just trying to run LinuxCNC to have a look at it and it won't even run. I
> also tried the latency test and nothing at all happens, *nothing*, not even
> an error message. Just got done with
On 25 June 2013 08:01, Gregg Eshelman wrote:
> I get this same fail to run every time.
I think that the problem might be here:
[0.00] Local APIC disabled by BIOS -- you can enable it with "lapic"
[0.00] APIC: disable apic facility
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Troubl
The error is in your log:
[ 216.183331] RTAI[hal]: ERROR, LOCAL APIC CONFIGURED BUT NOT
AVAILABLE/ENABLED.
and a good description (including a fix) can be found here:
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?TroubleShooting#emc2_doesn_t_run_missing_lapic
Regards,
Alex
- Original Message -
On Tue, 6/25/13, Alex Joni wrote:
Subject: Re: [Emc-users] Why doesn't LinuxCNC run? Error log attached.
To: "Enhanced Machine Controller (EMC)"
Date: Tuesday, June 25, 2013, 1:47 AM
The error is in your log:
[ 216.183331] RTAI[hal]: ERROR, LOCAL APIC CONFIGURED
BUT
2013/6/26 Gregg Eshelman
> On Tue, 6/25/13, Alex Joni wrote:
>
> Subject: Re: [Emc-users] Why doesn't LinuxCNC run? Error log attached.
> To: "Enhanced Machine Controller (EMC)"
> Date: Tuesday, June 25, 2013, 1:47 AM
>
> The error is in your log:
Now LinuxCNC runs. So does the latency test.
On Wed, 6/26/13, Viesturs Lācis wrote:
Subject: Re: [Emc-users] Why doesn't LinuxCNC run? Error log attached.
To: "Enhanced Machine Controller (EMC)"
Date: Wednesday, June 26, 2013, 2:03 AM
2013/6/26 Gregg Eshelman
> On
On Wed, Jun 26, 2013 at 3:35 AM, Gregg Eshelman wrote:
> On Tue, 6/25/13, Alex Joni wrote:
> Well that might fix it, if I knew how to change it from read only so it
> can be edited. Were this Windows I could run a text editor with elevated
> Administrator rights, make the change, save it then it
On Wed, Jun 26, 2013 at 5:58 AM, Mark Wendt wrote:
> On Wed, Jun 26, 2013 at 3:35 AM, Gregg Eshelman wrote:
>
>> On Windows I have my login with Administrator rights and turn off User
>> Account Control so I don't have the OS constantly pestering me about "Do
>> you really want to do that?" Are y
On Wed, Jun 26, 2013 at 9:56 AM, Eric Keller wrote:
> Sudo is a way to give certain users some, or all, of the privileges given
> > to the root account. Do a "man sudo" to see what can be done,
> > privilege-wise, based on permissions set in the /etc/sudoers under the
> > Ubuntu OS, or /etc/su
On Wed, Jun 26, 2013 at 11:21 AM, Eric Keller wrote:
> On Wed, Jun 26, 2013 at 10:22 AM, Mark Wendt wrote:
>
> > The root account is already created, but it's locked. At least it is on
> > every Ubuntu build I've ever done, either for LinuxCNC or the desktops
> and
> > laptops I've built here a
On Wed, Jun 26, 2013 at 10:22 AM, Mark Wendt wrote:
> The root account is already created, but it's locked. At least it is on
> every Ubuntu build I've ever done, either for LinuxCNC or the desktops and
> laptops I've built here at work.
I'm pretty sure all you have to do is give the root accou
On Wed, 6/26/13, Eric Keller wrote:
Subject: Re: [Emc-users] Why doesn't LinuxCNC run? Error log attached.
To: "Enhanced Machine Controller (EMC)"
Date: Wednesday, June 26, 2013, 7:56 AM
On Wed, Jun 26, 2013 at 5:58 AM, Mark
Wendt
wrote:
> On Wed, Jun 26, 2013
On Thu, Jun 27, 2013 at 12:01 AM, Gregg Eshelman wrote:
>
> It's moronic to run windows.
>
Fixed that for ya... ;-)
Mark
--
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/wi
13 matches
Mail list logo
