have
been attached. I've seen this a few times in our environment with SP2 installed.
Brandon
On Tue, Dec 4, 2012 at 10:04 AM, Jason Benway
benw...@jsjcorp.commailto:benw...@jsjcorp.com wrote:
I disconnect a mailbox, ran clean-mailboxdatase so it showed up in the
disconnected mailboxes. Connected
It sounds like FOPE is just getting renamed? But will still be a service moving
forward?
We use it to front our onsite Exchange 2010.
jb
-Original Message-
From: Heaton, Joseph@DFG [mailto:jhea...@dfg.ca.gov]
Sent: Thursday, September 13, 2012 11:56 AM
To: MS-Exchange Admin Issues
First time giving back to the group!!! Yeah, thank you all for the years of
knowledge.
Glad I could help.
jb
From: ExchList [mailto:exchl...@networkblade.com]
Sent: Wednesday, August 15, 2012 12:25 PM
To: MS-Exchange Admin Issues
Subject: RE: Public Folders not receiving email
Jason Benway
{
$name + ,Unknown version,,
}
}
From: Jason Benway [mailto:benw...@jsjcorp.com]
Sent: Thursday, June 21, 2012 8:49 AM
To: MS-Exchange Admin Issues
Subject: SP2 RU3
I install SP2 RU3 for exchange 2010 this weekend it seemed to finish
successfully, but the version still shows 14.2 (build
I install SP2 RU3 for exchange 2010 this weekend it seemed to finish
successfully, but the version still shows 14.2 (build 247.5)
Looks like I should see a build number of 14.2.309.2 for RU3
So what happened to the RU, did it not install correctly?
jb
---
To manage subscriptions click here:
With Exchange archive mailboxes aren't they accessed online so the clients
being always connected put an extra resource strain on the exchange server.
Isn't cache mode one of the ways Microsoft got the server requirements so low
on 2010?
If I setup everyone with an archive mailbox won't I be
for the reduction in I/O load is due to caching (i.e.,
loading indices into memory) and schema redesigns (i.e., changing the way the
Exchange database is laid out on disk).
-Original Message-
From: Jason Benway [mailto:benw...@jsjcorp.com]
Sent: Wednesday, March 14, 2012 11:15 AM
To: MS
I think I found it I needed to click on VSS full. Now I wait another 3 hours to
see if it clears the logs :)
jb
From: Jason Benway [mailto:benw...@jsjcorp.com]
Sent: Monday, February 13, 2012 11:37 AM
To: MS-Exchange Admin Issues
Subject: RE: exchange logs during mailbox migration
Shoot
Nope that didn't do anything I did system status, the drives the DB and logs
are on and set VSS to full. The backup completed but it didn't clear the log
files.
I'm back down to only a few GB.
I'm about ready to just copy them elsewhere
jb
From: Jason Benway [mailto:benw...@jsjcorp.com]
Sent
this correctly.
You use the cli and vssadmin.
http://msdn.microsoft.com/en-us/library/windows/desktop/bb530725%28v=vs.85%29.aspx
From: Jason Benway [benw...@jsjcorp.com]
Sent: Monday, February 13, 2012 1:40 PM
To: MS-Exchange Admin Issues
Subject: RE: exchange logs during
Are you running it in an exchange 2010 environment? Where do you have it
installed CAS,Hub, or mailbox?
Thanks,jb
From: Adm [mailto:sms...@gmail.com]
Sent: Tuesday, December 13, 2011 1:31 PM
To: MS-Exchange Admin Issues
Subject: Re: Anyone use Sophos Pure Message for Exchange? On DAGs??
We use
yes
From: pramatow...@mediageneral.com [mailto:pramatow...@mediageneral.com]
Sent: Tuesday, November 15, 2011 9:08 AM
To: MS-Exchange Admin Issues
Subject: RE: process msexchangeadtopologyservice.exe topology discovery failed
Is the server a member of the Exchange Servers group?
From: Jason
I've seen the articles about changing the reg key in outlook 2010 to allow
direct booking.
My question is, if MS changed this in outlook 2010 what process should users
use to function like direct booking?
We have assistance that still want to just open the room calendar and book it
for short
calendar items.
And, in general, they can't be recovered.
Regards,
Michael B. Smith
Consultant and Exchange MVP
http://TheEssentialExchange.com
From: Jason Benway [mailto:benw...@jsjcorp.com]
Sent: Tuesday, October 11, 2011 8:57 AM
To: MS-Exchange Admin Issues
Subject: migrating
Transitioning to exchange 2010.
I have the HT/CAS and MBX setup, users and mailflow are all going
through the HT/CAS
I've moved the offline addressbook to the 2010.
I have outlook 2003 and 2010 clients.
I set the OAB to use publicfolders and web
It looks like the OAB is not
and two line commands you probably
need to run.
In terms of this issue, they are probably stored under Exchange 2007
though. This is a long-term data issue.
Regards,
Michael B. Smith
Consultant and Exchange MVP
http://TheEssentialExchange.com
From: Jason Benway [mailto:benw
, they are probably stored under Exchange 2007
though. This is a long-term data issue.
Regards,
Michael B. Smith
Consultant and Exchange MVP
http://TheEssentialExchange.com
From: Jason Benway [mailto:benw...@jsjcorp.com]
Sent: Monday, August 22, 2011 8:52 AM
To: MS-Exchange Admin Issues
.
In terms of this issue, they are probably stored under Exchange 2007
though. This is a long-term data issue.
Regards,
Michael B. Smith
Consultant and Exchange MVP
http://TheEssentialExchange.com
From: Jason Benway [mailto:benw...@jsjcorp.com]
Sent: Monday, August 22, 2011 8:52 AM
though. This is a long-term data issue.
Regards,
Michael B. Smith
Consultant and Exchange MVP
http://TheEssentialExchange.com
From: Jason Benway [mailto:benw...@jsjcorp.com]
Sent: Monday, August 22, 2011 8:52 AM
To: MS-Exchange Admin Issues
Subject: offline addressbook issues
The only downside is you would have to host all your External DNS
internally, but only for your internal users. Not a big deal, but that
is the only downside. We do it that way. So set up a zone for
external.com on your dns server put in all the A records and away you
go.
From: Jason Benway
To: MS-Exchange Admin Issues
Subject: RE: 2003 to 2010 transition
Not if that is the only thing you change.
Regards,
Michael B. Smith
Consultant and Exchange MVP
http://TheEssentialExchange.com
From: Jason Benway [mailto:benw...@jsjcorp.com]
Sent: Tuesday, August 09, 2011 3:59 PM
So set a primary SMTP address.
Regards,
Michael B. Smith
Consultant and Exchange MVP
http://TheEssentialExchange.com
From: Jason Benway [mailto:benw...@jsjcorp.com]
Sent: Monday, August 08, 2011 2:54 PM
To: MS-Exchange Admin Issues
Subject: First CAS issue
I moved our
.
Regards,
Michael B. Smith
Consultant and Exchange MVP
http://TheEssentialExchange.com
From: Jason Benway [mailto:benw...@jsjcorp.com]
Sent: Tuesday, August 09, 2011 7:52 AM
To: MS-Exchange Admin Issues
Subject: RE: First CAS issue
The problem was the set default button wasn't active
I moved our outgoing email though the CAS on Friday.
Today We are getting the error RESOLVER.ADR.BadPrimary on a contact in
one of our domains. The contact has two email addresses, one from our
company and one from yahoo.
I think how they use it is so he can receive email to a company address,
a hands-free operation.
Jason Benway benw...@jsjcorp.com 7/21/2011 10:27 AM
Just wondering how many on the list were running Microsoft forefront for
exchange and/or forefront for endpoints
What have has been your experience, better or worse than other products?
We currently run Trend
Sorry to highjack your thread.
Then does this mean, that users on the 2003 DB will start using the 2010 OWA
interface once the CAS is installed?
-Original Message-
From: Robb Pickinpaugh [mailto:robb.pickinpa...@anesthesiallc.com]
Sent: Thursday, July 07, 2011 1:18 PM
To: MS-Exchange
Issues
Subject: Re: AV on exchange 2010
Edge Server role is not just for AV/spam. It's for providing a secure
link for OWA/Activesync, also.
Jason Benway benw...@jsjcorp.com 7/6/2011 11:38 AM
We are running scanmail from Trend on our exchange 2003 cluster.
With Exchange 2010 it looks like
Are you using Cisco VPN for this? I remember something about an issue
with Cisco VPN and outlook.
From: Michael B. Smith [mailto:mich...@smithcons.com]
Sent: Monday, May 02, 2011 9:50 AM
To: MS-Exchange Admin Issues
Subject: RE: Too Many MAPI Connections
I spent a few minutes hunting for
Do you have the Cisco Call Center IPCC (UCCX) ? Just wondering how
exchange 2010 plays with it.
jb
From: Senter, John [mailto:john.sen...@etrade.com]
Sent: Monday, March 29, 2010 4:44 PM
To: MS-Exchange Admin Issues
Subject: RE: Drop Unity for Exchange 2007/2010 UM?
We actually did a
exchange 2010 on a
windows 2008 R2 server vs. just windows 2008 ?
Jason Benway
System/Storage Engineer
616-847-8474 telephone
616-850-1208 fax
www.jsjcorp.com http://www.jsjcorp.com/
JSJ Corporation
700 Robbins Road
Grand Haven, MI 49417
This message
We are using the same software. I didn't know they had phone support. I
always just emailed support. It takes awhile because they are in the UK.
jb
From: Peter Johnson [mailto:peter.john...@peterstow.com]
Sent: Wednesday, October 21, 2009 5:56 AM
To:
to answer it.
From: Jason Benway [benw...@jsjcorp.com]
Sent: Wednesday, June 17, 2009 10:51 AM
To: MS-Exchange Admin Issues
Subject: RE: recipient policy help
anyone?
From: Jason Benway [mailto:benw...@jsjcorp.com]
Sent
...@lyris.sunbelt-software.com] On Behalf Of
Jason Benway
Sent: 20 June 2009 16:28
To: MS-Exchange Admin Issues
Subject: re-attaching mailbox freezes ESM
We having a fully patches exchange 2003 server that we just migrated a
bunch of mailboxes from a different Exchange Org this weekend. A few
100 megs, but viewing through
outlook they should be below 100. I'm thinking the db cleanup process
should run and correct this. I've ran a full backup, which didn't
reclaim any of the space.
I know about eseutil, but I thought the cleanup processes ran by
themselves.
Jason Benway
System/Storage
with an
information store that need to be resolved and really should only be
done at the direction of PSS.
On Mon, Jun 22, 2009 at 7:56 AM, Jason Benway benw...@jsjcorp.com
wrote:
Normally isn't there a scheduled task/event that runs within
exchange to cleanup the db and free up whitespace
. The Exchange MB will contain
deleted items held until the retention period passes.
John W. Cook
Systems Administrator
Partnership For Strong Families
Sent to you from my Blackberry in the Cloud
From: Jason Benway
To: MS-Exchange Admin Issues
Sent: Mon Jun 22 09:42:45
unattached. When I try to reconnect the mailbox to
a different account it locks up the ESM.
I've tried from a different exchange server (same org) and get the same
results.
Any ideas?
thanks,jb
Jason Benway
System/Storage Engineer
616-847-8474 telephone
616-850-1208 fax
www.jsjcorp.com http
anyone?
From: Jason Benway [mailto:benw...@jsjcorp.com]
Sent: Thursday, June 11, 2009 4:01 PM
To: MS-Exchange Admin Issues
Subject: RE: recipient policy help
I'm using the GUI in exchange 2003 to create these policies. Not sure
how to edit the ldap directly
to be stamping DLs on all emails servers!!
thanks,jb
Jason Benway
System/Storage Engineer
616-847-8474 telephone
616-850-1208 fax
www.jsjcorp.com http://www.jsjcorp.com/
JSJ Corporation
700 Robbins Road
Grand Haven, MI 49417
This message may contain
hitting all mail enabled
objects on the server:
((mailnickname=*)
(msExchHomeServerName=/O=ghsp/OU=Belton/cn=Configuration/cn=Servers/cn=I
ZZYEMAIL))
will do approx. the same thing.
On Thu, Jun 11, 2009 at 6:31 AM, Jason Benway benw...@jsjcorp.com
wrote:
I created new recipient
back.
I'm going to increase logging levels, just not sure which domain or
exchange server to do it on.
Thanks,jb
Jason Benway
System/Storage Engineer
616-847-8474 telephone
616-850-1208 fax
www.jsjcorp.com http://www.jsjcorp.com/
JSJ Corporation
700 Robbins Road
Grand Haven, MI
be that the
recipients are hitting the highest priority policy (priority 1) and not
continuing on to the new policy.
-alex
On Mon, Jun 8, 2009 at 11:01 AM, Jason Benway benw...@jsjcorp.com
wrote:
I created a new recipient policy for our Exchange 2003 org
Its the second policy the first
.
From: Jason Benway [benw...@jsjcorp.com]
Sent: Tuesday, May 19, 2009 2:08 PM
To: MS-Exchange Admin Issues
Subject: recipient policy and X400 question
Is there a way to document/export recipient in exchange 2003
and
in a pure exchange 2003 org, do I need X400 addresses
Is there a way to document/export recipient in exchange 2003
and
in a pure exchange 2003 org, do I need X400 addresses on new recipient
polices?
thanks,jb
Jason Benway
System/Storage Engineer
616-847-8474 telephone
616-850-1208 fax
www.jsjcorp.com http://www.jsjcorp.com/
JSJ
the
hotfix, but I'm looking for experiences from people that have tried this
hotfix.
Thanks,jb
Jason Benway
System/Storage Engineer
616-847-8474 telephone
616-850-1208 fax
www.jsjcorp.com http://www.jsjcorp.com/
JSJ Corporation
700 Robbins Road
Grand Haven, MI 49417
http://usb.smithtech.us/apps/servu.php
Serv-U FTP Server Portable
From: Oliver Marshall [mailto:oliver.marsh...@g2support.com]
Sent: Monday, December 22, 2008 1:25 PM
To: MS-Exchange Admin Issues
Subject: Single exe windows ftp server
Hi chaps,
Can
Do any of the free outlook search tools search only the cache files when
in cache mode so It doesn't impact the exchange server?
I'm thinking MS desktop search or xobni??
We are running windows XP, outlook 2003 in cache mode, and exchange
2003.
thanks,jb
Jason Benway
System/Storage Engineer
Here's a link from vmware with some information from a Dell tech about
running a huge exchange environment on vmware. But these are all in
controlled installs not production.
http://www.savagenomads.net/2008/03/05/16000_exchange_mailboxes_1_server
_-_vmware_vroom/
jb
please send one of those invite my way
jb
From: Eldridge, Dave [mailto:[EMAIL PROTECTED]
Sent: Thursday, April 24, 2008 11:15 AM
To: MS-Exchange Admin Issues
Subject: xobni invites
Just installed and have 6 to give.
dave
This e-mail contains the thoughts
Is anyone using a product to centrally manage outlook signatures in an
exchange 2003 environment?
Thanks,jb
~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~
~ http://www.sunbeltsoftware.com/Ninja~
are you talking about?
My users have so many that I have to actually back them up. I have
some users with like 40 of them. And yes, they use templates too!
-Sam
-Original Message-
From: Jason Benway [mailto:[EMAIL PROTECTED]
Sent: Tuesday, March 25, 2008 3:32 PM
To: MS-Exchange
I've been search for information about how much increasing the free busy
information published out to 12 months. Most of the sites I've found
only talk about the process not server impact, if any.
our exchange servers have less then 500 user each. Other than some
increase in the public folder
We got RPC-Https working and were running up instructions on how-to
configure outlook 2003. Then we starting thinking that people could use
the directions to setup their own PC or other non-company asset to pull
a copy of all their emails.
Is there anyway to stop people from using non-company
WE just went live using exchanges resources instead of public folders.
We have Exchange 2003 with outlook 2003, so far its been so/so
So far we noticed issues with trying to let the exchange server pick a
single resource when multiple are selected. In outlook the auto pick is
set to all receipts
54 matches
Mail list logo