Belay this! My bad, I see that I hadn't updated gv package afterwards. All is
well now. My apologies.
From: Mike Wilkes
Sent: Tuesday, November 22, 2016 7:07 AM
To: Fink
Subject: [Fink-beginners] problem with gv
I thought everything was good
I thought everything was good after installing xfig and octave the other day,
but I just tried to look at a .ps file with gv and get the following errors now:
MacBook-Pro:FLUIDS Mike$ gv notes.ps
Warning: translation table syntax error: Unknown event type : EnterWindow
Warning: ... found
so I am not sure whether to worry about it or not, since things seem
to be working OK. Here is what I get:
MacBook-Pro:~ Mike$ fink list -t xfig libxaw3dxft
Information about 10198 packages read in 1 seconds.
i libxaw3dxft 1.6.2-6.2 Athena widget set with 3D look
i libxaw3dxft-shlibs 1.6.
MacBook-Pro:~ Mike$ ls -al /sw/fink/dists/local/main/finkinfo
total 48
drwxr-xr-x 6 root wheel 204 Nov 18 07:06 .
drwxr-xr-x 4 root wheel 136 Oct 10 2015 ..
-rw-r--r-- 1 root wheel 8194 Nov 18 07:06 libxaw3dxft-api-tokens.patch
-rw-r--r-- 1 root wheel 3507 Nov 18 07:06
installed just
fine, with transfig-graphicx. I then tried to install xfig again, but the error
conflict of fig2dev with transfig-graphicx appears to still be there:
MacBook-Pro:CLASSICAL_MECHANICS Mike$ fink install xfig
Information about 10196 packages read in 1 seconds.
The following package
Hi Alexander. I tacked this on as a reply to my earlier problem with the
conflict between xfig and octave, but you may not have seen it. xfig installed
fine after removing octave, but then immediately upon trying to start it I get
Error: Couldn't find per display information
I have XAPPLRES
Here is what happens when I try an install of xfig after selfupdating to fink
0.41.1:
MacBook-Pro:~ Mike$ fink install xfig
Information about 10196 packages read in 1 seconds.
The following package will be installed or updated:
xfig
The following additional package will be installed
Thanks again, Alexander, transfig-graphicx installed just fine with apt-get.
Onward and upward with Octave...I hope. Do you have a preference for one
version over another?
From: Alexander Hansen
Sent: Thursday, October 27, 2016 4:35 PM
To: Mike Wilkes
Cc: Fink
install Octave at this point? Or is it time for "apt-get"?
From: Alexander Hansen
Sent: Thursday, October 27, 2016 12:36 PM
To: Mike Wilkes
Cc: Fink
Subject: Re: [Fink-beginners] Installing Octave, failed dependencies with
Transfig-graphicx
On Oct 27, 2
So the "apt-get" looks for a binary of it? Here is the output from an install
attempt of transfig-graphicx:
MacBook-Pro:~ Mike$ fink install transfig-graphicx
Password:
Information about 10165 packages read in 2 seconds.
The following package will be installed or updated:
Continuing the attempt to install Octave 3.8.2-10.
I seem to have found the right "system-java" from Apple's website, thanks to
the tip from Ben Abbott.
The compile of octave-atlas-qtx11 now fails at the attempt to install
transfig-graphicx 3.2.5d-1014, with inconsistent dependencies. It is s
I tried installing octave 3.8.2, but get the failed dependency error on
"system-java16". I have "system-java18" installed, and the latest java from
Oracle downloaded yesterday (I never really know what I am doing when this
happens). Should I go back to fink's "system-java17", which is still avai
Thank you, Hanspeter, yes, that was the problem. I updated libpng16-shlibs, and
all seems to be well now. Texlive has installed just fine.
From: Hanspeter Niederstrasser
Sent: Saturday, September 24, 2016 7:00 PM
To: Mike Wilkes; Fink
Subject: Re: [Fink
I selfupdated fink to version 0.41.0, running OS X 10.10.5 (no upgrades to
either the OS or XQuartz). Tried to update packages texlive-base and texlive,
got following error messages:
Error: `pdftex -ini -jobname=xmltex -progname=xmltex *xmltex.ini' failed
fmtutil: running `pdftex -ini -jobn
wxmaxima-gtk seems to be running just fine, but I find that there is no option
to export to LaTeX (only to html). I never tried to do this with the mac
version, so I don't know if it was an option there, but looking at the
documentation, it seems to have been available on wxmaxima for quite a wh
t the following error when I try to
start: LSOpenURLsWithRole() failed for the application
/sw/Applications/wxMaxima.app with error -10810.One other thing, I am still
running OS 10.10, now with fink 0.39.2. Any ideas?
OSX 10.10.4
> From: alexanderk.han...@gmail.com
> Date: Wed, 29 Jul 2015 07:49:29 -0700
> CC: fink-beginners@lists.sourceforge.net
> To: mike.wil...@hotmail.com
>
>
> > On Jul 29, 2015, at 07:23, Mike Wilkes wrote:
> >
> > This thing is cursed. I used fin
Date: Wed, 29 Jul 2015 07:51:03 -0700
CC: fink-beginners@lists.sourceforge.net
To: mike.wil...@hotmail.com
On Jul 29, 2015, at 07:23, Mike Wilkes wrote:Feeling
lost, I went back and listed packages installed by fink, and noticed that I
needed to update a library named libidn-shlibs 1.31-1
ecord somewhere). I tried to "launchctl load" the same
.plist with no noticeable effect, after that I was back to the same old
problem, and haven't been able to recover to a usable X11 since. For what it's
worth, the following processes run when I try to start X11
Date: Sat, 25 Jul 2015 09:33:33 -0700
CC: fink-beginners@lists.sourceforge.net
To: mike.wil...@hotmail.com
On Jul 25, 2015, at 01:35, Mike Wilkes wrote:
I see that /sw/share/xinitrc has the script sys-xinitrc-fink in it. As I
mentioned, at one point, I removed fink's xinitrc package and al
e it was working with 2.7.7 prior to rebooting. I don't know, that's the
way it seems to this novice.
Subject: Re: [Fink-beginners] XQuartz 2.7.7 on OSX 10.10.4
From: alexanderk.han...@gmail.com
Date: Fri, 24 Jul 2015 14:44:56 -0700
CC: fink-beginners@lists.sourceforge.net
To: mike.wil...@h
;s the
way it seems to this novice.
Subject: Re: [Fink-beginners] XQuartz 2.7.7 on OSX 10.10.4
From: alexanderk.han...@gmail.com
Date: Fri, 24 Jul 2015 14:44:56 -0700
CC: fink-beginners@lists.sourceforge.net
To: mike.wil...@hotmail.com
On Jul 24, 2015, at 14:34, Mike Wilkes wrote:I
shutdown the system
ri, 24 Jul 2015 14:44:56 -0700
CC: fink-beginners@lists.sourceforge.net
To: mike.wil...@hotmail.com
On Jul 24, 2015, at 14:34, Mike Wilkes wrote:I
shutdown the system, brought it back up, and all things X seem to still be
working fine, using 2.7.5 on 10.10...as long as I launch from an xter
n...@gmail.com
Date: Fri, 24 Jul 2015 12:13:59 -0700
CC: fink-beginners@lists.sourceforge.net
To: mike.wil...@hotmail.com
On Jul 24, 2015, at 12:00, Mike Wilkes wrote:I have
been problem free for over a year, thank you very much, fink providers. But, I
recently destroyed my less than two-yea
pplication. Will let you know what happens.
Thanks, Alexander.Subject: Re: [Fink-beginners] XQuartz 2.7.7 on OSX 10.10.4
From: alexanderk.han...@gmail.com
Date: Fri, 24 Jul 2015 12:13:59 -0700
CC: fink-beginners@lists.sourceforge.net
To: mike.wil...@hotmail.com
On Jul 24, 2015, at 12:00, Mike Wilk
07:30 +
If you are using a .xinitrc file, try getting rid of it.
> On Jul 24, 2015, at 3:00 PM, Mike Wilkes wrote:
>
> I have been problem free for over a year, thank you very much, fink
> providers. But, I recently destroyed my less than two-year-old MBP with a
> glass o
ought it back to the same sorry state with no
working X windows!
Thanks for any help you can give me with this very frustrating situation.
-Mike
--
___
dded high resolution binned_GHHS_'x'.nc files from
gshhg-gmt-2.3.4.tar.gz
x'=c,i,l and added f,h
There is a gmt.conf file, which has 'IS' set in it.
I am also guessing I don't have the right files for high resolution
for my powerpc 10.4 gmt system.
kind regards
Mik
Just Installed Fink-0.8.1-PowerPC
Tried to instal gmt package on PPC OS X 10.4:
sudo fink install gmt
Information about 1998 packages read in 2 seconds.
The following package will be installed or updated:
gmt
The following additional package will be installed:
netcdf-shlibs
Do you want to con
Just Installed Fink-0.8.1-PowerPC
Tried to instal gmt package on PPC OS X 10.4:
sudo fink install gmt
Information about 1998 packages read in 2 seconds.
The following package will be installed or updated:
gmt
The following additional package will be installed:
netcdf-shlibs
Do you want to con
On Oct 28, 2014, at 1:42 PM, Alexander Hansen
wrote:
> On 10/28/14, 11:00 AM, Mike Kilmer wrote:
>> Thank you.
>>
>> $ fink info postgresql92
>>
>> mentions: could not determine XFree86 version number
>>
>> I get permission denied on /sw/v
s on Debian says permissions are all
messed up and recommended abandoning this route and using a virtual box, but
I'd like to get this working.
Hoping you might be able to offer some insight? I'd like to avoid a clean OS
install if possible.
Thanks a bunch and have a great one.
Mike
Is OS X 10.7 officially supported?
mike
On Oct 18, 2014, at 1:52 PM, Alexander Hansen wrote:
> On 10/18/14, 7:13 AM, Mike Kilmer wrote:
>> Hi and thanks in advance for any insights.
>>
>> Does this give you guys enough information to help me get postgresql
>> inst
Hi and thanks in advance for any insights.
Does this give you guys enough information to help me get postgresql installed
on my snow leopard os x:
make -C modules all
sed 's,@TCLSH@,/sw/bin/tclsh,g' pltcl_loadmod.in >pltcl_loadmod
chmod a+x pltcl_loadmod
sed 's,@TCLSH@,/sw/bin/tclsh,g' pltcl_del
On Oct 17, 2014, at 1:39 PM, Alexander Hansen wrote:
> On 10/17/14, 10:50 AM, Mike Kilmer wrote:
>>
>> On Oct 17, 2014, at 12:26 PM, Alexander Hansen wrote:
>>
>>> On 10/17/14, 10:06 AM, Mike Kilmer wrote:
>>>>
>>>>
On Oct 17, 2014, at 12:26 PM, Alexander Hansen wrote:
> On 10/17/14, 10:06 AM, Mike Kilmer wrote:
>>
>> On Oct 17, 2014, at 11:49 AM, Alexander Hansen wrote:
>>
>>>
>>>
>>>
>>> Begin forwarded message:
>>>
>>>>
r: no matching function for call to 'time' tt = time((time_t)NULL);
^~~~/usr/include/time.h:133:8: note: candidate function not viable: no
known conversion from 'time_t' (aka 'long') to 'time_t *' (aka 'long *')
for 1st argumen
k are the latest Xcode and command-line
tools for 10.8, so do you think I still have some sort of problem with that
installation?
Thanks,-Mike
"I cannot even imagine where I would be
today were it not for that handful of friends who have given me a heart full of
joy. L
As far as a zombie window manager, I guess not:
quaternion:xinit Mike$ ps ax | grep wm 1770 s000 S+ 0:00.00 grep wm
This is the directory structure you asked about:
quaternion:~ Mike$ cd /opt/X11/lib/X11/xinit/quaternion:xinit Mike$ ls -altotal
280drwxr-xr-x 9 root wheel306 May 22 05
I didn't customize X11 startup (as far as I know, anyway…I actually wouldn't
know how to begin), so I assume I have the default. I do have fink's xinitrc
package installed:
quaternion:~ Mike$ fink list xinitrcInformation about 10041 packages read in 1
seconds. i xinitrc
per left corner of desktop and can't be moved. Also, after
opening edit to edit a file under this new X11, cursor changes to an "X", the
nedit window is pinned to upper left corner and cannot be moved, and eventually
closed/crashed with the error
quaternion:Data Mike$
corner and cannot be moved, and eventually
closed/crashed with the error
quaternion:Data Mike$ XIO: fatal IO error 35 (Resource temporarily
unavailable) on X server "/tmp/launch-Rfo1RT/org.macosforge.xquartz:0"
after 10597 requests (7987 known processed) with 0 events remaining
m afterwords so simple and straightforward),
but I guess if I did I could apply for a job with the fink project. Thanks
again for all you do for this community.
-Mike
"I cannot even imagine where I would be
today were it not for that handful of friends who have given me
rk.han...@gmail.com
> To: mike.wil...@hotmail.com; fink-beginners@lists.sourceforge.net
> Subject: Re: [Fink-beginners] Problems installing maxima 5.30.0-5 on g4 ppc
>
> On 5/19/14, 10:12 AM, Mike Wilkes wrote:
> > Hello again,
> >
> > I know this is a pain in the be
ckage"maxima-5.30.0-5" (no matching packages/versions found)
Exiting with failure.
Are maxima and xmaxima still available for the old g4? If so, can you help?
Many thanks, Alex.
-Mike
-
beyond the call. Thanks again.
-Mike
> Date: Wed, 14 May 2014 07:25:11 -0700
> From: alexanderk.han...@gmail.com
> To: fink-beginners@lists.sourceforge.net; mike.wil...@hotmail.com
> Subject: Re: [Fink-beginners] Problems with sources.list and osx 10.5
> powerpc? And now, firef
;t see anything on this particular
problem. I am sure this post is not directed correctly, and probably much too
long. My apologies in advance. But thank you both for any help you can
provide.
-Mike
"I cannot even imagine where I would be
today were it not for that handful of friends w
stion besides finally getting rid of the PowerBook? Thanks, you have been
very helpful in the past, and much appreciated.
-Mike
--
"Accelerate Dev Cycles wi
on, 24 Mar 2014 06:58:08 -0700
> From: alexanderk.han...@gmail.com
> To: mike.wil...@hotmail.com; fink-beginners@lists.sourceforge.net
> Subject: Re: [Fink-beginners] Output of a function definition in wxmaxima?
>
> On 3/24/14, 4:31 AM, Mike Wilkes wrote:
> > I have found no r
it?
> Date: Thu, 20 Mar 2014 17:59:39 -0700
> From: alexanderk.han...@gmail.com
> To: mike.wil...@hotmail.com; fink-beginners@lists.sourceforge.net
> Subject: Re: [Fink-beginners] Output of a function definition in wxmaxima?
>
> On 3/20/14, 12:48 PM, Mike Wilkes wrote:
> >
fink-beginners@lists.sourceforge.net
> Subject: Re: [Fink-beginners] Output of a function definition in wxmaxima?
>
> On 3/20/14, 12:48 PM, Mike Wilkes wrote:
> > Thanks, Alexander. First, I should probably tell you that I have
> > wxmaxima looking into /sw/bin/maxima. Is that OK? It does seem
m
> To: mike.wil...@hotmail.com; fink-beginners@lists.sourceforge.net
> Subject: Re: [Fink-beginners] Output of a function definition in wxmaxima?
>
> On 3/20/14, 11:03 AM, Mike Wilkes wrote:
> > I have installed wxmaxima-mac (first installed wxmaxima-mac-standalone
> > but r
I have installed wxmaxima-mac (first installed wxmaxima-mac-standalone but
removed it because I thought it might be the reason for my problem). When I
try to define a function, say f(x):=x^3, the output line is < > := ^3 (a space
with a 3-superscript). If I do the same thing with maxima at the
Sorry, please disregard. Set path to maxima in wxmaxima (correctly, this time,
although I thought I had done this earlier), and all is well.
My apologies.
"It’s not the years in your life that count. It’s the life in your years."
–Abraham Lincoln
From: mike.wil...@hotmail.com
To: fink-beginners
Hello Alexander,
I installed fink's wxmaxima-standalone. Tried to enter a first simple command,
and get the error: "Not connected to Maxima!" Also, no help files seem to be
available. I have finks's maxima and xmaxima installed as well, both seem to
work fine. Can you explain my pathetic situa
Thanks. All is well again. Now, let's see what dia can do. I need a
mechanical "spring"-like object to illustrate physics problems involving
blocks, springs, and pulleys.-Mike
> Date: Thu, 17 Jan 2013 20:56:49 -0700
> From: alexanderk.han...@gmail.com
> To: mike
munity, I'm sure, am certainly
grateful for your expertise and help in pulling us out of these sometimes murky
waters of program compilation.
-Mike
> Date: Thu, 17 Jan 2013 08:05:41 -0700
> From: alexanderk.han...@gmail.com
> To: mike.wil...@hotmail.com
> CC: fink-beginners@
build jobs:
1
Thank you for your assistance.
-Mike
--
Master Visual Studio, SharePoint, SQL, ASP.NET, C# 2012, HTML5, CSS,
MVC, Windows 8 Apps, JavaScript and much more. Keep your sk
Excellent! Yes, everything has built, and I now have a brand spanking new
grace to grace my laptop Mountain Lion. Thank you, thank you, thank you, Alex,
David, and Martin for the great service you provide. My best wishes to you all
for a Merry Christmas and prosperous New Year!
-Mike
.org/software/libgcc/";| /* end confdefs.h. */| | int| main ()|
{| | ;| return 0;| }configure:3602: error: in
`/sw/src/fink.build/gcc47-4.7.2-1000/darwin_objdir/x86_64-apple-darwin12.2.0/libgcc':configure:3605:
error: cannot compute suffix of object files: cannot compileSee `conf
would need to proceed further?
-Mike
> Date: Sun, 23 Dec 2012 12:36:19 -0700
> From: alexanderk.han...@gmail.com
> To: mike.wil...@hotmail.com
> CC: fink-beginners@lists.sourceforge.net
> Subject: Re: [Fink-beginners] ppl9 errors in attempting to install grace
>
> On 12/23/
e way, you guys are
amazing at what you do! Wish I were more computer and programming savvy.-Mike
> Date: Sun, 23 Dec 2012 17:00:46 -0500
> From: f...@csl.cornell.edu
> To: mike.wil...@hotmail.com
> CC: fink-beginners@lists.sourceforge.net; fang...@users.sourceforge.net;
> howa
/sw/fink/dists/local/main/finkinfo, which shows
quaternion-3:~ Mike$ ls -al /sw/fink/dists/local/main/finkinfototal
24drwxr-xr-x 4 root wheel 136 Dec 23 13:48 .drwxr-xr-x 4 root wheel 136
Dec 22 06:43 ..-rw-r--r--@ 1 root wheel 5568 Dec 23 13:44 gmp5.info-rw-r--r--
1 root wheel 1833
code 2Removing runtime
build-lock...Removing build-lock package.../sw/bin/dpkg-lockwait -r
fink-buildlock-ppl9-0.11.2-3(Reading database ... 31800 files and directories
currently installed.)Removing fink-buildlock-ppl9-0.11.2-3 ...Failed: phase
compili
ofinformation I completely forgot about.
I wanted to thank you for your earlier direction to
http://http://finkers.wordpress.com/2009/08/31/starting-anew/,which proved very
helpful. The new, one-line script is very nice, too. Thanks, again.-Mike
> Date: Fri, 21 Dec 2012 18:52:26 -0700
>
s now run just dandy, but fink doesn't. No matter
what part of the fink instructions I try to follow and apply, I get with every
fink invocation the following:
quaternion-3:~ Mike$ fink --versionarch: /usr/bin/perl5.10.0 isn't executable
This is another ubiquitous error, seen and commented
Thank you very much, Alexander. I am on my way to the link you suggested, will
return with tail between legs if I run into more trouble.-Mike
> Date: Sun, 16 Dec 2012 12:49:34 -0700
> From: alexanderk.han...@gmail.com
> To: mike.wil...@hotmail.com
> CC: fink-beginners@lists.sou
start nedit was
quaternion-3:fontconfig-2.10.1 Mike$ nedit config.log &[1]
72782quaternion-3:fontconfig-2.10.1 Mike$ dyld: Library not loaded:
/sw/lib/freetype219/lib/libfreetype.6.dylib Referenced from:
/sw/lib/libXm.2.dylib Reason: no suitable image found. Did find:
/sw/lib/freetype219
version: selfupdate-rsync Sun Dec
16 11:02:26 2012, 10.5, powerpcTrees: local/main stable/main stable/crypto
unstable/main unstable/cryptoXcode.app: 3.1.4Xcode command-line tools:
3.1.4Max. Fink build jobs: 1 (changed from 2, originally)
This is what I tried to do:
quaternion-3:~ Mike$ sudo fink
ack those up and run Time Machine I
would be OK.
Thanks again.
Mike
-Original Message-
From: Alexander Hansen [mailto:alexanderk.han...@gmail.com]
Sent: Friday, July 08, 2011 10:21 AM
To: Mike Marquez
Cc: fink-beginners@lists.sourceforge.net
Subject: Re: [Fink-beginners] Changing the
ror I have been having.
Do I need to perform an additional step to recompile the source after
making the change in fink configure?
Thanks again.
Mike
--
All of the data generated in your IT infrastructure is seriously val
ried to install.
-Original Message-
From: Robert Wyatt [mailto:chupacerv...@gmail.com]
Sent: Thursday, July 07, 2011 11:42 PM
To: Mike
Cc: fink-beginners@lists.sourceforge.net
Subject: Re: [Fink-beginners] Changing the default path used to detect
the Xcode version
So you have MacOS 10.6.8 and you'
Hi Robert,
Thanks for the response.
I get:
Xcode 3.2.3
Component versions: DevToolsCore-1691.0; DevToolsSupport-1591.0
BuildVersion: 10M2262
-Original Message-
From: Robert Wyatt [mailto:chupacerv...@gmail.com]
Sent: Thursday, July 07, 2011 11:22 PM
To: Mike Marquez
Cc: fink
I get the following error when attempting to install a package:
"Can't resolve dependency "xcode (>= 3.1.2)" for package
"gcc44-4.4.6-1000" (no matching packages/versions found)"
I think the problem is due to the fact that Fink looks for the property
list file assuming the path is
"/Developer/A
Hi Stan,
Sorry, i meant to say "could i please unsubscribe".
On Oct 13, 2010, at 6:03 PM, Stanley Williams wrote:
> Ii don't know about g77 but g95 can compile 32 bit or 64 bit code. It also
> works on the current macs. It might work for you.
>
> Stan
>
>
> On Oct 13, 2010, at 2:11 PM,
please UnSubscribe
On Oct 13, 2010, at 6:03 PM, Stanley Williams wrote:
> Ii don't know about g77 but g95 can compile 32 bit or 64 bit code. It also
> works on the current macs. It might work for you.
>
> Stan
>
>
> On Oct 13, 2010, at 2:11 PM, Andrea L Edwards wrote:
>
>> I tried to insta
Hi monipol,
thank you!!! it worked!
mike
Mike Hickerson
Assistant Professor
Biology Department
Queens College, CUNY
65-30 Kissena Boulevard
Flushing, NY 11367-1597
Office Phone: 718 997 3447
Lab Phone 718 997 3415
office E114
lab E321
http://qcpages.qc.cuny.edu/Biology/Hickerlab/index.html
On Jan 5, 2010, at 1:01 PM, monipol wrote:
> On 05/01/2010, at 15:12, Mike Hickerson wrote:
>> although this worked on our other 64 bit mac OS 10.6 machine, now it will
>> not install on another 64 bit mac.
>>
>> after going to the fink package database and finding g
still does not work.
this must be easy, but is there anything i am missing?
thank you much in advance
mike
--
This SF.Net email is sponsored by the Verizon Developer Community
Take advantage of Verizon's best-in
On 3/2/09 07:55, Martin Costabel wrote:
> There is a workaround which involves patching and rebuilding
> gtk+2-shlibs. With this workaround, gimp2 builds correctly (as does
> libx264). But this workaround hasn't been committed to Fink yet.
Thanks - I think I'll wait fo
gt; failed to load "x264.ico": Couldn't recognize the image file format for
> file 'x264.ico'
> make[1]: *** [x264_icon.h] Error 1
> make: *** [libx264gtk.a] Error 2
I'm having the same problem compiling the latest gimp2 on Intel 10.5.6.
I've followed the t
On Oct 5, 2007, at 9:41 AM, Alexander K. Hansen wrote:
> Mike Myers wrote:
>
>> Thanks for the response, Alexander.
>>
>>> It looks to me like Fink built it correctly but whatever you're
>>> trying
>>> to compile is trying to force a Universal b
On Oct 5, 2007, at 11:18 AM, Daniel Johnson wrote:
>
> On Oct 5, 2007, at 9:41 AM, Alexander K. Hansen wrote:
>
>> Mike Myers wrote:
>>>
>>> Another beginner OSX question then, does the concept of building a
>>> library as a universal binary even make sens
Thanks for the response, Alexander.
> It looks to me like Fink built it correctly but whatever you're trying
> to compile is trying to force a Universal build.
I agree -- I suppose that this trouble is rooted in the project
settings for my Xcode build. Something else must be overriding my
"ar
Hello all. I'm new to both development on a Mac and to the Fink
package manager. I've been to the Fink user FAQs and through the user
guides and didn't see any mention of this problem when I searched the
mailing list archives, so ...
I have some fairly simple C code that I am compiling (in X
;t it using 0.8.1. Why am I still using 10.4-transitional? What
is the correct procedure to upgrade? FYI My FinkCommander version is
0.5.3. I run OSX 10.4.x (never used 10.3.x or lower).
Thanks,
Mike
-
This SF.net email is spon
I have looked in the mailing list archives and haven't been able to
find an answer to my issue.
I have a fresh install of Fink on a PowerMac G4 (500MHz) under 10.4.8
I started an install of kde (fink install bundle-kde) and half way
through it my machine fell asleep. Now I get an error every time
I'm currently running perl verion 5.8.6 on my machine, and have been trying
to install the fink package html-parser-pm. Installing
html-parser-pm588 fails, as to be expected. When I attempt to install
html-parser-pm586 (version match), fink tells me that there are "No packages
to install" when c
Hi,
I downloaded GRASS through Fink, but can't figure what the next steps
are.
Fink Commander says the "grass60" and "grass60-shlibs" are installed.
But, I can't get the program to run; don't see anything remotely
resembling an icon.
Any help
m.
anyway i don't have the time to endlessly fool around with fink.
apple's X11 is already there; so, for me, it's just a matter of
figuring out what works best with it.
good luck with it.
michael
On 10/30/05, matz.org <[EMAIL PROTECTED]> wrote:
> Thanks Mike!
this article might be helpful to you
Setting Up And Running Kde And Xfree86 With Fink, by: Si_man
http://www.appletalk.com.au/articles/index.php?article=12088
good luck with it.
michael hallsted
***
On 10/29/05, matz.org <[EMAIL PROTECTED]> wrote:
> Hi!
> i'm going to try kde on my ibook dow
I tried to install the virtual package x11.
When I type "fink install x11" in OS X I get the following message:
Failed: no version info available for x11
When I type "fink -V x11" I get version info. Please advise!
...
Also, I get many errors when I try to run an installed package
concerning
client
10.4, or just assumed nobody would run it.
Mike.
---
This SF.Net email is sponsored by Yahoo.
Introducing Yahoo! Search Developer Network - Create apps using Yahoo!
Search APIs Find out how you can build Yahoo! direct
to work, though. It bombs
out with the following error when it first receives an SNMP request:
Symbol not found: _hosts_ctl
Referenced from: /usr/lib/libnetsnmpagent.5.dylib
Expected in: flat namespace
Mike.
---
This SF.Net email is
On 5/1/05, Martin Costabel <[EMAIL PROTECTED]> wrote:
> Mike Sutliff wrote:
> > After upgrading to Tiger, I installed the new xtools with X11 & X11
> > SDK. I then ran 'update all' in Fink.
> > I now get: No rule to make target
> > `/sw/lib/p
After upgrading to Tiger, I installed the new xtools with X11 & X11
SDK. I then ran 'update all' in Fink.
I now get: No rule to make target
`/sw/lib/perl5-core/5.8.1/darwin-thread-multi-2level/CORE/objXSUB.h',
needed by `Parser.o'
I even ran a rebuild on the perl5.8.1 core. This error occured with
On 24/4/05 10:18 pm, Stan Sanderson wrote:
> Thanks for sharing. I did the prebinding and Ethereal is loading quickly.
Yes, thanks - loading nice and quickly here as well.
Mike.
---
SF email is sponsored by - The IT Product Guide
Read hon
ault capture setup, capture begins as soon as
> requested.
Thanks - good to know it's not just me. The delays before the main
window appears and before capture starts are pretty much the same for
me. Maybe somebody on the ethereal list can e
On 18/4/05 10:46 pm, Mike Zanker wrote:
> I've compiled and installed ethereal but it takes around 50 seconds to
> start up, during which time the CPU is at 100%. Same when starting to
> capture data - CPU at 100% for nearly one minute then data starts being
> captured.
Nobody
Hi folks,
I've compiled and installed ethereal but it takes around 50 seconds to
start up, during which time the CPU is at 100%. Same when starting to
capture data - CPU at 100% for nearly one minute then data starts being
captured.
Is this an OSX issue?
Thanks,
1 - 100 of 190 matches
Mail list logo
