I had this problem too.
I fixed it by running "fink configure" and updating the mirrors.
-ross-
On Jan 10, 2008, at 11:58 AM, Massimiliano Chiorboli wrote:
> Thanks Alexander,
>after this command I get a long list, at the end of which is:
>
> Downloading the indexes of available packages in
You might consider setting the MacBook to never sleep as long as it
has external power.
-Ross-
On Jan 16, 2007, at 10:45 AM, Hans Kruse wrote:
> I have this problem routinely if the machine changes IP addresses
> as part of the sleep/wake cycle.
>
> (Apple X11, Intel MacBook Pro)
>
> On Jan
ry standard fonts. I think tried installing
various other font-like packages ( x-ghostscript-fonts) without any
effect.
So I tried to remove xpdf and re-build it with a new default choice
for fonts. UNfortunately, fink does not seem to allow me to start
over..
Pointers appreciated, thank
On Sep 1, 2006, at 1:21 PM, Alexander Hansen wrote:
> On 9/1/06, Wolfgang Keller <[EMAIL PROTECTED]> wrote:
>> Hello,
>>
>> is there a way to make a GTK application use the MacOS X system
>> fonts (e.g.
>> LucidaGrande instead of Vera)?
>>
>> It's not that Vera is ugly, but the requirement to ad
Jerel Zarestky wrote:
xgcc: installation problem, cannot exec `c++filt': No such file or
directory
make[2]: *** [genmodes] Error 1
I had this problem. I followed the instructions on the fink FAQ
(which amounted to installing XCode v2.2). The problem went away.
-Ross
I'd agree that the uses are limited. But I have used fink's Firefox
because I needed to check something remotely and I could throw an X-
Window onto my remote machine.
This was VERY helpful.
-Ross Smith-
On Oct 17, 2005, at 10:53 AM, Martin White wrote:
Don't shoot me dow
Just tried it ...
fink build libxklavier10-shlibs
Works!
-r-
On Sep 20, 2005, at 10:30 PM, Daniel E. Macks wrote:
Ross Smith <[EMAIL PROTECTED]> said:
fink update libxklavier1-shlibs
fails with this error.
[snip error]
Can you 'fink build libxklavier10-shlibs' s
On Sep 20, 2005, at 6:06 PM, Martin Costabel wrote:
Ross Smith wrote:
mkdir_p='$(mkinstalldirs)'
Yup. This is what I have also ...
35> which mkdir
/bin/mkdir
Indeed. I am getting the error too now, after removing Fink's
fileutils package (thought I had trie
On Sep 20, 2005, at 2:17 PM, Brian Haberman wrote:
If you look at the config.log file in
/sw/src/fink.build/gnome-spell-1.0.6-1/gnome-spell-1.0.6/ by running
grep mkdir config.log
what do you get?
I am having the exact same problem as listed above, so I thought I
would
chime in as well.
: gnome-spell-1.0.6-1 failed
On Sep 19, 2005, at 5:50 PM, Martin Costabel wrote:
Ross Smith wrote:
Thanks!
Upgrading to gnome-system-monitor-2.6.0-16 does not seem to be an
option since fink will not allow it.
But that would be the best course I'd think.
Is gnome-system-monitor-2.6
This is Tiger with all patches on a dual processor G4.
fink update libxklavier1-shlibs
fails with this error. All the other things seem to be working ...
checking for nl_langinfo... yes
checking for nl_langinfo and CODESET... yes
checking for setlocale... yes
checking for X... libraries /usr/X
A couple of weeks ago I mailed this question tot he list. There have
been several updates in fink since then, but none of them seems to
have dealt with this.
Can anyone help?
-Ross-
Email Archive: fink-beginners (read-only) Search
From: Ross Smith <[EMAIL PROTECTED]>
Can
I tried rebuilding several other pacakges it depends on and look in
the FAQ, finding nothing. The error has persisted through several
days of selfupdates...
Here is the tail end of the message...
In file included from interface.c:38:
cellrenderer.h:29:1: warning: "GTK_TYPE_CELL_RENDERER_PROG
error: $MACOSX_DEPLOYMENT_TARGET mismatch: now "10.4" but "10.3"
during configure
### execution of /var/tmp/tmp.2.B0Q3df failed, exit code 1
Removing build lock...
/sw/bin/dpkg-lockwait -r fink-buildlock-libxml2-py24-2.6.20-1
(Reading database ... 96830 files and directories currently installed.
make: *** [all] Error 2
### execution of /var/tmp/tmp.1.IKLnh4 failed, exit code 2
Apparently, there is a dependency on "fontconfig2-shlibs", but this
was not installed.
Installing fontconfig2-shlibs allowed vte to install.
Maybe this should be fixed.
-
Sorry to ask again if this has been covered...
This build fails and has for a couple of weeks now. The error makes
it look as though the package is missing some bits...
gcc -Wall -ffast-math -fsigned-char -I/sw/include -g -O2 -o .libs/
example example.o -L/sw/lib -L../src/.libs -lshout -lv
Hi Everyone...
An update of r-base still fails on Tiger as follows...
gcc -I../../src/extra/zlib -I../../src/extra/bzip2 -I../../src/extra/
pcre -no-cpp-precomp -I. -I../../src/include -I../../src/include -I/
sw/include -DHAVE_CONFIG_H -fno-common -g -O2 -c dcf.c -o dcf.lo
gcc -I../../
This is Tiger with the latest selfupdated fink.
The r-base update rolls along, then dies as follows...
gcc -I../../src/extra/zlib -I../../src/extra/bzip2 -I../../src/extra/
pcre -no-cpp-precomp -I. -I../../src/include -I../../src/include -I/
sw/include -DHAVE_CONFIG_H -fno-common -g -O2 -
On May 19, 2005, at 6:30 PM, Martin Costabel wrote:
Ross Smith wrote:
I did a selfupdate and tried again. Same result...
Are you sure you have the new patch file?
An indication could be the following line in the configure output:
checking for unix98 socklen_t... nah
or
checking for unix98
ctly:
Keith Conger <[EMAIL PROTECTED]>
((Did that :-))
-Ross Smith-
---
This SF.Net email is sponsored by Oracle Space Sweepstakes
Want to be the first software developer in space?
Enter now for the Oracle Space Sweepstakes!
http
"R" is a statistical package that is widely available as "freeware" on
UNIX and other platforms.
Is it available as part of fink? Anyone know of it running on OSX?
-Ross Smith-
---
This SF.Net email is sponsored by: NEC IT
trouble of finding
an even older terminal I can use.
I'm asking this list because I expect that whatever software is out
there will be part of fink.
-Ross Smith-
---
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reportin
On Feb 4, 2005, at 7:21 PM, Eric Lecht wrote:
I use ZTermfree program, I believe.
Settings? I recall Settings-modem-select the port from drop-down. Once
Keyspan driver is installed.
It looks good. But it is $20 shareware and Minicom is free and seems
to work nicely (and is part of fink).
On Feb 4, 2005, at 12:34 PM, Alexander K. Hansen wrote:
On Feb 4, 2005, at 12:24 PM, Ross Smith wrote:
... that will allow me to "talk" out of one of the USB ports to a
KEYSPAN serial adaptor that I will plug into the back of a server I
have to manage.
Minicom?
Minicom was the answ
On Feb 4, 2005, at 12:34 PM, Alexander K. Hansen wrote:
On Feb 4, 2005, at 12:24 PM, Ross Smith wrote:
... that will allow me to "talk" out of one of the USB ports to a
KEYSPAN serial adaptor that I will plug into the back of a server I
have to manage.
I have to replace (reall
e cable to
the back of my Mac through the KEYSPAN and skip the trouble of finding
an even older terminal I can use.
I'm asking this list because I expect that whatever software is out
there will be part of fink. I looked at some potential candidates with
"fink list", but nothing
I have lesstif installed with fink and it is clearly being used by the
packages that require Motif.
But I'd like to use lesstif for other projects. Can anyone say where
the header files are put and the libraries that need to be linked
against? They don't seem to be in the "standard" place (a
On Nov 6, 2004, at 1:07 AM, Martin Costabel wrote:
Ross Smith wrote:
On Nov 5, 2004, at 11:08 AM, Martin Costabel wrote:
[]
From "fink info kde":
To remove all of the official KDE packages, you can remove the KDE
libraries and anything that depends on them by running, in a
terminal:
On Nov 5, 2004, at 11:08 AM, Martin Costabel wrote:
Ross Smith wrote:
[]
Is there a way to simply get rid of KDE without having to find and
remove each tiny component individually?
From "fink info kde":
To remove all of the official KDE packages, you can remove the KDE
libraries an
A long time ago I installed KDE.
But I've not used it now for about a year and the chances of doing so
get smaller I'm afraid. It would not be such a problem if it actually
re-built, but it has now been a week and I'm still whittling down the
hundreds of mini-packages that demand to be re-built
The fact that it won't build is a big problem. It means that the
>100-odd items that are due for update-all won't update because
gnomemeeting is "next".
How do you disable a package?
-Ross-
On Oct 26, 2004, at 4:52 PM, Martin Costabel wrote:
Ross Smith wrote:
Comp
Fixed them. There were several. This should be fixed next time there
is a major change to the package.
Thanks!
On Oct 26, 2004, at 12:53 AM, Martin Costabel wrote:
Phillip Ross Smith wrote:
[]
fink update qt3
I see at the end...
WARNING: found suspicious file or directory "libqt-mt.3.1.1.
Compilation fails Am I missing something?
gnomemeeting.cpp: In member function `void GnomeMeeting::Connect()':
gnomemeeting.cpp:176: `GTK_COMBO' undeclared (first use this function)
gnomemeeting.cpp:176: (Each undeclared identifier is reported only once
for
each function it appears in.)
gn
On Oct 25, 2004, at 8:28 AM, Alexander K. Hansen wrote:
On Oct 24, 2004, at 9:26 PM, Phillip Ross Smith wrote:
smithp01-25> fink update qca-shlibs
Do you have fileutils installed? If so , try removing that and
rebuild qt3.
I removed fileutils. And I updated fink again...
Now when I ...
f
smithp01-25> fink update qca-shlibs
Information about 4010 packages read in 4 seconds.
The package 'qca-shlibs' will be built and installed.
The following package will be installed or updated:
qca-shlibs
bzip2 -dc /sw/src/qca-1.0.tar.bz2 | /sw/bin/tar -xvf - --no-same-owner
--no-same-permissions
include gcc3.1.
-- Dave
On Sep 20, 2004, at 7:28 AM, Ross Smith wrote:
I'm sorry. I believe I saw the answer to this zip by, but I didn't
pay attention. Sorry...
I upgraded to Tools 1.5 and I guess this is the problem. I did check
the FAQ ...
During an update-all I get ..
WARNING: W
I'm sorry. I believe I saw the answer to this zip by, but I didn't pay
attention. Sorry...
I upgraded to Tools 1.5 and I guess this is the problem. I did check
the FAQ ...
During an update-all I get ..
WARNING: While resolving dependency "gcc3.1" for package
"pwlib-1.5.2-12", package "gcc3.
On Sep 19, 2004, at 10:04 AM, Martin Costabel wrote:
Ross Smith wrote:
[]
W: Couldn't stat source package list file: local/bootstrap Packages
(/sw/var/lib/apt/lists/_sw_fink_dists_local_bootstrap_binary-darwin-
powerpc_Packages) - stat (2 No such file or directory)
"fink scanpackag
On Sep 17, 2004, at 10:40 PM, Alexander K. Hansen wrote:
smithp01-5> fink --version
Package manager version: 0.22.0
Distribution version: 0.7.0.rsync
I was afraid of that. This version had a bug that broke rsync
selfupdating.
Try downgrading to an earlier version, either one that's on your
sy
I've been using fink for a couple of years, updating every evening.
But for the last few weeks, there have been no updated packages. This
after years in which there was something to update nearly every day.
We're in a slow patch for some reason? Or is there a bug in the system?
-Ross-
Problem on update-all
smithp01-2> fink update-all
Information about 3613 packages read in 2 seconds.
WARNING: While resolving dependency "system-java15" for package
"ant-1.6.1-1", package "system-java15" was not found.
WARNING: While resolving dependency "system-java15" for package
"ant-1.6.1-1",
... appears to require bison, but bison is not one of the dependencies
that get updated/installed.
Is this is a minor bug?
-ross-
---
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vega
On Jun 18, 2004, at 3:09 PM, Martin Costabel wrote:
Ross Smith wrote:
In file included from rsvg-styles.h:35,
from rsvg-private.h:30,
from rsvg-gz.c:25:
/sw/include/pango-1.0/pango/pangoft2.h:52: error: parse error before
'*' token
Look for the F
Just did a selfupdate and saw the following error. I did try to
rebuild pango1-xft2-shlibs. Not because I know what I'm doing, btw,
but it didn't work..
fink update librsvg2-shlibs
<>
In file included from rsvg-styles.h:35,
from rsvg-private.h:30,
On Jun 1, 2004, at 8:59 AM, Alexander K. Hansen wrote:
On Jun 1, 2004, at 8:32 AM, Ross Smith wrote:
Any idea what this might be? Is the database damaged?
This looks like the pine-ssl deb archive got damaged. Try rebuilding
it.
That fixed it.
Thanks!
-r
Any idea what this might be? Is the database damaged?
smithp01-5> fink update-all
Information about 3203 packages read in 16 seconds.
The following 5 packages will be installed or updated:
pine-ssl python python23 python23-shlibs python23-socket
dpkg -i
/sw/fink/dists/unstable/crypto/binary-dar
On Apr 8, 2004, at 4:10 PM, Martin Costabel wrote:
Ross Smith wrote:
[]
Next question, however, when I start gimp-2.0 I get this message...
Fontconfig error: Cannot load default config file
Do you have the file /etc/fonts/fonts.conf? If not, you need to
[re]install the BSD.pkg from the system
On Apr 7, 2004, at 10:18 AM, Alexander K. Hansen wrote:
On Apr 7, 2004, at 7:47 AM, Ross Smith wrote:
Hope this hasn't been a major area of discussion...
I tried to install gimp2 this morning. However, I get this error...
I'm running Panther. I guess I have to define the path to
Hope this hasn't been a major area of discussion...
I tried to install gimp2 this morning. However, I get this error...
checking for gimpprint-config... no
checking for GIMP-PRINT - version >= 4.2.0... no
*** The gimpprint-config script installed by GIMP-PRINT could not be
found
*** If GIMP-PRI
On Feb 11, 2004, at 7:35 AM, Tukaram wrote:
Am 11.02.2004 um 12:19 schrieb Ross Smith:
codecs/qgb18030codec.cpp:7734: internal compiler error: Segmentation
Fault
Please submit a full bug report,
Sounds bad. For my knowledge is this kind of problem often a problem
of your computer hardware
c++-3.3 -c -pipe -fno-common -fPIC
-I/sw/src/qt3-3.2.3-23/qt-x11-free-3.2.3/include
-I/usr/X11R6/include/freetype2 -I/usr/X11R6/include -I/sw/include
-fno-exceptions -Wall -W -Os -fPIC -DQT_SHARED -DQT_NO_DEBUG
-DQT_THREAD_SUPPORT -D__DARWIN_X11__ -DQT_THREAD_SUPPORT -DQT_NO_NIS
-D_LARGEFILE_S
I just installed Mozilla 1.5 with fink because I wanted a version that
would use X. And it works nicely. Thanks!
However, I need to view a Java applet in browser (Mozilla) window.
When I click the URL I get a nice new window, but no applet running (on
Safari it works just fine). On the OSX v
This is the latest "fink update-all". I have been trying get this done
for a couple of days so far...
.
ld: warning prebinding disabled because dependent library:
/sw/lib/librsvg-2.2.dylib is not prebound
ld: warning multiple definitions of symbol _locale_charset
/sw/lib/libiconv.dylib(loca
On Jan 11, 2004, at 4:52 AM, Eric Hoch wrote:
Hi Roos,
On Sat, 10 Jan 2004 17:55:49 -0500, Ross Smith wrote:
smithp01-11> fink update-all
Information about 2423 packages read in 2 seconds.
WARNING: The package gnome-terminal Depends on atk1,
but atk1 only allows things to BuildDepend
smithp01-11> fink update-all
Information about 2423 packages read in 2 seconds.
WARNING: The package gnome-terminal Depends on atk1,
but atk1 only allows things to BuildDepend on it.
WARNING: The package gnome-session Depends on atk1,
but atk1 only allows things to BuildDepend on
... failed...
...
Prepare automaton `ppc8540_retire' creation...done
Create automaton `ppc8540_retire' (1 star is 100 new states):* done
Make DFA `ppc8540_retire' (1 star is 100 new states): done
Minimize DFA `ppc8540_retire'...done
Prepare automaton `power4iu' creation...done
Create automaton
Yup. Got me past that.
Thanks!
-r-
On Dec 24, 2003, at 2:37 PM, Martin Costabel wrote:
Ross Smith wrote:
Seems to be something missing...
...
Reading package info...
Updating package index... done.
Re-executing fink to use the new version...
Information about 2235 packages read in 3 seconds
Seems to be something missing...
...
Reading package info...
Updating package index... done.
Re-executing fink to use the new version...
Information about 2235 packages read in 3 seconds.
The following package will be installed or updated:
fink-mirrors
Failed: No mirror site list file found for m
Just saw this
mcrc13-2> fink update-all
Information about 1976 packages read in 2 seconds.
Failed: Can't resolve dependency "linc1 (>= 1.0.3-1)" for package
"orbit2-2.8.2-2" (no matching packages/versions found)
mcrc13-3> fink list linc1
Information about 1976 packages read in 3 seconds.
i
.. that this may not be a "fink" problem per se, but the packages:
atk1-1.4.1-2 and glib don't seem to be on the mirrors in the places
that fink thinks they are. I dug around on various machines last night
to find them and did (in very different places). e.g. Fink wants
ftp://ftp.gnome.org/pu
On Nov 25, 2003, at 7:38 AM, Benjamin Reed wrote:
Phillip Ross Smith wrote:
Tried to build ant to be used in the OpenOffice build.
During the build I get the message: "HotSpot not at correct virtual
address: shareing disabled"
And the OO configure reports ant to be busted.
I assum
Tried to build ant to be used in the OpenOffice build.
During the build I get the message: "HotSpot not at correct virtual
address: shareing disabled"
And the OO configure reports ant to be busted.
I assume I missed something somewhere...
Anyone have an idea?
Thanks!
-ross-
--
This is an old problem, still here with Panther. doxygen won' compile
for me if both CPUs of my dual cpu G4 are running. The compilation
stops here ...
.
c++ -c -pipe -D__FreeBSD__ -Wall -W -O2 -I/sw/include -I../qtools
-I../libpng -o ../objects/language.o language.cpp
and waits a very l
ked at the whole output to see if there are any lines that
start with a C? Those are frequently the culprits--a file that you
modified won't be replaced.
http://fink.sourceforge.net/faq/usage-fink.php#cvs-busy
--On Friday, November 21, 2003 9:10 AM -0500 Ross Smith
<[EMAIL PROTECTED]>
I installed Panther, removed xfree86, installed Apple X11 and tried to
update fink with "fink selfupdate", which, after some fiddling, sort-of
worked.
Right now it consistently crashes as follows...
..
cvs server: Updating 10.3/unstable/main/finkinfo/web
cvs server: Updating 10.3/unstable/m
On Thursday, November 13, 2003, at 10:00 AM, Alexander K. Hansen wrote:
It's in the FAQ:
http://fink.sourceforge.net/faq/comp-general.php#node-exists
On Thursday, November 13, 2003, at 07:38 AM, Ross Smith wrote:
Tried to update this morning, the first time I've done an update-all
Tried to update this morning, the first time I've done an update-all on
Panther, and got this...
smithp01-26> fink update-all
Information about 1765 packages read in 1 seconds.
Failed: Internal error: node for esound-shlibs already exists
smithp01-27>
How do you fix something like this?
-ross-
On Nov 11, 2003, at 7:49 AM, Martin Costabel wrote:
Ross Smith wrote:
[]
Could you try to rebuild gimp once more? This time it should work,
even with the bug, because the right version of libgck, namely
1.2.5.0, is already installed (or so I presume).
I can't find anything on fink that
On Nov 11, 2003, at 1:48 AM, Martin Costabel wrote:
OK, now we are getting somewhere.
Ross Smith wrote:
[]
1) The path to at least one of the sources of the s/w has a typo..
Most of the times, these things are not typos, but mirror
administrators who find it great to change their directory
On Nov 10, 2003, at 11:22 AM, Martin Costabel wrote:
You mean you don't have a file /sw/etc/fink.conf? If you didn't
destroy it deliberately, your postinstall.pl script must have done
something bad, and it probably talked about it. What do you get from
sudo /sw/lib/fink/postinstall.pl
OK. I co
On Nov 10, 2003, at 11:22 AM, Martin Costabel wrote:
Phillip Ross Smith wrote:
[]
Tried both with the same result.
I don't follow here. What did you try and what result did you get?
From what you wrote one could conclude that you did one of
>> "fink install gimp" or equi
On Nov 10, 2003, at 2:03 AM, Martin Costabel wrote:
Phillip Ross Smith wrote:
[]
smithp01-4> fink rebuild gimp
"fink rebuild" tries to rebuild the *same* version as you already have
installed.
Information about 640 packages read in 0 seconds.
The following package will be rebuilt:
On Nov 9, 2003, at 6:35 PM, Martin Costabel wrote:
Phillip Ross Smith wrote:
I have Panther and have installed Xcode and updated fink.
What is your Distribution line in /sw/etc/fink.conf? If it is 10.2,
you need to run "sudo /sw/lib/fink/postinstall.pl" or "fink reinstall
fink&
I have Panther and have installed Xcode and updated fink. However,
there is a problem with Gimp and I'd like to rebuild it. An attempt to
do that led to this...
smithp01-5> fink rebuild gimp
Information about 3011 packages read in 2 seconds.
The following package will be rebuilt:
gimp
Failed
On Nov 8, 2003, at 11:32 AM, Martin Costabel wrote:
Phillip Ross Smith wrote:
I upgraded to Panther and installed X, plus Xcode and the X SDK from
the CD.
X seems to work.
Two issues (and there WILL be more)
1) During the installation I was asked to move the .xinitrc file
aside. So I did
I upgraded to Panther and installed X, plus Xcode and the X SDK from
the CD.
X seems to work.
Two issues (and there WILL be more)
1) During the installation I was asked to move the .xinitrc file aside.
So I did. This contains the line
source /sw/bin/init.sh
Executing that line leads to an
On Tuesday, October 14, 2003, at 03:46 PM, Alexander K. Hansen wrote:
Umm: that should be "which rsync"...
On Tuesday, October 14, 2003, at 03:34 PM, Ross Smith wrote:
On Tuesday, October 14, 2003, at 03:08 PM, Benjamin Reed wrote:
Ross Smith wrote:
find . -name CVS | xargs rm -rf
On Tuesday, October 14, 2003, at 03:08 PM, Benjamin Reed wrote:
Ross Smith wrote:
find . -name CVS | xargs rm -rf
rsync -az -v rsync://fink.opendarwin.org/finkinfo//VERSION
/sw/fink/VERSION
rsync: failed to connect to fink.opendarwin.org: Connection refused
rsync error: error in socket IO (code
On Tuesday, October 14, 2003, at 11:17 AM, Alexander K. Hansen wrote:
For some reason, my syntax seems a little different:
su hansen -c "rsync -az --delete-after -v
'rsync://fink.opendarwin.org/finkinfo/10.2/stable/main/finkinfo'
'/sw/fink/10.2/stable/main/'"
i.e. everything's quoted and you h
Is there something I need to edit somewhere? Or is the server
overloaded (still, after 3 days of trying..) ...
mcrc13-52> fink selfupdate
I will now run the rsync command to retrieve the latest package
descriptions.
Updating stable/main
su smithp01 -c 'rsync -az --delete-after -v
rsync://fink.
On Wed, 2003-02-05 at 00:30, Xavier Roche wrote:
> >> You want to mention them, but mention that they've been shelved,
> >> cite the RFC that explains why :)
> >>Which one would that be? I can't find any particular RFC, or actual
>
> This one:
>
> http://www.ietf.org/rfc/rfc2474.txt?number=2474
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 03/04/03 14:25:51
Log message:
51. Fix segfaults that can happen when using composition of RENDER and
non-RENDER fonts (#A.1656, Wu Jian Feng).
Modified files:
xc/lib/Xft/:
xftdraw.c
fortunately):
BuildDepends: dlcompat-dev, texinfo (>= 4.1-3), gettext-dev,
libiconv-dev
Depends: dlcompat-shlibs
Alexander K. Hansen
Levitated Dipole Experiment
http://www.psfc.mit.edu/LDX
-Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Ross
Smit
Hansen
Levitated Dipole Experiment
http://www.psfc.mit.edu/LDX
On Sun, 27 Jul 2003, Ross Smith wrote:
I'm not quite sure how to follow the instructions. I have..
smithp01-48> pwd
/sw/src
smithp01-49> ls gnupg*
gnupg-1.2.1.tar.gz gnupg-docs-20021001.tar.gz gnupg-idea-1.11.tar.gz
smit
able to run "gpg --gen-key" initially?
On Sunday, July 27, 2003, at 03:42 PM, Ross Smith wrote:
I have rebuilt gnupg-1.2.2 several times and I get the same result.
A crash when I run it.
smithp01-8> gpg --help
gpg (GnuPG) 1.2.2
Copyright (C) 2003 Free Software Foundation, Inc.
tall gnupg-1.2.1-2
Also, do you have 1.2.2-1 or 1.2.2-2? The latter is available via
unstable.
Alexander K. Hansen
Levitated Dipole Experiment
http://www.psfc.mit.edu/LDX
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Ross
Smith
Sent: Sunday, July 27, 2
I have rebuilt gnupg-1.2.2 several times and I get the same result. A
crash when I run it.
smithp01-8> gpg --help
gpg (GnuPG) 1.2.2
Copyright (C) 2003 Free Software Foundation, Inc.
This program comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it
unde
Question: I currenlty use the threaded 4.2.1.1 branch.
How do I switch to 4.3.0? I would have assumed that fink would have
done it for me automatically as soon as 4.3 was available, but it
didn't seem to...
I'm not sure I want to live with Apple's X11 just yet. And I have
lots of stuff com
On Sunday, March 30, 2003, at 12:28 AM, Benjamin Reed wrote:
Phillip Ross Smith wrote:
libtool: install: error: relink `libkdeui.la' with the above command
before installing it
OK, I've checked in a possible fix for this -- it tests OK in my tree.
Please give it a shot and let me k
Several attempts at building it have failed. They all end here...
/sw/lib/libkdeui.4.dylib -compatibility_version 6 -current_version 6.0
ld: Undefined symbols:
/usr/bin/libtool: internal link edit command failed
KApplication::sessionSaving() const
libtool: install: error: relink `libkdeui.la' w
and
libpng3; if so, then try rebuilding them one at a time rather than in a
batch.
On Thu, 27 Feb 2003, Phillip Ross Smith wrote:
I just built evolution with fink. I didn't notice anything as it
built
but when i started it i get messages like...
libpng warning: Application was compiled
I just built evolution with fink. I didn't notice anything as it built
but when i started it i get messages like...
libpng warning: Application was compiled with png.h from libpng-1.0.12
libpng warning: Application is running with png.c from libpng-1.2.5
.. and ..
evolution-shell-CRITICAL **:
On Monday, February 24, 2003, at 08:55 AM, Martin Schröder wrote:
[Sorry if this is OT; if it's a FAQ please point me to it.]
We are thinking of porting a unix app to Darwin. Since we have
fink everything we need seems to be available, but we need a fs
that is case-sensitive (i.e. we need to be a
In addition to the other problems that have been noted with this
update, I get a compilation error...
c++ -c -pipe -D__FreeBSD__ -Wall -W -O2 -I../qtools -I../libpng -o
../objects/reflist.o reflist.cpp
c++ -c -pipe -D__FreeBSD__ -Wall -W -O2 -I../qtools -I../libpng -o
../objects/rtfdocvisitor.o
I just tried Gnome2 with OroborOSX. I got a menu bar running across
the middle of the screen, which I could not move. And another at the
bottom.
Is there a way to configure menu bar placement?
On Thursday, February 13, 2003, at 05:24 PM, Gary Tate wrote:
The problem with the top bar was with
As I had said, I had installed Virex 7.2 before I realized this was a
REALLY BAD IDEA. However, I ran the fix that Kow had posted and had
had no problems doing fink updates after it was in (or before,
actually). Also, in my case, the /sw/lib area was intact (it seemed).
And Virex also seems
I just did an upgrade of "openssl" and " cyrus-sasl". Both initially
failed.
The reason is that one wants "db3" and the other "db4" and they don't
know enough to notice that they don't have what they need. If you try
to compile/link wit the wrong library installed, it crashes with
unresolved
OK. I blew it. I installed the damn thing last night.
Now what I do??
On Saturday, February 8, 2003, at 04:57 AM, Stefano wrote:
I am forwarding a message from Ben Hines.
This is important for all fink users: DO NOT install this software!
Follow the news on the fink web page about this.
Stef
Welll I have KDE installed and kmail configured.
And it al works!
But kmail is amazingly slow. To read a roughly 2K message took 2-3minutes to
download. The same message takes a fraction of a second to downlaod using
Apple Mail.
The only thing that might be slightly unusual is that the ser
Question: Where would you like to have KDE errors reported?
Here to Fink-beginners? Or somewhere else?
Ross
---
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.co
1 - 100 of 147 matches
Mail list logo
