Hi,
My flex has ceased transmitting RF on 40m. No RF out with SSB, CW and Tune
button responds ‘NO RF DETECTED.’
A fault with the rig? Other bands are fine.
Regards,
Dave.
Sent from Mail for Windows 10
___
FlexRadio Systems Mailing List
Hi Greg,
Really appreciate the information. I am all set up and ready to go. I
will forward my amtor and pactor results to you and the forum if interested.
The connection via the firewire is definately better than through the
mic connection. I have found my RF problems have been
Hi
I am running the UZ7HO packet soundcard program with my flex-3000. I am
decoding packets but I'm unable to connect to stations. I've had a
similar issue with MixW before.
The program outputs to 11025 and I have my flex VAC line set to 11025.
What's the trick?
Regards
Dave
Hi Folks,
Well... aren't I the last person in the flexshpere to discover that
dropping filter to 100hz and lowering AGC-T to 95 or below does wonders
to dig out weak CW sigs.
That should be in the manual!
Cheers
Dave.
___
FlexRadio Systems
Hi,
Found just what I was looking for - Settings - General - Options -
Disable split on band change = tick. No more accidential tuning up the
AL-80B on 6m!
Tnx. Features.
73
Dave.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Hi Flex,
That histogram on the panadapter is just within the filter range. Would
it be possible to get it across the spectrum in a new release?
Regards,
Dave
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Is it necessary to do the Soundcard Calibration process with MMTTY for
SSTV using PowerSDR+VAC?
I've just installed and picked up some pics with slants. I don't know
whether its them or me.
Regards
Dave.
___
FlexRadio Systems Mailing List
Last night turning on the flex kept killing my lan connection. Then after a
reboot the issue resolved itself.
Sent from my Telstra Next G deviceflexradio-requ...@flex-radio.biz
wrote:---
I was updating my iPhone tonight and had it connected to the PC with iTunes
Hi,
I'm trying to find where the wave file is stored in 2.4.4? No files are
being created in /User/Music/PowerSDR directory.
regards
Dave
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Hi,
I happened to notice the 2.4.4 release notes are up.
Regards,
Dave
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
Hi,
I've installed PowerSDR on my PC connected to our 40 TV. The PowerSDR
objects are displaced and buttons are showing 1.5 buttons and the
function objects are overlapping other objects. So in short, it's all
higgledy-piggidy.
I'm using WIn7 x 64 and a AMD Radeon HD 6700 Series graphics
Hi,
I installed VAC 4.11 and noticed multiple images of the digital transmission
was appearing in the TX Filter. I setup according to the flex instructions.
So I have deleted 4.11 and returned to 4.09.
Has anyone else noticed this?
Regards
Dave.
Hi folks,
I have VAC 4.11 working. No problems now.
The soundcard settiings for FLDIGI show AUTO, and a range of other sample rate
settings. Should I set fldigi to AUTO or 48000?
Cheers,
Dave
___
FlexRadio Systems Mailing List
Hi folks,
I was wondering if it is possible to wire an SM-20 up to a FLEX-3000. I've
been told it can't be done. Even better - is there a ready made adaptor
available anywhere?
Regards
Dave
___
FlexRadio Systems Mailing List
Hey,
The new PowerSDR 2.3.5 is available for download.
Dave.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
Not a good start to the marriage.
On Sat, 2011-10-01 at 19:19 -0400, William H. Fite wrote:
I just built an Elecraft KPA500 to drive with my Flex 5000. However,
I now have a serious problem.
I put the amp on the same shelf as the radio but every time I walk out of
the shack the 5000
You reckon you're out of touch just wait until you start hearing voices!
- Original Message -
From: Neal Campbell abrohamn...@gmail.com
To: DXBase List dxb...@mailman.qth.net; FlexRadio List
flexradio@flex-radio.biz; dxb...@yahoogroups.com
Sent: Friday, September 02, 2011 8:29 AM
Hi flexers,
Can anyone suggest a PC Case with a 7 touch screen that can be used for
the woodbox software?
I see the Silverstone CW03 (expensive) but nice and the LUXA2 LM200
which is more of a multimedia box.
I cannot seem to get info at the moment about whether video is send via
USB or whether
Hi folks,
Is SP1 for Windows 7x64 a recommended install? I have not yet installed
it.
Regards,
Dave
VK2NA
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
Well done. Is that documented?
On Sun, 2011-06-26 at 02:41 -0400, manual...@juno.com wrote:
Keystroke CTRL + M will trigger the MOX on or off. I have one button
programmed on my ShuttlePro to do this. Works great when you don't want a
foot switch. Nice and functional, finger activated, PTT
Hi,
It looks you guys in the US, JA, and EU are having fun on 6m.
http://www.vhfdx.info/spots/map.php?Lan=EFrec=50ML=MMap=NADXC=NHF=NGL=N
Dave
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Hi folks,
I disconnected the antenna from my flex-3000 and I noticed about 2 S
points of noise on the receiver. I connected a dummy load and the noise
continued without an variation. I changed power supplies, disconnected
the earth, changed computers but no difference. The noise is on all
I was going to buy some more Tune In the Excitement gear but that link
shows an attractive Canadian blonde trying to sell Viagra. This really
complicates my consumer choices.
:)
On 06/10/2011 03:34 AM, Tim (W4TME) wrote:
DO NOT CLICK ON THE LINK BELOW.
It is SPAM and may contain a virus.
I've consulted with my wife. She insists I buy a flex. There you go...
Viagra does work :-)
On 06/10/2011 07:56 AM, dan edwards wrote:
well, the pink 'viagra for her' will definitely 'tune in some
excitement'ha ha ha
73, w5xz, dan
--- On *Thu, 6/9/11, David Walker /vk...@bigpond.com
Hi all,
Am I the last person to discover the RC3? Did I miss the announcement?
This will give me something to do after the kids go to bed.
73
Dave
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Hi Folks,
I have attempted to install RC3 on my Althon II, 3Ghz with Win64 but get
the PowerSDR stopped working windows is looking for a solution.
I deleted all references and the master.xl file from
/user/username/appdata/flexradio V.XXX and restart the process but
PowerSDR falls over at
On 6/06/2011 8:59 PM, David Walker wrote:
Hi Folks,
I have attempted to install RC3 on my Althon II, 3Ghz with Win64 but
get the PowerSDR stopped working windows is looking for a solution.
I deleted all references and the master.xl file from
/user/username/appdata/flexradio V.XXX
Hi Folks,
I have attempted to install RC3 on my Althon II, 3Ghz with Win64 but get
the PowerSDR stopped working windows is looking for a solution.
I deleted all references and the master.xl file from
/user/username/appdata/flexradio V.XXX and restart the process but
PowerSDR falls over at
Many thanks for the link Brian.
Dave
vk2na
On 4/06/2011 8:18 PM, Brian Lloyd wrote:
On Sat, Jun 4, 2011 at 2:24 AM, David Walker vk...@bigpond.com
mailto:vk...@bigpond.com wrote:
Hi,
I cannot find any info on how to set the leveler which I assume is
like an AGC for microphone
the compounder now makes a noticable difference than with my
original settings. I couldn't hear any difference at all with my
previous settings.
Cheers,
Dave
On 4/06/2011 8:18 PM, Brian Lloyd wrote:
On Sat, Jun 4, 2011 at 2:24 AM, David Walker vk...@bigpond.com
mailto:vk...@bigpond.com
With Teamviewer remoting... is it better to use skype for audio
redirection, or is it possible to get sound through teamviewer?
Regards
Dave
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Audio situation is resolved by using IPSound. This is an interesting
experience to be able to use my flex downstairs from the coffee table
upstairs. Very neat indeed.
73
Dave
On 8/05/2011 5:56 PM, David Walker wrote:
With Teamviewer remoting... is it better to use skype for audio
Has anyone vnc accessed powersdr via an android phone?
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Hi Jeff,
... and especially with the new 2.0.22 which seems to put a lot of
latency issues to bed for CW ops :-)
Regards
Dave
On 3/04/2011 4:33 AM, Gerald Youngblood wrote:
Hi Jeff,
While the Celeron is a little on the light side, I would give it a try
before buying a new PC. We have a
-radio.biz] On Behalf Of David Walker
Sent: Wednesday, March 30, 2011 4:58 AM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] PSDR 2.0.22
I have to use 2048 buffers to stop the crackling. And much more CPU
load; and 35% avg. Whereas previous version I could use 512 and have
about 18% load
What do people think of NR on version 2.0.22?
When I turn NR on my rx audio crackles. I the previous version was much
better on my PC. I think its a disaster. Any suggestions before I
revert back?
(My PC... Asus M4A89TD Pro / USB3 with Athlon II 3Ghz CPU, Win7x64, 4GB
Ram. Radio FLX3000)
here ... NR good in 2.0.22 but bad before.
Hardware: MacMini 1.8 GHz, 2 GB Main Memory, Windows 7
73, Frank DG1SBG
Am 30.03.2011 um 11:36 schrieb David Walker:
What do people think of NR on version 2.0.22?
When I turn NR on my rx audio crackles. I the previous version was much better
on my PC
I install Avira on my XP machine because it is free and apparently uses
less CPU than other more commercial brands. It was new ground for me
because for years I've used Avaste and it has always intercepted risks
on the internet on the fly.
Avira failed me a few days ago when my machine got
I know that digi modes are popular but I've been calling CQ on Olivia
16/500 on 7.037 for hours without any response. Is there a meeting
frequency or a page to arrange a sked?
Regards,
Dave
___
FlexRadio Systems Mailing List
I should have changedt he subject heading on that last email sri.
On 13/03/2011 9:34 PM, David Walker wrote:
I know that digi modes are popular but I've been calling CQ on Olivia
16/500 on 7.037 for hours without any response. Is there a meeting
frequency or a page to arrange a sked
That seems to have fixed it. Thanks Tim.
Dave.
On 23/02/2011 1:11 PM, Tim (W4TME) wrote:
I just finished discussing this situation with the Firewire developers
and here is their recommendation for setting the 1394 Windows driver
type when using the 3.5.5.10185 Firewire driver that was
I was keen to get home from my vacation to plug in the new version of SDR.
Works perfectly on CW. Excellent job flexradio.
Regards,
Dave.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Hi folks,
On my Athlon II 3GHz Win64 OS and using the onboard firewire (VIA) of my
Mo Bo M489TD Pro / usb3 my cpu usage swings wildly from 3% to 30%
running PwrSDR. The 4th core can get up of 99% of usage occasionally
and when this occurs audio cracks and pops and CW keying timing falters
a
Okay Jerry. I have Win7 and should probably get it tuned up remotely by
that bloke around here ummm what's his name again :-)
Dave
On 2/02/2011 3:45 AM, Jerry Flanders wrote:
I forgot to mention - I run my SDR-1000 at only 48 KHz sampling, which
is probably less of a load than faster
Jerry,
That is spectacularly low CPU usage. I have a Athlon II X4 640 that has
a faster clock speed of 3Ghz and I still get CPU loads from min 6% to
29% and the 4th core runs heavily on my machine.
Cores 1, 2, and 3 hardly motor on my PC but Power SDR seems to want to
monopolise and flog
Hi folks,
I am contemplating a shuttlepro for tuning. I was wondering if there is
any latency between the device and the tuning of the radio?
Sorry if this has been the muse of countless prior discussions that I
have missed.
Regards,
Dave
___
Hi folks,
Here is a cut n paste from the System Scan from the Flexradio Driver.
The lucent FW card has been removed but still shows up. My question is
which would be the better FW card to use? Or would it make no difference.
Cheers,
Dave.
1:
Vendor : (1106)
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim Ellison
Sent: Wednesday, January 12, 2011 11:43 PM
To: David Walker; flexradio@flex-radio.biz
Subject: Re: [Flexradio] Which Firewire Vendor
Try the Lucent card first. It has
Yes Mike... that is the same issue I have and it occurs quite often.
Thanks for your info. I will tag your response in my mailbox as
'important'.
Dave
On 9/01/2011 8:12 PM, Michael Ruttenberg wrote:
I get a variation of this issue below on the Flex3000. I get the demo screen
quite often
:06 PM, David Walker vk...@bigpond.com
wrote:
Hi Neale,
I have a graphics card that can run 2 displays but I've only
connected the
1 23 monitor through the DVI. I've never had a second monitor
attached.
I have reverted to PwrSDR version 1. And I have the radio up
Hi folks,
PowerSDR has stopped running on my machine. I can't bring it up at
all. I've uninstalled and deleted all the user %App directories and
reinstalled and PowerSDR 2.0.16 - but it won't display on screen. It
shows as running in the task list but there is nothing on the display.
, 2011 at 7:26 PM, David Walker vk...@bigpond.com
mailto:vk...@bigpond.com wrote:
Hi folks,
PowerSDR has stopped running on my machine. I can't bring it up
at all. I've uninstalled and deleted all the user %App
directories and reinstalled and PowerSDR 2.0.16 - but it won't
Hi,
After a Window 7 update my powersdr stopped running. The flexdriver
shows the radio connected but PwrSDR won't run. I can see it is running
as a 4K process in system.
I've uninstalled and reinstalled SDR 2.0.16 but I can't use the radio.
Any ideas?
Dave
I have reverted back to 2.0.8 - that is working.
On 22/12/2010 3:29 PM, David Walker wrote:
Hi,
After a Window 7 update my powersdr stopped running. The flexdriver
shows the radio connected but PwrSDR won't run. I can see it is
running as a 4K process in system.
I've uninstalled
Hi folks,
I have reinstalled 2.0.16 and the radio is working again.
Cheers,
Dave
On 22/12/2010 3:55 PM, David Walker wrote:
I have reverted back to 2.0.8 - that is working.
On 22/12/2010 3:29 PM, David Walker wrote:
Hi,
After a Window 7 update my powersdr stopped running
Hi all,
I upgraded to a ASUS M4A89TD PRO/USB3 with an Athon2 3Ghz CPU with
G.Skill Ram ( not compatible in dual channel mode, so I'll need to
exchange. Currently the 2.4G is on A1 and A2 in order to get this thing
to boot.) ((this ram will be exchanged for kingston or something more
I have made some improvement to my situation by overclocking the
2.13Ghz CPU to 3.01Ghz. I run this until after christmas and then get a
new board and CPU.
Many thanks for the info and suggestions.
Dave.
On 1/12/2010 12:02 PM, Tim Ellison wrote:
Would getting a better graphics improve the
Hi,
I tend to use the smallest PSDR window size possible to minimise my CPU
load which is normally between 8 and 20%. On the odd occasion I wish to
maximise the screen the CPU load increases to around 20% to 48%.
I only have an ATI Raedon X300 PCI-E graphics card with 520MB onboard
RAM;
system (CPU, etc.)?
73
Neal Campbell
Abroham Neal Software
www.abrohamnealsoftware.com http://www.abrohamnealsoftware.com
(540) 645 5394
On Tue, Nov 30, 2010 at 5:38 PM, David Walker vk...@bigpond.com
mailto:vk...@bigpond.com wrote:
Hi,
I tend to use the smallest PSDR window size
the latest Win7 drivers installed.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of David Walker
Sent: Tuesday, November 30, 2010 5:38 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] Maximised Window CPU Use
Hi
I notice if I click a button with the mouse I can repeat the action
using my Space Key. So if I press the PTT using the mouse I can
thereafter use my space key to toggle PTT which is excellent.
I don't know if I'm the last person to know this but I'd thought I'd put
it out there.
I notice there are Firewire 800 cards out there and these require an
adaptor for connecting FW400 devices like the FLX3000. Would there be
any advantage in running an 800 card with the radio?
___
FlexRadio Systems Mailing List
Hi folks, I am using Windows 7 and was wondering IEEE driver in Win7
flex recommend we use. There are 3 drivers - LSI, Legacy, and Standard
IEEE. I was using the LSI and changed to the standard driver this
evening. I can't say I notice much difference.
Cheers
Dave
Hi Brian,
I doubt that Linux would be more efficient that windows. Linux does
benefit by having less code bloat but in other areas it doesn't do much
better than the Windows OS. I think people bowl for linux because most
of the software is free, configurable and it grows away from
Hi,
I made the jump from 1.X.X to 2.0.16 last night and everything went
flawlessly. I uninstalled all previous drivers and software beforehand
as per the documentation. It took me less than 10 minutes and a reboot.
I run Win7x64, Core Duo, 8G ram system.
There is a noticable improvement
Hi,
I'm have MixW setup on DDUTIL. Everything is jumping around from USB
to LSB. The frequency goes from 7032 to 293099 to 17877 and then back
to 7032.
I cannot for the life of me get it to stop switching. Any advise?
Dave
___
FlexRadio
Disabling CAT Control stopped the switching. But now I have no auto
tracking of radio frequency.
On 17/10/2010 2:18 PM, David Walker wrote:
Hi,
I'm have MixW setup on DDUTIL. Everything is jumping around from USB
to LSB. The frequency goes from 7032 to 293099 to 17877 and then back
PM, David Walker wrote:
Disabling CAT Control stopped the switching. But now I have no auto
tracking of radio frequency.
On 17/10/2010 2:18 PM, David Walker wrote:
Hi,
I'm have MixW setup on DDUTIL. Everything is jumping around from
USB to LSB. The frequency goes from 7032 to 293099
Hi all,
Has anyone figured a way to get Win-EQF CW keyer working with PowerSDR?
I have the cat going via DDUtil but I can't use the contest keyer. I
did read that EQF uses actual IRQ and needs to connect from an real COM
port and a transistor switch needs to be made to key a radio. Has
Hi folks,
Is there any benefit to running 48000 kps over 96000 bandwidth on the
flex. My current settings is 1024 x 96000. I would assume (maybe
wrongly) that 48000 would provide less latency and perhaps better filtering?
Regards
Dave
___
Does anyone know if there would be a performance improvement by
upgrading 677 ddrII ram to 800 ram?
I have duo core 2.13 mhz intel cpu and plan to put 8GB of ddrII 800 ram
into the machine.
Dave
___
FlexRadio Systems Mailing List
Steve et al.
I have a Gigabyte GA-965p-s3 with a 800mhz FSB. I currently have 2x2GB
ram ddrII 800 and 2x1GB 667 ram installed. i am thinking of removing
the 2x1GB 667 ram and having 4x2GB 800 configuration. The OS is Win7-64.
Cheers,
Dave
On 08/10/10 18:07, Steve Sterling wrote:
It
Hi,
I've got my radio back and on air. Thanks to FlexRadio systems for
fantastic warranty support. Their responsivity to a fault in the radio
was amazing. Great dealing with you guys.
I have installed Windows 7 64bit and the radio works well for about 30
minutes and then the audio
be the root cause of the DPC
latencies.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of David Walker
Sent: Saturday, October 02, 2010 5:53 AM
To: flexradio@flex-radio.biz
Subject: [Flexradio] Windows 7 x 64 bit of an issue
Today I installed 4 GB RAM into my PC. I now have 6GB RAM on my
Windows7 x64 system. The crackling audio problem has disappeared.
Many thanks Tim.
Dave
On 03/10/10 03:31, Tim Ellison wrote:
4 GB of RAM total for a 64-bit OS is the absolute bare minimum. I have at
least 8 GB of RAM in
This hotfix got me going.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base:
Hi Mark.
I discovered all my concerns about CW latency was not necessary. I use a sonet
allegro FW pci-express card. i don't notice any keying latency issues with my
3000. I am still using version 1 software. I get a little rfi interference to
keying on 10m band but i can get that easily
Hi folks,
Is the NR function working on the new PowerSDR version 2 I grabbed from
the flexradio site?
I installed the firmware and software for my 3000 and the NR was quite
profound initially but then when it recovered it did not seem to have
any effect. Is this typical?
I tried
reduction.
My observations seem consistent between 2.0.6 and 2.0.8 with my Flex-1500
-N2GZ/1
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of David Walker
Sent: Tuesday, August 24, 2010 5:03 PM
To: flexradio@flex-radio.biz
Hi guys,
My flex arrived today and it's up and running after I fixed a firewire
problem with XP with a hotfix.
I have a buzzing problem with my headphones and it seems to be connected
to the fan operation because as the fan speed increases the buzzing
changes accordingly.
Is there any
What new features will the S meter bring that the current Flex SDR
doesn't provide?
Giuseppe Campana wrote:
Hi,
first beta release (not for testers) of BobSmeter for PowerSDR.
Pictures and info at bottom of:
http://www.woodboxradio.com/uk/BobMeters.html
Hi folks,
The CW issue with the 5000A does the delay occur using an external
keyer? I am not yet an owner but contemplating the Flex option. I am
yet to see a youtube of the flex transmit CW, all video of the flex is
on RX. I am primarily a CW op but only at speeds of around 18 to 25wpm.
82 matches
Mail list logo
