Not entirely true.
Eterlogic's VSPE only has virtual ports for as long as the 'control
panel' application is active. When it is shut down the VSPs disappear. I
fell foul of this quirky behaviour early on.
On 02/05/2013 15:46, Jim Jannuzzo wrote:
VSP emulators do not shut down when the
satisfaction. I hope the latest instalment offers as much usefulness as
the first two have apparently done. The 'Setting Up TX Audio' video can
be found at: http://www.youtube.com/watch?v=2trJjUObLkY
All the best and keep on Flexing!
Nige.
___
FlexRadio
Nige.
This is the last cross-post I will make to the two reflectors.
On 27/04/2013 07:50, Nige G7CNF wrote:
Arising out of the first two videos, it quickly became apparent from
private emails that there was a need for a closer look at setting up
the TX audio. This is another long video
Demonstrating PowerSDR 2.6.4: http://www.youtube.com/watch?v=YLrvpC9hmxQ
73
Nige.
On 22/04/2013 12:49, Andrew O'Brien wrote:
Good idea, Thanks.
Andy
On Mon, Apr 22, 2013 at 1:54 AM, Tim Taylor tim-tay...@comcast.net wrote:
Andy,
Go to the Flex home page and download PSDR. Install
Copied and pasted from a much earlier post, settings which seem a good
reference point.
All the best,
Nige.
Change PowerSDR settings after a new Database is loaded
DSP settings
NR ANF Buffers NB
40
Marty.
Go to Flex downloads: http://support.flexradio.com/Downloads.aspx
In the left hand criteria select 'Any'. In the right hand side select
Audio I/Q. Leave the keyword blank. Download one or more of the .wav's.
In PowerSDR select [Wave]. In the playlist pane click [Add] and select
one
Just bear in mind that without that added preamp you probably won't have
enough input to trip the VOX without shouting, unless you use outboard kit.
73
Nige.
On 28/03/2013 19:49, Rob Keijzer wrote:
Ray,
This is normal. The front receptacle has it's signal fed through an
additional preamp.
I
Joe.
You could try the signed com0com driver.
http://code.google.com/p/powersdr-iq/downloads/detail?name=setup_com0com_W7_x64_signed.execan=2q=
I have been using Eterlogic's VSPE
http://www.eterlogic.com/Products.VSPE.html for a long time. 32 bit is
free, 64 bit is $24.95
73
Nige.G7CNF
.
For anyone interested this video can be found at:
http://www.youtube.com/watch?v=87TI9rXxGYg
Many thanks for all your kind comments, I hope the videos prove useful
enough to help you make an informed decision should you be contemplating
one of these units.
One of the best and 73's
Nige
at
http://youtu.be/yeA8yyiK0X4
73's
Nige.
Re: [Flexradio] 2nd request-Heros
http://www.mail-archive.com/search?l=flexradio@flex-radio.bizq=subject:%22Re%3A+%5BFlexradio%5D+2nd+request-Heros%22
Robert Costa, KB6QXM
http://www.mail-archive.com/search?l=flexradio@flex-radio.bizq=from:%22Robert
Sorry if already covered but have you done rx tx sound card
calibration in DM?? Also determine the DM sample rate and set your sound
card (i.e. VAC sample rate) to a clean multiple, seen some pretty heavy
jitter when the conversion isn't clean.
On 12/01/2013 16:49, Steven Catani wrote:
Have you checked the mixer? Under normal operation the headphones can
often be way too loud for me, I have to adjust both the mixer and the
main console volume for best balance.
73
Nige.
On 10/01/2013 19:23, paim wrote:
is there that flex will improve the volume to the headphone ?
is any
modes? Does the thin client have the ability to connect to VAC?
I find myself drawn to this radio like a moth to a flame. . . I have a
feeling I might be selling my soul for one. . .
73
Nige.
___
FlexRadio Systems Mailing List
FlexRadio@flex
the
purchase of a key. There is a signed a version of com0com for 64-bit but
it is not available from their website as it has been independently
signed; a Google search should track it down easily enough.
Best wishes,
Nige.
On 01/01/2013 20:20, Burt wrote:
Windows eight is sure different
When I
Is there a video available other than the hamvention ones circulating on
YouTube of the 6k in operation? Sorry if I've missed a link but I've not
seen one.
73
Nige.
On 29/12/2012 13:15, Tim Ellison, W4TME wrote:
Greg,
A keen observation. What you are observing is the different band
As some of you are no doubt aware, the UK's allocation on 60m will
increase on January 1st with some channels now having up to 12.5khz
(AM on 60m :-S). Is there a 'tool' [read as system/facility/etc.] to
alter the pretty blue channel markings?
73
Nige
this stab at DV.
At little over 1kHz wide for a reasonable quality (bear in mind it is
only 1kHz!) the codec shows great promise and it is open source, none of
this proprietary codec nonsense!
Take a look if you get two minuteshttp://freedv.org http://freedv.org
Nige. G7CNF
weekend to all.
Regards
Mathias
HB9DOU
2012/12/9 Nige G7CNF g7cnf.n...@gmail.com mailto:g7cnf.n...@gmail.com
Looks like your window has managed to position itself outside the
desktop boundary. Right-click the task bar icon and select [Move]
then without doing anything else press the cursor
inside the boundary again.
73
Nige. G7CNF
On 09/12/2012 01:12, Mathias Krüger wrote:
Hello,
after 1 Week not using my FLEX-1500 with PowerSDR v2.4.4 i can start
PowerSDR as usual. The startwindow with the progressbar is visible. Then
the window faded out and nothing is visible, no PowerSDR
Clicking on any part of the table or try to do anything in this app
results in an unhandled exception (W7x64).
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
** Exception Text **
: [Flexradio] Blown finals
that's so strange ,that you should have blown finales,, have done a lot
with Flex's
and have never heard of a blown finale .
but whatever the case ,, hope all goes well
Rich
On 10/17/2012 10:18 AM, Nige G7CNF wrote:
To any UK Flexer who might find themself in the same position
Hi guys.
Following an unexpected high SWR condition on 10m (@80w full carrier),
the PA failed to fold back for some reason and smoked them. To save me
the bother of opening the box prematurely, could someone tell me which
MOSFETs are used, please?
Regards,
Nige
Cheers. Managed to confirm that. Now the trouble is I can't find any in
the UK - any help appreciated.
Nige.
On 17/10/2012 12:57, dan edwards wrote:
pair of rd70hhf's in push-pull, i THINK73, w5xz
--- On *Wed, 10/17/12, Nige G7CNF /g7cnf.n...@gmail.com/* wrote:
From: Nige G7CNF
To any UK Flexer who might find themself in the same position, courtesy
of N1DL the F5K's finals are also used in the Icom IC-7000. The
RD70HHF1's were in stock @ £44ea. That's about middle of the road from
the prices I obtained but the only supplier to have them in stock.
Nige.
On 17/10
Regrettably I don't have a 10m handheld Nor a 6m one for that matter.
Cheers.
Nige.
On 01/10/2012 18:24, Brian Lloyd wrote:
On Sun, Sep 30, 2012 at 5:43 AM, Nige G7CNF g7cnf.n...@gmail.com
mailto:g7cnf.n...@gmail.com wrote:
How does one measure or scan for sub-audible tones
How does one measure or scan for sub-audible tones on Psdr if the
repeater credentials aren't known? My previous radios all provided this
function.
Regards,
Nige.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex
It may not be helpful as I've not used WSJT for a while but there was a
bug which prevented WSJT from being able to key a radio using a COM port
above 10. Depending which version you have this *might* be one possible
solution.
Regards,
Nige.
On 22/09/2012 07:22, Ulf Holt wrote:
I have had
David.
Contact Eric (e...@flex-radio.com), he should be able to sort you out by
providing you an application to accommodate situations like this; I
needed the same solution for my 5000 a year or two ago. You have not
wasted your money ;o)
Best wishes,
Nige.
On 14/09/2012 18:27, David
2.4.4 working fine but the installer leaves behind 2.3.5. Can I
uninstall this now?
Nige.
On 05/09/2012 15:10, Rich - W3ZJ wrote:
Changing modes form any mode to an SSB mode turns off VAC1 even though
Enable for Digital modes. Disable for all others is NOT checked. I
need VAC1 enabled
Nuts, they wouldn't ship it to the UK, that's for sure :o(
Nige.
On 28/08/2012 18:58, Kevin Hartley wrote:
If anyone is looking for a used, 9/10 Flex 5000A, Radioworld has my used Flex-5000A W/ATU,
Granite FW cable, FW card custom dust cover for sale on their website www.radioworld.ca
Treaty - No barrier to free
trade and he cited hams as being one of the biggest threats...
[/rant]
Glad that's off my chest.
Nige. G7CNF
On 23/08/2012 16:17, Patrick Greenlee wrote:
--
Won't the RohS solder fail in Flex before 50 years
to that function nicely.
All the best,
Nige.
G7CNF
From: flexradio-requ...@flex-radio.biz
Sent: Saturday, October 30, 2010 5:00 PM
To: flexradio@flex-radio.biz
Subject: FlexRadio Digest, Vol 66, Issue 30
Send FlexRadio mailing list submissions to
flexradio@flex-radio.biz
Message: 1
Date: Fri, 29 Oct
Is there any further news of this radio panel?
Nige.
Re: [Flexradio] Mouse vs. knob vs. tune step size - WAS: Speakerset-up
Simon (HB9DRV)
Thu, 02 Jul 2009 13:22:30 -0700
- Original Message - From: Brian Lloyd brian-wb6...@lloyd.com
And my experience seems to be substantially
When changing from from VHFx to 6m, the Drive level which has been set in VHFx
(or transverter form) is superimposed on the 6m drive level. The potential to
damage equipment without protection is present.
This problem has been observed to affect 10m also.
Observed in: 1.19.3.3519
73
Nige
Hi.
Would it be possible to have a snap-to centre on the sliders for the RX1, sub
RX2?
Thanks
Nige.
G7CNF
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http
of headphones go along way when
aligning the audio, it does pay big dividends.
73 y'all.
Nige.
G7CNF
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail
Steven.
A couple of days back I was watching a 9A and an SP @ 20KHz wide. . . Sure
makes finding the culprits easy. Interesting to note that I later found out
both were using FT-2000's. . .
73
Nige.
___
FlexRadio Systems Mailing List
FlexRadio@flex
were working.
Well, a manual notch with user selectable or draggable width would be most
useful. More useful still would be a twin manual notch, you know, like that
conventional radio the Icom IC-7000 has. I'm quite envious really. . .
73
Nige
and ant 2 connected to
a broadband vertical. When using Ant 1 obviously i need TR switching. When
using Ant 2, keying the amp, on port 1 is superfluous and actually unwelcome.
Is it possible to have the TR switching relay remembered per antenna, per band?
Regards,
Nige.
G7CNF
Hi.
On Nov 28 2009 I left a message on the Flex support forum, asking about the
status of the Feature Request List. That has remained unanswered for 6
weeks.
So a kindly word from a Flex representative would be welcome.
73
Nige.
___
FlexRadio
to the Flex XML DB?? I have xml editors coming out of my
ears so it is something specific to Flex I am looking for. I note that
although purchased from a UK retailer, the radio comes out of the box with a
US band plan. Was this an oversight by the retailer, or Flex?
Your comments would be welcome.
Nige
41 matches
Mail list logo