Mark make sure that SR is off and you have "Channels" in skimmer set to
Left/Right=I/Q.
Just a wild guess, can't get to the radio just now.
Ron
K0IDT
On 12/12/2014 9:59 PM, Mark Lunday wrote:
Flex 3000, SDR 2.7.2, CW skimmer 2.8
When I tune the Flex VFO, I see signals on the skimmer moving i
All the recent SDR-1000 questions reminded me I have one sitting on the
shelf that needs a new home.
SDR-1000, 100watt, internal tuner $450 plus shipping. No sound card, I
used it with Ozy/Janus HPSDR
boards that are not part of the deal. The price is firm and if it
doesn't sell I may break it d
And another one
http://www.downloadhelper.net/
Ron
K0IDT
- Original Message -
From: "Randy Pence"
To:
Sent: Wednesday, January 01, 2014 5:51 PM
Subject: [Flexradio] Flex Videos
Hello
I am aware the reflector is not very active any more. I am going to ask a
question here instead o
Mark if it's an older version of VAC in the original purchase email
it may not work. Try changing it to 4.13 in the URL that you have,
I think that's the latest version.
Ron
K0IDT
- Original Message -
From: "Mark Lunday"
To: ;
Sent: Saturday, December 28, 2013 5:37 PM
Subject: [Flexr
I just did the upgrade, all went smoothly including DT.
I'm getting some pretty bad flickering on the waterfall and
panafall displays, changing frame rates has no effect.
Flex 5k, Win7 32 bit. HD6870 video.
Ron
K0IDT
___
FlexRadio Systems Mailing List
Larry make sure to turn off spur reduction for CW Skimmer
to display the correct frequency.
Ron
K0IDT
- Original Message -
From: "Larry Bryan"
To:
Sent: Wednesday, November 06, 2013 2:11 PM
Subject: [Flexradio] CWSkimmer
I decided to try CW Skimmer with my Flex 5K I have read the
I can give you at least 3 callsigns on eHam that are just waiting to trash
anything Flex even though they don't own one. Better to get reviews on this
list..just my opinion and personal experience.
Ron
K0IDT
- Original Message -
From: "Richard Solomon"
To:
Sent: Sunday, Octobe
Is there an easy way to tell if my 5K has the 160m spur mod done
before I bother the guys at Flex?
Thanks
Ron
K0IDT
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archiv
The rumor list already exists, it's called eHam SDR forum. Don't bother
going there to check unless you like really, really nasty people.
Ron
K0IDT
- Original Message -
From: "Larry Bryan"
To:
Sent: Friday, August 30, 2013 1:23 PM
Subject: Re: [Flexradio] FlexRadio Digest, Vol 100,
Mike try this
http://www.rtl-sdr.com/tutorial-drm-radio-using-rtl-sdr/
About halfway down the page there's a link to the required DLL,
it's compiled and ready to go.
Ron
K0IDT
- Original Message -
From: "Michael Logan, KB7IUV"
To: "flexradio"
Sent: Wednesday, June 26, 2013 1:56 AM
S
It's not going to happen. If there was enough demand for a 2m-1296
rig you would have it already from the Big 3.
Ron
K0IDT
- Original Message -
From: "Les Rayburn"
To: "Ken Alexander"
Cc:
Sent: Monday, May 20, 2013 12:37 PM
Subject: Re: [Flexradio] The Dirty Little Secret of Firmw
Wait for an offical announcement. Rumors, Dayton rumors at that, are not helpful
no matter the source. If it's true then there's a huge gap between the 3000 and
6500 in both price and preformance. If you want RX2 you'll pay 3x the price of
of the 3000 to get it. There may be something we don't kno
Have you tried any other Hell software? Fldigi, Hellschrieber by IZBLY,
MultiPSK?
I run Feldhell with Fldigi and never had a slant problem. Also if you're
running
things through VAC what soundcard are you calibrating?
Ron
K0IDT
- Original Message -
From: "Steven Catani"
To: "flexr
Brian try this:
In WSJT Setup/Options I have:
Audio In: 2
Audio Out: 1
Not sure why you were trying the other combos. If you're running
JT65 on hf then get JT65-HF, much easier to setup and run.
Ron
K0IDT
- Original Message -
From: "Brian"
To: "Flex-radio Reflector"
Sent: Wednesda
] New PC components for a 1500?
Can you explain the thinking behind that? At this point I'm willing to
try anything if I can find a suitable replacement battery around here
but I'm not sure I follow why that would cause the issues I'm having.
Michael
On 11/19/2012 4:49 PM, Ro
Change the BIOS backup battery.
Ron
K0IDT
- Original Message -
From: "Michael Tondee"
To:
Sent: Monday, November 19, 2012 2:29 PM
Subject: Re: [Flexradio] New PC components for a 1500?
That was my thought too. I've already run memtest86 but part of the
problem is that the PC won't
Try Roboform, password manger and generator. No connection just a happy
userget the pay version.
Ron
K0IDT
- Original Message -
From: "Robert Costa, KB6QXM"
To: ; ; "'Rich - W3ZJ'" ;
Sent: Monday, October 22, 2012 9:45 AM
Subject: Re: [Flexradio] (no subject)
As this is a ver
Which digital modes Joe? You'll need VAC and possibly DDUtil for
a start if you don't have them.
Ron
K0IDT
- Original Message -
From: "Joe Blair"
To:
Sent: Thursday, October 18, 2012 2:27 PM
Subject: [Flexradio] Digital mode operation
I just recently became a member of MARS. I
In case you missed it in the flurry of Flex 6K activity,
Kenwood TS-990 weighs 57 pounds and price is
between $6 and $10K.fall delivery and it's not a
finished product yet. Darn thing weighs almost as
much as some of my BA's.
Ron
K0IDT
___
FlexRa
It comes with a 12 year old kid to run the radio for you. The bad thing is
you have to feed the little critterplenty of Twinkies and soda work :)
Sorry, Dayton withdrawal. I'll go quietly now.
Ron
K0IDT
- Original Message -
From: "Greg"
To: "Gerald Youngblood"
Cc: ; "Flex
The Flex server will crash at 12:01EDT.we aren't all in Dayton.
Have a great time there Gerald.
Ron
K0IDT
- Original Message -
From: "Gerald Youngblood"
To: "FlexRadio List"
Sent: Thursday, May 17, 2012 9:03 AM
Subject: [Flexradio] Imagine dynamic range so high...
Well, you m
Zack,
What you need is a Hal 9000 hooked to your Flex. It will prevent you from
doing silly stuff or even things you really should do, only thing is it will
call
you Dave. :)
Ron
K0IDT
- Original Message -
From:
To: "Flex Radio"
Sent: Thursday, May 17, 2012 5:25 AM
Subject: [Fl
Use a logging program that has a band map, spot your original frequency
to the map and you can go back with one click.
Ron
K0IDT
- Original Message -
From: "Dave Pease"
To:
Sent: Wednesday, May 16, 2012 12:45 PM
Subject: [Flexradio] upgrade possibility
All I want is an UNDO button
JT65-HF and fldigi for everything else.
Ron
K0IDT
- Original Message -
From: "George Rebong"
To:
Sent: Tuesday, May 15, 2012 10:07 PM
Subject: [Flexradio] Digital Mode
Ok, I have my Flex1500 running to my 6BTV antenna, I am planning to change
my antenna to G5RV. I am a CW guy. So
Wear a nametag Bill or at least a drool bib with your call on it.you won't be
alone :)
Ron
K0IDT
- Original Message -
From: "bill"
To: "John Molenda" ;
Sent: Sunday, May 13, 2012 1:20 PM
Subject: [Flexradio] game changer
I believe I was the person who coined the phrase:
"It'
Dave,
If you bought it direct from Eugene then this might be it
Subject
Your RegSoft.com order has been Authorized!
Return addy
Ron
K0IDT
- Original Message -
From: "Dave Gomberg"
To: "FlexRadio Reflector"
Sent: Wednesday, March 14, 2012 2:26 PM
Subject: Re: [Flexradio] Virtual Au
I just tried to work some split RTTY with the new version, set up my
split and no tx. It took me a few minutes to sort this one out, radio keys,
switches to VFO B but no audio ??? I have RX2 installed and set up a
second pair of VAC cables but wasn't using RX 2 at the time, don't need
to listen t
If you like Chrome take a look at IRON
www.srware.net/en/
Kind of a decrapified Chrome, Google anything comes with a lot
of baggage and undesireable junkbut that's just me.
Ron
K0IDT
- Original Message -
From: "dan edwards"
To: "FlexRadio List" ; "Neal Campbell"
Sent: Wednesday
Again, Revo Uninstaller will get the files a normal uninstall won't.
Ron
K0IDT
- Original Message -
From: "Brett Gazdzinski"
To: "flex Reflector"
Sent: Wednesday, December 21, 2011 10:08 PM
Subject: [Flexradio] got it fixed.
Well, after a good solid 8 hours of doing battle with wi
A couple things, Revo Uninstaller will find most program fragments
and get rid of them if you want a complete removal.
On the audio problem, have you run it through something like Audigy
to see if the "grunge" is visible? Hearing is one thing but a picture
will see clipping and other nasties, mi
Why are we even discussing this? The K3 comes with Kool-aid and the Flex
comes with EGG-NOGand cookies if you're lucky. Elecraft makes really
good radios and so does Flex, no question about it.
Ron
K0IDT
___
FlexRadio Systems Mailing List
FlexRadi
Check your desktop icon size. Just went through this with a friend
and his icons were at 125% causing the problem.
Ron
K0IDT
- Original Message -
From: "Hunter Ellington"
To:
Sent: Saturday, December 10, 2011 3:43 PM
Subject: [Flexradio] Screen Anamolies
I upgraded to PowerSDR 2.2
Burt, it sounds like you have anti-virus or some other
software running a scan when you first start up. A lot
of that type software wants total control and won't let
us really dumb users do anything until it's finished.
think Hal 9000.
Ron
K0IDT
- Original Message -
From: "Burt"
My vote is for them.S-9 WSPR signal?? Way too many WSPR
transmissions are overdriven. Why anyone needs to run yet
another beacon service is beyond me, especially on 30m.
Ron
K0IDT
- Original Message -
From: "Steven Hess"
To: "FlexRadio reflector"
Sent: Thursday, December 08, 20
Ayup
Ron
K0IDT
- Original Message -
From: "Ross Stenberg"
To:
Sent: Thursday, December 08, 2011 5:30 PM
Subject: Re: [Flexradio] Fan noise
I think that Burt wins the award for brevity.
On 12/8/2011 11:09 AM, Burt wrote:
No keep going, I am one of your greatest fans
Burt
Brevit
It's going to be a looong winter and Brian doesn't even
live in SNOW country :)
I'm looking out the window at a bunch of aluminum sticking
up through the white stuff, all my antennas save 2 are on the
ground, the weather closed in before I got the towers repaired.
I don't know that the turboencab
I asked the same question a while back, a search of the archives
should turn up the replies. Look for "rf quiet monitors". The general
consensus was any of the new monitors should be good. I ended
up with 2 Acer S23IHL's and no noise just about 6" from the 5K.
There was a problem with certain Sam
My BOD is sometime in 2003 or 2004, 3-board stack one at a time as
they were released.
The first notice I have archived of PSDR is the announcement on
December 16, 2004 for PSDR v1.0. Also the last notice for console I have
is v1.4 Beta 2 on December 15, 2003I should have a copy of it
somewhe
You're early Drax.how long before the emcomm guys and
*linkers put P3 on all the channels all the time?
The CW ops are already complaining about digi and the
band isn't even open yet.
Ron
K0IDT
- Original Message -
From: "Drax Felton"
To:
Sent: Saturday, November 19, 2011 10:5
JT65-HF, JT-Alert to DXkeeper then to LOTW, couldn't be easier.
DXLabs can be configured to use just what you want.
Ron
K0IDT
- Original Message -
From: "Tony Estep"
To:
Sent: Tuesday, October 25, 2011 5:03 PM
Subject: Re: [Flexradio] JT65-HF
On Tue, Oct 25, 2011 at 4:56 PM, Stev
Ed,
If you setup a custom TX filter, mine is 1000Hz low and 1800Hz high, you will
get more power out with the VAC TX slider set a lot lower than what you are
running.
The only problem with doing it that way is you can't have TX=RX offset turned on
in JT65-HF, if a station is -400 from you then y
Just a note to praise the service I just received on my 5K.
Thanks to Dudley and the repair guys for the fast turn
on my ailing rig, well done!! Now I can play in CQWW,
going to my backup (OMG it has KNOBS) was painful to
say the least.
Thanks,
Ron
K0IDT
__
Center of peak and offset from dial, page 68-69 in my manual.
Ron
K0IDT
- Original Message -
From: "Steven Hess"
To:
Sent: Thursday, September 15, 2011 9:56 PM
Subject: [Flexradio] Question on region of Display.
I have a question on the interpretation of the region circled in the
Okay, it lives! I'm not sure what I did, backed up to 1.1.18 and connected
now 2.1.5 is talking to it. Not receiving yet, it's been on the shelf for a
while
and may need to clean and reseat connectors.
Ron
K0IDT
___
FlexRadio Systems Mailing List
F
I'm trying to get my SDR1K running under Win7 32 bit with the LPT
connection, not the USB/PAR adapter, D44 sound card. I must be missing
something simple in the setup or drivers, PSDR doesn't seem to connect
to the radio. PCI par port on port 3 and address is correct in hardware
setup, PSDR 2.1.5.
Hi Bud,
Did you transfer settings between the PSDR versions? Check to make sure
you don't have a custom TX profile set, use the default profile as a test.
Ron
K0IDT
- Original Message -
From: "Thurman Irving"
To:
Sent: Friday, August 12, 2011 5:46 PM
Subject: [Flexradio] Fail to t
Don,
It doesn't matter which radio, it's PSDR that needs the click tune / Flex Knob
connection. Teamplayer is a rather pricey bit of software that will allow
multiple cursors on screen BUT you still have to click on the app window
to direct focus when running multiple programs.PSDR and N1MM.
I want to thank everyone for the suggestions both on and off list.
The general concensus is all the LCD's are very quiet and the
only problem seems to be the Samsung touch pad. I decided
to go with the Acer after getting a chance to play with one and
reccomendations from the group.the big facto
I'm planning on replacing my 19" Samsung moitors with 23" widescreen ones.
Before I jump and make an expensive mistake, anyone using monitors this size
that
are RF quiet. I notice a lot of the new ones have a seperate SMPS, any problems
with RF getting into the supply or cable? A friend suggeste
Go to the Flex radio wiki
http://flexradiowiki.com/frsradoiowiki/index.php?title=Main_Page
and follow the setup instructions there.Al did a great job on the
writeup.
DO NOT check any offset boxes except the click tune, N1MM
will apply the proper offset to the log once you get it set up.
Ro
Did you reboot after resetting the admin privledges?
Ron
K0IDT
- Original Message -
From: "Brian"
To: "Neal Campbell"
Cc: "FlexRadio"
Sent: Sunday, July 10, 2011 4:23 PM
Subject: Re: [Flexradio] VSP Manager
I am now the administrator!...Just call me root. However...
Well, it n
And don't forget the ones built a board at a time. I have 2 with SN's on the
boards but not the box, one may not even have numbers on all the boards
it was very early production.
Ron
K0IDT
- Original Message -
From: "Tim Ellison"
To:
Sent: Wednesday, July 06, 2011 5:04 PM
Subject: R
Can you "click tune" with the knob? That would be a killer setup
for RTTY contesting.I'm a mouser and something always goes
sideways and the wrong program has focus in the heat of a pile up.
Ron
K0IDT
- Original Message -
From: "Tim Ellison"
To: "Tom Peterson" ;
Sent: Saturday,
Yeah, and you can actually see the RF...but only once
if you happen to look into an unterminated fiber.
When I was still messing with fiber optic we had little detector
cards to check a cut or broken fiber for "light".you couldn't always
depend on the headend guys to kill the lasers.
Ron
You can also try this to clean some of the junk off a new machine.
www.pcdecrapifier.com
Ron
K0IDT
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Greg Zenger [N2GZ]
Sent: Monday, April 11, 2011 10:00 PM
To: supp...@flex
Nothing wrong with some of us, just waiting for a PSDR port to this
http://www.brielcomputers.com/wordpress/?cat=11
The ELF project will have to wait a bit until I can locate more RAM :)>
Still have my docs for the miserable JCL for IBM 360 and some punch
cards for who knows what.
Ron
K0IDT
--
4CX250 should fill the bill as an inexpensive tube.
Plenty of good designs out there and 5 watts will drive it
nicely.
Ron
K0IDT
- Original Message -
From: "Michael Tondee"
To:
Sent: Saturday, August 28, 2010 6:13 PM
Subject: Re: [Flexradio] Linear Amplfier for F1.5K
> On the subjec
A J79 prefix is worth 20db on any band ;)
Ron
K0IDT
- Original Message -
From: "Brian Lloyd"
To: "Ed Stallman"
Cc: ; "FlexRadio reflector"
Sent: Sunday, June 27, 2010 7:38 AM
Subject: Re: [Flexradio] [FlexEdge] I was a pile-up
> Just an observation, but when running WSPR from here
How narrow were the filters?? Anything under 300hz may be too narrow for
decent decoding.
Ron
K0IDT
- Original Message -
From: "Drax Felton"
To: ;
Sent: Tuesday, June 01, 2010 8:39 AM
Subject: [Flexradio] RTTY reception
> Anyone have a good procedure or settings worked out on a Flex
What pray tell is "real ham radio"??
CW only
Emcomm
Public service bicycle chasers
Shack on a belt
Extra heavy..really hate that one and I am
No lids, no kids, no space cadets..if you're old enough to remember
I wonder how many of the "anti-sdr" crowd are running "firmware" defined
radios
Is the Flex web page down or is it just me? Getting a "No Index File"
error when trying to access it.
Thanks
Ron
k0idt
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Arc
Lots of interest but no takers yet, lower price
SDR-1000,100w amp,tuner. Has all the ECO's including the tuner shield, never
any problems.There are two mods, PowerPoles instead
of the binding posts and the front fan opening has been cut out. Includes good
audio cables with ferrites, parallel c
Let me give this a shot..not a noise scientist either.
Noise blankers work on narrow impulse type noise
and noise cancelling works on broadband noise,
think the crap from your neighbors plasma tv. An
oversimplification and there is a bit of overlap in the
kinds of noise each will handle but ma
Okay it's time to part with one of my SDR 1000 radios. This one has the
100w amp, ATU, all ECO's, 4 pin mic connector. I'll include a parallel
cable, audio cables and a power cable with Powerpoles. $950 plus
shipping of your choice, answer off list please.
I keeping the other one, one of the or
BandQSOsPts Sec
3.5 9 97
7 147 147 39
14 9999 29
21 3535 15
Total 290 290 90
Score: 26,100
Team: Flexonia
DX: HI, OK, LA, VP.yeah, I know some of these are NA
but the way the bands wer
"See the ball, feel the ball, BE THE BALL"???
Ignoring the Zen aspects of this for the moment
a new Flex slogan is born. "RADIO WITH BALLS"
Sorry, was double dogged dared...you know who
you are :)>
leaving quietly now
Ron
k0idt
- Original Message -
From: "FireBrick"
To: "Neal Camp
.NET 3.5 required?? I have Pretty Betty running under .NET 2.0, everything
on
the recieve side seems to work okay. Listening to the DRM relay of Radio
China
from Sackville.
Win2Kpro
Core2 duo 1.87gig
2gig ram
D44
Dream 1.6.1
Firefox and some other background stuff.
CPU usage is peaking at 30%
Ro
My SDR1000 power output can't be turned down below
about 80w. I used it for RTTY Roundup and it preformed
without a glitch both days at 40w, turned it back on today
and 80w with the same settings. Ran the drive to zero and
the output stays at 80 w. D44, PWRSDR 1.10.3,
ATUsame in bypass, reb
Found the information I needed. Ver.1 of the amp
install manual has the alignment procedure.
Ron K0IDT
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.m
Check EMRFD for a couple simple designs. M57735 brick
(expensive) 200mw in gets 17w out and there's a single transistor
design that will put out about 3w (cheap).
Ron K0IDT
- Original Message -
From: "Lyman H. Wolfla II" <[EMAIL PROTECTED]>
To: "'Fred Harris'" <[EMAIL PROTECTED]>;
Se
Another $30 on the way..are we there yet?
Ron K0IDT
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Flex
I just got 3 e-mails with this subject...my ISP
trapped them
as containing the Beagle virus.
Ron K0IDT
The price is better from the author..
http://software.muzychenko.net/eng/vac.html
One is $30, price drop to $15 for 50-99 copies and $10 for
100 plus. I sent an email to Eugene to see if a group license is
possible, I'll post the reply.
Ron K0IDT
Thanks Bob, no hurry it was only a wish. Gotta love the guru's
on this group.
I just got a note that the TAPR Reflock II should be available
in about month..pictures and more information here:
http://gref.cfn.ist.utl.pt/cupido/reflock.html
Ron K0IDT
- Original Message -
From: "R
Only one item actually. I would really like to see true
FSK added. No worries about overdriving, no garbage
from the sound card being sent and a bit easier on the finals
I think. Just a thought but then again I've been listening to
diddles for a looong time :).
Ron K0IDT
I sent this information to Brian direct but
misplaced the link.
This is from the Santa Cruz FAQ at:
http://www.turtlebeach.com/site/kb_ftp/585.asp Santa Cruz: Multiple Santa Cruz in the
same PC?
Q: Is there a way to use to sync two cards together to allow sync'ed
8 channel analog
76 matches
Mail list logo