Dan:
Welcome to the FlexRadio world! There is a process in Windows called
Deferred Procedure Call or DPC. This is the mechanism that Windows uses
to bounce between programs to give the appearance of doing many things at
once. Excessive DPC latency due to badly behaved programs and drivers can
: [Flexradio] panadapter freeze
Dan:
Welcome to the FlexRadio world! There is a process in Windows called
Deferred Procedure Call or DPC. This is the mechanism that Windows uses
to bounce between programs to give the appearance of doing many things at
once. Excessive DPC latency due to badly
Howdy...
just set up my used, new to me, Flex 3000. After it is on for a minute or so
the panadapter freezes and the audo stops. I click stop then restart it ...its
ops normal.
wonder whats happening...
has anyone else out there had the same problem and whats the fix. huumm.
73
danno
Hi David,
I have seen a similar problem with my Flex3000.
Klaus@Flex EU Support and I have been working on this.
I also have a Clicking sound at regular intervals on all bands which
shows on the panascope as spikes, the panadapter pauses with each Click.
I am also running Win XP SP3 ...
Open
David,
Under PowerSDR setup/CATcontrol, make sure the Allow Kenwood AL command
box is not ticked.
Regards,
Craig
VK0JJJ
On 16 April 2013 22:24, Mike mi...@m0aws.co.uk wrote:
Hi David,
I have seen a similar problem with my Flex3000.
Klaus@Flex EU Support and I have been working on this.
What happens when you disconnect the antenna?
On Tuesday, April 16, 2013, Mike wrote:
Hi David,
I have seen a similar problem with my Flex3000.
Klaus@Flex EU Support and I have been working on this.
I also have a Clicking sound at regular intervals on all bands which
shows on the
I seem to have the same problem previously reportedseems to appear after
using tune control. Initially appeared after playing with simultaneous RX on
A/B Clears if PSDR stopped and re-started. I saw Tim had a post re: this
in the KB...mentioned RX re-calibration? Thoughts?
Bob K4RCG
I am using PSDR 2.3.5 with a Flex 1500.
I can not get the frequency I am listening to in the center of the pan adapter
display at zero zoom?
The pan adapter display shows the freq I am listening to (within the filter
passband) on the right side of the screen, about 2/3 of the way on the right.
My new Flex-Control has arrived and I tried to install it on my new Flex
5000 under Windows 7 Professional 64 bit.
I tried to follow the included instructions with blind obedience so as to
not wander off the straight and narrow but no joy, I got the message
predicted by the instruction sheet,
I installed 2.3.5 today: I have set averaging to 333ms, main display to
25FPS. The waterfall part of the display is averaging 9=OK and reacting
to different time settings), yet the panadapter part of the display goes
real time, and is getting very busy, and does not react to different
time
My panadapter is in a mode I'm not sure how to cancel.
The ability to adjust filter width has been replaced with a set of yellow
cross hairs.
How do I turn those off?
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Drax,
Right-click anywhere on the Panadapter. Right-click again to turn them back
on. If you have MultiRX on or have RX2 turned on (FLEX-5000), the
right-clicking cycles through yellow crosshairs (VFO A), red crosshairs (VFO
B), off.
The yellow crosshairs indicate that you have turned on
Flex'ers,
Rig=Flex5K; PSDR=1.18; latest drivers and firmware.
Question: I wish to change the horizontal scaling of the panadapter so more
bandwidth is seen. Even at the widest (0.5) display setting I can't see the
target frequencies that I wish to view. In setup; display you can change
: [Flexradio] Panadapter horizontal scaling
Flex'ers,
Rig=Flex5K; PSDR=1.18; latest drivers and firmware.
Question: I wish to change the horizontal scaling of the panadapter so more
bandwidth is seen. Even at the widest (0.5) display setting I can't see the
target frequencies that I wish
- W4YXU
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim Ellison
Sent: Saturday, October 23, 2010 11:17 AM
To: rich kennedy; flexradio@flex-radio.biz
Subject: Re: [Flexradio] Panadapter horizontal scaling
Setting
will provide the widest Panadapter view.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz [mailto:
flexradio-boun...@flex-radio.biz] On Behalf Of rich kennedy
Sent: Saturday, October 23, 2010 12:09 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] Panadapter
some day.
From: Pete M
Sent: Saturday, March 14, 2009 11:20 PM
To: flexra...@yahoogroups.com
Subject: Re: [SPAM]Re: [FlexRadio] Panadapter Freeze (Brief)
Made no difference either way.
Pete
- Original Message -
From: Tim Ellison
To: flexra...@yahoogroups.com
Sent: Saturday, March 14
, like
MixW.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Mark Ericksen
Sent: Sunday, March 15, 2009 5:18 PM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] [FlexRadio] Panadapter Freeze (Brief)
I have found
On Sun, Mar 15, 2009 at 2:18 PM, Mark Ericksen meric...@tampabay.rr.com wrote:
I have found that with my SDR-1000 and my 5000A, and with any version of
PowerSDR that I have used, if I click on the Title Bar of the PowerSDR window
the display will freeze for a second or two. The audio
This panadapter is new to me so I have never seen such a thing. There are
some severe storms approaching the area although not very close. My
panadapter display looks like the scalloped edge of a table cloth or
something. EVERY 10KHz the signal peaks and there is a squawking noise at
From: [EMAIL PROTECTED] [EMAIL PROTECTED] On Behalf Of Stan [EMAIL PROTECTED]
Sent: Saturday, November 15, 2008 6:12 PM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] panadapter scallop design
This panadapter is new to me so I have never seen such a thing. There are
some severe
] Panadapter response time
I wonder if it might be related to the averaging setting.
Ned, K1NJ
--- On Mon, 10/13/08, NU8Z [EMAIL PROTECTED] wrote:
From: NU8Z [EMAIL PROTECTED]
Subject: [Flexradio] Panadapter response time
To: flexradio@flex-radio.biz
Date: Monday, October 13, 2008, 6:34 PM
Just
Just upgraded from SDR-1000 to the 5000. So far I really like it!!
I do have one minor issue that I would like to inquire about. When I tune
using the mouse wheel at a faster rate (say 50hz) the cw signals on the
panadapter turn into a rolling wave as I tune toward the signal. It makes it
You might check the Display Tab in Setup.. Try changing the Align
from Auto.
73,
Dudley
WA5QPZ
Chris Gerber wrote:
Hi Folks
New Release!
Ross stated some differences between former versions. I am seeing the same.
I have several different versions installed for my SDR1000's. So I can
And it just isn't the Panadapter, but the interactive nature of the FlexRadio
Panadapter that makes this possible. Seeing is one thing. ClickTuning to a
desired frequency and dynamically adjusting the filters for maximum S/N is a
WHOLE OTHER BALL GAME
-Tim
-Original Message
If you go to Andy's fantastic site for his remarkable shack, look at
the for sale page:
http://members.cox.net/analogservice/gear%20for%20sale-1.htm
You can find the piece of gear that inspired me to do the panadapter
with Eric. The Heathkit HO-13 was a work of art for its time.
Bob
N4HY
] On Behalf Of Craig Monsen
Sent: Thursday, April 19, 2007 3:15 AM
To: FlexRadio Reflector
Subject: [Flexradio] Panadapter hump
Although I have not been able to get the alpha SDR-X software setup to run
with my Extigy-USB card, I at least can share an observation that I think is
important
Although I have not been able to get the alpha SDR-X software setup to run with
my Extigy-USB card, I at least can share an observation that I think is
important to acknowledge. It appears that much of the spectrum hump on the
panadapter has been attenuated through modifications in the code.
Hello,
I'm sorry if this has been up before, and it probably has
Is there a good reason for why the carrier poit is centered in 1x, 2x and 4x
but NOT in 0,5x zoom??
(This is now, up to SVN854.)
73's
LA4WAA - Stig
-- next part --
An HTML attachment was scrubbed...
URL:
Hi Stig,
You can find the explanation in the manual on pages 51 (chapter 7) and 182
(chapter 11).
Hope this helps
73 de Joe - AB1DO
- Original Message -
From: Stig Rasmussen [EMAIL PROTECTED]
To: flexradio@flex-radio.biz
Sent: Monday, January 29, 2007 17:41
Subject: [Flexradio
I was very pleased with SVN:678 because the panadapter-dataline was very fast
on position after tx (AVG on). In the following SVN's it's slowly climbing up
like it did before SVN:678. What happened ?
When I switch to DRM-mode the panadapter-width changes to 16kc. When I switch
back to another
- Original Message -
From: Ken - N9VV [EMAIL PROTECTED]
To: Martin Hirsch [EMAIL PROTECTED]
Sent: Sunday, September 24, 2006 11:46 PM
Subject: Re: [Flexradio] Panadapter Question
Hi Martin, in one of the Menus you will find the AVERAGE setting. You
can select any rate you wish. I do
PROTECTED]
To: flexRadio@flex-radio.biz
Sent: Wednesday, September 13, 2006 7:10 AM
Subject: [Flexradio] Panadapter delay after TX
I'm a SSB-operator and I mostly use the panadapter-display with AVG on and
AVG-time set to 250ms in the setup. When I set the SDR to transmit mode I
would like to see
Thanks Dan, will post it there
Martin DL5YEJ
- Original Message -
From: [EMAIL PROTECTED]
To: Martin Hirsch [EMAIL PROTECTED]; flexRadio@flex-radio.biz
Sent: Wednesday, September 13, 2006 5:53 PM
Subject: Re: [Flexradio] Panadapter delay after TX
Martin, - Please post
]
radio.biz] On Behalf Of Paul Shaffer
Sent: Wednesday, March 29, 2006 11:59 AM
To: FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] Panadapter at 96k questions
It would be nice to get a comment from flex-radio, perhaps a release
notes
or something on this. From what the DSP developer says, it's
To: '[EMAIL PROTECTED]'; 'FlexRadio@flex-radio.biz'
Subject: RE: [Flexradio] Panadapter at 96k questions
I got a chance to check this out here this morning and I saw the same
thing that Paul did. Basically, it looks like there is an
anti-aliasing
filter around 24kHz on the FireBox, even in 96kHz
]
Sent: Thursday, March 30, 2006 10:46 AM
To: '[EMAIL PROTECTED]'; 'FlexRadio@flex-radio.biz'
Subject: RE: [Flexradio] Panadapter at 96k questions
I got a chance to check this out here this morning and I saw the same
thing that Paul did. Basically, it looks like there is an
anti-aliasing
.blogspot.com
Sent wirelessly via BlackBerry from T-Mobile.
-Original Message-
From: Eric Wachsmann - FlexRadio [EMAIL PROTECTED]
Date: Thu, 30 Mar 2006 10:46:29
To:FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] Panadapter at 96k questions
I should have also mentioned that similar
-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Guy Atkins
Sent: Thursday, March 30, 2006 2:15 PM
To: Flex-Radio Reflector
Subject: Re: [Flexradio] Panadapter at 96k questions
Hi Eric,
Which *external* sound card in the marketplace would be second in line
It would be nice to get a comment from flex-radio, perhaps a release notes
or something on this. From what the DSP developer says, it's a known
condition.
I don't see that here, with version 1.6
Delta44 PCI card
Dell Optiplex 170L
Radio issued Nov.'05
I have the Firebox and PowerSDR
them a personal email).
73,
- Jeff, WA6AHL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Paul Shaffer
Sent: Wednesday, March 29, 2006 9:59 AM
To: FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] Panadapter at 96k questions
It would be nice to get
]
[mailto:[EMAIL PROTECTED] On Behalf Of Jeff Anderson
Sent: Wednesday, March 29, 2006 10:04 PM
To: [EMAIL PROTECTED]; FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] Panadapter at 96k questions
Hi Paul,
I just checked this out with my unit (w/Delta 44) @ 96 KHz. Signal does
*not* disappear at +15kc
I need some advice for the panadapter as I learn to setup sdr-1000
for 96k sampling.
If I tune to a sw broadcast, for example Radio Netherlands at 9.845MHz,
then tune the radio up, the signal moves off to the left and you can see it
on the panadapter out to the 20k mark, but when I tune down,
Paul:
Thanks for asking. I know it is confusing. It is why I resisted adding
the wider scope for so long. People often do not realize the
consequences of their requests and this is one of them. It is NOT a bug.
The signals as they arrive from the radio are below, at, and above the
I have the Firebox and PowerSDR set at 96k, but I have not ruled out a
mistake on my part someplace.
If you tune to 5.0MHz WWV looks perfect. But now tune to 4.985MHz and
it vanishes completely. If this is not what _you_ see with the 96k rate I may
have a problem.
From the description, it
I don't see that here, with version 1.6
Delta44 PCI card
Dell Optiplex 170L
Radio issued Nov.'05
- Original Message -
From: Paul Shaffer [EMAIL PROTECTED]
To: FlexRadio@flex-radio.biz
Sent: Tuesday, March 28, 2006 9:50 PM
Subject: Re: [Flexradio] Panadapter at 96k questions
I have
When selecting the "Soft Rock 40" radio model and then adjusting the Center Frequency option to reflect the exact crystal frequency (7.054200 in my case) I find that the Panadapter display is not re-centered on this new frequency setting. The center of the viewable range is still 7.056000 and as
Does that beta version support the SR-40 or do you have a special
overlay version?
At 06:36 PM 11/8/2005, you wrote:
When selecting the Soft Rock 40 radio model and then adjusting the
Center Frequency option to reflect the exact crystal frequency
(7.054200 in my case) I find that the
Is there a way to broaden the visible spectrom on the panadapter ?
Thanks,
Art
Yahoo! Sports
Rekindle the Rivalries. Sign up for Fantasy Football
Yes:
As soon as we enable the multiple receivers on the console, we are going
to allow you to tune
anywhere in the 40+ Khz spectrum that we can show. It is in our list.
Bob
[EMAIL PROTECTED] wrote:
Is there a way to broaden the visible spectrom on the panadapter ?
Thanks,
Art
Golly, if you have the Panadapter (Display Mode) turned off (to save CPU
cycles) you have not clue why your XMIT power just dropped to zero :-)
Perhaps in the future the High SWR indication could blink the power
button or pop up an alert window or something?
de Ken N9VV
51 matches
Mail list logo