Message -
From: "Tim Ellison"
To: flexradio@flex-radio.biz
Sent: Saturday, March 30, 2013 3:47:28 PM
Subject: Re: [Flexradio] Memory Form
Sounds like the file became corrupted and was reset to the default. Can
you add memories to ant and are they still there after you shut
downPowerSDR an
the memory menu, no form appears but only the window entitled "memory
interface."
Tim2
KK6AUN
- Original Message -
From: "Tim Ellison"
To: flexradio@flex-radio.biz
Sent: Saturday, March 30, 2013 3:47:28 PM
Subject: Re: [Flexradio] Memory Form
Sounds like the fil
Sounds like the file became corrupted and was reset to the default. Can
you add memories to ant and are they still there after you shut
downPowerSDR and reboot the computer?
Tim Ellison
On 3/29/2013 7:09 PM, timger...@comcast.net wrote:
I lost my memory form. All I get is an empty window with
I lost my memory form. All I get is an empty window with the title memory
interface.
Tim
KK6AUN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mai
Dudley,
I have been out of town on vaqcation and have gotten behind o the memory
problem.
As I said, I am not really com[puter literate, but I get by. I have the file yu
sent me in my documents.
Where do I need to place that file in PowerSDR. I still losea all of the memory
frequenies when I
have to re-size the form in order to view
it.
> Date: Sat, 4 Aug 2012 12:25:40 -0700
> From: n12...@yahoo.com
> To: FlexRadio@Flex-radio.biz
> Subject: [Flexradio] Memory Form
>
> Hi,
>
> My memory form does not look like the one in the manual. How do I cause the
> f
Hi,
My memory form does not look like the one in the manual. How do I cause the
freqs to be saved.
Thanks,
Johnnie W6HTY
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Ar
I had a lock up (powersdr stopped working press this button to quit) when
changing sample rate. The next time I started power sdr my memory
interface was blank. I hadnt checked the memories prior to this lock up and
am not sure if they were blank just prior. I remember some reference to
this rece
For future reference and as a general notice t all, it helps *a lot* to
always include full information about your setup like hardware type and
operating system info so we don't have to make assumptions when offering
troubleshooting advice.
I am assuming you have a FLEX-x000 radio. So with t
Hello,
i had PowerSDR v2.0.8 running. I installed v 2.1.5. Both working fine for
me. Then i unistalled v2.0.8 with the result, that 2.1.5 was also mo more
working.I got a* Fatal Error: Attempted to read or write protected memory*.
I removed v2.1.5. an reinstalled it, the error is still the same...
OK. Now I understand. Thanks for the clarification.
That enhancement request for RX2 support in the memory form has already
need entered into the database for future considerations.
Tim Ellison, W4TME
Internet Systems Admin. & Customer Support Engineer
FlexRadio Systems^(TM)
4616 W Howard Ln
with VAC for my digital programs)
May be a collum could be added on the memory form specifying the receiver
RX1/RX2?
John, ve3dvv
--
Message: 3
Date: Sat, 30 Jul 2011 18:47:33 -0400
From: "John Vandenberg"
To:
Subject: [Flexradio] Memory form select not w
This is a consequence of the memories only updating RX1 and having RX2
on the same V/U band as the memory channel designation.
Although I do not fully understand your statement "Since I use RX1 with
VAC for digital stuff I am out of luck!" Can you explain this in more
detail?
-Tim
---
Tim E
The select gives an error when you are using RX2 for V/U. (cannot use UHF on
RX1+ UHF on RX2)
It seems to work only for RX1. Since I use RX1 with VAC for digital stuff I
am out of luck!
Any plans on a fix so it will work for RX2 as well?
John, ve3dvv
It appears that the memory.xml file will be damaged and deleted if PSDR 2.1.5
is not closed prior to shutting down the computer. The memory.xml file is
written when PSDR is closed, however if there is a forced close caused by the
computer shutting down there is apparently not enough time for the
Ray,
Thank you for your response, I really appreciate it and your database
transfer utility.
Maybe I didn't explained well myself about your decision of not
incorporating the function, I was not complaining and I really
understand your reasons. In fact something like the procedure that you
Ignacio,
I said that it would not be incorporated into SDRDataTransfer because it
would be a "throwaway" function. That is, you would only need to use it
once & then never again.
I had actually started to develop a standalone utility that would do the
conversion. Again, I stopped working on it
ent: Sunday, July 24, 2011 4:19 PM
To: 'Dick3' ; flexradio@flex-radio.biz
Subject: Re: [Flexradio] Memory Selection 2.1.5 is poor
I agree! It is a very clumsy process.
Also it would be nice to have the Windows text shortcuts available,
such as
cut, copy, and paste.
Fred W2VQS
---
Thank you, Tim.
Fred
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim Ellison, W4TME
Sent: Sunday, July 24, 2011 4:33 PM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] Memory Selection 2.1.5 is poor
Everyone&#
Thanks Tim!
Stan
-Original Message-
From: Tim Ellison, W4TME
Sent: Sunday, July 24, 2011 5:32 PM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] Memory Selection 2.1.5 is poor
Everyone's suggestions regarding improvements to the memory form are
duly noted and have bee
n to have the "Memory Interface" window open
each
time to select a memory. Then have to click the memory and then click
select. It is clumsy.
Stan, WA2UET
-Original Message- From: Fred Howell
Sent: Sunday, July 24, 2011 4:19 PM
To: 'Dick3' ; flexradio@flex-radio.biz
.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Stan
Sent: Sunday, July 24, 2011 3:48 PM
To: Fred Howell; 'Dick3'; flexradio@flex-radio.biz
Subject: Re: [Flexradio] Memory Selection 2.1.5 is poor
I think there should be a memory button on all the modes and band screens!
Just click the
27; ; flexradio@flex-radio.biz
Subject: Re: [Flexradio] Memory Selection 2.1.5 is poor
I agree! It is a very clumsy process.
Also it would be nice to have the Windows text shortcuts available, such as
cut, copy, and paste.
Fred W2VQS
-Original Message-
From: flexradio-boun...@flex-radio.b
24, 2011 2:55 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] Memory Selection 2.1.5 is poor
The Memory Selection in version .5 is fatal to an operator that changes hf
frequencies often...it takes four selections and two major excursions of the
desktop to select a frequency!!! In past
The Memory Selection in version .5 is fatal to an operator that changes hf
frequencies often...it takes four selections and two major excursions of the
desktop to select a frequency!!! In past versions, a double click on the
desired frequency and you were good to goany help heretnx ...Di
I am one of the operators in the ARRL's 600 Meter Experimental project. I
need to connect an external LPF between my FLEX-5000A and the rest of my
system. It needs to be in the RF line for both TX and RX. I will connect
it to antenna port 2.
When I QSY to the 600 Meter band, it appears as part
again, is it just me ?
F3k, 1256 firmware, 7171 firewire, 1.18.5 software, compatible firewire
card, homebrew rice rocket dual core intel with win 7 32 bit. normally works
just fine. with buffers at 256, normal mode. real nice..
after starting PowerSDR, if i bring up dxLab logger, commander, and
T
San Diego, Ca. (k...@live.com)
Fallon, Nv. (k...@cccomm.net)
--
From: "Ed Stallman"
Sent: Sunday, November 29, 2009 15:01
To:
Subject: [Flexradio] memory upgrade ?
Is their a way to find what memory sticks I have in my computer
without
)
--
From: "Ed Stallman"
Sent: Sunday, November 29, 2009 15:01
To:
Subject: [Flexradio] memory upgrade ?
Is their a way to find what memory sticks I have in my computer without
pulling one out and looking ? All I can remember is I have 2 one Gig
sticks Corsair. While placin
Is their a way to find what memory sticks I have in my computer
without pulling one out and looking ? All I can remember is I have 2
one Gig sticks Corsair. While placing my order for W 7 64 bit, I want
to order 2 more 1 Gig sticks.
Thanks Ed
___
F
23, 2009 10:40 AM
To: Tim Ellison; flexRadio@flex-radio.biz
Subject: Re: [Flexradio] memory setup?
I think someone mentioned using individual copies of PSDR, along with dedicated
databases in separate folders. Would that do it - A PSDR_CW folder, a PSDR_SSB
folder, a PSDR_RTTY folder, etc?
Jerry
I think someone mentioned using individual copies of PSDR, along with
dedicated databases in separate folders. Would that do it - A PSDR_CW
folder, a PSDR_SSB folder, a PSDR_RTTY folder, etc?
Jerry W4UK
At 10:26 AM 11/23/2009, Tim Ellison wrote:
Bret,
Unfortunately the TX profiles are limite
o.biz] On Behalf Of Bret Mills
Sent: Monday, November 23, 2009 12:23 AM
To: 'Brett Gazdzinski'; flexRadio@flex-radio.biz
Subject: Re: [Flexradio] memory setup?
Very easy to do most of the functions you have listed below can be saved in the
"Setup" / "Transmit" / &qu
i
Sent: Sunday, November 22, 2009 7:44 PM
To: flexRadio@flex-radio.biz
Subject: [Flexradio] memory setup?
Hello all flexers.
I am really enjoying my 5000a with the new computer Neal sent me, but have a
question.
I hope I have not overlooked it, but is there any way to save EVERY setting
of the radio?
Brett,
You can make multiple copies of the database, one with each setup that you
desire. Then simply rename (or copy) the one you want to use to
database.xml & start PowerSDR.
With the release of PowerSDR v2.0, this will be easier. In the current
PB-PAL code, and therefore I presume in the rel
Hello all flexers.
I am really enjoying my 5000a with the new computer Neal sent me, but have a
question.
I hope I have not overlooked it, but is there any way to save EVERY setting
of the radio?
I have a number of things I use the 5000 for, sometimes its barefoot,
sometimes its into an ampli
Anyone running a FLEX 5000C know what the two memory sticks are? I would
like to replace them with larger memory sticks. I need to know what they
are and speed. Anything that I can take to the store so that I can purchase
some new bigger ones would be helpful.
Thanks,
Joe White - KE4TV
for the new code branch
-Tim, W4TME
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Norman Robbins
Sent: Tuesday, May 15, 2007 1:45 PM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] memory files
Hi Mike check out this link:
http://kb.flex
Hi Mike check out this link:
http://kb.flex-radio.com/article.aspx?id=10046
Norman / w4hf
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070515/20e44288/attachment.html
Pardon a question from a new user. Is there a way to import PowerSDR
Memory files? I do a bit of SWLing and have these saved for quick
access. The import DB doesn't seem to do this.
Mike NU4Q
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http:/
Duffy and All,
How correct you are. The drop down menu is fine, which goes for
Jeff's release too. Glad you mentioned it, because I probably would
not have found it.
73, Chas W1CG
At 02:29 PM 8/4/2006, Duffy wrote:
>Guy's I don't quite understand why you say the memory controls are "
>missi
Well you're right. I guess with things moving around, I just didn't
notice the dropdown menu for memory. Thanks for pointing this out!
Brian
On 8/4/06, Duffy <[EMAIL PROTECTED]> wrote:
> Guy's I don't quite understand why you say the memory controls are "
> missing " .They were moved to a drop
Guy's I don't quite understand why you say the memory controls are "
missing " .They were moved to a drop down menu called memory, right
above the stby/on switch. Now I agree that they should have remained
where they were, so as to simply click on save instead of having to use
the drop down. Je
I agree about the missing memory. I'm not sure why, but I understand
that the scanning function was removed due to some FCC requirement,
however why remove the user memory data too?
Otherwise, things are really shaping up with PowerSDR !
Thanks,
Brian / w5ami
On 8/4/06, Charles Greene <[EMAIL
Jeff,
I solely miss the memory controls in your latest release(July 29 I
believe). The "last 3" does nothing for me. I suppose you can't make
every one happy and some one has probably said these controls are not
needed but not so for me. I have each mode and each band in memory
plus some SWL
45 matches
Mail list logo
