t;
> >Subject: Re: Burning mad, Firewire problem
> >In-Reply-To: <[EMAIL PROTECTED]>
> >Message-ID: <[EMAIL PROTECTED]>
> >
> >Are you following the directions properly from Apple? Are you wanting to
> >move files from the Pismo to the Qs? The order s
Dear G-Books List and Nick,
My replies to Nick appear within his questions.
At 3:30 PM -0400 5/25/05, G-Books wrote:
Date: Tue, 24 May 2005 21:44:57 -0700 (PDT)
From: Nick Marshall <[EMAIL PROTECTED]>
Subject: Re: Burning mad, Firewire problem
In-Reply-To: <[EMAIL PROTECTED]>
I'm hoping that the combined knowledge of the list can end my
firewire torture.
I should be able to connect my PISMO 400 mhz 768 MB OS 10.3 in
firewire target disk (FTD) mode to a Quicksilver 733 mhz 640 MB OS
10.3 but every time I try to access the FTD for backup purposes it freezes.
Try
Are you following the directions properly from Apple? Are you wanting to
move files from the Pismo to the Qs? The order should be QS on. Shut down
PB. Connect firewire cable. Start the PB while holding down the 'T' key.
The PB should appear as a drive to the QS. Then you could drag any files
I'm hoping that the combined knowledge of the list can end my firewire torture.
I should be able to connect my PISMO 400 mhz 768 MB OS 10.3 in
firewire target disk (FTD) mode to a Quicksilver 733 mhz 640 MB OS
10.3 but every time I try to access the FTD for backup purposes it
freezes. I insta
I have received Panther but not yet installed it. I have a LaCie 400FW
"Studiodrive"
I bought in 2000 or 2001. I don't know whether this is equivalent to a
d2 drive.
So I asked LaCie:
product name: StudioDrive
serial: 754105180297 6774A
purchase date: 2001
interface: Firewire
I am upgrading
when i installed os9 it was from my original disc, ver. 9.0.4. after
spending a lot of time transferring files under osX to the new os9
partition, i then updated the os9 to 9.1(and then 9.2) as soon as i did this
the os 9 partition mounted the firewire drive and everything is fine now.
except that
on 25/09/03 00:25, Steve Moody at [EMAIL PROTECTED] wrote:
> On Wednesday, September 24, 2003, at 11:56 PM, george ruta wrote:
>
>> well, i finally broke down and installed OSX after getting a larger HD.
>> installed that(IBM travelstar 40 GB - definitely quieter), and put old
>> HD
>> into a fi
On Wednesday, September 24, 2003, at 11:56 PM, george ruta wrote:
well, i finally broke down and installed OSX after getting a larger HD.
installed that(IBM travelstar 40 GB - definitely quieter), and put old
HD
into a firewire enclosure. the old HD reads and writes just fine under
OSX,
but is
well, i finally broke down and installed OSX after getting a larger HD.
installed that(IBM travelstar 40 GB - definitely quieter), and put old HD
into a firewire enclosure. the old HD reads and writes just fine under OSX,
but is not seen when i boot up under OS9 in separate partition (the
enclosure
Posted for a colleague (hope you don't mind):
>My G3/500 0S9.2.1 385MB RAM PowerBook has stopped recognising FireWire
>peripherals (Maxtor 40GB and LaCie CDRW). All FireWire extensions are
>enabled. Use of these peripherals is not daily or even weekly but has
>worked in the past.
>Any ideas why
11 matches
Mail list logo
