. The only difficult thing here is to accept edits, even if
you'd have it written differently. Heavy re-editing and deleting
contributions makes people go away quickly, so don't do this but add
your view as well.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http
exporter HowTo there. In case you don't want to do this yourself.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi
. This
exporter is likely used mostly interactive anyways, as you have to
check for errors - with a G-code viewer.
Good suggestions, Felix.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de
Am 25.08.2011 um 17:28 schrieb Markus Hitter:
Am 23.08.2011 um 07:50 schrieb Felix Ruoff:
as you can see, some of the patches failed to get applied. The
reason for this are some changes in git head (the nanometer-
conversion). I have worked to get this fixed yesterday but did not
fully
sehr viel
weiter sein.
Gruss,
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
patchset, I can't promise a point in time. gEDA/PCB
receives quite fundamental changes these days, but I'll work on it.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing
Am 13.08.2011 um 00:45 schrieb Markus Hitter:
For a new patchset, I can't promise a point in time.
I had luck! No surprises, just rebasing commit for commit was
sufficient. New patchset available:
https://bugs.launchpad.net/pcb/+bug/699497/comments/44
Markus
letter.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
pretty well.
Markus
--
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
attachment: G-code Exporter UI.png
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda
/gtk_lists.h. Exit.
(wording translated from german.)
Any clues?
Thanks,
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin
11.04 AMD64, with Intel internal graphics.
I'll fire up the debugger.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi
% of
the RepRap electronics sets (there exist many in parallel).
BTW, what are the show cases for geda/pcb?
http://reprap.org/wiki/Generation_7_Electronics ?
At least worth mentioning :-)
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de
on the gcode exporter, please consider these:
https://bugs.launchpad.net/pcb/+bug/699497
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http
Am 10.05.2011 um 19:39 schrieb DJ Delorie:
If we distribute the GTK dll, we must distribute the GTK sources.
Not if you use the sources unmodified, because they're distributed
elsewhere, then.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump
-limit-the-produced-G-code-to-the-outline.patch
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda
me to leave the patchset where it is if I hadn't
difficulties to convince people to use gEDA. Which leads to the
question: is there a way to compile exporters as a plug-in?
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de
. The patchset is there, do with
it what you think is the best thing to do.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin
for each milling case. Not
exactly ideal, but a more general approach quickly becomes pretty
complex.
Oh, and I hope the patchset still applies, it was last adjusted on
march 7th.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de
:-)
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
out of the box, you can even double-click files.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo
PCBs were invented and
the future of electronics manufacturing is most likely something
three-dimensional, arbitrarily shaped.
my $0.02,
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de
. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
more fun, if you see the
success afterwards.
Cheers,
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman
work these days.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
almost equal a select all. Perhaps I missed something, but that
enforced hiding in groups should probably be optional.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
size.
Am 07.02.2011 um 19:41 schrieb DJ Delorie:
Please don't start the discussion again;
Sorry, DJ, just trying to get PCB out of the habit to change units
every few years.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de
, describing a position in meter or
millimeter? About all mechanical CAD and picture drawing applications
do it that way.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
: 12 12
583 830
There's also the term PageRegion - same values as PaperDimension -,
but I'm not deep enough into the matter to know the difference
between PaperDimension and PageRegion.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump
the foreign area/sub-layout, even if there's enough room after
assembling the zones.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http
Am 19.01.2011 um 22:27 schrieb Stephan Boettcher:
Markus Hitter m...@jump-ing.de writes:
Am 18.01.2011 um 01:56 schrieb John Griessen:
I thought about this some more after sleeping last night, and what
Markus
is probably asking for is a position range sensitive diff or auto-
merge.
When
the advantages ;-)
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
P.S.: Yes, I'm well aware of the Arduino project, and I see only
single people results there. No collaboration.
P.P.S.: The project's success isn't as bad as the above might imply.
The design actually works.
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump
-case, this command should actually do what it
says: make invisible text visible, i.e. leave everything stored in
the schmatic's file untouched. Instead, it sets the visible flag on
all texts, which is nonsense, of course.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus
.
Has somebody similar experiences? Perhaps a solution?
Thanks,
Markus
P.S.: Yes, I had the build process working on the previous version of
Ubuntu, but can't see what's different now.
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de
is, there is no longer a dbus-1 package. Stuff is
either in dbus or libdbus-1-3. I'll try to figure that on my own.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
.
Is this possible?
Thanks,
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
Am 31.12.2010 um 07:10 schrieb DJ Delorie:
here's a patch that lets you zoom out
more than the pcb size! Also lets you pan the board anywhere, not
just to the edge of the window (i.e. you can position the edge of the
board in the middle of the window now).
Great idea!
. You can put comments right into
the provided patches and they're picked up in the issue's tracker
log. Very productive.
my $0.02
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
- there's always the chance somebody can learn from this, as it
solves a particular problem.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
. Undoubtly you
could describe technical problems of any complexity with huge
mathematical formulas, but doing a simulation is almost always much
faster.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de
it in the next few days.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
/index.php?
func=detailaid=3100354group_id=73743atid=538813
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman
. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
Am 15.11.2010 um 18:06 schrieb Stephan Boettcher:
Markus Hitter m...@jump-ing.de writes:
Exactly. A rectangle, or any number of lines drawing another
area. Milled is always a rectangle, though.
Hmm, why? The outline layer is especially useful for boards that are
not rectangular shaped
without getting thick fingers, here's a small
script, also to be typed in a terminal/bash shell:
for F in 00*.patch; do
git am $F
done
Before doing so, you have to download all of them, of course.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de
milling work. Many tools prefer different feedrates
for vertical vs. horizontal movements.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http
any attempt via the DXF route is a lot more work. :-)
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman
an outline mill with an 1.0 mm bit and everything is
appropriate with just one tool change.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
in many source code files, but didn't test yet, what it
actually does.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi
Am 01.11.2010 um 23:12 schrieb John Griessen:
Did you already get circuit prototyping results
with that?
I didn't actually send it to a milling machine yet, but the
simulation in EMC2-sim looks fine.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http
me to such a function without introducing new
dependencies. Else I'd have to restrict this outline milling to
rectangles, as the route used for isolation milling is difficult to
handle either.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de
produces isolation milling and drilling G-code.
http://sourceforge.net/tracker/?
func=detailaid=3100354group_id=73743atid=538813
tries to enhance this exporter.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de
something?
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
Am 01.11.2010 um 19:35 schrieb John Doty:
the GUI designer's necessarily limited horizon.
You become offending.
Please go ahead and implement the CLI interface. It won't go away
when the GUI arrives.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http
xxx yyy, but prefer to
avoid it anyways. You want to catch these.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin
Am 28.10.2010 um 20:48 schrieb Levente Kovacs:
Could you please point me a g-code viewer for Linux? Preferably
debian.
I'm not aware of one, but EMC2 has a simulation mode:
http://reprap.org/wiki/PCB_Milling#EMC2
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
out of the box there, educating people about something is
almost no option.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http
on single sided boards.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
Am Montag, den 25.10.2010, 12:53 +0200 schrieb Markus Hitter:
Am 25.10.2010 um 03:43 schrieb gene glick:
My outline layer was labeled Outline. Changing it to all lower
case fixed it.
I'm about to offer a patch to allow upper case characters as well,
and allow the outline
it to
the solder side group.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
Am Freitag, den 22.10.2010, 23:54 +0200 schrieb Markus Hitter:
https://sourceforge.net/tracker/?func=detailaid=3093302group_id=161080atid=818428
Traumflug's wishlist in the Patches section, in case this long link
doesn't work.
New patches today:
HID-gcode: remove a leftover debug-printf
is, is there a GUI way to create lines outside the board?
Milling the outer border of the board is always done from outside the
board, after all.
Any comments are welcome
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de
questions, remarks or requests for review. Is this
discussed somewhere?
Cheers,
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http
, different feedrates
for approach/isolation mill/drill, feedrate fields in the user
dialog, and some option to mill outlines.
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing
Am Freitag, den 22.10.2010, 23:26 +0200 schrieb Markus Hitter:
I'll try to upload them to Sourceforge.
Done:
https://sourceforge.net/tracker/?func=detailaid=3093302group_id=161080atid=818428
Traumflug's wishlist in the Patches section, in case this long link
doesn't work.
Markus
Hello all,
yesterday I tried to replace a number of 2-pin jumpers (footprint
JUMPER2) with solder jumpers. gschem2pcb does it's duty, removes the old
footprints and provides the new ones. The rats nest is drawn correctly.
However if I try to connect these new footprints with anything, the
Am 17.10.2010 um 15:47 schrieb Stefan Salewski:
On Sun, 2010-10-17 at 14:50 +0200, Markus Hitter wrote:
Hello all,
yesterday I tried to replace a number of 2-pin jumpers (footprint
JUMPER2) with solder jumpers.
Of course, this should work fine, it does for me.
gsch2pcb removes the old
Am 17.10.2010 um 16:17 schrieb gene glick:
ElementLine [ ...
is that a typo?
It's an intentional cut to keep the message short. There are further
ElementLines.
___
geda-user mailing list
geda-user@moria.seul.org
Am 17.10.2010 um 16:25 schrieb gene glick:
If you are willing, send the .pcb file over. I can take a closer
look.
That would be greatly appreciated! Schematics and the board with the
2-pin jumpers are on Github, it's the Gen7Board.xxx:
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
it now.
Heck, adopting the last two lines of the scheme above worked like a
charme. Thanks a lot for the help everybody!
Markus
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/
___
geda-user
Am 17.10.2010 um 17:55 schrieb Stephan Boettcher:
With gEDA, we do not use GUIs, we enter the schematics and the
layout in
emacs ...
... at least parts of it, sometimes.
Ah, emacs people here. This explains a lot. Just for your entertainment:
http://reprap.org/wiki/PCB_Milling#gerbv
gEDA
Am 17.10.2010 um 20:28 schrieb kai-martin knaak:
Markus Hitter wrote:
http://reprap.org/wiki/PCB_Milling#gerbv
gEDA is yet another software suite with schematic and PCB layout
editor. It wasn't included in the set of preferred choices here
because it requires hand-coding of text files
84 matches
Mail list logo