On Mon, 3 Feb 2003, Martyn Welch wrote:
Please could someone comfirm the following for me:
The files in /usr/protage/distfiles are those that are downloaded to install
the packages on the PC. If I was to delete ALL the files in this directory it
wouldn't break anything (apart from
Am Montag, 3. Februar 2003 12:10 schrieb ext Felix Rodriguez:
Hi,
Does any one know how to setup a ATAPI Iomega Zip 100 Drive Under gentoo.
On Redhat
the Iomega Zip Drive appeared as /dev/hdg4. Under gentoo there is no hdg4
in dev. Thanks.
Is you kernel compiled with ide floppy support? Try
At 01:18 PM 2/3/2003 +, Martyn Welch wrote:
snip
Thanks for the reply. I compiled ide-floppy support directly into the
kernel instead of making it a module. I will try to recompile as a module
instead to see what happens.
snip
In which case does dmesg show any mention of the drive
On 03 Feb 2003 17:46:17 +1030
Chris van der Pennen [EMAIL PROTECTED] wrote:
Has anyone tried the gentoo-sources-2.4.20-r1 kernel? Have they had any
issues with it, and is it better than 2.4.19-r10?
Chris
worked with it for a while without any issues, and right now running 2.4.20-r1 with
I'm running win4lin with win98 and kazaa.
Have a seperage harddrive with ext2 formatting mounted for storage with kazaa.
Problem is that if I do a reboot of win4lin, or so much as close kazaa and restart it,
it cannot get access to the files or something. The win98 keeps crashing when it
starts
Hi,
I'm not sure what partition to use with the Grub bootloader. I think
it's 1 less than the corresponding linux partition, and I know the boot
partition is /dev/hdb2.
Does that mean it will be (hd1,1) in grub?
Thanks,
Chris Campbell
--
[EMAIL PROTECTED] mailing list
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 03 February 2003 15:49, chris.danx wrote:
Hi,
I'm not sure what partition to use with the Grub bootloader. I think
it's 1 less than the corresponding linux partition, and I know the boot
partition is /dev/hdb2.
Does that mean it will
Voicu Liviu wrote:
Does that mean it will be (hd1,1) in grub?
YES
Thanks!
--
[EMAIL PROTECTED] mailing list
hi,
i'm searching for a feature of the mandrake-urpmi system:
when i do a urpme gtk on mandrake,
it not only uninstalls gtk, but also removes all the packages that
depend on gtk... so i don't have any broken dependencies on my computer.
as far as i know a simple emerge unmerge gtk removes only
* On Fri, Jan 31, 2003 at 01:05:39 +0100, Jens Mayer wrote:
when trying to compile 'sim' (a kde-icq-client), I get the follwing
errors:
[...]
I solved the problem by compiling kdelibs again. Maybe I broke
something when trying to make the kicker (KDE-panel) translucent.
Regards,
Jens
--
We
Hello all,
Is there anyone having problems with gentoo-sources-2.4.20-r1 and
reiserfs as its root filesystem? I'm asking because I'd experienced 2
problems already:
The symlinks /usr/bin/{mkdir,mknod} got screwed. Even as root I cannot
remove them; rm /usr/bin/{mkdir,mknod} kept getting
On Monday 03 February 2003 3:11 pm, gabor wrote:
hi,
i'm searching for a feature of the mandrake-urpmi system:
when i do a urpme gtk on mandrake,
it not only uninstalls gtk, but also removes all the packages that
depend on gtk... so i don't have any broken dependencies on my computer.
as
Thought I'd try out KDE-3.1. Emerged Qt-3.1 - no error reported during
compile/install.
Every attempt to emerge kde stalls during the configure step of arts.
qt-mt lib declared as not found. A look into configure.log seems to give
this cause: /usr/lib/libXft.so.2: undefined reference to
On Mon, Feb 03, 2003 at 05:26:16PM +0100, Tarsoly Andras wrote:
On Monday 03 February 2003 17.16, Hamilton Coutinho wrote:
Is there anyone having problems with gentoo-sources-2.4.20-r1 and
reiserfs as its root filesystem? I'm asking because I'd experienced 2
problems already:
did u used
Nothing serious. Just one of my little buggy, home-made programs :-)
On 02 Feb 2003 19:34:04 +
Lotas Smartman [EMAIL PROTECTED] wrote:
just wondering, what exactly was it talking up so much memory? just
courious!
On Sun, 2003-02-02 at 18:42, Theofilos Intzoglou wrote:
Never mind found
On Monday 03 February 2003 17.16, Hamilton Coutinho wrote:
hi,
Is there anyone having problems with gentoo-sources-2.4.20-r1 and
reiserfs as its root filesystem? I'm asking because I'd experienced 2
problems already:
did u used the notail option to mount up reseirfs partitions?
because i
I emerged hotplug, seemed to make things work, it shows up as a scsi device
like my cdrw, I have added this to my fstab.
/dev/sda4 /mnt/zipautonoauto,user 0 0
George
On Monday 03 February 2003 08:24 am, Felix Rodriguez wrote:
At 01:18 PM 2/3/2003 +,
How about an option to left the config.log in
/var/tmp/portage//work/ ?
Alcino
On Wed, 2003-01-29 at 19:57, Anders Johansson wrote:
On Wed, 2003-01-29 at 22:40, Matt Neimeyer wrote:
Can anyone recommend how to get that file? Maybe there's a way to just tell
it to run the configure
On Mon, 2003-02-03 at 17:26, Martyn Welch wrote:
On Monday 03 February 2003 3:11 pm, gabor wrote:
hi,
i'm searching for a feature of the mandrake-urpmi system:
when i do a urpme gtk on mandrake,
it not only uninstalls gtk, but also removes all the packages that
depend on gtk... so i
On Monday 03 February 2003 4:42 pm, you wrote:
On Mon, 2003-02-03 at 17:26, Martyn Welch wrote:
On Monday 03 February 2003 3:11 pm, gabor wrote:
hi,
i'm searching for a feature of the mandrake-urpmi system:
when i do a urpme gtk on mandrake,
it not only uninstalls gtk, but also
gabor wrote:
...
for example let's say i install gnome...
then i want to uninstall gnome...
but first time i didn't do an emerge gnome because i didn't want all
those gnome-gadgets, gnome-games, gnome-toys, so i did an emerge
nautilus gnome-desktop gnome-session and that got me all i needed.
emerge -p djbdns states (and emerge djbdns really does it):
These are the packages that I would merge, in order:
Calculating dependencies ...done!
[ebuild N ] net-dns/djbdns-1.05-r3
But find /usr/portage/net-dns/djbdns/ gives:
/usr/portage/net-dns/djbdns/
/usr/portage/net-dns/djbdns/files
On Mon, Feb 03, 2003 at 05:30:56PM +, Martyn Welch wrote:
emerge unmerge gnome-session gnome-desktop nautilus emerge clean
Since you didn't explicitly install the dependences (you didn't did
you?) I believe this should remove them as they are note required for
the functionality of the
On Mon, 2003-02-03 at 20:21, Tyler Trafford wrote:
On Mon, Feb 03, 2003 at 05:30:56PM +, Martyn Welch wrote:
emerge unmerge gnome-session gnome-desktop nautilus emerge clean
Since you didn't explicitly install the dependences (you didn't did
you?) I believe this should remove them
At 12:06 PM 2/3/2003 -0500, George wrote:
I emerged hotplug, seemed to make things work, it shows up as a scsi device
like my cdrw, I have added this to my fstab.
/dev/sda4 /mnt/zipautonoauto,user 0 0
George
By the way which kernel are you using.
--
Brett I. Holcomb wrote:
I saw the icons in the newsletter. Is there a site that I can
download a file with them in it? I did not see a link in the forum
pages I checked.
They are linked from the authors site.
I wrote a bash script to download them. You would have to update the
list if the
Thanks.
On Mon, 03 Feb 2003 15:22:26 -0500
nealbirch [EMAIL PROTECTED] wrote:
Brett I. Holcomb wrote:
I saw the icons in the newsletter. Is there a site that
I can
They are linked from the authors site.
I wrote a bash script to download them. You would have
to update the
list if the
brett holcomb wrote:
Thanks.
On Mon, 03 Feb 2003 15:22:26 -0500 nealbirch [EMAIL PROTECTED]
wrote:
Brett I. Holcomb wrote:
I saw the icons in the newsletter. Is there a site that I can
They are linked from the authors site.
I wrote a bash script to download them. You would have to
Okay. I'll look them up. I was trying to avoid the click
routine, too!
On Mon, 03 Feb 2003 15:32:12 -0500
nealbirch [EMAIL PROTECTED] wrote:
brett holcomb wrote:
Thanks.
Dang just noticed it didn't get them all. There are some
other sites
there as well, but they only have a few icons on
Doing a File - Save Page as... in Mozilla or phoenix will get you a
directory with all the images on the page but without all the clicking
:)
On Mon, Feb 03, 2003 at 03:52:10PM -0500, brett holcomb wrote:
Okay. I'll look them up. I was trying to avoid the click
routine, too!
On Mon, 03
On Tue, 28 Jan 2003 20:19:32 -0800
Robert Cole [EMAIL PROTECTED] wrote:
There plans already to update OO to 1.0.2 in the source tree?
Also are the compile issues taken care of now? Does 1.0.1 compile
properly now? I'm using the -bin right now because at the time there
were allot of issues
On Fri, 31 Jan 2003 12:45:03 -0500
brett holcomb [EMAIL PROTECTED] wrote:
There are avi-xmms bugs but not for this.
http://bugs.gentoo.org/show_bug.cgi?id=13084
--
Martin Schlemmer
Gentoo Linux Developer, Desktop/System Team Developer
Cape Town, South Africa
--
[EMAIL PROTECTED] mailing
Hello,
recently a sytem I had intended to run unattended forever has emerged
postfix 2.0.3 over a perfectly working 1.11 installation and since than.
The log says that the connection to postfix/private/proxymap is refused.
What's the easiest way to return to a working version?
Thanks,
Henk.
Problem #1:
I just did a fresh install of KDE 3.1 to my newly reconfigured midtower(switched to
Raid 0). Before I switched I had a problem when I read certain posts on the Gentoo
User list that had PGP signatures in them, A little dialog box would pop-up and say I
don't have PGP installed so I
Hi All,
I'm trying to emerge eroaster and emerge -p eroaster tells me that all
dependancies are satisfied. and only the eroaster will be installed. So, I do
emerge eroaster and it leaves me with:
Unpacking source...
Unpacking eroaster-2.1.0.tar.gz
Source unpacked.
creating cache
I'm running 1.4 unstable (~X86).
Yesterday i emerged XFree 4.2.99.4.
Now GDM, and Mozilla won't run.
I unemerged and re emerged both with no success.
I also recently emerged KDE 3.1 and unemerged KDE 3.0.5a.
Now all the fonts in KDE are messed up, they don't seem to be
anti-aliased, but
Hi everyone,
I have a ATi radeon 7500 video card (with dvi output) and a LCD monitor
with dvi input. I don't know whether there is support in linux for
dvi-dvi; I'm using the monitor analogic input, meaning that the signal
from the video card (digital by nature) is converted into analogic,
On Mon, 3 Feb 2003, Henk Abma wrote:
Hello,
recently a sytem I had intended to run unattended forever has emerged
postfix 2.0.3 over a perfectly working 1.11 installation and since than.
The log says that the connection to postfix/private/proxymap is refused.
What's the easiest way
On Mon, 3 Feb 2003 22:45:16 + (WET)
Jorge Almeida [EMAIL PROTECTED] wrote:
Hi everyone,
I have a ATi radeon 7500 video card (with dvi output) and a LCD monitor
with dvi input. I don't know whether there is support in linux for
dvi-dvi; I'm using the monitor analogic input, meaning
On Monday 03 Feb 2003 22:16, Mark Saunders wrote:
I'm running 1.4 unstable (~X86).
Yesterday i emerged XFree 4.2.99.4.
Now GDM, and Mozilla won't run.
I unemerged and re emerged both with no success.
I also recently emerged KDE 3.1 and unemerged KDE 3.0.5a.
Now all the fonts in KDE are
I'm trying to install Apache 2 and PHP together, and I'm having
trouble making Apache actually process my PHP documents with PHP -- it
simply returns them as-is with an application/x-httpd-php MIME type.
I've looked around and I haven't found anything directly helpful. I
guess that somehow PHP
On Mon, 3 Feb 2003 23:29:44 + Martyn typed:
Hi all,
I have managed to get the blackdown Jre Java plugin to work by placing
the following symlink:
cd /usr/lib/nsbrowser/plugins
ln -s /opt/blackdown-jre-1.3.1/plugin/i386/mozilla/javaplugin_oji.so
Thanks for the tip, nice one!
On mine
On Tuesday February 4 2003 10:45 am, Peter Ruskin wrote:
On Monday 03 Feb 2003 22:16, Mark Saunders wrote:
I'm running 1.4 unstable (~X86).
Yesterday i emerged XFree 4.2.99.4.
Now GDM, and Mozilla won't run.
I unemerged and re emerged both with no success.
I also recently emerged
In the absence of bold, is it possible to have evolution highlight
unread mail in a different colour?
Mark
--
[EMAIL PROTECTED] mailing list
On Tue, 4 Feb 2003, Johan Hedqvist wrote:
On Mon, 3 Feb 2003 22:45:16 + (WET)
Jorge Almeida [EMAIL PROTECTED] wrote:
Hi everyone,
I have a ATi radeon 7500 video card (with dvi output) and a LCD monitor
with dvi input. I don't know whether there is support in linux for
Is there a stage3 for x86 somewhere?? I need to make this work with my Via
Eden ESP board. Is is there a specific version that'll work well with ESP
processors?
I really don't mind using the generic x86--if it were available somewhere?!@#$
All I could find is stage1 for x86
--
Matthew
Hi all,
I'm not very familiar with bugzilla and I'm not sure if this is really
a bug, so I post it here:
Sometimes (so NOT everytime) I get errors when unmerging a package.
Her is a sample output:
===listing===
itchy root # emerge unmerge kdelibs-3.0.4-r1
...snip...
--- !empty dir
Ok, that fixed it. This really drove me up the wall. Thanks for the nice howto Paul.
Kent
On Sat, 1 Feb 2003 21:37:17 +0100
Paul de Vrieze [EMAIL PROTECTED] wrote:
On Thursday 30 January 2003 07:57, Kent Jantz wrote:
First off let me say I already looked thru the forums and mail list
Problem #1 has been fixed..
Kent
On Mon, 3 Feb 2003 15:06:44 -0700
Kent Jantz [EMAIL PROTECTED] wrote:
Problem #1:
I just did a fresh install of KDE 3.1 to my newly reconfigured midtower(switched to
Raid 0). Before I switched I had a problem when I read certain posts on the Gentoo
User
I'm getting this error when I launch a program like tuxracer (commercial
version) or Sid Meier's Alpha Centauri (but not tribes2, strangely enough).
This message comes from the monitor itself, btw.
I'm using the same options in my Xfree file as before (using nvidia's driver
for my 32 MB
On Monday 03 February 2003 23:16, Mark Saunders wrote:
I'm running 1.4 unstable (~X86).
Yesterday i emerged XFree 4.2.99.4.
Now GDM, and Mozilla won't run.
I unemerged and re emerged both with no success.
I also recently emerged KDE 3.1 and unemerged KDE 3.0.5a.
Now all the fonts in KDE
Hello,
Here is the output of 'grep WW /var/log/XFree86.0.log'.
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(WW) (1600x1200,Monitor0) mode clock 162MHz exceeds DDC maximum 140MHz
Now, I have
Hi all,
I'm searching for a tool which I can use to analyze the ip traffic
going over my iptables-based gateway/firewall.
I only know NTA (http://nta.kyberdigi.cz/), but I need to know the
traffic from each machine (or IP address) from inside my private LAN.
Does an ebuild exist or does
Hi All,
Does anyone have experience with k3b? Xcdroast see's my CD-ROM and CD-RW
without problem. But, kcb sees the reader but not the writer. grub.conf has
the line passing ide-scsi to both drives but a cdrecord -scanbus sees
neither. I can give more info tomorrow but tonight that box
Ernie Schroder wrote:
Does anyone have experience with k3b?
Well, unfortunately, my k3b has ceased functioning since I upgraded to
KDE 3.1. I used to have fully operational CD burning capabilities, but
those have vanished, and my error description now sounds exactly like
yours. I'd be
On Tuesday 04 February 2003 03:35, Anders Johansson wrote:
Look at ntopd. It gives you a very nice overview of your traffic.
http://www.ntop.org/ntop.html
Yeah, thx a lot! That is EXACTLY what I was looking for :)
Greets, Matthias
--
Mmm ... business deal
- Homer Simpson
--
[EMAIL
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On February 3, 2003 09:44 pm, Ernie Schroder wrote:
Hi All,
Does anyone have experience with k3b? Xcdroast see's my CD-ROM and CD-RW
without problem. But, kcb sees the reader but not the writer. grub.conf has
the line passing ide-scsi to
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Alan wrote:
|
| Maybe an idea for another feature for portage would be to check for the
| SLOT variable and use a different letter instead of D. Maybe Parallel
| install, or Additional package?
| (ccing to gentoo-dev)
|
This seemed like it would be
While trying to emerge K3B, mplayer was drawn in and failed...
/var/tmp/portage/mplayer-0.90_rc2/temp/ccJNmuBQ.o(.text+0x4e3):/var/tmp/portage/mplayer-0.90_rc2/work/MPlayer-0.90rc2/Gui/mplayer/../../libmpdemux/stream.h:174:
undefined reference to `cache_stream_fill_buffer'
collect2: ld
I know this question has been asked a million times, but can Java
applets run under Mozilla in Gentoo? I have see in my plugins
directory for mozilla that there is a valid link to a plugin for java,
but mozilla doesn't list it under about:plugins and Java doesn't seem
to work.
I just
Alan wrote:
Merry Monday everyone.
I've had a couple of odd system crashes (hard lock up, frozen video,
not pingable, requiring hard reboot) that I was hoping could be
explained.
The other times seem to be GL related. I've come back to my box and
had it sitting at a GL screensaver under kde
Lee Fickenscher wrote:
On Mon, Feb 03, 2003 at 03:52:10PM -0500, brett holcomb wrote:
Dang just noticed it didn't get them all. There are some
other sites
there as well, but they only have a few icons on them. I
wrote the
script because I didn't feel like doing right click left
click enter
I'm running a k7-900, 450megs of ram, geforce3, and lots of hard
drive (3x80 in raid5, 2x cdroms, another two drives for a raid0 on /
and my winxp partition). The system has a 350watt power supply and
hasn't had oddness like this before. I'm running the gentoo sources
kernel with
On Tue, 4 Feb 2003 00:37:48 + (WET)
Jorge Almeida [EMAIL PROTECTED] wrote:
On Tue, 4 Feb 2003, Johan Hedqvist wrote:
On Mon, 3 Feb 2003 22:45:16 + (WET)
Jorge Almeida [EMAIL PROTECTED] wrote:
Hi everyone,
I have a ATi radeon 7500 video card (with dvi output) and a LCD
Hey all, i'm having a problem with DVD::RIP.
Its complaining about not being able to find Gtk/Gdk/Pixbuf.pm. What do i need
to download and built for this to exits?
thanks in advance,
bryce
--
[EMAIL PROTECTED] mailing list
Suppose you need GTK+ 2.2
Nugzar Nebieridze
---
Tuesday, February 4, 2003, 11:22:43 AM, you wrote:
BV Hey all, i'm having a problem with DVD::RIP.
BV Its complaining about not being able to find Gtk/Gdk/Pixbuf.pm. What do i need
BV to download and built for this to
66 matches
Mail list logo
