Is it possible to copy the kmail mail folders/messages so that they can be
read by opera's mail client?
Thanks for any replies
Paul
--
Using Opera's revolutionary e-mail client: http://www.opera.com/mail/
Hello all,
I have the above tablet and have been trying to get it working with Gentoo.
The problem seems to be that the kernel driver is USB and all instructions I
can find seem to concentrate on the USB versions of Wacom products. I am
using:
Portage 2.1.6.4
On Monday 29 September 2008, Daniel Pielmeier wrote:
Don't rely on this script to much. Because it works for me must not
mean it does for you. I have tested some cases and I worked every time
until now. So verify the output of a manual emerge -pv --depclean
atom on the unneeded entry first to
Hi all,
For the best part of the week I have not received any mail from the amd64
list.
Is there a problem?
Paul
--
This message has been sent using kmail with gentoo linux
--
gentoo-user@lists.gentoo.org mailing list
On Friday 28 December 2007, Roman Zilka wrote:
symlink
/mnt/external/OneFileSystemBackup/usr/i686-pc-linux-gnu/lib/libopcod
es.so - /usr/lib32/binutils/i686-pc-linux-gnu/2.18/libopcodes.so
failed: Operation not permitted (1)
This is most likely caused by the FAT filesystem on the target
Neil has handled this... I wanted to include the rsync syntax to
collect only directories... full or empty:
So to collect all the directories regardless of your excludes
put this before any excludes:
--include=/**/
The trailing slash confines it to direcotories only.
Thanks for the
On Tuesday 25 December 2007, Neil Bothwick wrote:
--one-file-system
Hi Neil,
Still not sure what the above will produce, I didn't find the man page
very readable. Take sys for example, if it is saying that the directory
would be created, would I still need to exclude everything under it?.
I
Hi all,
Complements of the season.
I use a script to perform backup to a connected usb harddisk and I have
noticed that it appears to be writing all files each time instead of
updating only the changes. I am wondering if rsync has changed. I have
read the man pages but am not quite sure if I
On Tuesday 25 December 2007, Neil Bothwick wrote:
On Tue, 25 Dec 2007 15:43:32 +, Paul Stear wrote:
I use a script to perform backup to a connected usb harddisk and I
have noticed that it appears to be writing all files each time
instead of updating only the changes. I am wondering
On Tuesday 22 May 2007 11:00, [EMAIL PROTECTED] wrote:
On 5/22/07, Nistor Andrei [EMAIL PROTECTED] wrote:
I'm not sure if this is the right place to ask, but i'm experiencing some
weird behaviour in Amarok. The problem is that with some songs the length
is not displayed. I'm unable to
Sorry for posting this again but can anybody help?
How do I find out what 451 Temporary Local Problem is?
Paul
Hello all,
Sometime ago I stopped receiving elog mail messages.
The error in the log is:-
sendmail: RCPT TO:my email address (451 Temporary local problem - please
try later)
!!!
On Wednesday 11 October 2006 19:12, Neil Bothwick wrote:
On Wed, 11 Oct 2006 08:24:48 -0700, Grant wrote:
I tried using vobcopy to decrypt my The Life of Mammals dd images
and, strangely, it's not working. vobcopy outputs the same error that
dvdbackup did, something about an error cracking
Hi all,
My amd64 based setup seems to be working fine but I have just noticed an error
during the boot process.
sd 3:0:0:0: Attached scsi disk sdb
sd 3:0:0:0: Attached scsi generic sg1 type 0
Unable to handle kernel paging request at c203cf5d RIP:
Hi,
Sorry to bother you but I am missing the use of musicbrainz in amarok 1.4.0
using kde 3.5.2 on an amd64 platform.
When will we get it back?
If it's a question of testing I would like to volunteer my services (as a
user).
kind regards
Paul
--
This message has been sent using kmail with
Hi all,
I have a new install of xine on an amd64 system.
I have a new dvd (Silent Hill) that starts and then errors with the
following:-
The source seems encrypted, and can't be read. Your DVD is probably crypted.
According to your country laws, you can or can't install/use libdvdcss to be
I've been running x86 sources on an AMD 4200+ for several months and it
is very stable.
Tony
Hi,
I am wondering if I should run x86 an an athlon 64. I am upgrading my win box
to athlon x2 4600 and I'll use the old athlon 64 for gentoo.
Does using x86 make the 64 athlon act as 2 processors
On Wednesday 06 September 2006 14:39, Friedrich Göpel wrote:
On 9/6/06, Paul Stear [EMAIL PROTECTED] wrote:
Hi,
I am wondering if I should run x86 an an athlon 64. I am upgrading my
win box to athlon x2 4600 and I'll use the old athlon 64 for gentoo.
Does using x86 make the 64 athlon act
Hi All,
I have a strange problem with amarok rebuilding the database everytime I start
it, so all of my scores etc have been lost.
I am using amarok 1.4.1 and mysql 4.1.20, I'm sure it's just a setting
somewhere but I can't think where. Any help?
Paul
--
This message has been sent using kmail
Hi all,
I have been having this problem for a few days now I am ~x86, Portage
2.1.1_pre4-r4 (default-linux/x86/2006.0, gcc-4.1.1/vanilla, glibc-2.4-r3,
2.6.17-gentoo-r1 i686).
Any ideas?
Paul
i386/snowdsp_mmx.c: In function 'ff_snow_vertical_compose97i_sse2':
i386/snowdsp_mmx.c:461: error: PIC
On Tuesday 25 July 2006 09:07, Richard Fish wrote:
On 7/24/06, Paul Stear [EMAIL PROTECTED] wrote:
Yes it is just very slow, the mesage stalled keeps coming up and then
starts again.
Double check what the connection speed is for XP. You can do the same
using ethtool under Linux. You
I am copying files from my gentoo box to an xp box and it is so slow. I have
both boxes connected with cable via a router, which connects to my broadband
isp.
When downloading from the internet to either box I get fast speeds in the
100's of MBs. However transferring box to box I only get
On Monday 24 July 2006 18:09, Daniel da Veiga wrote:
On 7/24/06, Paul Stear [EMAIL PROTECTED] wrote:
I am copying files from my gentoo box to an xp box and it is so slow. I
have both boxes connected with cable via a router, which connects to my
broadband isp.
When downloading from
On Monday 24 July 2006 19:46, Daniel Huckstep wrote:
Are you sure it's actually slow or are you just looking at the number
thinking it's slow...
If you are getting fast speeds in the 100's of MBs from the internet
then I want your internet connection. it's probably more like 100's of
KB...
Hi all,
I have never got system messages, cron messages etc to work in gentoo. This
really hasn't been a problem but the more progs I have running the more I
think I should attempt to get this working. Especially elogs.
I have ssmtp installed but not set up correctly, I have looked at the man
Thanks Richard I did option 2 and all is working well.
2. Change the GROUP:= setting to be lp. This will let cups access
the device again. You will then need to add your user account to the
lp group in order to scan.
Thanks again
Paul
--
This message has been sent using kmail with gentoo
Hi all,
Last week I needed to use the scanner part of my MFP and managed to get thing
working by using Neil's suggestion that I enter a USB rule
in /etc/udev/rules.d/10-udev.rules, so I entered the following:-
SYSFS{product}==USB MFP, SYSFS{manufacturer}==EPSON, GROUP:=scanner,
MODE:=0660
This
On Saturday 08 July 2006 20:05, Neil Bothwick wrote:
But where do I put this?
Hi,
Neil advised that in /etc/udev/rules.d/10-udev.rules I enter the following:-
SYSFS{product}==USB MFP, SYSFS{manufacturer}==EPSON, GROUP:=scanner,
MODE:=0660
This worked well and I was able to scan.
However, I
Hi all,
I have just tried to use my scanner for the first time in months and it is not
recognized. However, if I run xscanimage as root it all works well.
I have read the man pages and my setup seems to be correct scanimage -L find
the scanner as root but not as a user.
My conclusion is that I
On Saturday 08 July 2006 14:45, Gian Domeni Calgeer wrote:
Hi
Normally, you have to be in the scanner group. You should try gpasswd -a
user scanner and then logout and login.
Gian
Am Samstag, 8. Juli 2006 13:16 schrieb Paul Stear:
Hi all,
I have just tried to use my scanner
On Saturday 08 July 2006 16:45, Neil Bothwick wrote:
SYSFS{product}==CanoScan, SYSFS{manufacturer}==Canon, GROUP:=scanner,
MODE:=0660
Neil,
Thanks that's just what I'm looking for.
SYSFS{product}==0x0808, SYSFS{manufacturer}==0x04b8, GROUP:=scanner,
MODE:=0660
But where do I put this?
--
This
Hi all,
emerging samba results in the following error:-
!!! ERROR: net-fs/samba-3.0.22-r2 failed.
Call stack:
ebuild.sh, line 1545: Called dyn_compile
ebuild.sh, line 940: Called src_compile
samba-3.0.22-r2.ebuild, line 104: Called
econf '--with-fhs' '--sysconfdir=/etc/samba'
On Wednesday 05 July 2006 13:09, you wrote:
Hi all,
emerging samba results in the following error:-
!!! ERROR: net-fs/samba-3.0.22-r2 failed.
Call stack:
ebuild.sh, line 1545: Called dyn_compile
ebuild.sh, line 940: Called src_compile
samba-3.0.22-r2.ebuild, line 104: Called
Hi,
I am running an ~x86 system and yesterday I did an emerge world, all went well
until the next time I booted. kdm ran but the screen just had a flashing
loggin box. I could not even get another terminal using alt F1-F7. So I am
faced with not being able to loggin at all. This raises a few
On Wednesday 21 June 2006 11:05, Neil Bothwick wrote:
On Wed, 21 Jun 2006 10:47:11 +0100, Paul Stear wrote:
1. What is the correct procedure to recover a system in this state?
What tools do I need?
In this case, all you need to do is boot without X, or SSH in from
another box. As a last
Hi all,
I have just tried to use eix but all I'm getting is Found 0 matches.
I have updated eix
update-eix
Reading Portage settings ..
Building database (/var/cache/eix) from scratch ..
[0] /usr/portage/ (cache: cdb)
Reading 100%
[1] /usr/local/portage/ (cache: none)
Reading 100%
Sorry if this is duplicate but I don't think the original arrived.
Hi all,
I moved my /var to a new disk and now amarok will nor work because it can't
connect to mysql
Can't connect to local MySQL server through
socket '/var/run/mysqld/mysqld.sock' (2)
If I /etc/init.d/mysql stop
* Caching
On Monday 12 June 2006 12:09, Alexander Kirillov wrote:
snip
So it looks as if I have really screwed up moving /var
The /var/run/mysql directory is empty
Check the permissions on /var/run/mysql.
It should be owned by mysql.
What's in mysql logs? They're probably in /var/log/mysql
Sasha
Hi all,
I moved my /var to a new disk and now amarok will nor work because it can't
connect to mysql
Can't connect to local MySQL server through
socket '/var/run/mysqld/mysqld.sock' (2)
If I /etc/init.d/mysql stop
* Caching service dependencies ... [ ok ]
*
Hi all,
I am logged into kde 3.5.3 as a user and when I run the superuser konsole I am
asked for root's password, this I enter as normal but I get the following
error message:-
configuration error - unknown item 'GETPASS_ASTERISKS' (notify administrator)
It still works for emerges etc.
Is this
On Tuesday 06 June 2006 16:10, Uwe Thiem wrote:
On 06 June 2006 15:43, Paul Stear wrote:
Hi all,
After upgrading to kde 3.5 amarok will not start, also I have had juk
fail with the same lib error.
Any ideas on how to resolve this?
I am using :- Portage 2.1_rc4-r3 (default-linux/x86
On Tuesday 06 June 2006 16:10, Uwe Thiem wrote:
On 06 June 2006 15:43, Paul Stear wrote:
Hi all,
After upgrading to kde 3.5 amarok will not start, also I have had juk
fail with the same lib error.
Any ideas on how to resolve this?
I am using :- Portage 2.1_rc4-r3 (default-linux/x86
Hi all,
For some time now I have been getting errors on boot.
1. This happens a number of times:-
udev-event [1777]:find_free_number: %e is deprecated, will be removed and is
unlikely to work correctly. Don't use it
What does this mean and how do I fix it?
1. etc/modules.devfs not
Hi,
I am in the process of updating my system to ~x86 and have reached 28 out of
388 packages. The emerge stopped with the following error
Error: Failed to import module 'portage_db_cdb.database'
File /usr/lib/portage/pym/portage.py, line 1290, in load_best_module
mod = load_mod(best_mod)
Mhh, are you using cdb with portage ? if yes, try mv
/etc/portage/modules /etc/portage/__modules.
AFAIK, cdb doesn't work with portage-2.1*
regards,
Boris.
Thanks for the reply, I had just worked it out and now am emerging normally.
Thanks
Paul
--
This message has been sent using kmail
On Thursday 16 Mar 2006 18:58, Rick van Hattem wrote:
dd if=/dev/zero
of=/dev/sda bs=1k count=100
Thanks for the help
That worked It is now only showing sda1
Paul
--
This message has been sent using kmail with gentoo linux
--
gentoo-user@gentoo.org mailing list
Hi all,
I am so dumb. I partitioned a new disk for 1 large partition, I then needed
to make a file system and by mistake I entered
mke2fs -j /dev/sda and ignored the warning. I soon discovered that I didn't
have any partition so I created it again with fdisk and the made the file
system
On Thursday 16 Mar 2006 12:01, Hans-Werner Hilse wrote:
Hi,
On Thu, 16 Mar 2006 10:50:10 + Paul Stear [EMAIL PROTECTED]
wrote:
My problem now is that when I plug the disk in (it's am external USB
disk) I get 2 icons on my kde desktop both saying 200G Media one
is /dev/sda
snip all
Hi,
The mystery gets deeper, every time I mounted the network storage server disk
and rsync'd I had a lot of errors. It appears that the mount point was
changing permissions every time I mounted.
I want all of the directories and files to retain the original privileges
during the
The root of all my rsync/network problems is a permissions problem
The /mnt/network is
drwxrwxrwx 3 root root 4096 Mar 13 13:24 test
After I mount using
mount -t smbfs -o
username=paul,password=pass //LKG7DDD5F/gentoobackup /mnt/network
the /mnt/network permissions have change to
drwxr-xr-x
Hi all,
I am trying to rsync to a remote server with the command:
rsync -Cav --delete --progress /test lkd5f:/test
but I get the following error messages:
ssh: connect to host lkd5f port 22: Connection refused
rsync: connection unexpectedly closed (0 bytes received so far) [sender]
rsync error:
thought ssh was used
by default.
How do I check if the remote machine allows ssh?
Paul Stear wrote:
Hi all,
I am trying to rsync to a remote server with the command:
rsync -Cav --delete --progress /test lkd5f:/test
but I get the following error messages:
ssh: connect to host lkd5f port 22
on the device I get 3 icons NFS SMB HTTP
If I click on SMB the location changes to smb://device.homenet.com and I can
copy any files I want - even links seem to work
I'm sure there must be a simple answer to this
Paul
Paul Stear wrote:
Hi all,
I am trying to rsync to a remote server
snip
The external USB discs have a USB connector that plugs into the Linksys
network storage box, that in turn is connected to my network switch as are
my linux and my windows boxes.
snip
I have connected one of the discs directly to the usb port.
fdisk -l /dev/sda
Disk /dev/sda: 200.0 GB,
On Friday 10 Mar 2006 14:42, Harry Putnam wrote:
snip
I don't really understand the relationship between what you call a
server and the actual disks. How is it different from just having the
disks on an USB port?
The external USB discs have a USB connector that plugs into the Linksys
network
On Thursday 09 Mar 2006 15:36, Harry Putnam wrote:
Paul [EMAIL PROTECTED] writes:
All files copy with no errors but symlinks always fail with the message:
symlink /mnt/network/usr/lib/libgstinterfaces-0.8.so.0 -
libgstinterfaces-0.8.so.0.1.0 failed: Operation not supported
I am
On Thursday 09 Mar 2006 18:19, Harry Putnam wrote:
Remy Blank [EMAIL PROTECTED] writes:
Paul Stear wrote:
I am mounting the network usb drive using cifs
I'm not quite sure, but I think cifs doesn't support symlinks.
It can be done if the winbox has SFU (Services for Unix) installed
56 matches
Mail list logo