the problem.
As for your issue Joseph, have you tried using a tool like unetbootin?
It would certainly simplify the process for you. I am a CLI purist at
heart, but there comes a point where I would rather just get something
done than stick to my ideals.
--
Will Tomlinson
about any
Linux live CD will work as long as the architecture matches (chroot
from x86 to amd64, for example, will not work). Anyway, if this is not
what you are trying to do, maybe you can give us more details.
--
Will Tomlinson
Correct me if I'm wrong, but it is possible from what I've read to cross
compile using distcc.
http://www.gentoo.org/doc/en/cross-compiling-distcc.xml seems to describe
this in detail, though the article is nearly 7 years old. I would prefer
this over a one shot package install since you could
Why not use libreoffice-bin? Or if you really want to compile from source,
look at distcc, as long as the processor is in the same family it should be
a straightforward configuration.
On May 11, 2013 1:54 PM, Silvio Siefke siefke_lis...@web.de wrote:
Hello,
is there a way that i can compile
I've had this problem before as well and can confirm that adding NTP to the
default run level solved it.
On Jan 17, 2013 10:08 AM, Stroller strol...@stellar.eclipse.co.uk wrote:
On 16 January 2013, at 16:43, Grant Edwards wrote:
I'm having problems with one of my Gentoo systems who's
Al wrote:
Drew Tomlinson wrote:
I'm not sure where to start. I upgraded from xorg 1.4 to xorg 1.6. I
also followed the ATI Migration guide at
http://www.gentoo.org/proj/en/desktop/x/x11/ati-migration-guide.xml.
Everything seems fine except now Virtualbox 3.0.2 guest displays
I'm not sure where to start. I upgraded from xorg 1.4 to xorg 1.6. I
also followed the ATI Migration guide at
http://www.gentoo.org/proj/en/desktop/x/x11/ati-migration-guide.xml.
Everything seems fine except now Virtualbox 3.0.2 guest displays are
unreadable. Before the upgrade, Virtualbox
walt wrote:
On 08/03/2009 11:53 PM, Drew Tomlinson wrote:
I'm not sure where to start. I upgraded from xorg 1.4 to xorg 1.6. I
also followed the ATI Migration guide at
http://www.gentoo.org/proj/en/desktop/x/x11/ati-migration-guide.xml.
Everything seems fine except now Virtualbox 3.0.2
Is there some way to get 32 bit versions of libgnomebreakpad.so and
libcanberra-gtk-module.so installed on my amd64 gentoo box? I'm
attempting to run an Adobe Air application that requires these
libraries. I can't seem to turn up anything on Google and am a total
newb when it comes to
Drew Tomlinson wrote:
Has anyone had luck installing Adobe Air and TweetDeck on Gentoo? I
followed
http://www.flashinthepan.ca/computer-tips/linux-computer-tips/adobe-air-on-gentoo-linux
to get the SDK installed and attempted to run TweetDeck 0.25. It starts
but I get a lot of errors. Has
Alan McKinnon wrote:
Thanks for your reply.
On Thursday 16 April 2009 03:00:59 Drew Tomlinson wrote:
Has anyone had luck installing Adobe Air and TweetDeck on Gentoo? I
followed
http://www.flashinthepan.ca/computer-tips/linux-computer-tips/adobe-air-on-
gentoo-linux to get the SDK
Has anyone had luck installing Adobe Air and TweetDeck on Gentoo? I
followed
http://www.flashinthepan.ca/computer-tips/linux-computer-tips/adobe-air-on-gentoo-linux
to get the SDK installed and attempted to run TweetDeck 0.25. It starts
but I get a lot of errors. Has anyone had luck getting
I'm trying to connect to a Cisco 3650 VPN Concentrator at work. On
Windows clients, I use the included dialup networking client and connect
without issue using pptp. This is not a L2TP/IPSEC VPN. I want to do
the same on a Gentoo client.
I've Googled and found that pptpclient should do what I
Drew Tomlinson wrote:
I'm trying to connect to a Cisco 3650 VPN Concentrator at work. On
Windows clients, I use the included dialup networking client and connect
without issue using pptp. This is not a L2TP/IPSEC VPN. I want to do
the same on a Gentoo client.
I've Googled and found
I'm looking for an vncviewer for Linux that has the same features as the
Tight VNC viewer on Windows. I really like how the Windows viewer will
scale the desktop and remember connections. Also, it's very easy to
choose between low and high bandwidth connections with the Windows
version.
I've
David Negreira wrote:
Drew Tomlinson wrote:
I'm looking for an vncviewer for Linux that has the same features as the
Tight VNC viewer on Windows. I really like how the Windows viewer will
scale the desktop and remember connections. Also, it's very easy to
choose between low and high
Aaron Clark wrote:
Drew Tomlinson wrote:
I'm looking for an vncviewer for Linux that has the same features as the
Tight VNC viewer on Windows. I really like how the Windows viewer will
scale the desktop and remember connections. Also, it's very easy to
choose between low and high bandwidth
Neil Bothwick wrote:
On Wed, 4 Feb 2009 13:38:11 +, Stroller wrote:
So when I found the clock to be a week out of date I checked that ntpd
appeared to be running (it was) and restarted it. The date remained
the same. Stopping ntpd starting ntp-client corrected the date
John covici wrote:
on Thursday 11/27/2008 Dale([EMAIL PROTECTED]) wrote
Drew Tomlinson wrote:
Modules are not autoloading since initial install with gentoo-sources
2.6.25. I have since upgraded to kernel 2.6.27 but the issue
persists. In my previous Gentoo install and other Gentoo
Modules are not autoloading since initial install with gentoo-sources
2.6.25. I have since upgraded to kernel 2.6.27 but the issue persists.
In my previous Gentoo install and other Gentoo installs, autoloading
modules worked. I do not know why they are not loading in this case.
I have the
Alan E. Davis wrote:
Norberto and Josh:
Thank you for the suggestion. It's on the back burner. I have the
space to experiment with it now. I have balked for the time being on
basis of, partly, my need to be able to swap drives in and out, and
have it clear in mind which partitions belong
I have a laptop that has been working fine until my last world update
yesterday. FWIW, it's probably been at least 3 months since the last
update. I'm running the 2.6.25-r4 kernel from gentoo sources. Gnome
version is 2.22. Xorg version is 7.3. Mouse is actually a Synaptics
Touchpad on
Eric Martin wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Harry Putnam wrote:
Josh Cepek [EMAIL PROTECTED] writes:
Harry Putnam wrote:
David Blamire-Brown [EMAIL PROTECTED] writes:
I did this a while back and I got it working by tunnelling via SSH
(using
Miernik wrote:
list-catcher [EMAIL PROTECTED] wrote:
The most important of the problems involves the fan. The laptop gets a
whole lot hotter using linux while compiling than it did using vista
while compiling which implies that there is some fan control missing
from my install. What sort of
On 6/6/2008 2:40 AM Mick said the following:
On Tuesday 03 June 2008, Drew Tomlinson wrote:
Ever since I upgraded my gentoo-sources kernel from 2.6.23 to 2.6.25, I
can no longer see packets on my wireless network for any device other
than my own. The tcpdump output looks like this:
20:49
On 6/5/2008 4:49 PM Eric Martin said the following:
Drew Tomlinson wrote:
Ever since I upgraded my gentoo-sources kernel from 2.6.23 to 2.6.25,
I can no longer see packets on my wireless network for any device
other than my own. The tcpdump output looks like this:
20:49:32.909144 00:12:bf
Ever since I upgraded my gentoo-sources kernel from 2.6.23 to 2.6.25, I
can no longer see packets on my wireless network for any device other
than my own. The tcpdump output looks like this:
20:49:32.909144 00:12:bf:2a:2c:76 (oui Unknown) Unknown SSAP 0x10
00:1f:32:5f:fe:06 (oui Unknown)
ionut cucu wrote:
On Mon, 14 Apr 2008 04:23:05 +0400
Andrew Gaydenko [EMAIL PROTECTED] wrote:
=== On Monday 14 April 2008, Drew Tomlinson wrote: ===
For the past few days, anytime I've attempted to get to gentoo-wiki
or gentoo-portage, my browser just sits. I connect to other
For the past few days, anytime I've attempted to get to gentoo-wiki or
gentoo-portage, my browser just sits. I connect to other sites just
fine. It may be my firewall/IDS but I'm not sure. Are these sites
still available?
Thanks,
Drew
--
Be a Great Magician!
Visit The Alchemist's
Andrew Gaydenko wrote:
=== On Monday 14 April 2008, Drew Tomlinson wrote: ===
For the past few days, anytime I've attempted to get to gentoo-wiki
or gentoo-portage, my browser just sits. I connect to other sites
just fine. It may be my firewall/IDS but I'm not sure
Alan McKinnon wrote:
On Saturday 01 March 2008, Mike Mazur wrote:
Hi,
On Sat, Mar 1, 2008 at 2:26 AM, Steve [EMAIL PROTECTED] wrote:
Situation: There's a LAN with a Netgear ADSL router... heterogenous
OS, including Gentoo, are installed on various PCs on the LAN.
I'd like to know
Philip Webb wrote:
080221 Drew Tomlinson wrote:
I emerged OpenOffice 2.3.1 on my amd64 install running gentoo-2.6.23-r5.
I can start OpenOffice as root but not as a regular user.
How are you starting it ? Do you enter eg 'oocalc' from a CLI
or do you click on an icon in a start menu
Willie Wong wrote:
On Fri, Feb 22, 2008 at 09:52:39AM -0800, Penguin Lover Drew Tomlinson squawked:
There are no error messages. When starting as a user, the splash
graphic just sits there and the CPU usage is basically 100% for both X
and oosplash.bin. When starting as root, the splash
I emerged OpenOffice 2.3.1 on my amd64 install running gentoo-2.6.23-r5
kernel. I can start OpenOffice as root but not as a regular user. I
have found some posts that suggest deleting ~/ooo-2.0 so it will be
recreated with appropriate permissions. However this has not worked for me.
Any
Mark Knecht wrote:
OpenOffice or OpenOffice-bin?
I'm running 2.3.1 here on my AMD64. No problems that I've seen so far.
- Mark
The actual OpenOffice that took many hours to compile on my AMD Turion
TL-50 1.6ghz laptop. :)
Thanks,
Drew
On Thu, Feb 21, 2008 at 5:51 PM, Drew Tomlinson
Neil Bothwick wrote:
On Wed, 30 Jan 2008 11:58:26 -0800, Vladimir G. Ivanovic wrote:
I cannot get bridged netwokring to work, no matter what I try. I have
searched high and low for an answer, and I have spend hours
experimenting. Bridged networking broke for me when 2.6.21 came out
and
On 12/25/2007 8:56 AM Stroller said the following:
On 25 Dec 2007, at 15:59, Drew Tomlinson wrote:
...
I'm using x11-drivers/ati-drivers-8.433 and have followed guides and
verified direct rendering is enabled (however I don't know if that
matters for displaying video).
Is this the best I
On 12/25/2007 10:19 AM Grant Edwards said the following:
On 2007-12-25, Drew Tomlinson [EMAIL PROTECTED] wrote:
I have a Gateway laptop with an integrated ATI graphics board. lspci
detects it as:
01:05.0 VGA compatible controller: ATI Technologies Inc RS485 [Radeon
Xpress 1100 IGP
On 12/25/2007 9:49 AM András Csányi said the following:
2007/12/25, Drew Tomlinson [EMAIL PROTECTED]:
I have a Gateway laptop with an integrated ATI graphics board. lspci
detects it as:
01:05.0 VGA compatible controller: ATI Technologies Inc RS485 [Radeon
Xpress 1100 IGP]
However when
I have a Gateway laptop with an integrated ATI graphics board. lspci
detects it as:
01:05.0 VGA compatible controller: ATI Technologies Inc RS485 [Radeon
Xpress 1100 IGP]
However when attempting to view a DVD at full screen, the display is a
bit jumpy as if the video hardware is not fast
Is is possible to get VMWare Workstation 6.0.2 guest OSs to work via
bridged networking on a wireless card? I've Googled and found threads
regarding this issue. This one seems to be the most relevant:
http://communities.vmware.com/thread/95630?tstart=0start=0
My post is on the 3rd page as
I attempted to build media-tv/mythtv-0.20.2_p14357 and received an
error. I Googled on the error but can find no relevant help. I don't
know much about how portage works so I am at a complete loss. Can
anyone point me in the right direction? I've included the emerge output
below:
On 8/3/2007 7:15 AM Grant Edwards wrote:
On 2007-08-03, b.n. [EMAIL PROTECTED] wrote:
Grant Edwards ha scritto:
Flashplayer 9 doesn't seem to work for me. I've tried it in
both Opera and Firefox, but for most videos (e.g. nytimes.com)
it just sits there with the spinning loading
On 6/27/2007 7:45 AM Drew Tomlinson said the following:
On 6/27/2007 1:12 AM Alan McKinnon said the following:
On Wednesday 27 June 2007, Randy Barlow wrote:
Drew Tomlinson wrote:
I ran tcpdump on eth1 and no packets are leaving the interface.
Thus I assume that's why I'm not getting
I have a laptop with ATI integrated graphics. lspci shows the graphics
card as:
01:05.0 VGA compatible controller: ATI Technologies Inc RS485 [Radeon
Xpress 1100 IGP]
I have been unsuccessful in getting X configured to work with this card
with dri enabled. I followed the guides at:
On 7/3/2007 9:36 AM James Ausmus said the following:
On 7/3/07, Drew Tomlinson [EMAIL PROTECTED] wrote:
01:05.0 VGA compatible controller: ATI Technologies Inc RS485 [Radeon
Xpress 1100 IGP]
(EE) AIGLX: Screen 0 is not DRI capable
I'm at a loss. Can some kind soul please point me
On 7/3/2007 5:19 PM Jerry McBride said the following:
On Tuesday 03 July 2007 07:55:40 pm Drew Tomlinson wrote:
On 7/3/2007 9:36 AM James Ausmus said the following:
On 7/3/07, Drew Tomlinson [EMAIL PROTECTED] wrote:
01:05.0 VGA compatible controller: ATI Technologies Inc RS485
On 7/3/2007 6:36 PM Jerry McBride said the following:
On Tuesday 03 July 2007 08:58:39 pm Drew Tomlinson wrote:
On 7/3/2007 5:19 PM Jerry McBride said the following:
On Tuesday 03 July 2007 07:55:40 pm Drew Tomlinson wrote:
On 7/3/2007 9:36 AM James Ausmus said the following
On 7/3/2007 7:01 PM Drew Tomlinson said the following:
On 7/3/2007 6:36 PM Jerry McBride said the following:
On Tuesday 03 July 2007 08:58:39 pm Drew Tomlinson wrote:
On 7/3/2007 5:19 PM Jerry McBride said the following:
On Tuesday 03 July 2007 07:55:40 pm Drew Tomlinson wrote
On 7/3/2007 7:14 PM Mark Knecht said the following:
The only thing to consider then is that your hardware is not
supported by that
driver...
That may be true. I have been unable to confirm or deny that.
Anyone else?
Thanks,
Drew
See if Michael can help you at the Phoronix forums:
On 6/27/2007 1:12 AM Alan McKinnon said the following:
On Wednesday 27 June 2007, Randy Barlow wrote:
Drew Tomlinson wrote:
I ran tcpdump on eth1 and no packets are leaving the interface.
Thus I assume that's why I'm not getting an address.
I don't know how to solve your
I have a Gateway 6454 laptop with 2.6.21-gentoo-r3 amd64 kernel running.
I am trying to set up the wireless network. I have never done this
before so I started with the Handbook's Wireless Networking section. I
begin by attempting to figure out what network card I have. lspci
reports the
My cron program is sys-process/vixie-cron-4.1-r9 and all cron jobs but
one are running as I expect. Specifically, I want the following command
to execute from cron:
/usr/share/mythtv/mythrename.pl --format %T %- %Y-%m-%d_%g-%i %A %- %S
--link /tv/pretty
However it fails to run and I get
On 4/10/2007 3:20 PM Drew Tomlinson wrote:
My cron program is sys-process/vixie-cron-4.1-r9 and all cron jobs but
one are running as I expect. Specifically, I want the following
command to execute from cron:
/usr/share/mythtv/mythrename.pl --format %T %- %Y-%m-%d_%g-%i %A %-
%S --link /tv
On 5/12/2006 9:51 AM Neil Bothwick wrote:
On Fri, 12 May 2006 09:23:06 -0700, Drew Tomlinson wrote:
Every time there's a power outage at my home, my Gentoo box fails to
start. This is because it attempts to configure the network via DHCP
before my DHCP server has finished its startup
Every time there's a power outage at my home, my Gentoo box fails to
start. This is because it attempts to configure the network via DHCP
before my DHCP server has finished its startup. Thus I'm trying to
think of a way to get the Gentoo box to wait a few minutes if DHCP
fails on boot up.
On 2/14/2006 6:32 AM Benno Schulenberg wrote:
Drew Tomlinson wrote:
I've tried both zeroing this file and removing it altogether.
Zeroing doesn't work and if I delete it, it never gets recreated.
I've even tried touching it but it remains empty. After
touching it, I chmod it to ntp:ntp
On 2/12/2006 8:01 PM Harry Putnam wrote:
Drew Tomlinson [EMAIL PROTECTED] writes:
The time server is a FreeBSD 6.0 box on my network. My other FreeBSD
box and two Windows boxes get time from it just fine. Even the Gentoo
box will set its clock with ntpd -gq. I am currently using
On 2/13/2006 12:22 PM Mark Knecht wrote:
On 2/13/06, Drew Tomlinson [EMAIL PROTECTED] wrote:
Anyway, I really appreciate your thoughts. Because this box runs
MythTV, time is *VERY* important. Imagine my surprise when I went to
watch the first day of the Olympics on to find out that my
On 2/13/2006 1:11 PM Nick Rout wrote:
If your system stopped suddenly the ntp.drfit file may have become corrupted.
As I understand it this file has a value in it that tells the system how much
drift there is in the system clock, and uses the figutre to compensate. If the
figure is way out
On 2/9/2006 8:14 AM Neil Bothwick said the following:
On Thu, 09 Feb 2006 08:02:07 -0800, Drew Tomlinson wrote:
Thanks for your reply. revdep-rebuild -p did not return anything but
maybe that's because I already tried reinstalling ivtv. I don't have
genlop on my system. What ebuild
I have Gentoo 2.6.13-r5 kernel running and have used ntpd in
broadcastclient mode to keep its time in sync on my home network. The
other day, the system suffered and abrupt shutdown due to a power
outage. Ever since then, the system clock gains about 10 seconds every
5 minutes. Also, I
On 2/9/2006 12:37 AM Neil Bothwick said the following:
On Wed, 08 Feb 2006 18:07:39 -0800, Drew Tomlinson wrote:
So I tried rebuilding ivtv but the problem persists. Thus I suspect I
deleted something I shouldn't have with 'emerge -depclean'. Any
suggestion on the best way to figure out
I'm using Gentoo kernel 2.6.13-r5 kernel on a box whose primary purpose
is MythTV. After upgrading to this kernel and reading about
periodically cleaning cruft from systems, I followed some advice about
doing something along the lines of 'emerge -depclean'. I thought
everything was fine but
On 1/21/2006 2:44 AM Neil Bothwick said the following:
On Sat, 21 Jan 2006 14:08:29 +0900, Chris White wrote:
I wanna to know KDE and Gnome which is more popular.
That's the most blatant start of a flamewar I've seen...
Ok, let's sit here and ponder. People like KDE, people like
On 1/19/2006 11:37 PM Rumen Yotov said the following:
On (19/01/06 18:15), Drew Tomlinson wrote:
On 12/29/2005 3:33 PM Drew Tomlinson wrote:
I have a AMD Athlon 2800+ processor running on a Asus A7N8X Deluxe
motherboard. This motherboard uses the Nvidia NForce2 chipset. It
has
On 12/29/2005 3:33 PM Drew Tomlinson wrote:
I have a AMD Athlon 2800+ processor running on a Asus A7N8X Deluxe
motherboard. This motherboard uses the Nvidia NForce2 chipset. It
has both an Nvidia and a 3Com 100 mbps network adapter integrated.
Initially I used the Nvidia network adapter
I've got some weirdness going on with my system after an upgrade. Seems
that some things that were compiled with gcc 3.3 don't want to run with
a kernel that was compiled with gcc 3.4. I'm not sure of this but
that's my guess, especially after re-emerging a few packages (that one
doesn't
On 1/12/2006 10:59 AM Neil Bothwick said the following:
On Thu, 12 Jan 2006 10:45:30 -0800, Drew Tomlinson wrote:
I've stopped lircd, removed all lirc kernel modules, searched the
entire file system for a file named lirc_client.o.lock, searched
Google for the same, even rebooted, and am
I have a AMD Athlon 2800+ processor running on a Asus A7N8X Deluxe
motherboard. This motherboard uses the Nvidia NForce2 chipset. It has
both an Nvidia and a 3Com 100 mbps network adapter integrated.
Initially I used the Nvidia network adapter but noticed a lot of Rx
errors. The errors and
I upgraded from 2.6.13-r5 to 2.6.14-r5 using gentoo-sources. I'm using
this machine for MythTV and I noticed lirc was not working after the
upgrade. So I tried rebuilding it but lirc 0.7.2 (the same version I
was using before) fails to build. I have no idea what's wrong and
haven't found
It was suggested to me on the MythTV list to upgrade from 0.4 to 0.5.0
or 0.5.1. However after running 'emerge --sync', portage still show
0.4.0-r2 as the latest version. I have it unmasked with the '~x86' in
package.keywords so I assume this is the latest version in the normal
portage tree.
On Saturday 10 December 2005 12:08 pm, [EMAIL PROTECTED] wrote:
I have a system on an Abit motherboard with the Nvidia GeForce 4
chipset.
Make that an NForce 4 chipset. Got confused between graphics and
motherboards. :)
here are two SATA disks in a hardward stripe
configuration using
On 12/10/2005 1:04 PM Nick Smith wrote:
On 12/10/05, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
I have a system on an Abit motherboard with the Nvidia GeForce 4 chipset.
There are two SATA disks in a hardward stripe configuration using the
controller built in to the motherboard. The
On 12/10/2005 1:17 PM Stroller wrote:
On Dec 10, 2005, at 5:08 pm, [EMAIL PROTECTED] wrote:
I have a system on an Abit motherboard with the Nvidia GeForce 4
chipset.
There are two SATA disks in a hardward stripe configuration using the
controller built in to the motherboard.
...
I booted
On 12/10/2005 1:50 PM Neil Bothwick wrote:
On Sat, 10 Dec 2005 12:08:50 -0500, [EMAIL PROTECTED] wrote:
However there is some data on the drive that I'd like to recover before
blowing the disk away. I booted the latest Knoppix dated 9/23/05 and
see two icons on the desktop for my
Someone on the MythTV list recommended I install ivtv 0.5 to get a pctv
HD-3000 card working. However portage shows the current version at
0.4-r2. Is there an ebuild for 0.5? Kicks to the portage overlay
process welcome.
Thanks,
Drew
--
Visit The Alchemist's Warehouse
Magic Tricks, DVDs,
.
Thanks anyway,
Drew
On Saturday 10 December 2005 20:25, Drew Tomlinson wrote:
Someone on the MythTV list recommended I install ivtv 0.5 to get a pctv
HD-3000 card working. However portage shows the current version at
0.4-r2. Is there an ebuild for 0.5? Kicks to the portage overlay
On 12/10/2005 3:47 PM Shawn Haggett wrote:
Drew Tomlinson wrote:
On 12/10/2005 1:17 PM Stroller wrote:
On Dec 10, 2005, at 5:08 pm, [EMAIL PROTECTED] wrote:
I have a system on an Abit motherboard with the Nvidia GeForce 4
chipset.
There are two SATA disks in a hardward stripe
On 11/5/2005 9:12 PM Nick Rout wrote:
On Sat, 05 Nov 2005 16:15:37 -0800
Drew Tomlinson [EMAIL PROTECTED] wrote:
I have a box running kernel version 2.6.13-r5, and MythTV 0.18.2 built
from portage. I'm using a video card with the nvidia nv18 chipset
(6600?). I also have a custom xorg
I have a box running kernel version 2.6.13-r5, and MythTV 0.18.2 built
from portage. I'm using a video card with the nvidia nv18 chipset
(6600?). I also have a custom xorg modeline for my widescreen HDTV. My
video card is connected via a VGA to component converter. The screen
looks good and
On 11/3/2005 12:26 PM Hans-Werner Hilse wrote:
Hi,
On Thu, 03 Nov 2005 11:11:41 -0800
Drew Tomlinson [EMAIL PROTECTED] wrote:
And lirc won't load. I get these errors when inserting the module:
tv mythtv # modprobe lirc_dev
FATAL: Error inserting lirc_dev
(/lib/modules/2.6.13-gentoo-r5
On 11/4/2005 8:52 AM Hans-Werner Hilse wrote:
Hi,
On Fri, 04 Nov 2005 06:31:55 -0800
Drew Tomlinson [EMAIL PROTECTED] wrote:
And lirc won't load. I get these errors when inserting the module:
[...]
well, and what does dmesg say? Do you have i2c support in the kernel?
What kind
I had MythTV 0.18 running just fine on a Gentoo 2.6.11-r6 kernel built
with genkernel. Then I upgraded the hardware to a Athlon 2800 XP
processor running on an Asus motherboard with an Nvidia2 chipset and
upgraded the kernel to 2.6.13-r5 from Gentoo sources using genkernel.
The system has a
On 11/3/2005 11:24 AM Christoph Eckert wrote:
But the two things I can't seem to get working are ALSA and lirc. My
sound card is an Audigy that uses the emu10k1 driver.
if the module is loaded you shoud see the card when doing a
cat /proc/asound/cards
Thank you for your response.
On 10/30/2005 9:46 AM Drew Tomlinson wrote:
On 10/30/2005 9:33 AM Holly Bostick wrote:
Drew Tomlinson schreef:
I am trying to upgrade from a 2.6.11 genkernel to 2.6.13-r5
genkernel. However when booting, I get a message about root not being
a valid root device and then a prompt to enter
I am trying to upgrade from a 2.6.11 genkernel to 2.6.13-r5 genkernel.
However when booting, I get a message about root not being a valid root
device and then a prompt to enter the correct one.
I'm a noob at this so don't assume I've done the obvious. :)
I've searched Google and it appears
On 10/30/2005 9:33 AM Holly Bostick wrote:
Drew Tomlinson schreef:
I am trying to upgrade from a 2.6.11 genkernel to 2.6.13-r5
genkernel. However when booting, I get a message about root not being
a valid root device and then a prompt to enter the correct one.
snip it appears
I wrote a script to read a smbfs mounted filesystem and make symlinks to
the files locally. The script appears to run fine interactively and
fine most of the time when run by cron. I run the script every half
hour. Over the course of a week or so, 15 - 20 defunct sh processes
show up in the
On 10/24/2005 1:04 AM Heinz Sporn wrote:
Am Sonntag, den 23.10.2005, 07:36 -0700 schrieb Drew Tomlinson:
# Create symlink from original file to $newfile in $local_dir
# specified above.
ln -s $original $local_dir/$newfile
Just a suggestion: insert a minimum
On 10/14/2005 10:02 PM A. Khattri wrote:
On Fri, 14 Oct 2005, Drew Tomlinson wrote:
I also recall reading about non-official ebuilds available at somewhere
like bugs.gentoo.org.
Is there something preventing you from doing a search in Bugzilla?
Not at all. Just needed to know
On 10/15/2005 3:38 PM Michael Kjorling wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 2005-10-15 15:25 -0700, [EMAIL PROTECTED] wrote:
I want to list the files in a directory that end in .jpg irregardless of
case. Thus after reading the bash man page, it seems I should be able to
I've used 'app-editors/easyedit' which is an ebuild of 'ee' available
from http://mahon.cwx.net/. Also on that page is 'aee' which is a
superset of 'ee'. I'd like to give it a try and was wonder if there was
an ebuild in portage. I have been unable to find one.
I also recall reading about
James Colby wrote:
Hi All -
I am wondering if anyone has any suggestions of a way to get to a
shell over the web using only port 80 or port 443. I would like to be
able to open up a shell on my gentoo box from , but I am behind a
firewall. I have searched sourcforge and freshmeat and
Alexander Puchmayr wrote:
Hi!
After upgrading the system and hence switching to kernel 2.6.13 and udev, my
nvidia device nodes are no longer available and I did not find any way to
create them automatically by udev.
According to http://www.gentoo.org/doc/en/udev-guide.xml, I have
* nvidia
Have you tried asking at [EMAIL PROTECTED] Probably like many
others here, I looked over your configs and compared the SASL part with
mine to see if there's any obvious omissions. I found none and thus,
did not post. Don't assume no one is attempting to help you just
because you've only
On 10/2/2005 2:06 PM Nick Rout wrote:
On Sun, 02 Oct 2005 08:39:52 -0700
Drew Tomlinson wrote:
On 10/1/2005 1:50 AM Nick Rout wrote:
On Fri, 2005-09-30 at 19:54 -0400, Dave Nebinger wrote:
Just set up the following recipe for postfix/courier-imapd/procmail:
:0
* ^(From|Cc
I set the ~x86 use flag for ffmpeg, getting the newest version in the
tree. However now I'm having issues. What I'd like to try is
re-emerging ffmpeg and all it's dependencies before reverting back to
the older version. Is there a way to do this with the emerge tool?
I've read the man page
On 9/16/2005 2:50 PM A. Khattri wrote:
On Fri, 16 Sep 2005, Drew Tomlinson wrote:
I set the ~x86 use flag for ffmpeg, getting the newest version in the
tree. However now I'm having issues. What I'd like to try is
re-emerging ffmpeg and all it's dependencies before reverting back
On 9/13/2005 2:30 PM Nick Rout wrote:
On Tue, 2005-09-13 at 07:06 -0700, Drew Tomlinson wrote:
I'm running a 2.6.11-r6 kernel on a box whose main purpose is MythTV.
Everything was working fine until I did an upgrade using 'emerge -uvD
world' followed with 'revdep-rebuild'. Now nvtv seg
1 - 100 of 140 matches
Mail list logo
