Re: KOREAN INSURER RETIRES 7,000 MIPS MAINFRAMES (UNCLASSIFIED)

Classification: UNCLASSIFIED Caveats: NONE The number $20 MIL over for and then $10 Mil per year .. I wonder what percentage is Software cost.That is what is prohibiting the MF from dominating as it should med to large companies. -Original Message- From: IBM Mainframe Discussion

Re: Lost consoles

Check the archives, this was discussed a few months back.. There is an OSA RESET procedure. NO IPL REQUIRED... -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Francois Paré Sent: Wednesday, June 14, 2006 11:26 AM To: IBM-MAIN@BAMA.UA.

Re: SMSPDSE virtual storage exhaustion IPL APAR OA15185

Thanks Sam, I was just visiting this a few months back. -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Knutson, Sam Sent: Wednesday, June 14, 2006 12:33 PM To: IBM-MAIN@BAMA.UA.EDU Subject: SMSPDSE virtual storage exhaustion IPL APAR OA151

Re: MQSeries CSQX105E

Try X-posting this on MQSeries List [EMAIL PROTECTED] Kevin -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Bill Widmayer Sent: Tuesday, June 13, 2006 11:33 AM To: IBM-MAIN@BAMA.UA.EDU Subject: MQSeries CSQX105E I am working with MQSeries

OSA-ICC & DS6800 sharing a HUB ?

All, Getting ready to Implement OSA-ICC. I have a 24 port HUB on my DS6800 and would like to use it to support my OSA-ICC also. So it' will be an isolated IP address of say 10.10.10.n or whatever is currently configured for the DS6800 Any thought on sharing the HUB (Cisco 5000) for both

Re: One or two CPUs - the pros & cons

Itschak, Simply speaking here..very simply.. Wouldn't a simply rule be throughput. 1 cpu cycle = 1 wall sec 2 cpu cycle = 1 wall sec So I can process twice the work with two cpus, giving that the engine speeds are consistent. However a single engine twice as fast as two slower engi

Re: Happy Birthday IBM-Main!

Too much excitement.. I meant Darren. -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Edward Jaffe Sent: Tuesday, June 06, 2006 11:11 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: Happy Birthday IBM-Main! Clark, Kevin D, HRC-Alexandria/EDS

Re: Happy Birthday IBM-Main!

Darrell, is this trueBut I didn't even get the list a gift. -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Richards.Bob Sent: Tuesday, June 06, 2006 10:13 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Happy Birthday IBM-Main! I hope I marked this

Re: Slightly off topic

Richard, Explain to them that you will do what is necessary to arrive and depart at the desired times, nd support weekend and evening tasks. That way you have not committed you family. You may also find that sharing a home with someone near work may be better. Keep your options open and the co

Re: What could cause INV-NAME?

Tim, Cris has valid points. Some vendors take more risk by change proposed RFC responses. The interpretation of the RFCs are critical to it actual working with different server & clients. Years ago when I worked at a TCPIP company doing level 2 support, we simply relied on our disciple of cap

Re: What could cause INV-NAME?

Tim, Check the terminal name is needs to be consistent such as: IBM-3278-3-E Review the TN3270 RFC - there should be a DO negotiation process. Kevin riginal Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Tim Pinkawa Sent: Monday, June 05, 2006 1:25

Re: LOAD parm question

Rob, 00-ff covers any characters. Are you saying you want to use special symbols , such as LOAD## and LOAD%& in additional to 00-99 and AA thru ZZ. I would say "NO" it not supported... Think of the different keyboards that may not have some symbols. I sure one of the smart guys on the is list

Re: Micorcode level display

I do a CA-SYSVIEW STATUS and get the below so it must be kept incore somewhere. Architecture Level 2 z/Architecture, Real Storage 6.56G, Expanded Storage n/a, JES Node xx, Sysplex Name x Sysplex Mode MONOPLEX, Hardware Name

Re: MIH at VSE

Are you under VM. If so there is MIH issue " Q MIH " -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Horst Sinram Sent: Thursday, May 25, 2006 2:38 PM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: MIH at VSE On Thu, 25 May 2006 11:04:16 -050

Re: Need Suggestions - Best Way To Ship Secure Reports from Mainf rame to Users

Bob, Encrypt the file and then transmit. Have a different key for each school that you publish on a key ring. Since your are in the Financial area. You will have to consider SSL at some point, -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of

Re: FDR MESSAGE - FDR998

Willie, "For the future is there an easier way to find the error instead of looking EXCP counts?" Don't print, leave in Q or save to a file. Do a search on "FDR" toy will get every FDR messages that was produced in your listing. After all "It was tucked away in the output listing:" the above

Re: MQ priority settings in z/os

Hello Clark, Follow that data. Defuse the wait conditions as much as possible. (is it a valid wait ?) Place the MSTR and CHIN s started tasks, but by all means use ENCLAVES for the actual transactions or programs that treverse the MQ/CICS/DB2 address spaces. Kevin -Original Message---

Re: Converting hardware reserves for ACF2 databases

George, I thought that the ACF2 reserves were to be left alone. ACF2 does a better job of this than GRS or MIM could do. Put ACF2 DB on a volume by itself. I would have to reread the 8.0 book. Kevin -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On B

Re: Reading 3490E Cartridge on 3480E Device

No can do... If you are heavily leveraged in the 3480 area, than obtain a used 3490e single drive to support this. However at some point 3490e to 3590 will be every where. Maybe exploring FTP from the "Data Feeding Agency" would be another solution that's independent of physical media. Kevin -

Re: LINKLST into EXTENTS

Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Clark, Kevin D, HRC-Alexandria/EDS Sent: Thursday, May 04, 2006 2:08 PM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: LINKLST into EXTENTS Why not just add the member into another link list library until you fix the extent issue. Do the refresh on

Re: LINKLST into EXTENTS

Why not just add the member into another link list library until you fix the extent issue. Do the refresh on only that library. -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Desi de la Garza Sent: Thursday, May 04, 2006 1:31 PM To: IBM-MAIN@

Re: International Mainframe Survey: (how many, were, M IPS, Indus try, etc) http://www.arcati.com/yearboo k-06.pdf

Good Stuff. I had never heard of this until a few weeks back. Perhaps in 2007 they can post here to obtain respondents. -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Phil Payne Sent: Wednesday, May 03, 2006 3:03 PM To: IBM-MAIN@BAMA.UA.EDU S

International Mainframe Survey: (how many, were, MIPS, Indus try, etc) http://www.arcati.com/yearbook06.pdf

http://www.arcati.com/yearbook06.pdf Kevin D. Clark Senior Z/OS Systems Programmer 703-325-7021 Classification: UNCLASSIFIED Caveats: FOUO -- For IBM-MAIN subscribe / signoff / archive

Re: Anyone have a good guess as to current number of z or 390 sho ps?

The enclosed link points to a PDF with your answer and more I believed. -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Charles Mills Sent: Tuesday, May 02, 2006 1:24 PM To: IBM-MAIN@BAMA.UA.EDU Subject: Anyone have a good guess as to current

Re: Master Catalog maxed out w/19k Alias.

Tony, Thanks, I can do the math and revise my maximum as it relates to 5 usercats. As far as the 19KGilda Radnor of SNL used to say "NeverMind" Kevin -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Tony Brown Sent: Wednesday, April 26,

Re: Master Catalog maxed out w/19k Alias.

nframe Discussion List > [mailto:[EMAIL PROTECTED] On Behalf Of Clark, Kevin D, > HRC-Alexandria/EDS > Sent: Wednesday, April 26, 2006 10:47 AM > To: IBM-MAIN@BAMA.UA.EDU > Subject: Master Catalog maxed out w/19k Alias. > > Hello all, > > I have a current work around for

Re: Multi-level Alias

Dave, If they are master catalog aliases. Then there is a limitation of the size of the record. 32K. Just posted my issue:Master Catalog maxed out w/19k Alias. Kevin -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Jousma, David Sent: Frida

Master Catalog maxed out w/19k Alias.

Hello all, I have a current work around for this issue : (delete all unused aliases around 10k.) My question(s) : What if I had 19K active TSO users. Say 30,000. My Coworker says that we would have to reengineer our dataset naming standards and make TSO alias another qualifier other the HL

Re: JES2: Restoring OFFLOAD tape from DR.

CORRECT...ADDED TO USERCAT AND IT WORKED. -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Ed Finnell Sent: Thursday, April 06, 2006 1:27 PM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: JES2: Restoring OFFLOAD tape from DR. In a message dated 4/6/2

JES2: Restoring OFFLOAD tape from DR.

Help, I offloaded the my DR jobs using $soffload1,type=transmit to a tape at DR using one of mine own scratch tapes ADI949. Now I want to restore to my test systems the contents.. Tried SL, NL and BLP. Do I need to catalog SYS3.JES.SPOFFLD1 first somewhere. Console output: $TOFFLOAD1,UNI

Re: IBM DS6000 experiences

Ned, We migrated from HDS to DS6800 last year. 1. FDRPAS - great product easy to use. 2. Get the Slideout PC monitor. Elso you will need a table next to it for the monitor. 3. Get the VPN connection for alerts, failed drives, etc...IBM will mail a new DDM (drive) and you installed it. 4. The

Re: IODF and IOCDS out of sync

NO.. You must have DYNAMIC turn on in the IOCDS...we did a POR just for that. Also, you will load the IOCDS that you had to load anyone. riginal Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Matt Simpson Sent: Monday, April 03, 2006 1:50 PM To: IBM-MAIN

Re: Job info: Wrong time in queue

What is the problem ?. These are two different jobs (1138 & 4485). 1138 has been waiting for a initiator for 23 1/2 hours, is that the issue ? Kevin -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Christian Blesa Sent: Wednesday, March 22,

Re: CA-OPS/MVS

The Knowledge base on CA-Support connect is all I know of. -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Mark Steely Sent: Wednesday, March 15, 2006 6:03 PM To: IBM-MAIN@BAMA.UA.EDU Subject: CA-OPS/MVS Is there a LISTSERV for CA products?

Re: CA's TCPAccess question.

John, I see you have your answer. This is a great list. Try FTPGREET member in the .HELP dataset //SYSHELP > > I am checking on your real question. > > Kevin -- John McKown Senior Systems Programmer UICI Insurance Center Information Technology This message (including any attachments) co

Re: CA's TCPAccess question.

John , If I understand, you want to have any client FTPs (WsFTP,IBM, MS, Exceed, etc..) that connects to a particular TCPACCESS stack on your processor to received a message, at say at : 230 User logged in, proceed. That will read " Convert to IBM FTP, ASAP" . Or is it. When they run a b

Re: Secure FTP

Cletus, Your Industry may dictate a solution. For Example Financial - Connect:Direct International - HARBOR/FT Commercial - FTP SSH Contact the site where you must transfer to and from and gather a consensus of product standards from them. Kevin -Original Message- From: IBM

Re: Encryption & SMS

I waiting toi here back from IBM on the cost of : IBM DFSMSdss Encryption feature -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Dean Montevago Sent: Monday, March 13, 2006 8:42 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Encryption & SMS Hi, I r

Re: KEEPALIVE and firewalls

-Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of glen herrmannsfeldt Sent: Wednesday, March 08, 2006 4:18 AM To: IBM-MAIN@BAMA.UA.EDU Subject: KEEPALIVE and firewalls Jan Vanbrabant <[EMAIL PROTECTED]> wrote: > Subject: which softwares honour

Re: CLEAR SUBCHANNEL INTERRUPT MISSING on OSA ICC

Craig, When you do a D Consoles- is it there ? perhaps a V XXX,CONSOLE Check the LU defined to see if it is active. -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Kittendorf, Craig Sent: Wednesday, March 01, 2006 12:59 PM To: IBM-MAIN@

Re: CA-OPERA to CA-OPS/MVS

Mark, True, there is no conversion program. Our Sysprog on this task, is simply rewriting the rules. However, we used the same control character, so no documentation changes. It's for the best, since you want to remove any timers ( wait 1) and make the rules event driven (if msg = ). Kevin

Re: 3590 shared between systems.

Hello, Not an exact answer to your question. However this company make windows support for 3590s. http://www.cartagena.com/index.html Kevin -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Bodra - Pessoal Sent: Wednesday, February 08, 2006

Re: DS 6800 configuration question

We started in 1750 mode. There is a product called Capacity Magic (IBM SE and Business partner use only) they may answer this question. If there are 3390-3 already with 6+2+2 (spare and Parity) per array , then I would think not... Kevn -Original Message- From: IBM Mainframe Discuss

Re: DR for a single VTS shop.

. We use the VTS primarily for onsite (non-HSM) data. Hope this helps, Ed "Clark, Kevin D, HRC-Alexandria/EDS" <[EMAIL PROTECTED]> Sent by: IBM Mainframe Discussion List 02/02/2006 11:52 AM Please respond to IBM Mainframe Discussion List To IBM-MAIN@BAMA.UA.EDU cc

DR for a single VTS shop.

Hello all, Does anyone take VTS (IBM 3494) stack volumes to a DR site for application tape processing ? Can this be done ? Kevin Clark. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMA

Re: Billing for SRB Time

1) Do you ignore SRB CPU time and not charge for it as part of your accounting algorithm? NOif you are a DB2 shop, most of your time is here. These enclaves are becommig more and more useful for tracking usage. 2) Do you charge for SRB CPU time, but use a different rate than for TCB CPU t

Re: HMC: Optical Network - Hardware messages

Talked with IBM. No there is no way to filter certain CHPID out of Call Home. -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Clark, Kevin D, HRC-Alexandria/EDS Sent: Thursday, December 29, 2005 2:25 PM To: IBM-MAIN@BAMA.UA.EDU Subject: Re

Re: HMC: Optical Network - Hardware messages

al Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of R.S. Sent: Thursday, December 29, 2005 11:41 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: HMC: Optical Network - Hardware messages Clark, Kevin D, HRC-Alexandria/EDS wrote: > Yes, that will work. > > But I

Re: HMC: Optical Network - Hardware messages

Yes, that will work. But I need to disable the CALL HOME function for non-IBM equipment. (STK tape drive, printers) Kevin -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Ed Finnell Sent: Thursday, December 29, 2005 10:52 AM To: IBM-MAIN@B

HMC: Optical Network - Hardware messages

All, Is there a way to eliminate certain ESCON chpid from calling IBM ? Kevin -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the

Re: DFHSM daily space mgmt - Migrate GDS with ENQ on GDG base?

Scott, I believe there are options in the ALLOCxx member for this now. Kevin -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Tom Brannon Sent: Thursday, December 22, 2005 12:37 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: DFHSM daily space mgmt

Re: STK HSC/Libstation move

Tim, So are you saying the session establishment fails ? If so then , MTU would be a good start. Kevin -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Leitner, Timothy Sent: Monday, December 19, 2005 4:07 PM To: IBM-MAIN@BAMA.UA.EDU Subjec

Re: z/OS V1.7 ServerPac DeliveryTime

I went through ShopZseries..updated my inventory and received my 1.7 in 8 days after a few question from IBM on the new Debug Tool. inal Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Brian Peterson Sent: Wednesday, December 14, 2005 1:40 AM To: IBM-MAIN@

Re: HSM and CA-Disk

Tom, 2086-350 Z/890 about 27k per year for HSM. Kevin -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Tom Brannon Sent: Wednesday, November 16, 2005 11:55 PM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: HSM and CA-Disk Allan, You indicated "pr

How much real is required for 64-bit

Question: I have a few lpars with 192MB of real defined. Would that be enough for 64-bit testing ? Kevin -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET

Re: How to get from Z/OS 1.4.0 to 1.4.2 (quickly)

All, It seems I just receive and apply Upgrade ZOSV1R4, Subset BCP7727: Kevin -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Clark, Kevin D, HRC-Alexandria/EDS Sent: Monday, October 31, 2005 8:29 AM To: IBM-MAIN@BAMA.UA.EDU Subject: How

How to get from Z/OS 1.4.0 to 1.4.2 (quickly)

Anyone, What's the best way to get to JBB7727 (1.4.2) from 1.4. ? I am about to order 1.7, however I could used the Console Restructure feature now. Since 1.7 migration will be next Feburary'06. Kevin -- For IBM-MAIN subscr

Re: Happy birthday IBM Research

John, Forget about the 60 years..how about : In the last 12 years, IBM has received 29,021 patents-- Anyone know if Microsoft/Dell or other PC (HW/SW) makers come close being true innovators. Kevin -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Beh

Z/890 CTC - Is there still a jumper cable available ?

All The 9672s use to have a special jumper cable for escon ctc. But I heard of a special black cable built into the Z/890 . Has anyone any knowledge of this "special Black Cable" , I am going down to open box now... Kevin --

Re: WEBSPHERE: install on Z/OS USS or Z/OS LINUX ?

DU Subject: Re: WEBSPHERE: install on Z/OS USS or Z/OS LINUX ? In <[EMAIL PROTECTED]>, on 09/22/2005 at 04:00 PM, "Clark, Kevin D, HRC-Alexandria/EDS" <[EMAIL PROTECTED]> said: >A need a quick consciences on installing websphere applications and >some

Re: Can't vary offline

F catalog,unallocate(catalog_name) original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Dean Montevago Sent: Monday, September 26, 2005 12:34 PM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: Can't vary offline Did you close and unallocate the catalog from th

Re: WEBSPHERE: install on Z/OS USS or Z/OS LINUX ?

? > -Original Message- > From: IBM Mainframe Discussion List > [mailto:[EMAIL PROTECTED] On Behalf Of Clark, Kevin D, > HRC-Alexandria/EDS > Sent: Thursday, September 22, 2005 3:00 PM > To: IBM-MAIN@BAMA.UA.EDU > Subject: WEBSPHERE: install on Z/OS USS or Z/OS LINU

WEBSPHERE: install on Z/OS USS or Z/OS LINUX ?

Hello All, A need a quick consciences on installing websphere applications and some non-IBM products on the mainframe Z/os 1.4 Should I use Z/OS USS only. Or Install LINUX on Z/OS and install the products on LINUX. Thanks... ---

Re: Failure striping Harbor Incremental datasets - D37-04

The D37 is related to directory space. Did you want this to be a PS or a PO PDS ? Kevin - > -Original Message- > From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On > Behalf Of Fred Schmidt > Sent: Friday, 16 September 2005 8:54 AM > To: IBM-MAIN@BAMA.UA.EDU > Subject: Failu

BCDS corrupted: pre OS/390 1.3 - How to rebuild ?

All, I issue this command: LIST TTOC SELECT(BACKUP) I received several hundred of these messages and received no stats for each volume. : ARC0184I ERROR WHEN READING THE DFSMSHSM CONTROL DATA SET X RECORD FOR ADC352, RC=0004 By several hundred, I mean that 2607 out of 4288 volumes have these

Re: Creating IOCDS via HMC

Mike, Click on your CPC ICON and edit the profile and click on the NON-disruptive" option upper left. then save. A little red lock will appear in the upper corner of the ICON. Now proceed..if your test will crash your system. You will get a prompt loosely translated to " Do you really want to l

Re: OSA-ICC console question

-- That should have worked fine if the problem was with MVS. But is the session software on the PC has a problem, then stopping and starting just that session should do ( with the MVS V CN) . I am about to move my consoles to OSA-ICC. What Software are you using ? Our Current suite consist of QWS

Re: Converting from IBM VTS and Native tape library.

John, As TED stated: You may be the first.. You may want to document and shared later I would think the TMC would be a concern of you are change 3950 tape sizes, CA-1 COPYCAT should help Kevin Clark -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTE

Re: IHB0002A

Mary, What is it ? Is this assembler code question ? Kevin -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of mary george Sent: Tuesday, August 30, 2005 7:34 AM To: IBM-MAIN@BAMA.UA.EDU Subject: IHB0002A ll, Can anyone guide me on what is the

Re: ftp "connection closed by remote host"

Jim, Get a TCPIP trace. The Remote is sending a RST packet back to your Client. Look for anomalies before that occurs.. Kevin -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Jim McAlpine Sent: Thursday, August 25, 2005 11:37 AM To: IBM-MAIN

Re: DFHSTUP abend

Mehrdad, We would need to see your SYSIN members. But first, verify that your have some CICS SMF records on the MAN datasets. Type 110 Kevin -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Mehrdad Rastegar Sent: Tuesday, August 23, 2005