Hello,
Problem got resolved. It was a problem with the Catalog. Non of my
NETVIEEW dataset were catalogged. So I created alias in NETVIEw catalog.
And then modified my PROG member for APF. Now NETVIEW screen is
working.
Thanks & Regards
Saurabh
On Wed, Nov 23, 2011 at 3:35 PM,
Hi Saurabh,
One way you can get the actual library name for CNMLINK:
1. Crank up SMP/E and search your TARGET zone for the LMOD that is named
in your S806-4 messages. The LMOD entry should give you a LIBDEF name
for the library containing the LMOD.
2. Again using SMP/E, look in your TARGET z
>
> Also I dont have CNMLINK. I just have ACNMLINK in below dataset, and
CNMINIT
> member exist in this.
There are two datasets created by SMP/E process
TLIB and DLIB
The TLIB will have a name like CNMLINK or it might be called SCNMLINK. It
will depend on your version of Netview.
The DLIB will
Thanks. I will follow the steps provided by you and keep you updated with
my progress./
Regards
Saurabh
On Thu, Nov 24, 2011 at 7:40 PM, Lizette Koehler wrote:
> Have you followed the Installation process.
>
> From the V5R3 manual Tivoli NetView for z/OS, Version 5.3 (Revised
> September 2008)
Have you followed the Installation process.
>From the V5R3 manual Tivoli NetView for z/OS, Version 5.3 (Revised
September 2008)
Member PROGxx contains the names of program libraries that you want the
system to concatenate to SYS1.LINKLIB and libraries that you want to define
as authorized with t
On Thu, 24 Nov 2011 12:09:48 +0530, saurabh khandelwal
wrote:
>Hello,
>I added my STEPLIB libraries to ROG00 and IPL'd system again.
>but still getting same error ..
>
>I have added DLIB.NV390.V5R3.ACNMLINK dataset on my PROG member.
>
>RC S0C4 and resason code 11 for below step.
T
List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
saurabh khandelwal
Sent: 24 November 2011 12:41
To: IBM-MAIN@bama.ua.edu
Subject: Re: NetView Startup problem
Hello,
I have subsystem entry in my IEFSSN00 member.
SUBSYS SUBNAME(NETV)
Also I dont have CNMLINK. I just have ACNMLINK in below dataset
>
> Hello,
>I have subsystem entry in my IEFSSN00 member.
>
> SUBSYS SUBNAME(NETV)
>
> Also I dont have CNMLINK. I just have ACNMLINK in below dataset, and
CNMINIT
> member exist in this.
>
> DLIB.NV390.V5R3.ACNMLINK(CNMINIT)
>
>
> Thanks & Regards
> SAurabh
>
Saurabh,
You may
Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Walter Marguccio
Sent: 24 November 2011 11:54
To: IBM-MAIN@bama.ua.edu
Subject: Re: NetView Startup problem
> From: saurabh khandelwal
> I changed region parameter. But System is not allowing me to
NetVIEW V5R3
Regards
Saurabh
On Thu, Nov 24, 2011 at 4:23 PM, Walter Marguccio <
walter_marguc...@yahoo.com> wrote:
> > From: saurabh khandelwal
>
>
> > I changed region parameter. But System is not allowing me to change
> > DPRTY to 1980. So I left it as old one. (13,13). but still same error.
gement/SAP-Mf
> Dow Benelux B.V.
>
> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On
> Behalf Of saurabh khandelwal
> Sent: 24 November 2011 07:40
> To: IBM-MAIN@bama.ua.edu
> Subject: Re: NetView Startup problem
>
> Hello
35:59
To:
Reply-To: IBM Mainframe Discussion List
Subject: Re: NetView Startup problem
Thanks for your help.
I changed region parameter. But
System is not allowing me to change DPRTY to 1980. So I left it as old one.
(13,13). but still same error.
STMT NO. MESSAGE
2 IEFC001I PROC
> From: saurabh khandelwal
> I changed region parameter. But System is not allowing me to change
> DPRTY to 1980. So I left it as old one. (13,13). but still same error.
which release of NetView do you have ?
Walter Marguccio
z/OS Systems Programmer
BELENUS LOB Informatic GmbH
Munich - German
Dow Benelux B.V.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
saurabh khandelwal
Sent: 24 November 2011 07:40
To: IBM-MAIN@bama.ua.edu
Subject: Re: NetView Startup problem
Hello,
I added my STEPL
Thanks for your help.
I changed region parameter. But
System is not allowing me to change DPRTY to 1980. So I left it as old one.
(13,13). but still same error.
STMT NO. MESSAGE
2 IEFC001I PROCEDURE NETVSSI WAS EXPANDED USING SYSTEM LIBRARY
TIVOLI.PR
IEF695I START NETVSSI WITH JOBNAME
>PGM=CNMINIT,TIME=1440,REGION=6144K,PARM=(8192,2048,'%','SYSTEM','PPI','*NOARM'),
DPRTY=(13,13)
Two things:
1. Why such a small region? IBM has recommended REGION=0M for aeons. This could
be a cause of the 0C4.
2. Specifying DPRTY is so 1980.
-
Ted MacNEIL
eamacn...@yahoo.ca
Twitter
CNMPPNOT FOUND
> > > 07.52.37 STC00667 CSV028I ABEND806-04 JOBNAME=NETVIEW
>
> Module CNMPP should be in SYS1.NETVIEW.CNMLINK
> Check LINKLIST or STEPLIB
>
> -----Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On
> Behalf Of
:IBM-MAIN@bama.ua.edu] On Behalf Of
saurabh khandelwal
Sent: Wednesday, November 23, 2011 7:35 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: NetView Startup problem
Thanks all of you. I will try to check the Netview library for APF
authorization.
also I will post this problem on Netview group. Tha
Thanks all of you. I will try to check the Netview library for APF
authorization.
also I will post this problem on Netview group. Thanks again.
On Wed, Nov 23, 2011 at 5:56 PM, Chris Mason wrote:
> Saurabh
>
> > Please help me to resolve this issue
>
> I tend not to deal with "issues", but rat
Saurabh
> Please help me to resolve this issue
I tend not to deal with "issues", but rather more with "problems" and, this
being a case of something you apparently expected to work but which clearly
didn't (note the apostrophe), I would classify as a *problem*.
The appropriate "forum" for deal
On Wed, 23 Nov 2011 15:35:56 +0530 saurabh khandelwal
wrote:
:>Hello,
:>I am trying to bring up Netveiw address spaces. but I proc is
:>abended with 0C4. I tried isolating using help of google but it didnt
:>helped me much.
:>
:>1) S NETVSSI
:>
:> STMT NO. MESSAGE
:> 2 IEFC
Hello,
I am trying to bring up Netveiw address spaces. but I proc is
abended with 0C4. I tried isolating using help of google but it didnt
helped me much.
1) S NETVSSI
STMT NO. MESSAGE
2 IEFC001I PROCEDURE NETVSSI WAS EXPANDED USING SYSTEM LIBRARY
TIVOLI.PROCLIB
IEF695I
22 matches
Mail list logo
