No, I have not seen any as well
--- On Wed, 6/29/11, Frank M. Ramaekers framaek...@ailife.com wrote:
From: Frank M. Ramaekers framaek...@ailife.com
Subject: VSE-L ListServ dead?
To: IBMVM@LISTSERV.UARK.EDU
Date: Wednesday, June 29, 2011, 9:48 AM
There hasn’t been any postings on the
Karl,
Are they in your SYSTEM CONFIG file?
Bill J.
--- On Fri, 4/8/11, Karl Kingston karlkings...@ongov.net wrote:
From: Karl Kingston karlkings...@ongov.net
Subject: DIRMAINT question regarding DASD
To: IBMVM@LISTSERV.UARK.EDU
Date: Friday, April 8, 2011, 10:28 AM
Hi All.
Just
How much of that business was US based as opposed to off-shore?
--- On Wed, 2/16/11, Dave Jones d...@vsoft-software.com wrote:
From: Dave Jones d...@vsoft-software.com
Subject: Re: Watson
To: IBMVM@LISTSERV.UARK.EDU
Date: Wednesday, February 16, 2011, 10:11 AM
The mainframe certainly isn't
Best of luck to you Alan. If your travels bring you to sunny Naples, Fl, give
me a call.
Bill Janulin
ASPG, Inc.
--- On Thu, 9/2/10, Alan Altmark alan_altm...@us.ibm.com wrote:
From: Alan Altmark alan_altm...@us.ibm.com
Subject: Moving on (please don't panic)
To: IBMVM@LISTSERV.UARK.EDU
I can remember as a consode operator running a 360/30 in 1401 compatibility
mode (dialing in the card reader address and loading in the 'CID' deck). I can
also remember settubg the 'F' switch to signal the last reel of tape being read
in on a 2401 tape drive.
We also ran that machine in normal
When I worked at a bank, we had Ollivetti teller terminals that punched paper
tape transactions as well as them being entered into the system. If the
computer systems were down, the tellers could still record transactions on to
the paper tape. When the systems came back up, they had a paper
You may want to consider upgrading to IE 8
--- On Thu, 4/16/09, Dieltiens Geert geert.dielti...@inf.vanbreda.be wrote:
From: Dieltiens Geert geert.dielti...@inf.vanbreda.be
Subject: HMC remote access: Internet Explorer 7 problems
To: IBMVM@LISTSERV.UARK.EDU
Date: Thursday, April 16, 2009, 10:34
I agree.when I was working, I used the quick guides, knowing full well that
there was a more detailed install doc available.just in case.
--- On Wed, 3/18/09, Mike Hammock mike.hamm...@mainline.com wrote:
From: Mike Hammock mike.hamm...@mainline.com
Subject: Re: Please tell me I did
Hi Mark and everyone;
Sorry to hear about that. I remember working with a couple of sysprogs at 3M
when I was with Macro 4. One of the guys I worked with was Phil Erickson. I
wish you luck on your search.
To list: I have also been cut loose from my position as ASG. I also have zVM,
zOS,
IBM should have been able to tell you that the instruction set is different on
an IFL that on a standard LPAR than runs zOS, CICS, VTAM, etc.
--- On Fri, 4/25/08, Thomas Kern [EMAIL PROTECTED] wrote:
From: Thomas Kern [EMAIL PROTECTED]
Subject: Re: VTAM on an IFL?
To:
Worked for me, also
--- Wakser, David [EMAIL PROTECTED]
wrote:
Funny, it worked for me!
David Wakser
-Original Message-
From: Schuh, Richard [mailto:[EMAIL PROTECTED]
Sent: Tuesday, December 05, 2006 2:40 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: IBM sues PSI
Dave,
To list;
What is the name of the website that contains the
VM/VSE job listings?
Thks,
Bill J.
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
To list(s),
If anyone knows of an organization looking for a
VM/VSE Systems Engineer or a pre-post sales product
support representative, please let me know.
Thks,
Bill Janulin
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam
Martha,
You may want to start with the following parameter
in the FEATURES statement of your zVM SYSTEM CONFIG
member on MAINT's CF1 ( or CF2 or CF3 depending on
which extent you are using at VM IPL):
Disconnect_Timeout off ,
As I understand this parameter, it will prevent the
logoff of
To list;
We just implemented RACF/VM for a client and am
attempting to set up IS and password validation for
VM/FTP.
My DTCPARMS for FTP are set up as follows:
:nick.FTPSERVE :type.server
:class.ftp
:nick.ftp :type.class
:name.System C FTP daemon
O.K. you guys can stop laughing now. I am still in
'test mode' with RACF/VM and have located the modules.
Not too many 'live' brain cells left.
Bill J.
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
To list;
I have a CMS user that is trying to purge his RDR
files from his RDR queue. He issues the PUR RDR ALL
command and gets the READY message back but the files
are not purged.
I end up logging on to MAINT and purging his files.
Has anyone ever run into this?
Thks,
Bill J.
] wrote:
Does he have a PURGE EXEC in the search order?
Regards,
Richard Schuh
-Original Message-
From: The IBM z/VM Operating System
[mailto:[EMAIL PROTECTED]
Behalf Of william JANULIN
Sent: Tuesday, August 22, 2006 10:13 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: PUR RDR
a
system command or a standard abbreviation of one.
Regards,
Richard Schuh
-Original Message-
From: The IBM z/VM Operating System
[mailto:[EMAIL PROTECTED]
Behalf Of william JANULIN
Sent: Tuesday, August 22, 2006 10:29 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: PUR RDR ALL
To list(s);
I am considering using the ICHPWX01 to enforce a
user password naming convention on RACF/VM.
Question - documentation states that the exit must be
able to run in an XA-mode virtual machine that is
using the 370 accomodation facility.
Is this facility still available is zVM 5.2?
: The IBM z/VM Operating System
[mailto:[EMAIL PROTECTED]
Behalf Of Alan Altmark
Sent: Tuesday, August 22, 2006 11:25 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: PUR RDR ALL not working for a user
On Tuesday, 08/22/2006 at 10:13 MST, william
JANULIN
[EMAIL PROTECTED] wrote:
To list
O.K. this particular exit I am using has a BAS
instruction.
EX:BAS 14,X01A740
this is being flagged as an undefined op code.
I used VMFASM, do I need VMFHASM?
Thks,
Bill J.
--- Alan Altmark [EMAIL PROTECTED] wrote:
On Tuesday, 08/22/2006 at 11:04 MST, william JANULIN
[EMAIL
O.K. Alan, thank you for the update.
--- Alan Altmark [EMAIL PROTECTED] wrote:
On Tuesday, 08/22/2006 at 11:43 MST, william JANULIN
[EMAIL PROTECTED] wrote:
O.K. this particular exit I am using has a BAS
instruction.
EX:BAS 14,X01A740
this is being flagged as an undefined
Yes, but a few of them die everyday.
Its a good thing that we have SFPURGER around along
with VMUTIL and its WAKEUP file. One less thing to
worry about.
--- Alan Altmark [EMAIL PROTECTED] wrote:
On Tuesday, 08/22/2006 at 11:36 MST, william JANULIN
[EMAIL PROTECTED] wrote:
Probably
-0700,william
JANULIN Wrote:
} Hi Rich,
}
} Thank you for the info. Another question and I
do
} not want to send this to the list.
}
} I am trying to assemble a RACF/VM exit ICHPWX01
using
} VMFASM as recommended in the doc. Problem is that
the
} RMODE and AMODE op codes
To list(s);
We are in the process of migrating a VM/VSE system
that currently uses the 3494 VTS. The user is
currently in the process of phasing out the VTS.
However, going forward, we want to utilize the 3494
ATL without using the VTS.
Currently I have these three machines down. At some
To list(s);
We currently have VTAMPRINT/VSE running on a
client's mainframe. We wish to print reports from
their POWER queue going across to printers on our
internal network. Our network person says that he has
opened up port 9100 and we should be able to send
reports across networks on that
To list;
I am working on some mods to the iSTINCLM logmode
table that comes with VM/VTAM. According to the
instructions, I should copy the assemble file to the
2C4 'E' disk, make the changes there, assemble it,
then implement.
It looks like that when I issue the VMFASM ( I could
not use VMFHASM
To list:
Question - when setting up the HOSTS LOCAL file and
creating the HOSTS SITEINFO and HOSTS ADDRINFO files,
does VM/TCPIP have to reaccess TCPMAINT's 592 disk
after they are copied or do I have to re-cycle
VM/TCPIP?
I have a user attempting to do FTPBATCH on a VSE guest
getting Invalid
To list(s);,
O.K. I am totally lost here as to why the FTPBATCH
jobs I run in VSE cannot find the IP address of the
site. When I force the IP address via PARM data, I get
the following errors:
220 FTPD ready for new user.
07172006 114950.47
Local host connection
To list:
I recently created a HOSTS LOCAL file and did a
MAKESITE for a few DNS names. Seems to work fine with
one exception. When I do the TESTSITE command, it
looks like one of the DNS names gets truncated.
Following is the o/p from the command:
us-wat-as01.internal.jltservices.com
To lists(s);
We are in the process of migrating a VM/VSE system
that currently uses the 3494 VTS. The user is
currently in the process of phasing out the VTS.
However, going forward, we want to utilize the 3494
ATL without using the VTS.
Currently I have these three machines down. At some
To list(s):
Has anyone ever set up a Token Ring network on
VM/TCPIP in order to drive a 6262 printer that is
defined as a COAX attached printer on a VSE guest
machine. As this is all new to me, I am trying to find
the piece I need to put the network together.
Any help or examples that anyone
@LISTSERV.UARK.EDU
Subject: Re: VM users with more than 200
cylinders
It might be easier to write a quick pipeline to
read the diskmap.
william JANULIN wrote:
To list:
Does anyone have, or know where there is one, a
REXX
routine or something similar that will read the
VM
To list:
Does anyone have, or know where there is one, a REXX
routine or something similar that will read the VM
directory and list those users that have say 200
cylinders or more of MDISK space.
Thks,
Bill J.
__
Do You Yahoo!?
Tired of spam?
To list(s),
We are migrating a VM/VSE user to a new system.
Currently I am running into some trouble initializing
the TCPIP for VSE stack. I am getting a IPL475E
message followed by an IPL471 message. On the old
system they have DEDICATE statements for addresses
C00 thru C0f as follows:
To list(s),
Whomever answered my question earlier - thank you.
I changed my DEDICATE statements to point to the
addresses of the OSA (F000-F00F) and my TCPIP/VSE
stacks come up cleanly. Problem, I cannot PING to
those addresses from my PC and each stack can only
PING to itself. The OSA is also
To list:
What is the archive url for the VM list?
Thks,
Bill J.
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Yes, considering the average price for a house in
Calif. is aroung $800,000
--- Adam Thornton [EMAIL PROTECTED] wrote:
On May 12, 2006, at 10:05 AM, Alan Ackerman wrote:
We have an opening for a VM Systems Programmer in
Concord, CA. For
more
information, please see
To list:
Relative to my original question on setting up NFS, I
received the following question:
We want to know whats involved to have a NFS mount
from one of our VM IDs to a Windows Server.
Basically what it does is it allows VM to see a
Windows folder as if its a VM mini disk. Or vice
To list:
Thank you to everyone who replied. Looks like I need
some additional components to accomplish the requested
task.
Thanks again,
Bill J.
--- Alan Altmark [EMAIL PROTECTED] wrote:
On Tuesday, 05/02/2006 at 11:07 MST, william JANULIN
[EMAIL PROTECTED] wrote:
We want to know what
41 matches
Mail list logo