KR> Dean,Mark,Eric,Joe KR2

Hi Joe, good to see you again. Thanks for the update on your trip home. Very glad you made it home safely. I was wondering what your plans are for the NEW AIRPLANE. Is it going to be a nose or tail dragger? What engine are you planning to install in it. After your experience with your current

KR> ADS-B BendixKing by Honeywell

Here is some information that might help your research. If you need a transponder this King might be a good way to go. http://www.bendixking.com/Search-Results?searchtext=Ads-b=anyword Larry H Sent from my iPad

KR> ADS-B

One more thing about the upcoming ADS-B system. There is going to be a new set of satellites for this system put into orbit. If I understood it correctly I believe the satellites are only for our navigation and ADS-B SYSTEM. If any of us ever build our own spaceship, we will need a space debris

KR> ADS B

Nothing came through on this one Jeff Sent from my iPad > On Aug 1, 2016, at 4:52 PM, Jeff Scott via KRnet > wrote: > > > ___ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to

KR> More ADS-B CHARTS

I am going to post a few more photos of the charts I photographed that might explain a little more on the ADS-B SYSTEM if you are a little fuzzy on the subject like me. Larry H. Sent from my iPad

KR> FlightBox | Open Flight Solutions

Hello, Oshkosh is now finished for 2016. I decided to do a tiny bit of research this year at Oshkosh because of the upcoming date certain mandatory ADS-B/see and be seen thing coming. I attended a Bendix/King seminar explaining it all plus I talked to a few vendors and pilots like Rob, Mark,

KR> General Aviation ADS-B Rebate Program

Need some equipment? Get a little financial help! Larry H http://www.faa.gov/nextgen/equipadsb/rebate/ Sent from my iPad

KR> Gas Welding Aluminum: Kent White + Bonus - YouTubed

Kent White used to come to Oshkosh and give aluminum gas welding forums and gas welding and english wheel demonstrations. He was very entertaining and didn't mind making fun of anyone who asked what he considered silly or stupid questions. During his demonstrations he would occasionally use his

KR> rudder pedals

Just as a side note on bending. In our manufacturing business we've made hundreds of thousands of bends on tubing. We've owned and used Swiss made mandrel benders and regular hydraulic benders. The mandrel benders if adjusted properly maintain the roundness of the tubing as it's being bent.

KR> CONTACT! Magazine Alternative Engine Round-up and Experimental Aircraft Fly-in

I forwarded this from another group just in case some of you that live in the area are interested in attending. Also for any of you who live far away and are interested in another cross country flight out west. Larry H Begin forwarded message: > From: "Patrick Panzera editor at

KR> Bummer.../ update..

You guys fly safely, have enough good times for all of us that aren't going to make it there for the Gathering this year. If any of you think of it, a few photos during the fun would be appreciated. Larry H > On Sep 4, 2014, at 9:58 PM, Jeff Scott via KRnet > wrote: > > Joe, Terry, Paul,

KR> John Denver

John Denver was flying a Longeze that was modified a little by its builder. John Denver had a suspended pilots license at the time and wasn't supposed to be flying if I recall correctly. The Longeze fuel system original Rutan design had the fuel selector valve mounted near the floor between the

KR> FW: Words and photos

y un eventful but that wouldn't >> be any fun. The little events are what will make your journeys memories. >> Good Luck and I hope to see you again Colin. >>Larry Howell >> >> >> >> >> >> Bellow are a some l

KR> Collins KR2

Larry H > > > -- next part -- A non-text attachment was scrubbed... Name: photo 1.JPG Type: image/jpeg Size: 131814 bytes Desc: not available URL:

KR> Main gear locations

e on your own by not placing the cut angle fully against the aft face of the shear web then you will run into problems. Larry Howell

KR> Gear placement

Hi Sid, I don't want to come across as some sort of know it all or expert on KR landing gear because I have only moved the landing gear brackets from the front side of a KR2 spar/shear web to the aft side and installed new Diehl glass gear legs once on a KR2 to transform a taildragger to a

KR> KR Forum-gear placement

Steve I looked at the gear photos on your website and they are just as I remember them. The long taper towards the mounting bracket for nose wheel and the straight side that goes from bottom to top. I see a taper on the end that is the up or top end of the gear. The top cut looks perpendicular

KR> KR Forum-gear placement

Mark, Your statement below reminds me of my old Cessna 120. The Cessna 120 could nose over if the right situation arose probably mostly from applying too much braking by the pilot. Several 120s I have seen over the years had a horizontal steel bracket bolted to the normal axle bolt holes. This

KR> KR Webinar tonight

Great Job Mark Might be your best so far! Larry H > On Jul 9, 2014, at 10:51 AM, Mark Langford via KRnet list.krnet.org> wrote: > > Reminder.tonight is the EAA KR webinar, titled "Building and Flying the > Amateur-Built KR2S". > > Visit

KR> just 10 days till the Gathering

Lets see if Chris will host at Mt Vernon! LOL Larry H On Sep 23, 2013, at 6:35 PM, Larry Flesner wrote: > At 07:53 AM 9/23/2013, you wrote: >> Rub it in Larry. It is killing me that I will not be there. If I remember >> correctly, this is the only gathering I have missed since 1998. >>

KR> broken fuel line and lessons learned

"Jeff Scott" wrote: > I thought I would look that up in AC43.13. It says surprisingly little about > the fuel lines them selves, so now I'm wondering where it is that I learned > that so many years ago? > > > > I remember a small copper line from my engine going to the oil pressure

KR> Methods of Bending Wood

Here is one more link to wood bending http://www.allwoodwork.com/article/woodwork/methods_of_bending_wood.htm Larry H

KR> Steam Bending Wood

Here below is a link to steam bending wood. I typed into Google search "how to heat bend wood" Lots of links came up. http://www.primitiveways.com/bending.html Larry H

KR> WING SPAR WOOD BENDING

Some people make a way to heat the wood that they want to bend. The heat softens the sap/resin in the wood so there is probably not much if any spring back if the softened wood is placed into a jig and left for the sap/resin to reharden or normalize. I have seen photos of some vertical ovens

KR> PHOTOS FROM GATHERING?

I really hated to miss the Gathering this year. I usually have lots of photos to look at when I get home but this year I have NONE! Has anyone posted any photos anywhere? Thanks Anyone, Larry H >

KR> Judges

Bob, if pete has enough root beer, he will meet the Mark Langford criteria, if he becomes blinded in one eye, can't see clearly out of the other, looses all feeling and maybe consciousness, there you have the perfect judge! What else could you ask for other than all three of you ending up the

KR> Judges

Mark j wrote > > > What I need is some crooked judges. I have never won a trophy and have tried > paying off the judges every year and that does not even work. Heck I even > killed a deer with my KR trying to get attention. > > > Mark Jones (N886MJ) > Stevens Point, WI Mark, To win

KR> Shuttle launch, sunsets, OSH, Wings and Wheels, etc...

Is your cool project home or work related? Larry H Sent from my iPad On Jul 15, 2011, at 10:12 PM, "Mark Langford" wrote: > Joe Horton and I plan on flying in on Sunday, and Mark Jones as well. Fair > warning for those who complain of finding no KRs on the premises later in

KR> EAA survey

I have been attending the Oshkosh EAA Convention since 1978 and have been fortunate enough to have attended every year since that time. I have had many friends during all these years like some of you who have flown their homebuilt airplanes there. Some of them have been damaged by unknowing,

Fwd: KR> Peel Ply / Slurry

This never made it to the list Larry H Sent from my iPad Begin forwarded message: > From: "Larry H." > Date: March 24, 2011 12:09:50 AM CDT > To: KRnet > Subject: Re: KR> Peel Ply / Slurry > > Pat Russo wrote > I generally use Styrofoam, (blueboard), >