Re: KR> Canopy Saga continues

On 1/24/2020 9:11 PM, Craig Williams via KRnet wrote: So here is what I have found. Todds is now Aerocanopy in Indiantown FL. They have Q1 and Q2 forms but the Q2 rear shape is round where the Dragonfly is more flat on the top and sides. +

KR> Canopy Saga continues

So here is what I have found. Todds is now Aerocanopy in Indiantown FL. They have Q1 and Q2 forms but the Q2 rear shape is round where the Dragonfly is more flat on the top and sides. They will build a Dragonfly/KR2S form for $375 and then canopies would cost $675 each. I am willing to go th

Re: KR> Canopy to Rand Premold

27;fly canopy now > > days, or what folks have been using on the newer KRs, but there should be > > some flexibility to make it fit the frame. > > > > -Jeff Scott > > North Arkansas > > > > > > > > > Sent: Sunday, June 16, 2019 at 3:54 PM > &

Re: KR> Canopy to Rand Premold

e. You can > fit it to meet your needs. I'm not sure where you find a D'fly canopy now > days, or what folks have been using on the newer KRs, but there should be > some flexibility to make it fit the frame. > > -Jeff Scott > North Arkansas > > > > >

Re: KR> Canopy to Rand Premold

frame would match the longerons. The canopy frame was built and stiffened before I put the plexi in it. -Jeff - > Sent: Sunday, June 16, 2019 at 5:20 PM > From: "Jeff Scott via KRnet" > To: krnet@list.krnet.org > Cc: "Jeff Scott" &

Re: KR> Canopy to Rand Premold

4 PM > From: "mark jones via KRnet" > To: KRnet > Cc: "mark jones" > Subject: KR> Canopy to Rand Premold > > Hello All, > I am in need of your help if you have attached a premolded Rand canopy > frame to the canopy and how did you stiffen up the assembly.

KR> Canopy to Rand Premold

Hello All, I am in need of your help if you have attached a premolded Rand canopy frame to the canopy and how did you stiffen up the assembly. Right now I am torn as how to proceed with this step. This is totally different than the canopy frame I built on N886MJ.this is why I need your help. Th

Re: KR> canopy and turtledeck

Thanks Chris ... Bob Russell Winnipeg Creative Wood Design 3027 Roblin Blvd. Wpg. Mb. R3R 0B8 204-981-0762 - Original Message - From: Chris Gardiner via KRnet To: KRnet Cc: Chris Gardiner Sent: Sat, 30 Mar 2019 20:26:06 -0400 (EDT) Subject: Re: KR> canopy and turtledeck Bob, I h

Re: KR> canopy and turtledeck

Bob, I have flaps and the rear of my seat is just 1/2” or so off the plywood floor , at the lowest point. The RR canvas sling seat , I use , is hung on an aluminum tube on Adel clamps at the rear spar. The seat cushion is 2” astronaut memory foam that is quite comfortable. I’ll try to photograp

Re: KR> canopy and turtledeck

I had flaps on my KR and if I did it over again I would’ve never put them on. Put the speed break underneath like some guys have done. The flap pretty much does nothing they’re so small. I test flew five KR’s back in the day they all had flaps and then none of them did anything to speak of. Se

Re: KR> canopy and turtledeck

> +++ Bob, I wouldn't worry about the taller canopy affecting airflow over the tail.  My KR is longer but I have a rather tall canopy and standard tail surfaces, no problem. Hi Larry; Thanks for the info; I was out at my hanga

Re: KR> canopy and turtledeck

What I am wondering is, if I raise the turtledeck and canopy, fairng in the area between the front deck and canopy frame to streamline and be pleasing to the eye, do I have to do anything to the rudder and horizontal stabilizer to reflect the added 3-4 inches of height of the turtledeck? I

KR> canopy and turtledeck

Hi All; I know there has been some discussion on this previously and I did look in the archives. I found some info but just want to clarify a couple of things. I was worried about the canopy height on one of my projects and decided to measure the height on both projects I have. On Kr ... C -G

Re: KR> canopy

What do you want for the rudder n do u have a picture On Sat, Oct 20, 2018, 23:00 Oscar Zuniga via KRnet wrote: > I have a set of original KR retract gear, an original canopy, premolded > engine cowlings (for the VW), a rudder, and other original KR2 parts from > Rand Robinson. > > Located in Me

Re: KR> canopy

Sono interessa I'm interested in the canopy, can you send me a picture? Gabriele Marini gabri...@vetreriagorbini.it Il giorno dom 21 ott 2018 alle ore 05:00 Oscar Zuniga via KRnet < krnet@list.krnet.org> ha scritto: > I have a set of original KR retract gear, an original canopy, premolded > en

Re: KR> canopy

thanks, original kr2s smoky color - green like that of 15 years ago? Il giorno sab 20 ott 2018 alle ore 19:43 donald january via KRnet < krnet@list.krnet.org> ha scritto: > I can supply you with a good one. PM sent > > On Sat, Oct 20, 2018 at 12:19 AM Gabriele Marini via KRnet < > krnet@list.krne

Re: KR> Canopy

On Sun, Oct 21, 2018 at 1:49 AM Ken Henderson via KRnet < krnet@list.krnet.org> wrote: > All, > I have been in communication with Gabriele since his first post and I think > something must be getting lost in the translations or the email to Italy. I > have sent him pics of a RR canopy and measurem

KR> Canopy

All, I have been in communication with Gabriele since his first post and I think something must be getting lost in the translations or the email to Italy. I have sent him pics of a RR canopy and measurements and he asked me to send them again. Not sure what's going on. I have a spare canopy but not

KR> canopy

I have a set of original KR retract gear, an original canopy, premolded engine cowlings (for the VW), a rudder, and other original KR2 parts from Rand Robinson. Located in Medford, Oregon... halfway between Portland and San Francisco. Contact me OFFLINE, not to this list, if you are interested

Re: KR> canopy

Sorry to hijack request for canopy, computer illiterate. But does anyone have a rudder for a KR2S for sale? Thks in advance. Sent from my iPhone > On Oct 20, 2018, at 5:32 AM, donald january via KRnet > wrote: > > I can supply you with a good one. PM sent > > On Sat, Oct 20, 2018 at 12:19 AM

Re: KR> canopy

I can supply you with a good one. PM sent On Sat, Oct 20, 2018 at 12:19 AM Gabriele Marini via KRnet < krnet@list.krnet.org> wrote: > Hi everyone, I need an original RR canopy, Who has one more? > > gabri...@vetreriagorbini.it > ___ > Search the KRnet A

KR> canopy

Hi everyone, I need an original RR canopy, Who has one more? gabri...@vetreriagorbini.it ___ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http

Re: KR> Canopy pull up from aero loads

KRnet Date: 6/11/18 6:10 PM (GMT-06:00) To: inhisservice--- via KRnet Cc: Flesner Subject: Re: KR> Canopy pull up from aero loads On 6/11/2018 5:23 PM, inhisservice--- via KRnet wrote: > In the coming month I will work out a latch to hold the canopy firmly in > place and check

Re: KR> Canopy pull up from aero loads

On 6/11/2018 5:23 PM, inhisservice--- via KRnet wrote: In the coming month I will work out a latch to hold the canopy firmly in place and check it with h-stab camera again. + Consid

KR> Canopy pull up from aero loads

Larry, I agree. The age of GoPro is awesome for finding things one cannot see otherwise. I never knew my canopy lifted that far, or even at all. In the coming month I will work out a latch to hold the canopy firmly in place and check it with h-stab camera again. If anyone out there has a

Re: KR> Canopy

I have a wind screen for a KR-2. Sent from my iPad > On Oct 23, 2017, at 11:09 AM, Jason Brooks via KRnet > wrote: > > Does anyone that is parting out a KR2 have built canopy that they would > sell? > > -- > Jason Brooks > ___ > Search the KRnet A

KR> Canopy

Does anyone that is parting out a KR2 have built canopy that they would sell? -- Jason Brooks ___ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. se

Re: KR> Canopy Latch

Hi Mike, I started out in ultralights 40 years ago. I quite like them - their capabilities are often a lot more fun than just boring a hole through the sky for hours. Additionally, 2-cycle engines have become pretty reliable. Re: concerns about KR flight safety: > KR's fly just fine with aft

Re: KR> Canopy

Hi terry, We ordered the canopy 2 inch longer at both sides. So we could make a smal frame. Our headroom is oke. Check how we made is http://www.masttotaalconcept.nl/kr2/styled-13/index.html It is about the Same as mark langford made his one. Good luck. Stef > Op 13 juni 2017 om 2:19 schreef Terr

KR> Canopy

Currently own a basic KR2 with standard tip up canopy. I have acquired a Dragonfly canopy and would love to use it. It just looks better. Any advice or issues that I may run into? Headroom issues ___ Search the KRnet Archives at https://www.mai

KR> Canopy and plans needed

blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px #715FFA solid !important; padding-left:1ex !important; background-color:white !important; } I found a project located near me here in Missouri and brought it home this evening. Complete except for canopy, manual, and cow

KR> canopy

Hi Joe, We have save And easy system to lock the canopy, we Copied it from the PH-KRS I am sure it will work at your canopy to. See canopy lock at my website. Stef > Op 18 oktober 2016 om 20:36 schreef Steven Bedford via KRnet > : > > > Joe wrote: > > Hey Guys, > "Life almost got in the wa

KR> canopy

Joe wrote: Hey Guys, "Life almost got in the way of getting the canopy mounted " I am looking for ideas on how to latch my canopy. Any pics or ideas, I was thinking of using something like the ch650 system but I remember reading probably on this list that a handle protruding out the side of t

KR> canopy

er bow of the turtle deck as a positive latch and will prevent any sucking up and gaps at the top of the canopy in flight. Joe Horton, N357CJ 11 years since first flight on Oct 19th and 900 hours - Original Message - From: "KRnet" Cc: "Daniel Heath" Sent: Monday, Oct

KR> canopy

good job Joe On 10/16/2016 6:54 PM, n357cj via KRnet wrote: > Hey Guys, > Life almost got in the way of getting the canopy mounted but I did get it > done and it balanced out and fit up pretty dang good. So now That all the top > deck stuff is all working I can start finishing everything from f

KR> canopy

Very nice Joe. I really like the forward opening canopies. How do you plan to have it sealed up when closed? My Panther Building Documentation at PantherBuilder Web Site Daniel R. Heath -?Lexington, SC -Original Message- canopy mounted

KR> Canopy

Hay Joe,That canopy sure looks great, come to think of it, looks a lot like mine! Sent via the Samsung GALAXY S? 5, an AT&T 4G LTE smartphone

KR> canopy

Hey Guys, Life almost got in the way of getting the canopy mounted but I did get it done and it balanced out and fit up pretty dang good. So now That all the top deck stuff is all working I can start finishing everything from front to the back. Joe Horton N357CJ -- next part -

KR> Canopy Picture (second try...)

A non-text attachment was scrubbed... Name: Untitled.jpg Type: image/jpg Size: 33277 bytes Desc: not available URL:

KR> Canopy Cutting

Just a quick note to say, I finally cut my canopy today, and after all the prep I did (and all the worrying) it turned out to be a non-event. Now to build the frame? Matt Quimby http://kr2pilot.blogspot.com/

KR> Canopy Choices

FYI - we have the dragonfly canopy available on our website. About $135 less than direct through ACW. Steve Glover Sent from my electronic leash.

KR> Canopy Choices

with your decision. Stef -- Steph and his dad are building the KR-2S see http://www.masttotaalconcept.nl/kr2 >Origineel Bericht >Van : krnet at list.krnet.org >Datum : 20/04/2016 13:48 >Aan : krnet at list.krnet.org >Cc : vr6chrisvw at gmail.com >Onderwerp : Re:

KR> Canopy Choices

gher - but you get more drag. 3. Sorry, can't help on that. Rob Schmitt N1852Z -Original Message- From: Matt Quimby via KRnet To: krnet Cc: Matt Quimby Sent: Tue, Apr 19, 2016 11:24 pm Subject: KR> Canopy Choices Hey all, I?m about ready to purchase a canopy and get the

KR> Canopy Choices

>From Mark Langford's page. I just recently got my canopy from them. Dragonfly canopies can be bought from: Aircraft Windshield Co 10871 Kyle St. Los Alamitos, CA 90720-2410 (562) 430-8108 Chris Pryce Burlington, NJ

KR> Canopy Choices

I reread it... > 2. The original canopy looks like it would cause excess drag due to the > abrupt angle change where it meets the forward deck. The back side is more important than the front side. The nicely rounded surface guides the air around fine... the trailing edge being faired in gently

KR> Canopy Choices

Matt Quimby wrote: > 1. Has anyone used the Aircraft Spruce KR2 canopy, and do you have pictures? > What about other options? > 2. The original canopy looks like it would cause excess drag due to the > abrupt angle change where it meets the forward deck. Is this a valid reason > to choose a dif

KR> Canopy Choices

gt; To: krnet at list.krnet.org > Subject: KR> Canopy Choices > From: krnet at list.krnet.org > CC: crazymonkey16 at ptd.net > > Hey all, I?m about ready to purchase a canopy and get the top half of this > boat shaped. I really like the way those Dragonfly canopies look, but they

KR> Canopy Choices

Hey all, I?m about ready to purchase a canopy and get the top half of this boat shaped. I really like the way those Dragonfly canopies look, but they don?t seem to be available anymore. Three questions: 1. Has anyone used the Aircraft Spruce KR2 canopy, and do you have pictures? What about other

KR> Canopy/Seat

However you builders do it - sling, fiberglass, wood, aluminum, combination of these, whatever - do a good job making it in such a way that there will never be any possibility of something tearing loose or breaking. There's been several instances of seats breaking during high-G pull-outs - showing

KR> Canopy/Seat

Look on line for memory foam. After wading thru all the other things that came up I found memory foam at a good price. I can't find the receipt but it ran about $135. for enough to do 4 seats in my C310. On Sunday, October 4, 2015 8:57 PM, Phillip Hill via KRnet wrote: Trampoline fabr

KR> Canopy/Seat

Memory foam is becoming universal. I find it in mattress toppers in the Goodwill aviation store. Pillows too. There are many grades of firmness. Put a layer of firm on the bottom, softest on top. Peter

KR> Canopy/Seat

oe Nunley CW2 US Army RetiredBaker JROTC Instructor Baker Florida > > Original message > From: Chris Gardiner via KRnet > Date: 10/04/2015 5:15 PM (GMT-06:00) > To: KRnet > Cc: Chris Gardiner > Subject: Re: KR> Canopy/Seat > > Joe, > I use t

KR> Canopy/Seat

Trampoline fabric makes for a good sling seat. On Sun, Oct 4, 2015 at 8:28 PM, peter via KRnet wrote: > Memory foam is becoming universal. I find it in mattress toppers in the > Goodwill aviation store. Pillows too. There are many grades of firmness. > Put a layer of firm on the bottom, softest

KR> Canopy/Seat

Joe, I use the RR canvas sling seat and a 2 inch memory foam cushion that conforms to my butt as it warms up . At 5 foot 10 , I have an inch or so to the canopy with this set up. Regards Chris Gardiner KR2S Sent from my iPad > What do you use? > > Joe Nunley CW2 US Army RetiredBaker JROTC

KR> Canopy/Seat

(GMT-06:00) To: KRnet Cc: Chris Gardiner Subject: Re: KR> Canopy/Seat Joe, I use the RR canvas sling seat and a 2 inch memory foam cushion that conforms to my butt as it warms up . At 5 foot 10 , I have an inch or so to the canopy with this set up. Regards Chris Gardiner KR2S

KR> Canopy/Seat

: krnet at list.krnet.org Cc: "T. W. Norman" Subject: KR> Canopy/Seat Good evening, I've been able to finish my seats, and I am very pleased with the results.However (you know how it is when someone says "however") I sat in the airplane (and, yes, I'll admit to ma

KR> Canopy/Seat

a via KRnet wrote: > hi mac, how much did you lower it > > also, is that bought seat? > > > > Date: Sat, 3 Oct 2015 07:16:15 +0100 > To: krnet at list.krnet.org > Subject: Re: KR> Canopy/Seat > From: krnet at list.krnet.org > CC: mac.xm657 at gmail.com > &g

KR> Canopy/Seat

hi mac, how much did you lower it also, is that bought seat? List-Post: krnet@list.krnet.org Date: Sat, 3 Oct 2015 07:16:15 +0100 To: krnet at list.krnet.org Subject: Re: KR> Canopy/Seat From: krnet at list.krnet.org CC: mac.xm657 at gmail.com This is how I did mine Trevor-Just lower

KR> Canopy/Seat

This is how I did mine Trevor-Just lower the bucket to fit. I'm 5ft 9 and it worked for me. All the best. Mac UK On Sat, Oct 3, 2015 at 4:17 AM, T. W. Norman via KRnet wrote: > > > Good evening, > > > > I've been able to finish my seats, and I am very pleased with the > results.However (you kno

KR> Canopy/Seat

W. Norman" Subject: KR> Canopy/Seat Good evening, I've been able to finish my seats, and I am very pleased with the results.However (you know how it is when someone says "however") I sat in the airplane (and, yes, I'll admit to making airplane noises too) and I lowe

KR> Canopy/Seat

Good evening, I've been able to finish my seats, and I am very pleased with the results.However (you know how it is when someone says "however") I sat in the airplane (and, yes, I'll admit to making airplane noises too) and I lowered the canopy-the result was needing to cock my head to the rig

KR> Canopy hinge

One I was told about by the builder in W Australia.He taxied out with his side mounted canopy int the part latched position to get some airflow thru the cockpit. Forgot about it till he took off, and became aware of it by the extra noise. Tried to close it but the lift generated by the canopy (

KR> Canopy hinge

there other canopy options for PAul to consider and the answer is a > resounding yes. > Joe Horton > > - Original Message - > From: "bjoenunley via KRnet" > To: "n357cj via KRnet" > Cc: "bjoenunley" > Sent: Tuesday, May 12, 2015 10:58

KR> Canopy Hinge

I agree with everyone that a forward hinged canopy is safest and a better idea for several other reasons (although a rear-sliding canopy is probably even better). Mine is side-hinged but I've never had any incidents with it. One reason perhaps is I have a printed question on the lip of the panel

KR> Canopy hinge

List-Post: krnet@list.krnet.org Date: May 13,2015 Subject: Canopy hinge location Joe; When I was starting to test my Kr-2, stock built with initial canopy mount on the right side, I experienced a mishap which ended up costing me a new canopy and many more hours of work to repair. I was trailer

KR> Canopy hinge

; Sent: Tuesday, May 12, 2015 10:58:04 PM Subject: Re: KR> Canopy hinge My canopy is rear sliding.? Joe 'I don't think rear sliding has been done or is practical for KR shape." Joe Horton Sent from my Verizon Wireless 4G LTE smartphone _

KR> Canopy hinge

ely on the ground.? Joe Florida Sent from my Verizon Wireless 4G LTE smartphone Original message From: Paul Visk via KRnet Date:05/12/2015 9:26 AM (GMT-06:00) To: KRnet Cc: Paul Visk Subject: Re: KR> Canopy hinge I'm with Mark L. on not opening the canopy in

KR> Canopy hinge

My canopy is rear sliding.? Joe 'I don't think rear sliding has been done or is practical for KR shape." Joe Horton Sent from my Verizon Wireless 4G LTE smartphone

KR> Canopy hinge

A guy in Kansas bought it. We tried to find it to but it back but never got an answer. Steve Glover Sent from my iPhone 6 On May 12, 2015, at 12:59, Mike Stirewalt via KRnet wrote: >> "I don't think rear sliding has been done or is practical for KR > shape." > > Steve Glover had one for sa

KR> Canopy hinge

> "I don't think rear sliding has been done or is practical for KR shape." Steve Glover had one for sale a couple years ago (or less . . . time is becoming more fluid as I get older) that had a rear-sliding canopy that was really the cat's meow. I kept pictures of it as it was one of the best loo

KR> Canopy hinge

I'm with Mark L. on not opening the canopy in? flight.+++ A decision to jump out insted of trying to land is not alway due to structural failure. I remember a conversation I had with Joe about how desolate it was out west flying to Chino. I know it's always in the back of our minds. What wou

KR> canopy hinges.

I'm with Mark L. on not opening the canopy in? flight.? I'll give a third option, similar to? Mark Jones but with more roll over? protection. # I like the rollover protection. I made a 1.5" fwd Turtle deck bulkhead out of carbon fiber and foam. ?Boy! Is this thing strong. I stood on just

KR> Canopy hinge

WE JUST HAD A MOTOR GLIDER LOSE HIS SIDE HINGED CANOPY IN FLIGHT. Gashed the fuselage, could have taken the tail off. He managed to land safely- barely. Definitely go with front hinge. Sent from my Verizon Wireless 4G LTE DROID Paul Visk via KRnet wrote: >I'm trying to decide on which way

KR> Canopy hinge

shape. Joe Horton - Original Message - From: "Paul Visk via KRnet" To: "KRnet" Cc: "Paul Visk" Sent: Tuesday, May 12, 2015 8:10:43 AM Subject: Re: KR> Canopy hinge Thanks for the replays guys. Mark, you bring up some points I didn't think of. Paul Visk Belleville Il.

KR> Canopy hinge

>. I know the currant trend is to mont it from >the front. ? But I can't get over the inability >to open the canopy in flight if you need to jump out. ++ I'm with Mark L. on not opening the cano

KR> Canopy hinge

Thanks for the replays guys. Mark, you bring up some points I didn't think of. Paul Visk Belleville Il. 618-406-4705 Original message From: Paul Visk via KRnet Date:05/11/2015 9:44 PM (GMT-06:00) To: KR EMAIL BOARD Cc: Paul Visk Subject: KR> Canopy hinge I

KR> Canopy hinge

Paul Visk wrote: >> I'm trying to decide on which way to hinge my canopy. I know the currant trend is to mount it from the front. But I can't get over the inability to open the canopy in flight if you need to jump out. Is anyone putting with a side hinge in or is everyone hinging from the fro

KR> Canopy hinge

11, 2015 9:44 PM To: KR EMAIL BOARD Cc: Paul Visk Subject: KR> Canopy hinge I'm trying to decide on which way to hinge my canopy. I know the currant trend is to mont it from the front. But I can't get over the inability to open the canopy in flight if you need to jump out. Is a

KR> Canopy hinge

I'm trying to decide on which way to hinge my canopy. I know the currant trend is to mont it from the front. ?But I can't get over the inability to open the canopy in flight if you need to jump out. Is anyone putting with a side hinge in or is everyone hinging from the front? Paul Visk Bellevill

KR> Canopy Masking

I can not find Spraylate listed with aircraft Spruce ( thanks Mark) But I found this, $49.95 per Gallon (and $30 flat post to Australia) Anyone know if is OK to get off. Phil Matheson http://generalchemicalcorp.mybigcommerce.com/helicoat-1170/

KR> Canopy

Hi Larry Do you perhaps have a photo of the motor taken from the top with just the top half of the cowl removed? I am interested to see the relation between the cowl and front of the motor and spinner. Thanks Regards Dene Collett www.denecollett.com --- This email is free from viruses and malwa

KR> Canopy

> Looks like the dragonfly >canopy has better side to side head set room. Whatever canopy you use, you can raise it off the longerons with foam and glass for additional headroom. I think my glass starts about 3 inches above the longerons. You can tell by

KR> Canopy

At 07:25 PM 6/14/2014, you wrote: >Thinking about dragonfly canopy any difference between manufacturers ++ You might consider a Pulsar also. I've always thought the Todd's canopy looked more like a large half bubble with less vertical than

KR> Canopy

Thinking about dragonfly canopy any difference between manufacturers todds or several others.price quality shipping fit ext. Looks like the dragonfly canopy has better side to side head set room.

KR> Canopy shade

al Message- From: KRnet [mailto:krnet-bounces at list.krnet.org] On Behalf Of Mark Langford Sent: Wednesday, April 09, 2014 5:42 AM To: KRnet Subject: Re: KR> Canopy shade Dene Collett wrote: > Guys I see a lot of talk about displays that are barely readable in > sunlight but I hav

KR> Canopy shade

This stuff looks interesting. ?I wonder if it would smooth out on a double contour canopy?? Paul Visk Belleville, Il 618-406-4705 Sent from my Samsung Galaxy S?4 Original message From: Craig Williams Date:04/09/2014 11:06 AM (GMT-06:00) To: KRnet Subject: Re: KR

KR> Canopy shade

Krypton makes a paint called "stained glass".? They say on the can that "it may be used on some plastics".? I have used it on acrylic with good results.? Comes in yellow , red and blue.?? I will try it on my old Colt windshield and report back. Craig Www.kr2seafury.com Sent from Yahoo Mail on

KR> Canopy shade

> "For what its worth, I bought a can of VHT Nite Shades to spray on the inside of my canopy above my head." I tried a can of Testor's translucent black tint on some scrap canopy material (actually Lexan) when I was working on getting some shade in the cockpit. The VHT product might work better b

KR> Canopy shade

Let us know how it works. I have window tint on the inside of my Mustang bubble and it is not dark enough and not very smooth either so I would like to replace it with a spray on coating. Original Message Subject: Re: KR> Canopy shade From: Jeff Lange List-Post: kr

KR> Canopy shade

Jeff; Nice! But try it on a scrap piece of plexiglass first... wait a month. Solvents (paint vehicle) are unpredictable. Peter

KR> Canopy shade

list.krnet.org Subject: KR> Canopy shade " . . . or paint the top of my bubble canopy." The RV guys often use Koger Sunshades. By now the company may have one that will fit a KR canopy.

KR> Canopy shade

Here is what I am looking to use on my canopy.? Its the Zenith 601 bubble and I will need a shade or something like this. http://www.windowtint.com/Plexi-Window-Films/ Craig www.kr2seafury.com On Wednesday, April 9, 2014 10:46 AM, peter wrote: Jeff; Nice! But try it on a scrap piece of plexi

KR> Canopy shade

For what its worth, I bought a can of VHT Nite Shades to spray on the inside of my canopy above my head. It?s a translucent black paint that is intended for the dimwits that want to black out their turn signals. Not sure what it does in the IR and UV spectrums, but it would dim the sunlight comi

KR> Canopy shade

Dene Collett wrote: > Guys I see a lot of talk about displays that are barely readable in > sunlight > but I have yet to see anybody create a glare shield over their panel. > Everybody seems to just put their panel at the end of the deck. Why not > just > extend the deck a few inches over the to

KR> Canopy shade

" . . . or paint the top of my bubble canopy." The RV guys often use Koger Sunshades. By now the company may have one that will fit a KR canopy. I've had excellent results with static-cling film I found on line. It's held up extremely well over the years. I think Wal-Mar

KR> Canopy Needed

; From: Dan Prichard > To: 'KRnet' > Sent: Tue, Mar 4, 2014 7:12 pm > Subject: KR> Canopy Needed > > > Looking for a canopy (dragon fly if possible) out west. Todd's has great > prices but shipping is pricey. Any leads? > > > > Dan Prich

KR> Canopy Needed

JC4JC1956 at aol.com, I bought some things from him. his name is Jeffery real good person to deal with Randy Moore Newbern Tn 731 589 1330 avid mark IV KR II rebuild -Original Message- From: Dan Prichard To: 'KRnet' Sent: Tue, Mar 4, 2014 7:12 pm Subject: KR>

KR> Canopy Needed

Looking for a canopy (dragon fly if possible) out west. Todd's has great prices but shipping is pricey. Any leads? Dan Prichard Portland, Or.

KR> Canopy and Spraylat

This is a good place to start. http://www.ppg.com/en/newsroom/news/Pages/20121017A.aspx I put spraylat into Bing. Apparently now, it is a PPG product. See N64KR at http://KRBuilder.org - Then click on the pics? Peoples Choice at 2013 - KR Gathering in Mt. Vernon, Il ? MVN Best KR at 2013 - KR G

KR> Canopy and Spraylat

Hello everyone, I just received my new canopy from Todd's today. It's been quite an eerie nice today. First when I went to the trucking company to pick it up, I was told the box was "crushed and punctured"! I dismantled the box on the dock before accepting the shipment, but much to my relief, t

  1   2   3   4   >