An embedded and charset-unspecified text was scrubbed...
Name: not available
Url:
http://mylist.net/private/krnet/attachments/20061122/332c5082/attachment.bat
The old lawnmower ignition is called "magneto"
ignition.
Try this on for size for a modern spin on the "old lawn mower" ignition.
Ready to install for VW guys, and I am sure not too hard to adapt to other
engines.
http://www.revmasteraviation.com/products/cdi_ignition/index.htm
Colin Rainey
broke
Hi,
There are lots of UK VW engined planes flying around on Lucas SR4
magneto ignition sets taken from 1950's era farm tractors
They produce an acceptable spark, and are very reliable but.
They are absolute hopeless at low revs, I have many times abandoned
flying for the day when my arm has go
;s shop, and how the ultralight area was
doing. Your KR and the Wagabond was not a disappointment, but the ultralight
area was almost a ghost town. I left early.
Kevin.
-Original Message-
From: jscott.pi...@juno.com
To: kr...@mylist.net
Sent: Wed, 22 Nov 2006 9:35 AM
Subject: Re: KR&
Brian,
If you are going to use 100LL especially, running both plugs will not only give
you a more complete burn, but will prevent lead fouling of the second plugs.
No matter how carefully you lean, you will still get carbon deposits, and lead
fouling on the second set if you don't keep them bur
In a message dated 11/23/03 7:48:52 PM Pacific Standard Time,
crain...@cfl.rr.com writes:
> 2 plugs will actually produce slightly more horsepower than one set. Look
> at the Nissan 8plug 4 cylinder, and the Ford Ranger 2.3L 8plug 4cylinder,
> just to name a couple. They found it to be benefi
Hey check out your plain vanilla funwifty. if you have mag drop on run
up then you know more power is made with dual ignition.
CBRomero
veedu...@aol.com wrote:
>In a message dated 11/23/03 7:48:52 PM Pacific Standard Time,
>crain...@cfl.rr.com writes:
>
>
>
>>2 plugs will actually produce sl
In a message dated 11/23/03 11:27:28 PM Pacific Standard Time,
cbrom...@alltel.net writes:
> if you have mag drop on run
> up then you know more power is made with dual ignition.
>
Assuming it isn't a timing problem.
And what if you don't have a mag drop?
What if you drop a couple of grand t
If you don't have the specified mag drop with a continental O200 on
Cessna 150 don't go flying. There is a problem with that engine. Yes
the mag drop can be manipulated by changing the timing but if the
timing is set correctly you will see a rpm drop when running on one
mag, either one, and
In a message dated 11/24/03 1:31:30 AM Pacific Standard Time,
cbrom...@alltel.net writes:
> If you don't have the specified mag drop with a continental O200 on
> Cessna 150 don't go flying.
B-17's too. But I thought the thread dealt with KR's and car engines. My
error.
-R.S.Hoover
N. Hwy 99
Acampo, CA 95220
209-609-8774
skyguy...@skyguynca.com
www.skyguynca.com
- Original Message -
From:
To:
Sent: Monday, November 24, 2003 1:05 AM
Subject: Re: KR>Ignition
> In a message dated 11/23/03 11:27:28 PM Pacific Standard Time,
> cbrom...@alltel.net writes:
>
Funny one Robert..as always you are right.
David Mikesell
23957 N. Hwy 99
Acampo, CA 95220
209-609-8774
skyguy...@skyguynca.com
www.skyguynca.com
- Original Message -
From:
To:
Sent: Monday, November 24, 2003 2:18 AM
Subject: Re: KR>Ignition
> In a message dated 11/24/03 1
this baby ever giving you any problems.
>
>David Mikesell
>23957 N. Hwy 99
>Acampo, CA 95220
>209-609-8774
>skyguy...@skyguynca.com
>www.skyguynca.com
>- Original Message -
>From:
>To:
>Sent: Monday, November 24, 2003 1:05 AM
>Subject: Re: KR>Ignition
&
the timing is
off. I spent a long time getting my electronic ignition to within a gnats ass
of the mag.
-Original Message-
From: veedu...@aol.com
Sent: Nov 24, 2003 4:05 AM
To: kr...@mylist.net
Subject: Re: KR>Ignition
In a message dated 11/23/03 11:27:28 PM Pacific Standard T
RE: and your car starts everyday and runs pretty reliably on that single
ignition system
Just something to ponder and put into your consideration pool:
When I talked to the EAA sanctioned insurance agent about getting insurance
for this new KR, besides questions about my experience, the asked
things to crash into.
-Original Message-
From: Dan Heath
Sent: Nov 24, 2003 4:55 PM
To: "kr...@mylist.net"
Subject: Re: KR>Ignition
RE: and your car starts everyday and runs pretty reliably on that single
ignition system
Just something to ponder and put into your consi
Hi Netters,
Does anyone have a wiring diagram for the Honda m/cycle CDI ignition 1980 to
1983 CB series.4 cylinder motorcycle Ignition System ?..A number of KR s have
used this system very successfully.
Thanks,
Eric,
South Africa
Sent: Sunday, July 25, 2010 1:22 PM
Subject: KR> IGNITION
Hi Netters,
Does anyone have a wiring diagram for the Honda m/cycle CDI ignition 1980 to
1983 CB series.4 cylinder motorcycle Ignition System ?..A number of KR s
have used this system very successfully.
Thanks,
Eric,
South Africa
Hi Netters,
Thanks Dean for the offer about "that" ignition.At present I have a Bosch 009
type imported from Great Plains Aircraft which is excellent.I do however wish
to install a secondary system and I need a wiring diagram to make sure.Please
contact me in SA
Address: 24 Lotus Avenue,
Air fuel mixtures are not easy to light off in a cylinder, that is why the gap
is so important. You can get the spark to jump across nearly 1/2" of open
uncompressed air, when just holding a grounded plug. But put that same plug
into the engine with just twice its recommended gap, and it will
There is one very simple and basic way to make sure your timing is on the
right stroke, the right cylinder, and pretty much the right place all at
once. This is a quick and dirty way to do it so I don't want to take away
from those that told you the more correct way.
Remove three of the four spar
I have recently acquired a brand new Bendix OFF-R-L-BOTH-START ignition switch
part number 10-357210-1. I want to use this switch to operate my two coils
independently as R or L and have the ability to run BOTH just as you would a
mag set up. I was just bench testing the switch with it hooked to
Battery only needed in start. That switch GROUNDS in the L R
BOTH, Virg
On Thu, 5 Jan 2006 20:14:33 -0600 "Mark Jones"
writes:
> I have recently acquired a brand new Bendix OFF-R-L-BOTH-START
> ignition switch part number 10-357210-1. I want to use this switch
> to operate my two coils
.com
- Original Message -
From: "VIRGIL N SALISBURY"
To:
Sent: Friday, January 06, 2006 8:18 AM
Subject: Re: KR> Ignition Switch
>Battery only needed in start. That switch GROUNDS in the L R
> BOTH, Virg
>
> On Thu, 5 Jan 2006 20:14:33 -0600 "Mark Jones"
how come no buddy's using pertronix or similar points replacement for there
disturbers.
I have look at mark Langfords and couple others redundant systems and they
all have points how come electronic ignition is trouble free most of the time?
mac n1055a
Behalf Of flymaca711...@aol.com
Sent: Saturday, October 21, 2006 10:28 PM
To: kr...@mylist.net
Subject: KR> ignition systems
how come no buddy's using pertronix or similar points replacement for there
disturbers.
I have look at mark Langfords and couple others redundant systems and they
Mark,?
? ? ?I ?was looking at WW's Critical Electrical System Diagram and though of
you.
? ? ?When your ignition ?switch failed. ?Did both sides fail or just your
primary side?
? ? WW has a DPDT switch fuel/coil on his design.?
? ? I'm thinking ?this is a single point failure possibility. ?Wouldn
Paul Visk wrote:
>> I was looking at WW's Critical Electrical System Diagram and
thought of you when your ignition switch failed. Did both sides fail
or just your primary side? WW has a DPDT switch fuel/coil on his
design. I'm thinking this is a single point failure possibility.
: KRnet Subject: Re: KR>
Ignition switch
Paul Visk wrote:
>> I was looking at WW's Critical Electrical System Diagram and
thought of you when your ignition switch failed. Did both sides fail
or just your primary side? WW has a DPDT switch fuel/coil on his
design. I
Paul Visk wrote:
>>Did the switch fail because it was undersized for a DC circuit?
I don't think so. It's supposed to be rated for 10A, and I was only
pulling 5.1A through it, and one just like it (bought at the same time
from AS&S) powered the same system on N56ML for all that time with zero
Due to the high cost of aviation plugs I decided to buy the Revmaster
conversion kit to auto plugs-that being said the
engine runs excellant but now I have unbearable ignition noise. If I had
to do it over I never would have done this. Any of you radio techs out
the know of a so
-Original Message-
From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On
Behalf Of Kenneth L Wiltrout
Sent: Saturday, June 12, 2004 2:23 PM
To: kr...@mylist.net
Subject: KR> Ignition noise
Due to the high cost of aviation plugs I decided to buy the Revmaster
conversion kit
now I have unbearable ignition noise - Any of you radio techs out there
know of a solution??
Kenneth
There is no doubt that you can solve your problem without too much
trouble (or $$). You will probably get some good advice here - if not,
join this yahoo group: http
Thanks Steve--I already sent them an Email.
Kenny
On Sat, 12 Jun 2004 21:01:24 +0200 "Stephen Jacobs"
writes:
> now I have unbearable ignition noise - Any of you radio techs out
> there
> know of a solution??
>
>
>
> Kenneth
>
> There is no doubt tha
The auto plugs should have an R in the number. These are the resistor version
of the standard plugs and will greatly reduce radio interference (Rotax changed
their plugs to resistor type for this reason). If all else fails, buy some
metal braid that is used for grounding straps, etc. Put it o
Thanks Jim-Someone told me the power wire to the radio needs to
be sheilded as the eng noise is conducted through the radio via this
wire??
On Sat, 12 Jun 2004 20:20:57 -0500 "JIM VANCE"
writes:
> The auto plugs should have an R in the number. These are the
> resistor version
"Someone told me the power wire to the radio needs to
be sheilded as the eng noise is conducted through the radio via this
wire??"
A power filter can be fitted to the power bus of the radio stack. You can see
similar devices attached to most car stereo power leads for just this reason.
Ken,
A brute force line filter at the power inlet of the radio stack is great
insurance. Then it's not important to have a shielded power wire.
The ignition noise can be getting into the radio on the power wire or on the
antenna. One quick check is to have the engine running and disconnect t
For those of u that responded, Joe at Revmaster said what did I gap the
plugs at, I told him since no instructions came with them I took the
average of what they were gapped at in the box and set them all at .030.
He said that is probably most of the problem, regap to .016 they are
trying too ha
gt; -Original Message-
> From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On
> Behalf Of Kenneth L Wiltrout
> Sent: Saturday, June 12, 2004 2:23 PM
> To: kr...@mylist.net
> Subject: KR> Ignition noise
>
>
> Due to the high cost of aviation p
rised your engine kept
running good.
Brian Kraut
Engineering Alternatives, Inc.
www.engalt.com
-Original Message-
From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On
Behalf Of Kenneth L Wiltrout
Sent: Sunday, June 27, 2004 9:15 PM
To: kr...@mylist.net
Subject: Re: KR>
Ken,
The wider plug gap will cause the voltage to build to a higher value before the
plug fires. This in turn releases more peak RF energy in a shorter time when
the plug fires. This produces a much stronger RF pulse; not good if you want
the best radio communications in the aircraft band, but
hi all i have a 1834 vw with hapi conversion and have a coil gone down looking
in the log book its the 3-4 coil its had 130 hrs
its a blue coil with 2 outlets - ht cables and one lt feed into it
i am told they are harly davidson coils
question
can i stick any coil on ,thats siutable for 12v
Well guys, the smoking gun on my ignition problems has been found. Last
weekend, at the request of William Wynne, I removed my distributor and shipped
it to him next day air for him to test my distributor on his machine. What was
found was that the shaft was worn extensively at the upper bushing
Mark Im glad to hear that your problem has been found!!! Looks
like I hit the nail on the head with that one..:)
- Original Message -
From: "Mark Jones"
To: "KRnet" ; "Corvair Net"
Sent: Friday, December 01, 2006 10:14 AM
Subject:
quot;Mark Jones" ; "KRnet"
Sent: Saturday, December 02, 2006 3:03 AM
Subject: Re: KR> Ignition problems / Hiccup
> Mark Im glad to hear that your problem has been found!!!
> Looks
> like I hit the nail on the head with that one..:)
> - Ori
list.net
2005-06-20 02:21
Veuillez répondre à KRnet
Remis le : 2005-06-20 09:07
Pour :
cc :(ccc : Serge VIDAL/DNSA/SAGEM)
Objet : KR> ignition coil failure
hi all i have a 1834 vw with hapi conversion and have a coil gone down
looking in the log book its the 3-
47 matches
Mail list logo