[Leaf-user] Setting up DSL PPPoA on router????

is before?? I am not new to LRP, I have been running one for many months, switching over to eiger2beta a month or so ago to fix an AOL Instant Messenger problem. I have about ten days to two weeks to get ready for this. -- Jeff Pierce [EMAIL PROTECTED] http://pag

[Leaf-user] Static ip for eigerstien2beta on DSL modem side?

all I should have to do is plug in the modem, boot the pre-tested DSL disk and go 10 times faster, 512Kb downsteam. -- Jeff Pierce [EMAIL PROTECTED] http://pages.preferred.com/~piercej ___ Leaf-user mailing list [EMAIL PROTECTED] http://lists.sourceforg

[Leaf-user] strange ping problem???

it arrives and be up and running. -- Jeff Pierce [EMAIL PROTECTED] http://pages.preferred.com/~piercej ___ Leaf-user mailing list [EMAIL PROTECTED] http://lists.sourceforge.net/lists/listinfo/leaf-user

[Leaf-user] Netmeeting through Eiger2

I am going to need to run Microsoft Netmeeting through a Linux Router 3.1.0, audio only no file transfers or "whiteboard", that is fire wall and NAT. Is all I have to do is to port forward the ports listed on the Microsoft netmeeting howto page? http://support.microsoft.com/support/kb/ARTICLES/Q

[leaf-user] weblet returning "No data error message

I am running dachstein and I cannot get the weblet to return data. Connecting to the router with mozilla ends up with a "This document contains no data" error. Since it isn't refusing the connection, weblet must be running. So, why no data. -- Jeff, wd4nmq [EMAIL PROTECTED] http://mywebpages.comc

[leaf-user] ftp server behind firewall

I am attempting to use an ftp server behind dach leaf. I am running ProFTPD 1.2.2rc3. Ok, on the leaf I set up port forwarding for port 2048 to go to 192.168.1.201 port 21. I log on the server using passive mode '-p' from an internal machine no problem. I then ssh to an external machine an attempt

[leaf-user] Getting serial to work under Dachstein

I have been running Dachstein for well over a year with no problems, ran Eiger before. Now, I need to remove the CRT and keyboard. So I think, no problem. Wrong. As a test I run from command line setserial -b /dev/ttyS0 uart 16450 port 0x3f8 irq 4 echo "Hello" > /dev/ttyS0 results in cannot cre

[leaf-user] Got serial working except for boot messages

I copied serial.o to /lib/modules and added it to the modules to start configuration. Then changed inittab and securetty file backed up and I can now log into dach via serial. But now I hung up on boot messages. Here is what that part of my syslinux.cfg line looks like. dnscache,weblet console=

Re: [leaf-user] Got serial working except for boot messages

I went to cable. It runs on an old 100Hhz 486 all-in-one on a full sized ISA card plugged into a 5 slot passive backplane with 2 ISA ethernet cards. Charles Steinkuehler wrote: Jeff Pierce wrote: I copied serial.o to /lib/modules and added it to the modules to start configuration. Then changed