Re: ACME Threaded Rod for LOMs - 5/8-4

Arkady,That was EASY for her.  It looks like she sent you the exact same info that I had requested from her on Tuesday morning.  I just hadn't gotten around to reading my email until several hours ago.  I bet she was wondering why two different guys were after the same info.  LoL!Mac-Original M

Re: ACME Threaded Rod for LOMs - 5/8-4

Info from Annettes email 5/8" - 4P Stub Acme Rod X 6 ft. or 12 ft. $5.80 Per Ft. Material: 1215 Low Carbon Steel Plain Delivery - same/next day Please note - 6 ft. can ship UPS - 12 Ft. must ship truck... UPS does ship upto 96" - with packaging, and they can take longer, 108", but they charge fo

Re: new here and selling

Can the administrator please remove me from the email list? I've sent two emails already to unsubscribe, but still getting my inbox blown up daily. -From: "Tim Ziegler" To: legacy-ornamental-mills@googlegroups.com Cc: Sent: Tuesday December 1 2020

Re: ACME Threaded Rod for LOMs - 5/8-4

thanks Mac more useful info. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Dec 1, 2020 at 11:36 AM M.W.Foscue wrote: > I changed to Subject line - to make this info MUCH easier to search > for/find

Re: new here and selling

Sounds good Joe Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Dec 1, 2020 at 11:01 AM 'joe biunno' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > in regards to gett

Re: ACME Threaded Rod for LOMs - 5/8-4

Joe,Good info you shared. Thanks.Most folks don't know about another "shipping service" - Greyhound Package Express.They have size & weight restrictions - but for some of the LOM items I've seen sold on our Group's threads their size/weight would fall within their limits.The maximum weight per pack

Re: ACME Threaded Rod for LOMs - 5/8-4

ok, some additional points... you could ship FedEx, up to 108 inches... so that should get you 8 ft. pcs. easily... I would stick to the delrin nuts, as using a brass nut would certainly last longer than a delrin nut, but you would be taking a chance that the brass nut could wear out the acme ro

ACME Threaded Rod for LOMs - 5/8-4

I changed to Subject line - to make this info MUCH easier to search for/find in the future.A BIG THANK YOU, Joe for the VERY useful link.I called them and talked with a very helpful lady - Annette.They sell the 5/8-4 Acme threaded rod in 6' and 12' lengths.The 6 footers are shippable via UPS; the 1

Re: new here and selling

in regards to getting the 5/8-4 acme threaded rod that Legacy used in their manufacturing of their machines, here is the link to the company Acme Screws & Threaded Rods | Dependable Acme Threaded Products ... they are located in Westbury, New York(Nassau Coun

Re: new here and selling

FYI:  I called the company Turin provided the link to (Roton Products, Inc in MO) and asked if they made/carried Acme Screw rod in 5/8-4.The answer is "no".  I asked if they knew of any place that might - answer:  "Unfortunately, no.".SIf anyone finds a source for the Acme Screw/rod used on

Re: new here and selling

Question to all. Anybody know where I can get 5/8x4 acme rod? Arkady from Ukraine. вт, 1 дек. 2020 г. в 16:50, 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com>: > No problems. > > What do you plan to do? > When there is a will there is ALWAYS a way. > > C.A

Re: Sources for the Template Follower Styluses

in regards to the follower pins, if you have one follower, could you just add bushings to that follower pin, to increase the diameter of the pin... or make one follower and add different diameter bushings to that... McMasterCarr has drill bushings of varying inside and outside diameters... only

Re: new here and selling

No problems. What do you plan to do?When there is a will there is ALWAYS a way. C.A.G. On Tuesday, December 1, 2020, 09:48:46 AM EST, Turin A wrote: Ah yes, my mistake. I looked up my old receipt but that may have been another project 5/8-4 is correct! and much harder to source. Sorry

Re: What is this part

Thanks Curt, Yea I'd prefer to have original parts and not have to switch them around. I'm a bit of a stickler like that. So if you or someone else has one that would be great. Maybe even Tim K. would know of have dimensions to match one? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specia

Re: new here and selling

Ah yes, my mistake. I looked up my old receipt but that may have been another project 5/8-4 is correct! and much harder to source. Sorry for my miss-info. On Tue, Dec 1, 2020 at 6:43 AM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Hello Truin > >

Re: new here and selling

Hello Truin 58-8 is not what Legacy used. but is easy to find on the market. The tap and or even an already made drive nut can be bought on line. Legacy WILL NOT have a match for you on that, they used 5/8-4 acme screw on all the Legacy's. But on the good side of things, I have been playing a

Re: What is this part

I would suggest that since you own two directional gears, just take one apart and use that.  Its just two screws that need to be taken out and then replaced. (keep the old gears just in case?)  OR that is a pretty simple bracket to make, why not make your own?  Take an old plow or some farm equ

Re: new here and selling

Good Morning all.. Arkady - it is an odd size at 5/8x8 and I tracked down a 8' length from Roton Products. It was $62.00USD in 2017. Here is the company page, currently at 8.07 a foot: https://www.roton.com/family/acme-right-screws-and-nuts-7059285/ Bill - I build lots of things and have no p

Re: Winner of the Legacy design kit.

Well thats sure great to hear. yay! Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Dec 1, 2020 at 1:33 AM wrote: > Yay congrats Tim I had a feeling you would win good for you buddy very > very useful

Re: new here and selling

I know Legacy sells the top piece I have bought one of those through Cindy, but as others have mentioned not sure of bottom piece. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Dec 1, 2020 at 1:36 A

Re: What is this part

Thanks Curtis, But yes I would need to find that bracket??? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 11:22 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@

Re: new here and selling

Thanks Turin lol Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 11:13 PM Turin A wrote: > I do have some pictures. I will prep them to post. > Thank you for the heads up errrwarn